Common Weakness Enumeration

CWE-400

Weakness Discouraged

Uncontrolled Resource Consumption

Abstraction: Class · Status: Draft

The product does not properly control the allocation and maintenance of a limited resource.

Dimensions

  • Behavior-Property: Uncontrolled
  • Behavior-Type: Consumption
  • Resource-Type: Resource
Mapping guidance

CWE-400 is intended for incorrect behaviors in which the product is expected to track and restrict how many resources it consumes, but CWE-400 is often misused because it is conflated with the "technical impact" of vulnerabilities in which resource consumption occurs. It is sometimes used for low-information vulnerability reports. It is a level-1 Class (i.e., a child of a Pillar).

Closely analyze the specific mistake that is causing resource consumption, and perform a CWE mapping for that mistake. Consider children/descendants.

Relationships and members
ChildOf: CWE-664 · View CWE-1000
Modes of introduction
Operation

The product could be operated in a system or environment with lower resource limits than expected, which might make it easier for attackers to consume all available resources.

System Configuration

The product could be configured with lower resource limits than expected, which might make it easier for attackers to consume all available resources.

Architecture and Design

The designer might not consider how to handle and throttle excessive resource requests, which typically requires careful planning to handle more gracefully than a crash or exit.

Implementation

There are at least three distinct scenarios that can commonly lead to resource exhaustion:

Lack of throttling for the number of allocated resources.

Losing all references to a resource before reaching the shutdown stage.

Not closing/returning a resource after processing.

Resource exhaustion problems often occur due to an incorrect implementation of the following situations:

Error conditions and other exceptional circumstances.

Confusion over which part of the program is responsible for releasing the resource.

Detection methods

Automated Static Analysis

Automated static analysis typically has limited utility in recognizing resource exhaustion problems, except for program-independent system resources such as files, sockets, and processes. For system resources, automated static analysis may be able to detect circumstances in which resources are not released after they have expired. Automated analysis of configuration files may be able to detect settings that do not specify a maximum value.

Automated static analysis tools will not be appropriate for detecting exhaustion of custom resources, such as an intended security policy in which a bulletin board user is only allowed to make a limited number of posts per day.

Effectiveness: Limited

Automated Dynamic Analysis

Certain automated dynamic analysis techniques may be effective in spotting resource exhaustion problems, especially with resources such as processes, memory, and connections. The technique may involve generating a large number of requests to the product within a short time frame.

Effectiveness: Moderate

Fuzzing

While fuzzing is typically geared toward finding low-level implementation bugs, it can inadvertently find resource exhaustion problems. This can occur when the fuzzer generates a large number of test cases but does not restart the targeted product in between test cases. If an individual test case produces a crash, but it does not do so reliably, then an inability to handle resource exhaustion may be the cause.

Effectiveness: Opportunistic

Notes

Theoretical

Vulnerability theory is largely about how behaviors and resources interact. "Resource exhaustion" can be regarded as either a consequence or an attack, depending on the perspective. This entry is an attempt to reflect the underlying weaknesses that enable these attacks (or consequences) to take place.

Other

Database queries that take a long time to process are good DoS targets. An attacker would have to write a few lines of code to generate enough traffic to exceed the site's ability to keep up. This would effectively prevent authorized users from using the site at all. Resources can be exploited simply by ensuring that the target machine must do much more work and consume more resources in order to service a request than the attacker must do to initiate a request.

A prime example of this can be found in old switches that were vulnerable to "macof" attacks (so named for a tool developed by Dugsong). These attacks flooded a switch with random IP and MAC address combinations, therefore exhausting the switch's cache, which held the information of which port corresponded to which MAC addresses. Once this cache was exhausted, the switch would fail in an insecure way and would begin to act simply as a hub, broadcasting all traffic on all ports and allowing for basic sniffing attacks.

Limited resources include memory, file system storage, database connection pool entries, CPU, and others.

Content history
Submission: CLASP · 2006-07-19 · CWE Draft 3
Contribution: "Mapping CWE to 62443" Sub-Working Group · CWE-CAPEC ICS/OT SIG · 2023-01-24 · CWE 4.10

Suggested mappings to ISA/IEC 62443.

Contribution: "Mapping CWE to 62443" Sub-Working Group · CWE-CAPEC ICS/OT SIG · 2023-04-25 · CWE 4.11

Suggested mappings to ISA/IEC 62443.

Contribution: Abhi Balakrishnan · 2025-02-25 · CWE 4.17

Provided diagram to improve CWE usability.

Modification: Eric Dalci · Cigital · 2008-07-01 · CWE 1.0

updated Time_of_Introduction

Modification: · Veracode · 2008-08-15 · CWE 1.0

Suggested OWASP Top Ten 2004 mapping

Modification: CWE Content Team · MITRE · 2008-09-08 · CWE 1.0

updated Common_Consequences, Relationships, Other_Notes, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2008-10-14 · CWE 1.0.1

updated Description, Name, Relationships

Modification: CWE Content Team · MITRE · 2009-01-12 · CWE 1.2

updated Description

Modification: CWE Content Team · MITRE · 2009-05-27 · CWE 1.4

updated Name, Relationships

Modification: CWE Content Team · MITRE · 2009-07-27 · CWE 1.5

updated Description, Relationships

Modification: CWE Content Team · MITRE · 2009-10-29 · CWE 1.6

updated Relationships

Modification: CWE Content Team · MITRE · 2009-12-28 · CWE 1.7

updated Common_Consequences, Demonstrative_Examples, Detection_Factors, Likelihood_of_Exploit, Observed_Examples, Other_Notes, Potential_Mitigations, References

Modification: CWE Content Team · MITRE · 2010-02-16 · CWE 1.8

updated Detection_Factors, Potential_Mitigations, References, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2010-04-05 · CWE 1.8.1

updated Related_Attack_Patterns

Modification: CWE Content Team · MITRE · 2010-06-21 · CWE 1.9

updated Description

Modification: CWE Content Team · MITRE · 2010-09-27 · CWE 1.10

updated Demonstrative_Examples

Modification: CWE Content Team · MITRE · 2011-06-01 · CWE 1.13

updated Common_Consequences, Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2012-05-11 · CWE 2.2

updated Demonstrative_Examples, Related_Attack_Patterns, Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2013-07-17 · CWE 2.5

updated Relationships

Modification: CWE Content Team · MITRE · 2014-07-30 · CWE 2.8

updated Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2015-12-07 · CWE 2.9

updated Related_Attack_Patterns, Relationships

Modification: CWE Content Team · MITRE · 2017-01-19 · CWE 2.10

updated Relationships

Modification: CWE Content Team · MITRE · 2017-11-08 · CWE 3.0

updated Applicable_Platforms, Demonstrative_Examples, Likelihood_of_Exploit, Potential_Mitigations, References, Relationships

Modification: CWE Content Team · MITRE · 2018-03-27 · CWE 3.1

updated References, Type

Modification: CWE Content Team · MITRE · 2019-01-03 · CWE 3.2

updated Alternate_Terms, Description, Name, Relationships, Taxonomy_Mappings, Theoretical_Notes

Modification: CWE Content Team · MITRE · 2019-06-20 · CWE 3.3

updated Related_Attack_Patterns, Relationships

Modification: CWE Content Team · MITRE · 2019-09-19 · CWE 3.4

updated Description, Relationships

Modification: CWE Content Team · MITRE · 2020-02-24 · CWE 4.0

updated Description, References, Related_Attack_Patterns, Relationships

Modification: CWE Content Team · MITRE · 2020-06-25 · CWE 4.1

updated Description, Maintenance_Notes

Modification: CWE Content Team · MITRE · 2020-08-20 · CWE 4.2

updated Relationships

Modification: CWE Content Team · MITRE · 2022-04-28 · CWE 4.7

updated Related_Attack_Patterns

Modification: CWE Content Team · MITRE · 2022-06-28 · CWE 4.8

updated Observed_Examples, Relationships

Modification: CWE Content Team · MITRE · 2022-10-13 · CWE 4.9

updated Observed_Examples, Relationships

Modification: CWE Content Team · MITRE · 2023-01-31 · CWE 4.10

updated Common_Consequences, Description, Detection_Factors, Maintenance_Notes, Related_Attack_Patterns, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2023-04-27 · CWE 4.11

updated Demonstrative_Examples, Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2023-06-29 · CWE 4.12

updated Mapping_Notes, Relationships

Modification: CWE Content Team · MITRE · 2024-11-19 · CWE 4.16

updated Relationships

Modification: CWE Content Team · MITRE · 2025-04-03 · CWE 4.17

updated Common_Consequences, Description, Diagram, Modes_of_Introduction, Other_Notes, Time_of_Introduction

Modification: CWE Content Team · MITRE · 2025-09-09 · CWE 4.18

updated Observed_Examples, References

Modification: CWE Content Team · MITRE · 2025-12-11 · CWE 4.19

updated Applicable_Platforms, Maintenance_Notes, Weakness_Ordinalities

Modification: CWE Content Team · MITRE · 2026-04-30 · CWE 4.20

updated Applicable_Platforms, Maintenance_Notes, Mapping_Notes, Other_Notes

Modification: CWE Content Team · MITRE · 2026-10-28 · CWE 5.0

updated Applicable_Platforms, Dimensions, References, Relationships, Taxonomy_Mappings

7197 vulnerabilities reference this CWE, most recent first.

CVE-2026-33204 (GCVE-0-2026-33204)

Vulnerability from cvelistv5 – Published: 2026-03-20 22:37 – Updated: 2026-03-24 15:34
VLAI
Title
SimpleJWT has an Unauthenticated Denial of Service via JWE header tampering
Summary
SimpleJWT is a simple JSON web token library written in PHP. Prior to version 1.1.1, an unauthenticated attacker can perform a Denial of Service via JWE header tampering when PBES2 algorithms are used. Applications that call JWE::decrypt() on attacker-controlled JWEs using PBES2 algorithms are affected. This issue has been patched in version 1.1.1.
SSVC
Exploitation: poc Automatable: yes Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-03-24 15:33 UTC
CWE
  • CWE-400 - Uncontrolled Resource Consumption
Assigner
GitHub_M CNA under the mitre root
CNA scorecard C 72/100 over 8156 records in the last 180 days details
References
Impacted products
Vendor Product Version
kelvinmo simplejwt Affected: < 1.1.1
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-33204",
                "options": [
                  {
                    "Exploitation": "poc"
                  },
                  {
                    "Automatable": "yes"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-03-24T15:33:43.475530Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-03-24T15:34:35.165Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "product": "simplejwt",
          "vendor": "kelvinmo",
          "versions": [
            {
              "status": "affected",
              "version": "\u003c 1.1.1"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "SimpleJWT is a simple JSON web token library written in PHP. Prior to version 1.1.1, an unauthenticated attacker can perform a Denial of Service via JWE header tampering when PBES2 algorithms are used. Applications that call JWE::decrypt() on attacker-controlled JWEs using PBES2 algorithms are affected. This issue has been patched in version 1.1.1."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400: Uncontrolled Resource Consumption",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-03-20T22:37:13.411Z",
        "orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
        "shortName": "GitHub_M"
      },
      "references": [
        {
          "name": "https://github.com/kelvinmo/simplejwt/security/advisories/GHSA-xw36-67f8-339x",
          "tags": [
            "x_refsource_CONFIRM"
          ],
          "url": "https://github.com/kelvinmo/simplejwt/security/advisories/GHSA-xw36-67f8-339x"
        },
        {
          "name": "https://github.com/kelvinmo/simplejwt/releases/tag/v1.1.1",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/kelvinmo/simplejwt/releases/tag/v1.1.1"
        }
      ],
      "source": {
        "advisory": "GHSA-xw36-67f8-339x",
        "discovery": "UNKNOWN"
      },
      "title": "SimpleJWT has an Unauthenticated Denial of Service via JWE header tampering"
    }
  },
  "cveMetadata": {
    "assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
    "assignerShortName": "GitHub_M",
    "cveId": "CVE-2026-33204",
    "datePublished": "2026-03-20T22:37:13.411Z",
    "dateReserved": "2026-03-17T23:23:58.312Z",
    "dateUpdated": "2026-03-24T15:34:35.165Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

