CVE-2026-19577 (GCVE-0-2026-19577)
Vulnerability from cvelistv5 – Published: 2026-10-11 17:14 – Updated: 2026-10-15 18:09
VLAI
EPSS
VEX
Title
Out-of-bounds read in IPv6 route forwarding when the nexthop neighbor has no link-layer address
Summary
net_route_ipv6_packet() in subsys/net/ip/route_ipv6.c resolved the nexthop's link-layer address with net_nbr_get_lladdr(nbr->idx) without first checking whether the neighbor cache entry actually had a linked link-layer address. An unresolved neighbor carries idx == NET_NBR_LLADDR_UNKNOWN (0xff), and net_nbr_get_lladdr() in subsys/net/ip/nbr.c performs no runtime bounds check beyond a NET_ASSERT, returning &net_neighbor_lladdr[255] — roughly 2.5 KB past the end of an array whose default size is CONFIG_NET_IPV6_MAX_NEIGHBORS (8). Because the returned pointer is never NULL, the following lladdr == NULL guard does not catch it.
The function is reached from ipv6_route_packet() in subsys/net/ip/ipv6.c for every received unicast IPv6 packet whose destination is not a local address on the receiving interface; CONFIG_NET_IPV6_ROUTE is enabled by default whenever the IPv6 neighbor cache is, so no router or forwarding configuration is needed. net_route_ipv6_get_info() returns the packet's destination itself as the nexthop when a neighbor cache entry for it exists, and the cache lookup does not skip INCOMPLETE entries. An unauthenticated attacker on the same link can therefore force the unresolved state — for example by eliciting traffic to a spoofed, non-existent neighbor address so that net_ipv6_send_ns() creates an INCOMPLETE entry, or by sending a Router Advertisement with no source link-layer address option, which creates a persistently unresolved router neighbor — and then send a packet addressed to that neighbor.
The result is an out-of-bounds read at a fixed index past the neighbor link-layer address array. On builds with CONFIG_ASSERT enabled the assertion fires and the device panics, giving a repeatable remote denial of service. With assertions disabled, the stale out-of-bounds struct net_linkaddr drives a memcmp() over an attacker-uninfluenced length and, when its len byte passes the NET_LINK_ADDR_MAX_LENGTH check, up to 8 bytes of unrelated static RAM are copied into the outgoing frame's destination link-layer address and transmitted on the link, disclosing them to any listener. There is no out-of-bounds write and the offset is not attacker-controlled, which bounds the impact.
Severity
7.1 (High)
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-10-15 17:51 UTC
CWE
- CWE-125 - bounds
Assigner
References
2 references
Impacted products
1 product
| Vendor | Product | Version | CPE status | |
|---|---|---|---|---|
| zephyrproject | zephyr |
Affected:
1.8.0 , < 4.5.0
(semver)
|
guessed |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-19577",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-15T17:51:23.978223Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-10-15T18:09:20.629Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"subsys/net/ip/route.c",
"subsys/net/ip/route_ipv6.c"
],
"programRoutines": [
{
"name": "net_route_ipv6_packet"
},
{
"name": "net_route_packet"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.5.0",
"status": "affected",
"version": "1.8.0",
"versionType": "semver"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "net_route_ipv6_packet() in subsys/net/ip/route_ipv6.c resolved the nexthop\u0027s link-layer address with net_nbr_get_lladdr(nbr-\u003eidx) without first checking whether the neighbor cache entry actually had a linked link-layer address. An unresolved neighbor carries idx == NET_NBR_LLADDR_UNKNOWN (0xff), and net_nbr_get_lladdr() in subsys/net/ip/nbr.c performs no runtime bounds check beyond a NET_ASSERT, returning \u0026net_neighbor_lladdr[255] \u2014 roughly 2.5 KB past the end of an array whose default size is CONFIG_NET_IPV6_MAX_NEIGHBORS (8). Because the returned pointer is never NULL, the following lladdr == NULL guard does not catch it.\n\nThe function is reached from ipv6_route_packet() in subsys/net/ip/ipv6.c for every received unicast IPv6 packet whose destination is not a local address on the receiving interface; CONFIG_NET_IPV6_ROUTE is enabled by default whenever the IPv6 neighbor cache is, so no router or forwarding configuration is needed. net_route_ipv6_get_info() returns the packet\u0027s destination itself as the nexthop when a neighbor cache entry for it exists, and the cache lookup does not skip INCOMPLETE entries. An unauthenticated attacker on the same link can therefore force the unresolved state \u2014 for example by eliciting traffic to a spoofed, non-existent neighbor address so that net_ipv6_send_ns() creates an INCOMPLETE entry, or by sending a Router Advertisement with no source link-layer address option, which creates a persistently unresolved router neighbor \u2014 and then send a packet addressed to that neighbor.