CVE-2026-10673 (GCVE-0-2026-10673)
Vulnerability from cvelistv5 – Published: 2026-07-15 17:36 – Updated: 2026-11-04 04:58
VLAI
EPSS
VEX
Title
Out-of-bounds write in ADIN2111/ADIN1110 OA SPI Ethernet RX frame reassembly
Summary
The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx->buf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy'd into ctx->buf[ctx->scur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver's RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy.
Severity
8.3 (High)
SSVC
Exploitation: poc
Automatable: no
Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-07-15 18:00 UTC
Assigner
References
Impacted products
1 product
| Vendor | Product | Version | CPE status | |
|---|---|---|---|---|
| zephyrproject | zephyr |
Affected:
3.7.0 , < 4.3.1
(semver)
Affected: 4.4.0 , < 4.4.1 (semver) |
guessed |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-10673",
"options": [
{
"Exploitation": "poc"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-15T18:00:59.180581Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-15T18:01:15.864Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"references": [
{
"tags": [
"exploit"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-hm6v-4jh4-3qc4"
}
],
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"drivers/ethernet/eth_adin2111.c",
"drivers/ethernet/eth_adin2111_priv.h"
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.3.1",
"status": "affected",
"version": "3.7.0",
"versionType": "semver"
},
{
"lessThan": "4.4.1",
"status": "affected",
"version": "4.4.0",
"versionType": "semver"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx-\u003ebuf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy\u0027d into ctx-\u003ebuf[ctx-\u003escur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver\u0027s RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 8.3,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:H/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-125",
"description": "memory-safety",
"lang": "en",
"type": "CWE"
},
{
"cweId": "CWE-787",
"description": "memory-safety",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-04T04:58:52.327Z",
"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"shortName": "zephyr"
},
"references": [
{
"name": "Fix commit 158df8d08831",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/158df8d088316cdae20816fc07703892280b2acb"
},
{
"name": "Fix commit c98321cbfef2",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/c98321cbfef23c0e3bdf043ccf6b421067c8d508"
},
{
"name": "GHSA-hm6v-4jh4-3qc4",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-hm6v-4jh4-3qc4"
}
],
"title": "Out-of-bounds write in ADIN2111/ADIN1110 OA SPI Ethernet RX frame reassembly",
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"assignerShortName": "zephyr",
"cveId": "CVE-2026-10673",
"datePublished": "2026-07-15T17:36:31.645Z",
"dateReserved": "2026-06-02T15:26:02.427Z",
"dateUpdated": "2026-11-04T04:58:52.327Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-10673",
"date": "2026-11-15",
"epss": "0.00416",
"percentile": "0.36471"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"drivers/ethernet/eth_adin2111.c",
"drivers/ethernet/eth_adin2111_priv.h"
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.3.1",
"status": "affected",
"version": "3.7.0",
"versionType": "semver"
},
{
"lessThan": "4.4.1",
"status": "affected",
"version": "4.4.0",
"versionType": "semver"
}
]
}
],
"source": "vulnerabilities@zephyrproject.org"
}
],
"configurations": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:zephyrproject:zephyr:*:*:*:*:*:*:*:*",
"matchCriteriaId": "9F648F66-9415-47A6-92AD-4C61A70269B2",
"versionEndExcluding": "4.5.0",
"versionStartIncluding": "3.7.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx-\u003ebuf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy\u0027d into ctx-\u003ebuf[ctx-\u003escur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver\u0027s RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy."
},
{
"lang": "es",
"value": "El controlador Ethernet Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L (drivers/ethernet/eth_adin2111.c) reensambla las tramas Ethernet recibidas en modo SPI de OPEN Alliance (OA) copiando fragmentos de datos de 64 bytes suministrados por el dispositivo en un b\u00fafer est\u00e1tico fijo ctx -\u003e buf de tama\u00f1o CONFIG_ETH_ADIN2111_BUFFER_SIZE (por defecto 1524 bytes). En eth_adin2111_oa_data_read(), cada fragmento v\u00e1lido se copiaba con memcpy en ctx -\u003e buf[ctx -\u003e scur] y el cursor de escritura scur avanzaba, sin comprobar que scur + len permaneciera dentro del b\u00fafer. El n\u00famero de fragmentos (hasta 255, del campo BUFSTS RCA) y la longitud por fragmento se toman completamente de los datos de la trama recibidos del cable; el cursor solo se restablece en un fragmento de inicio de trama. Un atacante en el segmento Ethernet de par \u00fanico puede, por lo tanto, enviar una trama cuyo tama\u00f1o reensamblado excede el b\u00fafer configurado, haciendo que el hilo de descarga RX del controlador escriba bytes de trama controlados por el atacante m\u00e1s all\u00e1 del final del b\u00fafer est\u00e1tico en memoria adyacente del controlador/kernel (hasta aproximadamente 14.8 KB en el peor de los casos). Esto es una escritura fuera de l\u00edmites (CWE-787) alcanzable de forma remota/adyacente que puede corromper la memoria y causar denegaci\u00f3n de servicio o potencialmente ejecuci\u00f3n de c\u00f3digo. El defecto se introdujo cuando se a\u00f1adi\u00f3 el soporte para OA SPI (commit 0ca8b0756b1) y se distribuy\u00f3 en las versiones v3.7.0 hasta la v4.4.0. La soluci\u00f3n a\u00f1ade una comprobaci\u00f3n de l\u00edmites que descarta la trama sobredimensionada y restablece el cursor antes de la copia."