CVE-2026-33176 (GCVE-0-2026-33176)

Vulnerability from cvelistv5 – Published: 2026-03-23 23:29 – Updated: 2026-03-24 18:42
VLAI
Title
Rails Active Support has a possible DoS vulnerability in its number helpers
Summary
Active Support is a toolkit of support libraries and Ruby core extensions extracted from the Rails framework. Prior to versions 8.1.2.1, 8.0.4.1, and 7.2.3.1, Active Support number helpers accept strings containing scientific notation (e.g. `1e10000`), which `BigDecimal` expands into extremely large decimal representations. This can cause excessive memory allocation and CPU consumption when the expanded number is formatted, possibly resulting in a DoS vulnerability. Versions 8.1.2.1, 8.0.4.1, and 7.2.3.1 contain a patch.
SSVC
Exploitation: none Automatable: yes Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-03-24 18:42 UTC
CWE
  • CWE-400 - Uncontrolled Resource Consumption
  • CWE-770 - Allocation of Resources Without Limits or Throttling
Assigner
GitHub_M CNA under the mitre root
CNA scorecard C 72/100 over 8156 records in the last 180 days details
Impacted products
Vendor Product Version
rails activesupport Affected: >= 8.1.0.beta1, < 8.1.2.1
Affected: >= 8.0.0.beta1, < 8.0.4.1
Affected: < 7.2.3.1
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-33176",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "yes"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-03-24T18:42:42.653404Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-03-24T18:42:48.858Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "product": "activesupport",
          "vendor": "rails",
          "versions": [
            {
              "status": "affected",
              "version": "\u003e= 8.1.0.beta1, \u003c 8.1.2.1"
            },
            {
              "status": "affected",
              "version": "\u003e= 8.0.0.beta1, \u003c 8.0.4.1"
            },
            {
              "status": "affected",
              "version": "\u003c 7.2.3.1"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "Active Support is a toolkit of support libraries and Ruby core extensions extracted from the Rails framework. Prior to versions 8.1.2.1, 8.0.4.1, and 7.2.3.1, Active Support number helpers accept strings containing scientific notation (e.g. `1e10000`), which `BigDecimal` expands into extremely large decimal representations. This can cause excessive memory allocation and CPU consumption when the expanded number is formatted, possibly resulting in a DoS vulnerability. Versions 8.1.2.1, 8.0.4.1, and 7.2.3.1 contain a patch."
        }
      ],
      "metrics": [
        {
          "cvssV4_0": {
            "attackComplexity": "LOW",
            "attackRequirements": "NONE",
            "attackVector": "NETWORK",
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "privilegesRequired": "NONE",
            "subAvailabilityImpact": "NONE",
            "subConfidentialityImpact": "NONE",
            "subIntegrityImpact": "NONE",
            "userInteraction": "NONE",
            "vectorString": "CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N/E:U",
            "version": "4.0",
            "vulnAvailabilityImpact": "HIGH",
            "vulnConfidentialityImpact": "NONE",
            "vulnIntegrityImpact": "NONE"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400: Uncontrolled Resource Consumption",
              "lang": "en",
              "type": "CWE"
            }
          ]
        },
        {
          "descriptions": [
            {
              "cweId": "CWE-770",
              "description": "CWE-770: Allocation of Resources Without Limits or Throttling",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-03-23T23:29:27.933Z",
        "orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
        "shortName": "GitHub_M"
      },
      "references": [
        {
          "name": "https://github.com/rails/rails/security/advisories/GHSA-2j26-frm8-cmj9",
          "tags": [
            "x_refsource_CONFIRM"
          ],
          "url": "https://github.com/rails/rails/security/advisories/GHSA-2j26-frm8-cmj9"
        },
        {
          "name": "https://github.com/rails/rails/commit/19dbab51ca086a657bb86458042bc44314916bcb",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/rails/rails/commit/19dbab51ca086a657bb86458042bc44314916bcb"
        },
        {
          "name": "https://github.com/rails/rails/commit/ebd6be18120d1136511eb516338e27af25ac0a1a",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/rails/rails/commit/ebd6be18120d1136511eb516338e27af25ac0a1a"
        },
        {
          "name": "https://github.com/rails/rails/commit/ee2c59e730e5b8faed502cd2c573109df093f856",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/rails/rails/commit/ee2c59e730e5b8faed502cd2c573109df093f856"
        },
        {
          "name": "https://github.com/rails/rails/releases/tag/v7.2.3.1",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/rails/rails/releases/tag/v7.2.3.1"
        },
        {
          "name": "https://github.com/rails/rails/releases/tag/v8.0.4.1",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/rails/rails/releases/tag/v8.0.4.1"
        },
        {
          "name": "https://github.com/rails/rails/releases/tag/v8.1.2.1",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/rails/rails/releases/tag/v8.1.2.1"
        }
      ],
      "source": {
        "advisory": "GHSA-2j26-frm8-cmj9",
        "discovery": "UNKNOWN"
      },
      "title": "Rails Active Support has a possible DoS vulnerability in its number helpers"
    }
  },
  "cveMetadata": {
    "assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
    "assignerShortName": "GitHub_M",
    "cveId": "CVE-2026-33176",
    "datePublished": "2026-03-23T23:29:27.933Z",
    "dateReserved": "2026-03-17T22:16:36.719Z",
    "dateUpdated": "2026-03-24T18:42:48.858Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

CVE-2026-33169 (GCVE-0-2026-33169)

Vulnerability from cvelistv5 – Published: 2026-03-23 23:07 – Updated: 2026-03-24 15:46
VLAI
Title
Rails Active Support has a possible ReDoS vulnerability in number_to_delimited
Summary
Active Support is a toolkit of support libraries and Ruby core extensions extracted from the Rails framework. `NumberToDelimitedConverter` uses a lookahead-based regular expression with `gsub!` to insert thousands delimiters. Prior to versions 8.1.2.1, 8.0.4.1, and 7.2.3.1, the interaction between the repeated lookahead group and `gsub!` can produce quadratic time complexity on long digit strings. Versions 8.1.2.1, 8.0.4.1, and 7.2.3.1 contain a patch.
SSVC
Exploitation: none Automatable: yes Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-03-24 15:45 UTC
CWE
  • CWE-400 - Uncontrolled Resource Consumption
  • CWE-1333 - Inefficient Regular Expression Complexity
Assigner
GitHub_M CNA under the mitre root
CNA scorecard C 72/100 over 8156 records in the last 180 days details
Impacted products
Vendor Product Version
rails activesupport Affected: >= 8.1.0.beta1, < 8.1.2.1
Affected: >= 8.0.0.beta1, < 8.0.4.1
Affected: < 7.2.3.1
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-33169",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "yes"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-03-24T15:45:49.354964Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-03-24T15:46:43.465Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "product": "activesupport",
          "vendor": "rails",
          "versions": [
            {
              "status": "affected",
              "version": "\u003e= 8.1.0.beta1, \u003c 8.1.2.1"
            },
            {
              "status": "affected",
              "version": "\u003e= 8.0.0.beta1, \u003c 8.0.4.1"
            },
            {
              "status": "affected",
              "version": "\u003c 7.2.3.1"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "Active Support is a toolkit of support libraries and Ruby core extensions extracted from the Rails framework. `NumberToDelimitedConverter` uses a lookahead-based regular expression with `gsub!` to insert thousands delimiters. Prior to versions 8.1.2.1, 8.0.4.1, and 7.2.3.1, the interaction between the repeated lookahead group and `gsub!` can produce quadratic time complexity on long digit strings. Versions 8.1.2.1, 8.0.4.1, and 7.2.3.1 contain a patch."
        }
      ],
      "metrics": [
        {
          "cvssV4_0": {
            "attackComplexity": "LOW",
            "attackRequirements": "NONE",
            "attackVector": "NETWORK",
            "baseScore": 6.9,
            "baseSeverity": "MEDIUM",
            "privilegesRequired": "NONE",
            "subAvailabilityImpact": "NONE",
            "subConfidentialityImpact": "NONE",
            "subIntegrityImpact": "NONE",
            "userInteraction": "NONE",
            "vectorString": "CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:L/SC:N/SI:N/SA:N",
            "version": "4.0",
            "vulnAvailabilityImpact": "LOW",
            "vulnConfidentialityImpact": "NONE",
            "vulnIntegrityImpact": "NONE"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400: Uncontrolled Resource Consumption",
              "lang": "en",
              "type": "CWE"
            }
          ]
        },
        {
          "descriptions": [
            {
              "cweId": "CWE-1333",
              "description": "CWE-1333: Inefficient Regular Expression Complexity",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-03-23T23:19:24.387Z",
        "orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
        "shortName": "GitHub_M"
      },
      "references": [
        {
          "name": "https://github.com/rails/rails/security/advisories/GHSA-cg4j-q9v8-6v38",
          "tags": [
            "x_refsource_CONFIRM"
          ],
          "url": "https://github.com/rails/rails/security/advisories/GHSA-cg4j-q9v8-6v38"
        },
        {
          "name": "https://github.com/rails/rails/commit/29154f1097da13d48fdb3200760b3e3da66dcb11",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/rails/rails/commit/29154f1097da13d48fdb3200760b3e3da66dcb11"
        },
        {
          "name": "https://github.com/rails/rails/commit/b54a4b373c6f042cab6ee2033246b1c9ecc38974",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/rails/rails/commit/b54a4b373c6f042cab6ee2033246b1c9ecc38974"
        },
        {
          "name": "https://github.com/rails/rails/commit/ec1a0e215efd27a3b3911aae6df978a80f456a49",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/rails/rails/commit/ec1a0e215efd27a3b3911aae6df978a80f456a49"
        },
        {
          "name": "https://github.com/rails/rails/releases/tag/v7.2.3.1",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/rails/rails/releases/tag/v7.2.3.1"
        },
        {
          "name": "https://github.com/rails/rails/releases/tag/v8.0.4.1",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/rails/rails/releases/tag/v8.0.4.1"
        },
        {
          "name": "https://github.com/rails/rails/releases/tag/v8.1.2.1",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/rails/rails/releases/tag/v8.1.2.1"
        }
      ],
      "source": {
        "advisory": "GHSA-cg4j-q9v8-6v38",
        "discovery": "UNKNOWN"
      },
      "title": "Rails Active Support has a possible ReDoS vulnerability in number_to_delimited"
    }
  },
  "cveMetadata": {
    "assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
    "assignerShortName": "GitHub_M",
    "cveId": "CVE-2026-33169",
    "datePublished": "2026-03-23T23:07:07.630Z",
    "dateReserved": "2026-03-17T21:17:08.888Z",
    "dateUpdated": "2026-03-24T15:46:43.465Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

