UBUNTU-CVE-2026-34971 (CVE-2026-34971)

Vulnerability from osv_ubuntu – Published: 2026-04-09 19:16 – Updated: 2026-11-04 17:08 – Source website
VLAI
Details

Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.


{
  "affected": [
    {
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "librust-cranelift-dev",
            "binary_version": "0.113.1+26.0.1+dfsg-3"
          }
        ]
      },
      "package": {
        "ecosystem": "Ubuntu:25.10",
        "name": "rust-wasmtime",
        "purl": "pkg:deb/ubuntu/rust-wasmtime@26.0.1+dfsg-3?arch=source\u0026distro=questing"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "26.0.1+dfsg-3"
      ]
    },
    {
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "librust-cranelift-dev",
            "binary_version": "0.123.13+36.0.13+dfsg-1"
          }
        ]
      },
      "package": {
        "ecosystem": "Ubuntu:26.10",
        "name": "rust-wasmtime",
        "purl": "pkg:deb/ubuntu/rust-wasmtime@36.0.13+dfsg-1?arch=source\u0026distro=stonking"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "36.0.5+dfsg-1",
        "36.0.13+dfsg-1"
      ]
    },
    {
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "librust-cranelift-dev",
            "binary_version": "0.123.5+36.0.5+dfsg-1"
          }
        ]
      },
      "package": {
        "ecosystem": "Ubuntu:26.04:LTS",
        "name": "rust-wasmtime",
        "purl": "pkg:deb/ubuntu/rust-wasmtime@36.0.5+dfsg-1?arch=source\u0026distro=resolute"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "26.0.1+dfsg-3",
        "26.0.1+dfsg-4",
        "28.0.1+dfsg-3",
        "29.0.1+dfsg-5",
        "36.0.5+dfsg-1"
      ]
    }
  ],
  "aliases": [],
  "details": "Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime\u0027s Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it\u0027s a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly\u0027s and Cranelift\u0027s semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address\u0027s computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.",
  "id": "UBUNTU-CVE-2026-34971",
  "modified": "2026-11-04T17:08:21Z",
  "published": "2026-04-09T19:16:00Z",
  "references": [
    {
      "type": "REPORT",
      "url": "https://ubuntu.com/security/CVE-2026-34971"
    },
    {
      "type": "REPORT",
      "url": "https://www.cve.org/CVERecord?id=CVE-2026-34971"
    },
    {
      "type": "REPORT",
      "url": "https://github.com/bytecodealliance/wasmtime/security/advisories/GHSA-jhxm-h53p-jm7w"
    }
  ],
  "related": [],
  "schema_version": "1.7.0",
  "severity": [
    {
      "score": "CVSS:4.0/AV:N/AC:L/AT:P/PR:L/UI:N/VC:H/VI:H/VA:H/SC:H/SI:H/SA:H",
      "type": "CVSS_V4"
    },
    {
      "score": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:H",
      "type": "CVSS_V3"
    },
    {
      "score": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:H",
      "type": "CVSS_V3"
    },
    {
      "score": "medium",
      "type": "Ubuntu"
    }
  ],
  "upstream": [
    "CVE-2026-34971"
  ]
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.