}
],
"id": "CVE-2026-10673",
"lastModified": "2026-10-24T21:10:00.130",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "ADJACENT_NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 8.3,
"baseSeverity": "HIGH",
"confidentialityImpact": "LOW",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:H/A:H",
"version": "3.1"
},
"exploitabilityScore": 2.8,
"impactScore": 5.5,
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
},
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "ADJACENT_NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 8.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"exploitabilityScore": 2.8,
"impactScore": 5.9,
"source": "nvd@nist.gov",
"type": "Primary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2026-10673",
"options": [
{
"exploitation": "poc"
},
{
"automatable": "no"
},
{
"technicalImpact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-15T18:00:59.180581Z",
"version": "2.0.3"
}
}
]
},
"published": "2026-07-15T18:16:44.180",
"references": [
{
"source": "vulnerabilities@zephyrproject.org",
"tags": [
"Patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/158df8d088316cdae20816fc07703892280b2acb"
},
{
"source": "vulnerabilities@zephyrproject.org",
"tags": [
"Patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/c98321cbfef23c0e3bdf043ccf6b421067c8d508"
},
{
"source": "vulnerabilities@zephyrproject.org",
"tags": [
"Exploit",
"Patch",
"Vendor Advisory"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-hm6v-4jh4-3qc4"
},
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"tags": [
"Exploit",
"Patch",
"Vendor Advisory"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-hm6v-4jh4-3qc4"
}
],
"sourceIdentifier": "vulnerabilities@zephyrproject.org",
"vulnStatus": "Analyzed",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-125"
},
{
"lang": "en",
"value": "CWE-787"
}
],
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
},
{
"description": [
{
"lang": "en",
"value": "CWE-787"
}
],
"source": "nvd@nist.gov",
"type": "Primary"
}
]
}
},
"vulnrichment": {
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-10673",
"options": [
{
"Exploitation": "poc"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-15T18:00:59.180581Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-15T18:01:09.671Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"references": [
{
"tags": [
"exploit"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-hm6v-4jh4-3qc4"
}
],
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"drivers/ethernet/eth_adin2111.c",
"drivers/ethernet/eth_adin2111_priv.h"
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.3.1",
"status": "affected",
"version": "3.7.0",
"versionType": "semver"
},
{
"lessThan": "4.4.1",
"status": "affected",
"version": "4.4.0",
"versionType": "semver"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx-\u003ebuf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy\u0027d into ctx-\u003ebuf[ctx-\u003escur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver\u0027s RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 8.3,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:H/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-125",
"description": "memory-safety",
"lang": "en",
"type": "CWE"
},
{
"cweId": "CWE-787",
"description": "memory-safety",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-04T04:58:52.327Z",
"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"shortName": "zephyr"
},
"references": [
{
"name": "Fix commit 158df8d08831",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/158df8d088316cdae20816fc07703892280b2acb"
},
{
"name": "Fix commit c98321cbfef2",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/c98321cbfef23c0e3bdf043ccf6b421067c8d508"
},
{
"name": "GHSA-hm6v-4jh4-3qc4",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-hm6v-4jh4-3qc4"
}
],
"title": "Out-of-bounds write in ADIN2111/ADIN1110 OA SPI Ethernet RX frame reassembly",
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"assignerShortName": "zephyr",
"cveId": "CVE-2026-10673",
"datePublished": "2026-07-15T17:36:31.645Z",
"dateReserved": "2026-06-02T15:26:02.427Z",
"dateUpdated": "2026-11-04T04:58:52.327Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
}
}
Loading…
Loading…
Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline
Sightings and recorded dates, grouped by day · UTC
How durations are calculated
Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.
Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.
Loading timeline…
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.