CVE-2026-33155 (GCVE-0-2026-33155)

Vulnerability from cvelistv5 – Published: 2026-03-20 20:25 – Updated: 2026-03-24 02:03
VLAI
Title
DeepDiff has Memory Exhaustion DoS through SAFE_TO_IMPORT
Summary
DeepDiff is a project focused on Deep Difference and search of any Python data. From version 5.0.0 to before version 8.6.2, the pickle unpickler _RestrictedUnpickler validates which classes can be loaded but does not limit their constructor arguments. A few of the types in SAFE_TO_IMPORT have constructors that allocate memory proportional to their input (builtins.bytes, builtins.list, builtins.range). A 40-byte pickle payload can force 10+ GB of memory, which crashes applications that load delta objects or call pickle_load with untrusted data. This issue has been patched in version 8.6.2.
SSVC
Exploitation: poc Automatable: yes Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-03-24 02:03 UTC
CWE
  • CWE-400 - Uncontrolled Resource Consumption
Assigner
GitHub_M CNA under the mitre root
CNA scorecard C 72/100 over 8156 records in the last 180 days details
References
Impacted products
Vendor Product Version
seperman deepdiff Affected: >= 5.0.0, < 8.6.2
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-33155",
                "options": [
                  {
                    "Exploitation": "poc"
                  },
                  {
                    "Automatable": "yes"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-03-24T02:03:03.983236Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-03-24T02:03:16.623Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "product": "deepdiff",
          "vendor": "seperman",
          "versions": [
            {
              "status": "affected",
              "version": "\u003e= 5.0.0, \u003c 8.6.2"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "DeepDiff is a project focused on Deep Difference and search of any Python data. From version 5.0.0 to before version 8.6.2, the pickle unpickler _RestrictedUnpickler validates which classes can be loaded but does not limit their constructor arguments. A few of the types in SAFE_TO_IMPORT have constructors that allocate memory proportional to their input (builtins.bytes, builtins.list, builtins.range). A 40-byte pickle payload can force 10+ GB of memory, which crashes applications that load delta objects or call pickle_load with untrusted data. This issue has been patched in version 8.6.2."
        }
      ],
      "metrics": [
        {
          "cvssV4_0": {
            "attackComplexity": "LOW",
            "attackRequirements": "NONE",
            "attackVector": "NETWORK",
            "baseScore": 8.7,
            "baseSeverity": "HIGH",
            "privilegesRequired": "NONE",
            "subAvailabilityImpact": "NONE",
            "subConfidentialityImpact": "NONE",
            "subIntegrityImpact": "NONE",
            "userInteraction": "NONE",
            "vectorString": "CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N",
            "version": "4.0",
            "vulnAvailabilityImpact": "HIGH",
            "vulnConfidentialityImpact": "NONE",
            "vulnIntegrityImpact": "NONE"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400: Uncontrolled Resource Consumption",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-03-20T20:25:53.405Z",
        "orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
        "shortName": "GitHub_M"
      },
      "references": [
        {
          "name": "https://github.com/qlustered/deepdiff/security/advisories/GHSA-54jj-px8x-5w5q",
          "tags": [
            "x_refsource_CONFIRM"
          ],
          "url": "https://github.com/qlustered/deepdiff/security/advisories/GHSA-54jj-px8x-5w5q"
        },
        {
          "name": "https://github.com/qlustered/deepdiff/commit/0d07ec21d12b46ef4e489383b363eadc22d990fb",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/qlustered/deepdiff/commit/0d07ec21d12b46ef4e489383b363eadc22d990fb"
        }
      ],
      "source": {
        "advisory": "GHSA-54jj-px8x-5w5q",
        "discovery": "UNKNOWN"
      },
      "title": "DeepDiff has Memory Exhaustion DoS through SAFE_TO_IMPORT"
    }
  },
  "cveMetadata": {
    "assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
    "assignerShortName": "GitHub_M",
    "cveId": "CVE-2026-33155",
    "datePublished": "2026-03-20T20:25:53.405Z",
    "dateReserved": "2026-03-17T21:17:08.886Z",
    "dateUpdated": "2026-03-24T02:03:16.623Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

CVE-2026-33123 (GCVE-0-2026-33123)

Vulnerability from cvelistv5 – Published: 2026-03-20 09:09 – Updated: 2026-03-20 18:07
VLAI
Title
pypdf has inefficient decoding of array-based streams
Summary
pypdf is a free and open-source pure-python PDF library. Versions prior to 6.9.1 allow an attacker to craft a malicious PDF which leads to long runtimes and/or large memory usage. Exploitation requires accessing an array-based stream with many entries. This issue has been fixed in version 6.9.1.
SSVC
Exploitation: none Automatable: no Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-03-20 16:03 UTC
CWE
  • CWE-400 - Uncontrolled Resource Consumption
  • CWE-407 - Inefficient Algorithmic Complexity
Assigner
GitHub_M CNA under the mitre root
CNA scorecard C 72/100 over 8156 records in the last 180 days details
Impacted products
Vendor Product Version
py-pdf pypdf Affected: < 6.9.1
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-33123",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-03-20T16:03:57.586173Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-03-20T18:07:16.458Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "product": "pypdf",
          "vendor": "py-pdf",
          "versions": [
            {
              "status": "affected",
              "version": "\u003c 6.9.1"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "pypdf is a free and open-source pure-python PDF library. Versions prior to 6.9.1 allow an attacker to craft a malicious PDF which leads to long runtimes and/or large memory usage. Exploitation requires accessing an array-based stream with many entries. This issue has been fixed in version 6.9.1."
        }
      ],
      "metrics": [
        {
          "cvssV4_0": {
            "attackComplexity": "LOW",
            "attackRequirements": "NONE",
            "attackVector": "LOCAL",
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "privilegesRequired": "NONE",
            "subAvailabilityImpact": "NONE",
            "subConfidentialityImpact": "NONE",
            "subIntegrityImpact": "NONE",
            "userInteraction": "NONE",
            "vectorString": "CVSS:4.0/AV:L/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:L/SC:N/SI:N/SA:N",
            "version": "4.0",
            "vulnAvailabilityImpact": "LOW",
            "vulnConfidentialityImpact": "NONE",
            "vulnIntegrityImpact": "NONE"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400: Uncontrolled Resource Consumption",
              "lang": "en",
              "type": "CWE"
            }
          ]
        },
        {
          "descriptions": [
            {
              "cweId": "CWE-407",
              "description": "CWE-407: Inefficient Algorithmic Complexity",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-03-20T09:09:12.831Z",
        "orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
        "shortName": "GitHub_M"
      },
      "references": [
        {
          "name": "https://github.com/py-pdf/pypdf/security/advisories/GHSA-qpxp-75px-xjcp",
          "tags": [
            "x_refsource_CONFIRM"
          ],
          "url": "https://github.com/py-pdf/pypdf/security/advisories/GHSA-qpxp-75px-xjcp"
        },
        {
          "name": "https://github.com/py-pdf/pypdf/pull/3686",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/py-pdf/pypdf/pull/3686"
        },
        {
          "name": "https://github.com/py-pdf/pypdf/releases/tag/6.9.1",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/py-pdf/pypdf/releases/tag/6.9.1"
        }
      ],
      "source": {
        "advisory": "GHSA-qpxp-75px-xjcp",
        "discovery": "UNKNOWN"
      },
      "title": "pypdf has inefficient decoding of array-based streams"
    }
  },
  "cveMetadata": {
    "assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
    "assignerShortName": "GitHub_M",
    "cveId": "CVE-2026-33123",
    "datePublished": "2026-03-20T09:09:12.831Z",
    "dateReserved": "2026-03-17T20:35:49.926Z",
    "dateUpdated": "2026-03-20T18:07:16.458Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

CVE-2026-33116 (GCVE-0-2026-33116)

Vulnerability from cvelistv5 – Published: 2026-04-14 16:57 – Updated: 2026-10-15 15:52
VLAI
Title
.NET, .NET Framework, and Visual Studio Denial of Service Vulnerability
Summary
Loop with unreachable exit condition ('infinite loop') in .NET, .NET Framework, Visual Studio allows an unauthorized attacker to deny service over a network.
SSVC
Exploitation: none Automatable: yes Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-04-14 19:48 UTC
CWE
  • CWE-835 - Loop with Unreachable Exit Condition ('Infinite Loop')
  • CWE-400 - Uncontrolled Resource Consumption
  • CWE-20 - Improper Input Validation
  • CWE-776 - Improper Restriction of Recursive Entity References in DTDs ('XML Entity Expansion')
Assigner
microsoft CNA under the mitre root
CNA scorecard B 82/100 over 4911 records in the last 180 days details
References
URL Tags
https://msrc.microsoft.com/update-guide/vulnerabi… vendor-advisorypatch
https://access.redhat.com/security/cve/CVE-2026-33116 vdb-entryx_refsource_REDHAT
https://bugzilla.redhat.com/show_bug.cgi?id=2457741 issue-trackingx_refsource_REDHAT
https://security.access.redhat.com/data/csaf/v2/v… x_sadp-csaf-vex
https://access.redhat.com/errata/RHSA-2026:13281 vendor-advisoryx_refsource_REDHAT
https://access.redhat.com/errata/RHSA-2026:13280 vendor-advisoryx_refsource_REDHAT
https://access.redhat.com/errata/RHSA-2026:8467 vendor-advisoryx_refsource_REDHAT
https://access.redhat.com/errata/RHSA-2026:8470 vendor-advisoryx_refsource_REDHAT
https://access.redhat.com/errata/RHSA-2026:8472 vendor-advisoryx_refsource_REDHAT
https://access.redhat.com/errata/RHSA-2026:8473 vendor-advisoryx_refsource_REDHAT
https://access.redhat.com/errata/RHSA-2026:8468 vendor-advisoryx_refsource_REDHAT
https://access.redhat.com/errata/RHSA-2026:8475 vendor-advisoryx_refsource_REDHAT
https://access.redhat.com/errata/RHSA-2026:13693 vendor-advisoryx_refsource_REDHAT
https://access.redhat.com/errata/RHSA-2026:13283 vendor-advisoryx_refsource_REDHAT
https://access.redhat.com/errata/RHSA-2026:13282 vendor-advisoryx_refsource_REDHAT
https://access.redhat.com/errata/RHSA-2026:8471 vendor-advisoryx_refsource_REDHAT
https://access.redhat.com/errata/RHSA-2026:8469 vendor-advisoryx_refsource_REDHAT
https://access.redhat.com/errata/RHSA-2026:8474 vendor-advisoryx_refsource_REDHAT
https://access.redhat.com/errata/RHSA-2026:9077 vendor-advisoryx_refsource_REDHAT
https://access.redhat.com/errata/RHSA-2026:9080 vendor-advisoryx_refsource_REDHAT
https://access.redhat.com/errata/RHSA-2026:9205 vendor-advisoryx_refsource_REDHAT
Impacted products
Vendor Product Version
Microsoft .NET 10.0 Affected: 10.0.0 , < 10.0.6 (custom)
Create a notification for this product.
Microsoft .NET 8.0 Affected: 8.0 , < 8.0.26 (custom)
Create a notification for this product.
Microsoft .NET 8.0 Affected: 8.0.0 , < 8.0.26 (custom)
Create a notification for this product.
Microsoft .NET 9.0 Affected: 9.0.0 , < 9.0.15 (custom)
Create a notification for this product.
Microsoft Microsoft .NET Framework 3.5 Affected: 3.5.0 , < 2.0.50727.8982 & 3.0.30729.8976 (custom)
Create a notification for this product.
Microsoft Microsoft .NET Framework 3.5 AND 4.7.2 Affected: 4.7.0 , < 2.0.50727.9068 & 3.0.30729.9065 & 4.7.4141.0 (custom)
Create a notification for this product.
Microsoft Microsoft .NET Framework 3.5 AND 4.8 Affected: 4.8.0 , < 2.0.50727.9068 & 3.0.30729.9065 & 4.8.4801.0 (custom)
Create a notification for this product.
Microsoft Microsoft .NET Framework 3.5 AND 4.8.1 Affected: 4.8.1 , < 2.0.50727.9181 & 3.0.30729.9165 & 4.8.9332.0 (custom)
Create a notification for this product.
Microsoft Microsoft .NET Framework 4.6.2/4.7/4.7.1/4.7.2 Affected: 4.7.0 , < 4.8.4801.0 (custom)
Create a notification for this product.
Microsoft Microsoft .NET Framework 4.8 Affected: 4.8.0 , < 4.8.4801.0 (custom)
Create a notification for this product.
Red Hat Red Hat Enterprise Linux 10 Unaffected: 0:10.0.106-1.el10_1 , < * (rpm)
    cpe:/o:redhat:enterprise_linux:10.1
Create a notification for this product.
Red Hat Red Hat Enterprise Linux 10 Unaffected: 0:8.0.126-1.el10_1 , < * (rpm)
    cpe:/o:redhat:enterprise_linux:10.1
Create a notification for this product.
Red Hat Red Hat Enterprise Linux 10 Unaffected: 0:9.0.116-1.el10_1 , < * (rpm)
    cpe:/o:redhat:enterprise_linux:10.1
Create a notification for this product.
Red Hat Red Hat Enterprise Linux 10.0 Extended Update Support Unaffected: 0:9.0.116-1.el10_0 , < * (rpm)
    cpe:/o:redhat:enterprise_linux_eus:10.0
Create a notification for this product.
Red Hat Red Hat Enterprise Linux 10.0 Extended Update Support Unaffected: 0:8.0.126-1.el10_0 , < * (rpm)
    cpe:/o:redhat:enterprise_linux_eus:10.0
Create a notification for this product.
Red Hat Red Hat Enterprise Linux 8 Unaffected: 0:8.0.126-1.el8_10 , < * (rpm)
    cpe:/a:redhat:enterprise_linux:8
Create a notification for this product.
Red Hat Red Hat Enterprise Linux 8 Unaffected: 0:10.0.106-1.el8_10 , < * (rpm)
    cpe:/a:redhat:enterprise_linux:8
Create a notification for this product.
Red Hat Red Hat Enterprise Linux 8 Unaffected: 0:9.0.116-1.el8_10 , < * (rpm)
    cpe:/a:redhat:enterprise_linux:8
Create a notification for this product.
Red Hat Red Hat Enterprise Linux 9 Unaffected: 0:8.0.126-1.el9_7 , < * (rpm)
    cpe:/a:redhat:enterprise_linux:9
Create a notification for this product.
Red Hat Red Hat Enterprise Linux 9 Unaffected: 0:10.0.106-1.el9_7 , < * (rpm)
    cpe:/a:redhat:enterprise_linux:9
Create a notification for this product.
Red Hat Red Hat Enterprise Linux 9 Unaffected: 0:9.0.116-1.el9_7 , < * (rpm)
    cpe:/a:redhat:enterprise_linux:9
Create a notification for this product.
Red Hat Red Hat Enterprise Linux 9.4 Extended Update Support Unaffected: 0:8.0.126-1.el9_4 , < * (rpm)
    cpe:/a:redhat:rhel_eus:9.4
Create a notification for this product.
Red Hat Red Hat Enterprise Linux 9.6 Extended Update Support Unaffected: 0:9.0.116-1.el9_6 , < * (rpm)
    cpe:/a:redhat:rhel_eus:9.6
Create a notification for this product.
Red Hat Red Hat Enterprise Linux 9.6 Extended Update Support Unaffected: 0:8.0.126-1.el9_6 , < * (rpm)
    cpe:/a:redhat:rhel_eus:9.6
Create a notification for this product.
Red Hat Red Hat Hardened Images Unaffected: 10.0.106-1.hum1 , < * (rpm)
    cpe:/a:redhat:hummingbird:1
Create a notification for this product.
Red Hat Red Hat Hardened Images Unaffected: 8.0.126-1.hum1 , < * (rpm)
    cpe:/a:redhat:hummingbird:1
Create a notification for this product.
Red Hat Red Hat Hardened Images Unaffected: 9.0.116-1.hum1 , < * (rpm)
    cpe:/a:redhat:hummingbird:1
Create a notification for this product.
Date Public
2026-04-14 14:00
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-33116",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "yes"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-04-14T19:48:26.946135Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-04-14T19:48:35.606Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      },
      {
        "affected": [
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/o:redhat:enterprise_linux:10.1"
            ],
            "defaultStatus": "affected",
            "packageName": "dotnet10.0",
            "product": "Red Hat Enterprise Linux 10",
            "vendor": "Red Hat",
            "versions": [
              {
                "lessThan": "*",
                "status": "unaffected",
                "version": "0:10.0.106-1.el10_1",
                "versionType": "rpm"
              }
            ]
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/o:redhat:enterprise_linux:10.1"
            ],
            "defaultStatus": "affected",
            "packageName": "dotnet8.0",
            "product": "Red Hat Enterprise Linux 10",
            "vendor": "Red Hat",
            "versions": [
              {
                "lessThan": "*",
                "status": "unaffected",
                "version": "0:8.0.126-1.el10_1",
                "versionType": "rpm"
              }
            ]
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/o:redhat:enterprise_linux:10.1"
            ],
            "defaultStatus": "affected",
            "packageName": "dotnet9.0",
            "product": "Red Hat Enterprise Linux 10",
            "vendor": "Red Hat",
            "versions": [
              {
                "lessThan": "*",
                "status": "unaffected",
                "version": "0:9.0.116-1.el10_1",
                "versionType": "rpm"
              }
            ]
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/o:redhat:enterprise_linux_eus:10.0"
            ],
            "defaultStatus": "affected",
            "packageName": "dotnet9.0",
            "product": "Red Hat Enterprise Linux 10.0 Extended Update Support",
            "vendor": "Red Hat",
            "versions": [
              {
                "lessThan": "*",
                "status": "unaffected",
                "version": "0:9.0.116-1.el10_0",
                "versionType": "rpm"
              }
            ]
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/o:redhat:enterprise_linux_eus:10.0"
            ],
            "defaultStatus": "affected",
            "packageName": "dotnet8.0",
            "product": "Red Hat Enterprise Linux 10.0 Extended Update Support",
            "vendor": "Red Hat",
            "versions": [
              {
                "lessThan": "*",
                "status": "unaffected",
                "version": "0:8.0.126-1.el10_0",
                "versionType": "rpm"
              }
            ]
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/a:redhat:enterprise_linux:8"
            ],
            "defaultStatus": "affected",
            "packageName": "dotnet8.0",
            "product": "Red Hat Enterprise Linux 8",
            "vendor": "Red Hat",
            "versions": [
              {
                "lessThan": "*",
                "status": "unaffected",
                "version": "0:8.0.126-1.el8_10",
                "versionType": "rpm"
              }
            ]
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/a:redhat:enterprise_linux:8"
            ],
            "defaultStatus": "affected",
            "packageName": "dotnet10.0",
            "product": "Red Hat Enterprise Linux 8",
            "vendor": "Red Hat",
            "versions": [
              {
                "lessThan": "*",
                "status": "unaffected",
                "version": "0:10.0.106-1.el8_10",
                "versionType": "rpm"
              }
            ]
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/a:redhat:enterprise_linux:8"
            ],
            "defaultStatus": "affected",
            "packageName": "dotnet9.0",
            "product": "Red Hat Enterprise Linux 8",
            "vendor": "Red Hat",
            "versions": [
              {
                "lessThan": "*",
                "status": "unaffected",
                "version": "0:9.0.116-1.el8_10",
                "versionType": "rpm"
              }
            ]
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/a:redhat:enterprise_linux:9"
            ],
            "defaultStatus": "affected",
            "packageName": "dotnet8.0",
            "product": "Red Hat Enterprise Linux 9",
            "vendor": "Red Hat",
            "versions": [
              {
                "lessThan": "*",
                "status": "unaffected",
                "version": "0:8.0.126-1.el9_7",
                "versionType": "rpm"
              }
            ]
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/a:redhat:enterprise_linux:9"
            ],
            "defaultStatus": "affected",
            "packageName": "dotnet10.0",
            "product": "Red Hat Enterprise Linux 9",
            "vendor": "Red Hat",
            "versions": [
              {
                "lessThan": "*",
                "status": "unaffected",
                "version": "0:10.0.106-1.el9_7",
                "versionType": "rpm"
              }
            ]
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/a:redhat:enterprise_linux:9"
            ],
            "defaultStatus": "affected",
            "packageName": "dotnet9.0",
            "product": "Red Hat Enterprise Linux 9",
            "vendor": "Red Hat",
            "versions": [
              {
                "lessThan": "*",
                "status": "unaffected",
                "version": "0:9.0.116-1.el9_7",
                "versionType": "rpm"
              }
            ]
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/a:redhat:rhel_eus:9.4"
            ],
            "defaultStatus": "affected",
            "packageName": "dotnet8.0",
            "product": "Red Hat Enterprise Linux 9.4 Extended Update Support",
            "vendor": "Red Hat",
            "versions": [
              {
                "lessThan": "*",
                "status": "unaffected",
                "version": "0:8.0.126-1.el9_4",
                "versionType": "rpm"
              }
            ]
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/a:redhat:rhel_eus:9.6"
            ],
            "defaultStatus": "affected",
            "packageName": "dotnet9.0",
            "product": "Red Hat Enterprise Linux 9.6 Extended Update Support",
            "vendor": "Red Hat",
            "versions": [
              {
                "lessThan": "*",
                "status": "unaffected",
                "version": "0:9.0.116-1.el9_6",
                "versionType": "rpm"
              }
            ]
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/a:redhat:rhel_eus:9.6"
            ],
            "defaultStatus": "affected",
            "packageName": "dotnet8.0",
            "product": "Red Hat Enterprise Linux 9.6 Extended Update Support",
            "vendor": "Red Hat",
            "versions": [
              {
                "lessThan": "*",
                "status": "unaffected",
                "version": "0:8.0.126-1.el9_6",
                "versionType": "rpm"
              }
            ]
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/a:redhat:hummingbird:1"
            ],
            "defaultStatus": "affected",
            "packageName": "dotnet10-0-main",
            "product": "Red Hat Hardened Images",
            "vendor": "Red Hat",
            "versions": [
              {
                "lessThan": "*",
                "status": "unaffected",
                "version": "10.0.106-1.hum1",
                "versionType": "rpm"
              }
            ]
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/a:redhat:hummingbird:1"
            ],
            "defaultStatus": "affected",
            "packageName": "dotnet8-0-main",
            "product": "Red Hat Hardened Images",
            "vendor": "Red Hat",
            "versions": [
              {
                "lessThan": "*",
                "status": "unaffected",
                "version": "8.0.126-1.hum1",
                "versionType": "rpm"
              }
            ]
          },
          {
            "collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
            "cpes": [
              "cpe:/a:redhat:hummingbird:1"
            ],
            "defaultStatus": "affected",
            "packageName": "dotnet9-0-main",
            "product": "Red Hat Hardened Images",
            "vendor": "Red Hat",
            "versions": [
              {
                "lessThan": "*",
                "status": "unaffected",
                "version": "9.0.116-1.hum1",
                "versionType": "rpm"
              }
            ]
          }
        ],
        "datePublic": "2026-04-14T18:38:58.320Z",
        "descriptions": [
          {
            "lang": "en",
            "value": "A flaw was found in .NET. A remote attacker could exploit this vulnerability by crafting a malicious XML document that triggers an infinite recursion within the XmlDecryptionTransform component. This could lead to a Denial of Service (DoS), making the affected system unresponsive."
          }
        ],
        "metrics": [
          {
            "other": {
              "content": {
                "namespace": "https://access.redhat.com/security/updates/classification/",
                "value": "Important"
              },
              "type": "Red Hat severity rating"
            }
          },
          {
            "cvssV3_1": {
              "attackComplexity": "LOW",
              "attackVector": "NETWORK",
              "availabilityImpact": "HIGH",
              "baseScore": 7.5,
              "baseSeverity": "HIGH",
              "confidentialityImpact": "NONE",
              "integrityImpact": "NONE",
              "privilegesRequired": "NONE",
              "scope": "UNCHANGED",
              "userInteraction": "NONE",
              "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
              "version": "3.1"
            },
            "format": "CVSS"
          }
        ],
        "problemTypes": [
          {
            "descriptions": [
              {
                "cweId": "CWE-776",
                "description": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)",
                "lang": "en",
                "type": "CWE"
              }
            ]
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-07-15T01:07:17.575Z",
          "orgId": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
          "shortName": "redhat-SADP"
        },
        "references": [
          {
            "tags": [
              "vdb-entry",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/security/cve/CVE-2026-33116"
          },
          {
            "name": "RHBZ#2457741",
            "tags": [
              "issue-tracking",
              "x_refsource_REDHAT"
            ],
            "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2457741"
          },
          {
            "tags": [
              "x_sadp-csaf-vex"
            ],
            "url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-33116.json"
          },
          {
            "tags": [
              "vendor-advisory",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/errata/RHSA-2026:13281"
          },
          {
            "tags": [
              "vendor-advisory",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/errata/RHSA-2026:13280"
          },
          {
            "tags": [
              "vendor-advisory",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/errata/RHSA-2026:8467"
          },
          {
            "tags": [
              "vendor-advisory",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/errata/RHSA-2026:8470"
          },
          {
            "tags": [
              "vendor-advisory",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/errata/RHSA-2026:8472"
          },
          {
            "tags": [
              "vendor-advisory",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/errata/RHSA-2026:8473"
          },
          {
            "tags": [
              "vendor-advisory",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/errata/RHSA-2026:8468"
          },
          {
            "tags": [
              "vendor-advisory",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/errata/RHSA-2026:8475"
          },
          {
            "tags": [
              "vendor-advisory",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/errata/RHSA-2026:13693"
          },
          {
            "tags": [
              "vendor-advisory",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/errata/RHSA-2026:13283"
          },
          {
            "tags": [
              "vendor-advisory",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/errata/RHSA-2026:13282"
          },
          {
            "tags": [
              "vendor-advisory",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/errata/RHSA-2026:8471"
          },
          {
            "tags": [
              "vendor-advisory",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/errata/RHSA-2026:8469"
          },
          {
            "tags": [
              "vendor-advisory",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/errata/RHSA-2026:8474"
          },
          {
            "tags": [
              "vendor-advisory",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/errata/RHSA-2026:9077"
          },
          {
            "tags": [
              "vendor-advisory",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/errata/RHSA-2026:9080"
          },
          {
            "tags": [
              "vendor-advisory",
              "x_refsource_REDHAT"
            ],
            "url": "https://access.redhat.com/errata/RHSA-2026:9205"
          }
        ],
        "solutions": [
          {
            "lang": "en",
            "value": "RHSA-2026:13281: Red Hat Enterprise Linux AppStream EUS (v. 10.0), Red Hat Enterprise Linux CodeReady Linux Builder EUS (v. 10.0)"
          },
          {
            "lang": "en",
            "value": "RHSA-2026:13280: Red Hat Enterprise Linux AppStream EUS (v. 10.0), Red Hat Enterprise Linux CodeReady Linux Builder EUS (v. 10.0)"
          },
          {
            "lang": "en",
            "value": "RHSA-2026:8467: Red Hat Enterprise Linux AppStream (v. 10), Red Hat Enterprise Linux CodeReady Linux Builder (v. 10)"
          },
          {
            "lang": "en",
            "value": "RHSA-2026:8470: Red Hat Enterprise Linux AppStream (v. 10), Red Hat Enterprise Linux CodeReady Linux Builder (v. 10)"
          },
          {
            "lang": "en",
            "value": "RHSA-2026:8472: Red Hat Enterprise Linux AppStream (v. 10), Red Hat Enterprise Linux CodeReady Linux Builder (v. 10)"
          },
          {
            "lang": "en",
            "value": "RHSA-2026:8473: Red Hat Enterprise Linux AppStream (v. 8), Red Hat Enterprise Linux CRB (v. 8)"
          },
          {
            "lang": "en",
            "value": "RHSA-2026:8468: Red Hat Enterprise Linux AppStream (v. 8), Red Hat Enterprise Linux CRB (v. 8)"
          },
          {
            "lang": "en",
            "value": "RHSA-2026:8475: Red Hat Enterprise Linux AppStream (v. 8), Red Hat Enterprise Linux CRB (v. 8)"
          },
          {
            "lang": "en",
            "value": "RHSA-2026:13693: Red Hat CodeReady Linux Builder EUS (v.9.4), Red Hat Enterprise Linux AppStream EUS (v.9.4)"
          },
          {
            "lang": "en",
            "value": "RHSA-2026:13283: Red Hat CodeReady Linux Builder EUS (v.9.6), Red Hat Enterprise Linux AppStream EUS (v.9.6)"
          },
          {
            "lang": "en",
            "value": "RHSA-2026:13282: Red Hat CodeReady Linux Builder EUS (v.9.6), Red Hat Enterprise Linux AppStream EUS (v.9.6)"
          },
          {
            "lang": "en",
            "value": "RHSA-2026:8471: Red Hat Enterprise Linux AppStream (v. 9), Red Hat Enterprise Linux CodeReady Linux Builder (v. 9)"
          },
          {
            "lang": "en",
            "value": "RHSA-2026:8469: Red Hat Enterprise Linux AppStream (v. 9), Red Hat Enterprise Linux CodeReady Linux Builder (v. 9)"
          },
          {
            "lang": "en",
            "value": "RHSA-2026:8474: Red Hat Enterprise Linux AppStream (v. 9), Red Hat Enterprise Linux CodeReady Linux Builder (v. 9)"
          },
          {
            "lang": "en",
            "value": "RHSA-2026:9077: Red Hat Hardened Images"
          },
          {
            "lang": "en",
            "value": "RHSA-2026:9080: Red Hat Hardened Images"
          },
          {
            "lang": "en",
            "value": "RHSA-2026:9205: Red Hat Hardened Images"
          }
        ],
        "timeline": [
          {
            "lang": "en",
            "time": "2026-04-13T05:12:13.834Z",
            "value": "Reported to Red Hat."
          },
          {
            "lang": "en",
            "time": "2026-04-14T18:38:58.320Z",
            "value": "Made public."
          }
        ],
        "title": "dotnet: .NET: Denial of Service via Infinite Recursion in XmlDecryptionTransform",
        "workarounds": [
          {
            "lang": "en",
            "value": "Mitigation for this issue is either not available or the currently available options do not meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base, or stability."
          }
        ],
        "x_adpType": "supplier",
        "x_generator": {
          "engine": "sadp-cli 1.0.0"
        }
      }
    ],
    "cna": {
      "affected": [
        {
          "product": ".NET 10.0",
          "vendor": "Microsoft",
          "versions": [
            {
              "lessThan": "10.0.6",
              "status": "affected",
              "version": "10.0.0",
              "versionType": "custom"
            }
          ]
        },
        {
          "product": ".NET 8.0",
          "vendor": "Microsoft",
          "versions": [
            {
              "lessThan": "8.0.26",
              "status": "affected",
              "version": "8.0",
              "versionType": "custom"
            }
          ]
        },
        {
          "product": ".NET 8.0",
          "vendor": "Microsoft",
          "versions": [
            {
              "lessThan": "8.0.26",
              "status": "affected",
              "version": "8.0.0",
              "versionType": "custom"
            }
          ]
        },
        {
          "product": ".NET 9.0",
          "vendor": "Microsoft",
          "versions": [
            {
              "lessThan": "9.0.15",
              "status": "affected",
              "version": "9.0.0",
              "versionType": "custom"
            }
          ]
        },
        {
          "platforms": [
            "Windows Server 2012",
            "Windows Server 2012 (Server Core installation)",
            "Windows Server 2012 R2",
            "Windows Server 2012 R2 (Server Core installation)"
          ],
          "product": "Microsoft .NET Framework 3.5",
          "vendor": "Microsoft",
          "versions": [
            {
              "lessThan": "2.0.50727.8982 \u0026 3.0.30729.8976",
              "status": "affected",
              "version": "3.5.0",
              "versionType": "custom"
            }
          ]
        },
        {
          "platforms": [
            "Windows 10 Version 1809 for 32-bit Systems",
            "Windows 10 Version 1809 for ARM64-based Systems",
            "Windows 10 Version 1809 for x64-based Systems"
          ],
          "product": "Microsoft .NET Framework 3.5 AND 4.7.2",
          "vendor": "Microsoft",
          "versions": [
            {
              "lessThan": "2.0.50727.9068 \u0026 3.0.30729.9065 \u0026 4.7.4141.0",
              "status": "affected",
              "version": "4.7.0",
              "versionType": "custom"
            }
          ]
        },
        {
          "platforms": [
            "Windows 10 Version 1809 for 32-bit Systems",
            "Windows 10 Version 1809 for ARM64-based Systems",
            "Windows 10 Version 1809 for x64-based Systems",
            "Windows 10 Version 21H2 for 32-bit Systems",
            "Windows 10 Version 21H2 for ARM64-based Systems",
            "Windows 10 Version 21H2 for x64-based Systems",
            "Windows 10 Version 22H2 for 32-bit Systems",
            "Windows 10 Version 22H2 for ARM64-based Systems",
            "Windows 10 Version 22H2 for x64-based Systems",
            "Windows Server 2022",
            "Windows Server 2022 (Server Core installation)"
          ],
          "product": "Microsoft .NET Framework 3.5 AND 4.8",
          "vendor": "Microsoft",
          "versions": [
            {
              "lessThan": "2.0.50727.9068 \u0026 3.0.30729.9065 \u0026 4.8.4801.0",
              "status": "affected",
              "version": "4.8.0",
              "versionType": "custom"
            }
          ]
        },
        {
          "platforms": [
            "Windows 10 Version 21H2 for 32-bit Systems",
            "Windows 10 Version 21H2 for ARM64-based Systems",
            "Windows 10 Version 21H2 for x64-based Systems",
            "Windows 10 Version 22H2 for 32-bit Systems",
            "Windows 10 Version 22H2 for ARM64-based Systems",
            "Windows 10 Version 22H2 for x64-based Systems",
            "Windows 11 Version 22H2 for ARM64-based Systems",
            "Windows 11 Version 22H2 for x64-based Systems",
            "Windows 11 Version 23H2 for ARM64-based Systems",
            "Windows 11 Version 23H2 for x64-based Systems",
            "Windows 11 Version 24H2 for ARM64-based Systems",
            "Windows 11 Version 24H2 for x64-based Systems",
            "Windows 11 Version 25H2 for ARM64-based Systems",
            "Windows 11 Version 25H2 for x64-based Systems",
            "Windows 11 Version 26H1 for ARM64-based Systems",
            "Windows 11 version 26H1 for x64-based Systems",
            "Windows Server 2022",
            "Windows Server 2022 (Server Core installation)",
            "Windows Server 2022, 23H2 Edition (Server Core installation)",
            "Windows Server 2025",
            "Windows Server 2025 (Server Core installation)"
          ],
          "product": "Microsoft .NET Framework 3.5 AND 4.8.1",
          "vendor": "Microsoft",
          "versions": [
            {
              "lessThan": "2.0.50727.9181 \u0026 3.0.30729.9165 \u0026 4.8.9332.0",
              "status": "affected",
              "version": "4.8.1",
              "versionType": "custom"
            }
          ]
        },
        {
          "platforms": [
            "Windows Server 2012",
            "Windows Server 2012 (Server Core installation)",
            "Windows Server 2012 R2",
            "Windows Server 2012 R2 (Server Core installation)"
          ],
          "product": "Microsoft .NET Framework 4.6.2/4.7/4.7.1/4.7.2",
          "vendor": "Microsoft",
          "versions": [
            {
              "lessThan": "4.8.4801.0",
              "status": "affected",
              "version": "4.7.0",
              "versionType": "custom"
            }
          ]
        },
        {
          "platforms": [
            "Windows 10 Version 1607 for 32-bit Systems",
            "Windows 10 Version 1607 for x64-based Systems",
            "Windows Server 2012",
            "Windows Server 2012 (Server Core installation)",
            "Windows Server 2012 R2",
            "Windows Server 2012 R2 (Server Core installation)"
          ],
          "product": "Microsoft .NET Framework 4.8",
          "vendor": "Microsoft",
          "versions": [
            {
              "lessThan": "4.8.4801.0",
              "status": "affected",
              "version": "4.8.0",
              "versionType": "custom"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:a:microsoft:.net:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "10.0.6",
                  "versionStartIncluding": "10.0.0",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:a:microsoft:.net:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "8.0.26",
                  "versionStartIncluding": "8.0",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:a:microsoft:.net:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "8.0.26",
                  "versionStartIncluding": "8.0.0",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:a:microsoft:.net:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "9.0.15",
                  "versionStartIncluding": "9.0.0",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:a:microsoft:.net:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "4.8.4801.0",
                  "versionStartIncluding": "4.8.0",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:a:microsoft:.net:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "2.0.50727.9068 \u0026 3.0.30729.9065 \u0026 4.8.4801.0",
                  "versionStartIncluding": "4.8.0",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:a:microsoft:.net:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "2.0.50727.9068 \u0026 3.0.30729.9065 \u0026 4.7.4141.0",
                  "versionStartIncluding": "4.7.0",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:a:microsoft:.net:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "4.8.4801.0",
                  "versionStartIncluding": "4.7.0",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:a:microsoft:.net:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "2.0.50727.9181 \u0026 3.0.30729.9165 \u0026 4.8.9332.0",
                  "versionStartIncluding": "4.8.1",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:a:microsoft:.net:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "2.0.50727.8982 \u0026 3.0.30729.8976",
                  "versionStartIncluding": "3.5.0",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "datePublic": "2026-04-14T14:00:00.000Z",
      "descriptions": [
        {
          "lang": "en-US",
          "value": "Loop with unreachable exit condition (\u0027infinite loop\u0027) in .NET, .NET Framework, Visual Studio allows an unauthorized attacker to deny service over a network."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "format": "CVSS",
          "scenarios": [
            {
              "lang": "en-US",
              "value": "GENERAL"
            }
          ]
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-835",
              "description": "CWE-835: Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)",
              "lang": "en-US",
              "type": "CWE"
            },
            {
              "cweId": "CWE-400",
              "description": "CWE-400: Uncontrolled Resource Consumption",
              "lang": "en-US",
              "type": "CWE"
            },
            {
              "cweId": "CWE-20",
              "description": "CWE-20: Improper Input Validation",
              "lang": "en-US",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-10-15T15:52:59.382Z",
        "orgId": "f38d906d-7342-40ea-92c1-6c4a2c6478c8",
        "shortName": "microsoft"
      },
      "references": [
        {
          "name": ".NET, .NET Framework, and Visual Studio Denial of Service Vulnerability",
          "tags": [
            "vendor-advisory",
            "patch"
          ],
          "url": "https://msrc.microsoft.com/update-guide/vulnerability/CVE-2026-33116"
        }
      ],
      "title": ".NET, .NET Framework, and Visual Studio Denial of Service Vulnerability"
    }
  },
  "cveMetadata": {
    "assignerOrgId": "f38d906d-7342-40ea-92c1-6c4a2c6478c8",
    "assignerShortName": "microsoft",
    "cveId": "CVE-2026-33116",
    "datePublished": "2026-04-14T16:57:47.626Z",
    "dateReserved": "2026-03-17T20:15:23.721Z",
    "dateUpdated": "2026-10-15T15:52:59.382Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

CVE-2026-32936 (GCVE-0-2026-32936)

Vulnerability from cvelistv5 – Published: 2026-05-05 19:07 – Updated: 2026-05-05 19:32
VLAI
Title
CoreDNS DoH GET path missing size validation causes CPU and memory amplification
Summary
CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the DNS-over-HTTPS (DoH) GET path accepts oversized dns= query parameter values and performs URL query parsing, base64 decoding, and DNS message unpacking before rejecting the request. Unlike the POST path, which applies a bounded read via http.MaxBytesReader limited to 65536 bytes, the GET path has no equivalent size validation before expensive processing. A remote, unauthenticated attacker can repeatedly send oversized DoH GET requests to force high CPU usage, large transient memory allocations, and elevated garbage-collection pressure, leading to denial of service. This issue has been fixed in version 1.14.3.
SSVC
Exploitation: poc Automatable: yes Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-05-05 19:32 UTC
CWE
  • CWE-400 - Uncontrolled Resource Consumption
Assigner
GitHub_M CNA under the mitre root
CNA scorecard C 72/100 over 8156 records in the last 180 days details
References
Impacted products
Vendor Product Version
coredns coredns Affected: < 1.14.3
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-32936",
                "options": [
                  {
                    "Exploitation": "poc"
                  },
                  {
                    "Automatable": "yes"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-05-05T19:32:21.653054Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-05-05T19:32:25.341Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "references": [
          {
            "tags": [
              "exploit"
            ],
            "url": "https://github.com/coredns/coredns/security/advisories/GHSA-63cw-r7xf-jmwr"
          }
        ],
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "product": "coredns",
          "vendor": "coredns",
          "versions": [
            {
              "status": "affected",
              "version": "\u003c 1.14.3"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the DNS-over-HTTPS (DoH) GET path accepts oversized dns= query parameter values and performs URL query parsing, base64 decoding, and DNS message unpacking before rejecting the request. Unlike the POST path, which applies a bounded read via http.MaxBytesReader limited to 65536 bytes, the GET path has no equivalent size validation before expensive processing. A remote, unauthenticated attacker can repeatedly send oversized DoH GET requests to force high CPU usage, large transient memory allocations, and elevated garbage-collection pressure, leading to denial of service. This issue has been fixed in version 1.14.3."
        }
      ],
      "metrics": [
        {
          "cvssV4_0": {
            "attackComplexity": "LOW",
            "attackRequirements": "NONE",
            "attackVector": "NETWORK",
            "baseScore": 8.7,
            "baseSeverity": "HIGH",
            "privilegesRequired": "NONE",
            "subAvailabilityImpact": "NONE",
            "subConfidentialityImpact": "NONE",
            "subIntegrityImpact": "NONE",
            "userInteraction": "NONE",
            "vectorString": "CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N",
            "version": "4.0",
            "vulnAvailabilityImpact": "HIGH",
            "vulnConfidentialityImpact": "NONE",
            "vulnIntegrityImpact": "NONE"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400: Uncontrolled Resource Consumption",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-05-05T19:07:51.926Z",
        "orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
        "shortName": "GitHub_M"
      },
      "references": [
        {
          "name": "https://github.com/coredns/coredns/security/advisories/GHSA-63cw-r7xf-jmwr",
          "tags": [
            "x_refsource_CONFIRM"
          ],
          "url": "https://github.com/coredns/coredns/security/advisories/GHSA-63cw-r7xf-jmwr"
        },
        {
          "name": "https://github.com/coredns/coredns/releases/tag/v1.14.3",
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://github.com/coredns/coredns/releases/tag/v1.14.3"
        }
      ],
      "source": {
        "advisory": "GHSA-63cw-r7xf-jmwr",
        "discovery": "UNKNOWN"
      },
      "title": "CoreDNS DoH GET path missing size validation causes CPU and memory amplification"
    }
  },
  "cveMetadata": {
    "assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
    "assignerShortName": "GitHub_M",
    "cveId": "CVE-2026-32936",
    "datePublished": "2026-05-05T19:07:51.926Z",
    "dateReserved": "2026-03-17T00:05:53.282Z",
    "dateUpdated": "2026-05-05T19:32:25.341Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

CVE-2026-32686 (GCVE-0-2026-32686)

Vulnerability from cvelistv5 – Published: 2026-05-07 14:04 – Updated: 2026-11-19 08:33
VLAI
Title
Unbounded exponent in decimal enables unauthenticated DoS
Summary
Uncontrolled Resource Consumption vulnerability in ericmj decimal allows unauthenticated remote Denial of Service. The decimal library does not bound the exponent on parsed input. Storing a decimal with a very large exponent (e.g. Decimal.new("1e1000000000")) is accepted without error. Subsequent calls to arithmetic functions (Decimal.add/2, Decimal.sub/2, Decimal.div/2M), Decimal.to_string/2M with :normalM or :xsdM format, Decimal.to_integer/1M, Decimal.round/3M, or Decimal.compare/3M with a threshold allocate memory proportional to the exponent value, which can exhaust available memory and crash the BEAM VM. Any application that accepts user-supplied decimal input and subsequently performs arithmetic, rounding, conversion to integer, or string formatting on it is exposed. A single malicious request is sufficient to cause an out-of-memory crash. This issue affects decimal: from 0.1.0 before 3.0.0.
SSVC
Exploitation: poc Automatable: yes Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-05-08 22:42 UTC
CWE
  • CWE-400 - Uncontrolled Resource Consumption
Assigner
EEF CNA under the mitre root
CNA scorecard A 97/100 over 360 records in the last 180 days details
Impacted products
Vendor Product Version
ericmj decimal Affected: 0.1.0 , < 3.0.0 (semver)
    cpe:2.3:a:ericmj:decimal:*:*:*:*:*:*:*:*
Create a notification for this product.
ericmj decimal Affected: bc11f4a2b6fb61fc1360a0ab4e79141bba918841 , < 6a523f3a73b8c9974540e21c7aa88f1258bb35ae (git)
    cpe:2.3:a:ericmj:decimal:*:*:*:*:*:*:*:*
Create a notification for this product.
Date Public
2026-09-08 13:08
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-32686",
                "options": [
                  {
                    "Exploitation": "poc"
                  },
                  {
                    "Automatable": "yes"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-05-08T22:42:13.343081Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-05-08T22:43:03.396Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "references": [
          {
            "tags": [
              "exploit"
            ],
            "url": "https://github.com/ericmj/decimal/security/advisories/GHSA-rhv4-8758-jx7v"
          }
        ],
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "collectionURL": "https://repo.hex.pm",
          "cpes": [
            "cpe:2.3:a:ericmj:decimal:*:*:*:*:*:*:*:*"
          ],
          "defaultStatus": "unaffected",
          "modules": [
            "\u0027Elixir.Decimal\u0027"
          ],
          "packageName": "decimal",
          "packageURL": "pkg:hex/decimal",
          "product": "decimal",
          "programFiles": [
            "lib/decimal.ex"
          ],
          "programRoutines": [
            {
              "name": "\u0027Elixir.Decimal\u0027:new/1"
            },
            {
              "name": "\u0027Elixir.Decimal\u0027:parse/1"
            },
            {
              "name": "\u0027Elixir.Decimal\u0027:cast/1"
            },
            {
              "name": "\u0027Elixir.Decimal\u0027:add/2"
            },
            {
              "name": "\u0027Elixir.Decimal\u0027:sub/2"
            },
            {
              "name": "\u0027Elixir.Decimal\u0027:div/2"
            },
            {
              "name": "\u0027Elixir.Decimal\u0027:to_string/2"
            },
            {
              "name": "\u0027Elixir.Decimal\u0027:to_integer/1"
            },
            {
              "name": "\u0027Elixir.Decimal\u0027:round/3"
            },
            {
              "name": "\u0027Elixir.Decimal\u0027:compare/3"
            }
          ],
          "repo": "https://github.com/ericmj/decimal",
          "vendor": "ericmj",
          "versions": [
            {
              "lessThan": "3.0.0",
              "status": "affected",
              "version": "0.1.0",
              "versionType": "semver"
            }
          ]
        },
        {
          "collectionURL": "https://github.com",
          "cpes": [
            "cpe:2.3:a:ericmj:decimal:*:*:*:*:*:*:*:*"
          ],
          "defaultStatus": "unaffected",
          "modules": [
            "\u0027Elixir.Decimal\u0027"
          ],
          "packageName": "ericmj/decimal",
          "packageURL": "pkg:github/ericmj/decimal",
          "product": "decimal",
          "programFiles": [
            "lib/decimal.ex"
          ],
          "programRoutines": [
            {
              "name": "\u0027Elixir.Decimal\u0027:new/1"
            },
            {
              "name": "\u0027Elixir.Decimal\u0027:parse/1"
            },
            {
              "name": "\u0027Elixir.Decimal\u0027:cast/1"
            },
            {
              "name": "\u0027Elixir.Decimal\u0027:add/2"
            },
            {
              "name": "\u0027Elixir.Decimal\u0027:sub/2"
            },
            {
              "name": "\u0027Elixir.Decimal\u0027:div/2"
            },
            {
              "name": "\u0027Elixir.Decimal\u0027:to_string/2"
            },
            {
              "name": "\u0027Elixir.Decimal\u0027:to_integer/1"
            },
            {
              "name": "\u0027Elixir.Decimal\u0027:round/3"
            },
            {
              "name": "\u0027Elixir.Decimal\u0027:compare/3"
            }
          ],
          "repo": "https://github.com/ericmj/decimal",
          "vendor": "ericmj",
          "versions": [
            {
              "lessThan": "6a523f3a73b8c9974540e21c7aa88f1258bb35ae",
              "status": "affected",
              "version": "bc11f4a2b6fb61fc1360a0ab4e79141bba918841",
              "versionType": "git"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:a:ericmj:decimal:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "3.0.0",
                  "versionStartIncluding": "0.1.0",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ],
          "operator": "AND"
        }
      ],
      "credits": [
        {
          "lang": "en",
          "type": "finder",
          "value": "Peter Ullrich"
        },
        {
          "lang": "en",
          "type": "analyst",
          "value": "Jonatan M\u00e4nnchen / EEF"
        },
        {
          "lang": "en",
          "type": "remediation developer",
          "value": "Eric Meadows-J\u00f6nsson / Hex.pm"
        },
        {
          "lang": "en",
          "type": "remediation reviewer",
          "value": "Jos\u00e9 Valim"
        },
        {
          "lang": "en",
          "type": "remediation reviewer",
          "value": "Matthew Johnston"
        },
        {
          "lang": "en",
          "type": "remediation reviewer",
          "value": "ruslandoga"
        },
        {
          "lang": "en",
          "type": "remediation reviewer",
          "value": "Wojtek Mach"
        }
      ],
      "datePublic": "2026-09-08T13:08:41.000Z",
      "descriptions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003cp\u003eUncontrolled Resource Consumption vulnerability in ericmj decimal allows unauthenticated remote Denial of Service.\u003c/p\u003e\n\u003cp\u003eThe \u003ccode\u003edecimal\u003c/code\u003e library does not bound the exponent on parsed input. Storing a decimal with a very large exponent (e.g. \u003ccode\u003eDecimal.new(\"1e1000000000\")\u003c/code\u003e) is accepted without error. Subsequent calls to arithmetic functions (\u003ccode\u003eDecimal.add/2\u003c/code\u003e, \u003ccode\u003eDecimal.sub/2\u003c/code\u003e, \u003ccode\u003eDecimal.div/2\u003c/code\u003eM), \u003ccode\u003eDecimal.to_string/2\u003c/code\u003eM with \u003ccode\u003e:normal\u003c/code\u003eM or \u003ccode\u003e:xsd\u003c/code\u003eM format, \u003ccode\u003eDecimal.to_integer/1\u003c/code\u003eM, \u003ccode\u003eDecimal.round/3\u003c/code\u003eM, or \u003ccode\u003eDecimal.compare/3\u003c/code\u003eM with a threshold allocate memory proportional to the exponent value, which can exhaust available memory and crash the BEAM VM.\u003c/p\u003e\n\u003cp\u003eAny application that accepts user-supplied decimal input and subsequently performs arithmetic, rounding, conversion to integer, or string formatting on it is exposed. A single malicious request is sufficient to cause an out-of-memory crash.\u003c/p\u003e\n\u003cp\u003eThis issue affects decimal: from 0.1.0 before 3.0.0.\u003c/p\u003e"
            },
            {
              "base64": false,
              "type": "text/markdown",
              "value": "Uncontrolled Resource Consumption vulnerability in ericmj decimal allows unauthenticated remote Denial of Service.\n\nThe `decimal` library does not bound the exponent on parsed input. Storing a decimal with a very large exponent (e.g. `Decimal.new(\"1e1000000000\")`) is accepted without error. Subsequent calls to arithmetic functions (`Decimal.add/2`, `Decimal.sub/2`, `Decimal.div/2`M), `Decimal.to_string/2`M with `:normal`M or `:xsd`M format, `Decimal.to_integer/1`M, `Decimal.round/3`M, or `Decimal.compare/3`M with a threshold allocate memory proportional to the exponent value, which can exhaust available memory and crash the BEAM VM.\n\nAny application that accepts user-supplied decimal input and subsequently performs arithmetic, rounding, conversion to integer, or string formatting on it is exposed. A single malicious request is sufficient to cause an out-of-memory crash.\n\nThis issue affects decimal: from 0.1.0 before 3.0.0."
            }
          ],
          "value": "Uncontrolled Resource Consumption vulnerability in ericmj decimal allows unauthenticated remote Denial of Service.\n\nThe decimal library does not bound the exponent on parsed input. Storing a decimal with a very large exponent (e.g. Decimal.new(\"1e1000000000\")) is accepted without error. Subsequent calls to arithmetic functions (Decimal.add/2, Decimal.sub/2, Decimal.div/2M), Decimal.to_string/2M with :normalM or :xsdM format, Decimal.to_integer/1M, Decimal.round/3M, or Decimal.compare/3M with a threshold allocate memory proportional to the exponent value, which can exhaust available memory and crash the BEAM VM.\n\nAny application that accepts user-supplied decimal input and subsequently performs arithmetic, rounding, conversion to integer, or string formatting on it is exposed. A single malicious request is sufficient to cause an out-of-memory crash.\n\nThis issue affects decimal: from 0.1.0 before 3.0.0."
        }
      ],
      "impacts": [
        {
          "capecId": "CAPEC-130",
          "descriptions": [
            {
              "lang": "en",
              "value": "CAPEC-130 Excessive Allocation"
            }
          ]
        }
      ],
      "metrics": [
        {
          "cvssV4_0": {
            "Automatable": "NOT_DEFINED",
            "Recovery": "NOT_DEFINED",
            "Safety": "NOT_DEFINED",
            "attackComplexity": "LOW",
            "attackRequirements": "NONE",
            "attackVector": "LOCAL",
            "baseScore": 6.9,
            "baseSeverity": "MEDIUM",
            "privilegesRequired": "NONE",
            "providerUrgency": "NOT_DEFINED",
            "subAvailabilityImpact": "NONE",
            "subConfidentialityImpact": "NONE",
            "subIntegrityImpact": "NONE",
            "userInteraction": "NONE",
            "valueDensity": "NOT_DEFINED",
            "vectorString": "CVSS:4.0/AV:L/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N",
            "version": "4.0",
            "vulnAvailabilityImpact": "HIGH",
            "vulnConfidentialityImpact": "NONE",
            "vulnIntegrityImpact": "NONE",
            "vulnerabilityResponseEffort": "NOT_DEFINED"
          },
          "format": "CVSS",
          "scenarios": [
            {
              "lang": "en",
              "value": "GENERAL"
            }
          ]
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400 Uncontrolled Resource Consumption",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-11-19T08:33:10.488Z",
        "orgId": "6b3ad84c-e1a6-4bf7-a703-f496b71e49db",
        "shortName": "EEF"
      },
      "references": [
        {
          "tags": [
            "vendor-advisory",
            "related"
          ],
          "url": "https://github.com/ericmj/decimal/security/advisories/GHSA-rhv4-8758-jx7v"
        },
        {
          "name": "EEF CNA record for CVE-2026-32686",
          "tags": [
            "related"
          ],
          "url": "https://cna.erlef.org/cves/CVE-2026-32686.html"
        },
        {
          "name": "OSV record EEF-CVE-2026-32686",
          "tags": [
            "related"
          ],
          "url": "https://osv.dev/vulnerability/EEF-CVE-2026-32686"
        },
        {
          "name": "Introducing commit bc11f4a in ericmj/decimal",
          "tags": [
            "related"
          ],
          "url": "https://github.com/ericmj/decimal/commit/bc11f4a2b6fb61fc1360a0ab4e79141bba918841"
        },
        {
          "name": "Fix commit 6a523f3 in ericmj/decimal",
          "tags": [
            "patch"
          ],
          "url": "https://github.com/ericmj/decimal/commit/6a523f3a73b8c9974540e21c7aa88f1258bb35ae"
        }
      ],
      "source": {
        "discovery": "EXTERNAL"
      },
      "title": "Unbounded exponent in decimal enables unauthenticated DoS"
    }
  },
  "cveMetadata": {
    "assignerOrgId": "6b3ad84c-e1a6-4bf7-a703-f496b71e49db",
    "assignerShortName": "EEF",
    "cveId": "CVE-2026-32686",
    "datePublished": "2026-05-07T14:04:47.222Z",
    "dateReserved": "2026-03-13T09:12:14.474Z",
    "dateUpdated": "2026-11-19T08:33:10.488Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

CVE-2026-32588 (GCVE-0-2026-32588)

Vulnerability from cvelistv5 – Published: 2026-04-07 16:42 – Updated: 2026-04-09 14:43
VLAI
Title
Apache Cassandra: Authenticated DoS via ALTER ROLE Password Hashing
Summary
Authenticated DoS over CQL in Apache Cassandra 4.0, 4.1, 5.0 allows authenticated user to raise query latencies via repeated password changes. Users are recommended to upgrade to version 4.0.20, 4.1.11, 5.0.7, which fixes this issue.
SSVC
Exploitation: none Automatable: no Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-04-09 14:43 UTC
CWE
  • CWE-400 - Uncontrolled Resource Consumption
Assigner
apache CNA under the mitre root
CNA scorecard B 76/100 over 1282 records in the last 180 days details
Impacted products
Vendor Product Version
Apache Software Foundation Apache Cassandra Affected: 4.0 , ≤ 4.0.19 (semver)
Affected: 4.1 , ≤ 4.1.10 (semver)
Affected: 5.0 , ≤ 5.0.6 (semver)
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2026-04-07T17:26:02.509Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "url": "http://www.openwall.com/lists/oss-security/2026/04/07/9"
          }
        ],
        "title": "CVE Program Container"
      },
      {
        "metrics": [
          {
            "cvssV3_1": {
              "attackComplexity": "LOW",
              "attackVector": "NETWORK",
              "availabilityImpact": "HIGH",
              "baseScore": 6.5,
              "baseSeverity": "MEDIUM",
              "confidentialityImpact": "NONE",
              "integrityImpact": "NONE",
              "privilegesRequired": "LOW",
              "scope": "UNCHANGED",
              "userInteraction": "NONE",
              "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
              "version": "3.1"
            }
          },
          {
            "other": {
              "content": {
                "id": "CVE-2026-32588",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-04-09T14:43:30.429610Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-04-09T14:43:57.808Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "collectionURL": "https://repo.maven.apache.org/maven2/",
          "defaultStatus": "unaffected",
          "packageName": "org.apache.cassandra:cassandra-all",
          "product": "Apache Cassandra",
          "vendor": "Apache Software Foundation",
          "versions": [
            {
              "lessThanOrEqual": "4.0.19",
              "status": "affected",
              "version": "4.0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "4.1.10",
              "status": "affected",
              "version": "4.1",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.0.6",
              "status": "affected",
              "version": "5.0",
              "versionType": "semver"
            }
          ]
        }
      ],
      "credits": [
        {
          "lang": "en",
          "type": "reporter",
          "value": "Youlong Chen, Institute of Computing Technology, Chinese Academy of Sciences"
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "Authenticated DoS over CQL in Apache Cassandra 4.0, 4.1, 5.0 allows authenticated user to raise query latencies via repeated password changes.\u003cbr\u003eUsers are recommended to upgrade to version 4.0.20, 4.1.11, 5.0.7, which fixes this issue."
            }
          ],
          "value": "Authenticated DoS over CQL in Apache Cassandra 4.0, 4.1, 5.0 allows authenticated user to raise query latencies via repeated password changes.\nUsers are recommended to upgrade to version 4.0.20, 4.1.11, 5.0.7, which fixes this issue."
        }
      ],
      "metrics": [
        {
          "other": {
            "content": {
              "text": "low"
            },
            "type": "Textual description of severity"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400 Uncontrolled Resource Consumption",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-04-07T16:42:52.361Z",
        "orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
        "shortName": "apache"
      },
      "references": [
        {
          "tags": [
            "vendor-advisory"
          ],
          "url": "https://lists.apache.org/thread/2tnwjdnss378glxrsmnlzz3k53ftphrc"
        }
      ],
      "source": {
        "advisory": "CASSANDRA-21202",
        "discovery": "EXTERNAL"
      },
      "title": "Apache Cassandra: Authenticated DoS via ALTER ROLE Password Hashing",
      "x_generator": {
        "engine": "Vulnogram 0.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
    "assignerShortName": "apache",
    "cveId": "CVE-2026-32588",
    "datePublished": "2026-04-07T16:42:52.361Z",
    "dateReserved": "2026-03-12T13:36:03.338Z",
    "dateUpdated": "2026-04-09T14:43:57.808Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

CVE-2026-31958 (GCVE-0-2026-31958)

Vulnerability from cvelistv5 – Published: 2026-03-11 19:27 – Updated: 2026-04-01 14:32
VLAI
Title
Tornado has a DoS due to too many multipart parts
Summary
Tornado is a Python web framework and asynchronous networking library. In versions of Tornado prior to 6.5.5, the only limit on the number of parts in multipart/form-data is the max_body_size setting (default 100MB). Since parsing occurs synchronously on the main thread, this creates the possibility of denial-of-service due to the cost of parsing very large multipart bodies with many parts. This vulnerability is fixed in 6.5.5.
SSVC
Exploitation: none Automatable: yes Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-03-12 19:55 UTC
CWE
  • CWE-400 - Uncontrolled Resource Consumption
Assigner
GitHub_M CNA under the mitre root
CNA scorecard C 72/100 over 8156 records in the last 180 days details
Impacted products
Vendor Product Version
tornadoweb tornado Affected: < 6.5.5
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-31958",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "yes"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-03-12T19:55:43.911671Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-03-12T19:55:50.969Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      },
      {
        "providerMetadata": {
          "dateUpdated": "2026-04-01T14:32:33.146Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "url": "https://lists.debian.org/debian-lts-announce/2026/04/msg00000.html"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "product": "tornado",
          "vendor": "tornadoweb",
          "versions": [
            {
              "status": "affected",
              "version": "\u003c 6.5.5"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "Tornado is a Python web framework and asynchronous networking library. In versions of Tornado prior to 6.5.5, the only limit on the number of parts in multipart/form-data is the max_body_size setting (default 100MB). Since parsing occurs synchronously on the main thread, this creates the possibility of denial-of-service due to the cost of parsing very large multipart bodies with many parts. This vulnerability is fixed in 6.5.5."
        }
      ],
      "metrics": [
        {
          "cvssV4_0": {
            "attackComplexity": "LOW",
            "attackRequirements": "NONE",
            "attackVector": "NETWORK",
            "baseScore": 8.7,
            "baseSeverity": "HIGH",
            "privilegesRequired": "NONE",
            "subAvailabilityImpact": "NONE",
            "subConfidentialityImpact": "NONE",
            "subIntegrityImpact": "NONE",
            "userInteraction": "NONE",
            "vectorString": "CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N",
            "version": "4.0",
            "vulnAvailabilityImpact": "HIGH",
            "vulnConfidentialityImpact": "NONE",
            "vulnIntegrityImpact": "NONE"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400: Uncontrolled Resource Consumption",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-03-11T19:27:23.380Z",
        "orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
        "shortName": "GitHub_M"
      },
      "references": [
        {
          "name": "https://github.com/tornadoweb/tornado/security/advisories/GHSA-qjxf-f2mg-c6mc",
          "tags": [
            "x_refsource_CONFIRM"
          ],
          "url": "https://github.com/tornadoweb/tornado/security/advisories/GHSA-qjxf-f2mg-c6mc"
        }
      ],
      "source": {
        "advisory": "GHSA-qjxf-f2mg-c6mc",
        "discovery": "UNKNOWN"
      },
      "title": "Tornado has a DoS due to too many multipart parts"
    }
  },
  "cveMetadata": {
    "assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
    "assignerShortName": "GitHub_M",
    "cveId": "CVE-2026-31958",
    "datePublished": "2026-03-11T19:27:23.380Z",
    "dateReserved": "2026-03-10T15:40:10.481Z",
    "dateUpdated": "2026-04-01T14:32:33.146Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

Mitigation
Architecture and Design

Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended. A strong authentication and access control model will help prevent such attacks from occurring in the first place. The login application should be protected against DoS attacks as much as possible. Limiting the database access, perhaps by caching result sets, can help minimize the resources expended. To further limit the potential for a DoS attack, consider tracking the rate of requests received from users and blocking requests that exceed a defined rate threshold.

Mitigation
Architecture and Design
  • Mitigation of resource exhaustion attacks requires that the target system either:
  • recognizes the attack and denies that user further access for a given amount of time, or
  • uniformly throttles all requests in order to make it more difficult to consume resources more quickly than they can again be freed.
  • The first of these solutions is an issue in itself though, since it may allow attackers to prevent the use of the system by a particular valid user. If the attacker impersonates the valid user, they may be able to prevent the user from accessing the server in question.
  • The second solution is simply difficult to effectively institute -- and even when properly done, it does not provide a full solution. It simply makes the attack require more resources on the part of the attacker.
Mitigation
Architecture and Design

Ensure that protocols have specific limits of scale placed on them.

Mitigation
Implementation

Ensure that all failures in resource allocation place the system into a safe posture.

CAPEC-147: XML Ping of the Death

An attacker initiates a resource depletion attack where a large number of small XML messages are delivered at a sufficiently rapid rate to cause a denial of service or crash of the target. Transactions such as repetitive SOAP transactions can deplete resources faster than a simple flooding attack because of the additional resources used by the SOAP protocol and the resources necessary to process SOAP messages. The transactions used are immaterial as long as they cause resource utilization on the target. In other words, this is a normal flooding attack augmented by using messages that will require extra processing on the target.

CAPEC-227: Sustained Client Engagement

An adversary attempts to deny legitimate users access to a resource by continually engaging a specific resource in an attempt to keep the resource tied up as long as possible. The adversary's primary goal is not to crash or flood the target, which would alert defenders; rather it is to repeatedly perform actions or abuse algorithmic flaws such that a given resource is tied up and not available to a legitimate user. By carefully crafting a requests that keep the resource engaged through what is seemingly benign requests, legitimate users are limited or completely denied access to the resource.

CAPEC-492: Regular Expression Exponential Blowup

An adversary may execute an attack on a program that uses a poor Regular Expression(Regex) implementation by choosing input that results in an extreme situation for the Regex. A typical extreme situation operates at exponential time compared to the input size. This is due to most implementations using a Nondeterministic Finite Automaton(NFA) state machine to be built by the Regex algorithm since NFA allows backtracking and thus more complex regular expressions.