\n\nThe result is an out-of-bounds read at a fixed index past the neighbor link-layer address array. On builds with CONFIG_ASSERT enabled the assertion fires and the device panics, giving a repeatable remote denial of service. With assertions disabled, the stale out-of-bounds struct net_linkaddr drives a memcmp() over an attacker-uninfluenced length and, when its len byte passes the NET_LINK_ADDR_MAX_LENGTH check, up to 8 bytes of unrelated static RAM are copied into the outgoing frame\u0027s destination link-layer address and transmitted on the link, disclosing them to any listener. There is no out-of-bounds write and the offset is not attacker-controlled, which bounds the impact."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.1,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-125",
"description": "bounds",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-11T17:14:55.032Z",
"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"shortName": "zephyr"
},
"references": [
{
"name": "Fix commit",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/b0b0e8973d1967114adbb9ed1611d448b5a46519"
},
{
"name": "GHSA-vv76-4m89-95q5",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-vv76-4m89-95q5"
}
],
"title": "Out-of-bounds read in IPv6 route forwarding when the nexthop neighbor has no link-layer address",
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"assignerShortName": "zephyr",
"cveId": "CVE-2026-19577",
"datePublished": "2026-10-11T17:14:55.032Z",
"dateReserved": "2026-08-11T19:57:38.944Z",
"dateUpdated": "2026-10-15T18:09:20.629Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-19577",
"date": "2026-11-09",
"epss": "0.00217",
"percentile": "0.12244"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"subsys/net/ip/route.c",
"subsys/net/ip/route_ipv6.c"
],
"programRoutines": [
{
"name": "net_route_ipv6_packet"
},
{
"name": "net_route_packet"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.5.0",
"status": "affected",
"version": "1.8.0",
"versionType": "semver"
}
]
}
],
"source": "vulnerabilities@zephyrproject.org"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "net_route_ipv6_packet() in subsys/net/ip/route_ipv6.c resolved the nexthop\u0027s link-layer address with net_nbr_get_lladdr(nbr-\u003eidx) without first checking whether the neighbor cache entry actually had a linked link-layer address. An unresolved neighbor carries idx == NET_NBR_LLADDR_UNKNOWN (0xff), and net_nbr_get_lladdr() in subsys/net/ip/nbr.c performs no runtime bounds check beyond a NET_ASSERT, returning \u0026net_neighbor_lladdr[255] \u2014 roughly 2.5 KB past the end of an array whose default size is CONFIG_NET_IPV6_MAX_NEIGHBORS (8). Because the returned pointer is never NULL, the following lladdr == NULL guard does not catch it.\n\nThe function is reached from ipv6_route_packet() in subsys/net/ip/ipv6.c for every received unicast IPv6 packet whose destination is not a local address on the receiving interface; CONFIG_NET_IPV6_ROUTE is enabled by default whenever the IPv6 neighbor cache is, so no router or forwarding configuration is needed. net_route_ipv6_get_info() returns the packet\u0027s destination itself as the nexthop when a neighbor cache entry for it exists, and the cache lookup does not skip INCOMPLETE entries. An unauthenticated attacker on the same link can therefore force the unresolved state \u2014 for example by eliciting traffic to a spoofed, non-existent neighbor address so that net_ipv6_send_ns() creates an INCOMPLETE entry, or by sending a Router Advertisement with no source link-layer address option, which creates a persistently unresolved router neighbor \u2014 and then send a packet addressed to that neighbor.\n\nThe result is an out-of-bounds read at a fixed index past the neighbor link-layer address array. On builds with CONFIG_ASSERT enabled the assertion fires and the device panics, giving a repeatable remote denial of service. With assertions disabled, the stale out-of-bounds struct net_linkaddr drives a memcmp() over an attacker-uninfluenced length and, when its len byte passes the NET_LINK_ADDR_MAX_LENGTH check, up to 8 bytes of unrelated static RAM are copied into the outgoing frame\u0027s destination link-layer address and transmitted on the link, disclosing them to any listener. There is no out-of-bounds write and the offset is not attacker-controlled, which bounds the impact."
}
],
"id": "CVE-2026-19577",
"lastModified": "2026-10-15T19:17:37.213",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "ADJACENT_NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 7.1,
"baseSeverity": "HIGH",
"confidentialityImpact": "LOW",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H",
"version": "3.1"
},
"exploitabilityScore": 2.8,
"impactScore": 4.2,
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2026-19577",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-15T17:51:23.978223Z",
"version": "2.0.3"
}
}
]
},
"published": "2026-10-11T18:16:58.433",
"references": [
{
"source": "vulnerabilities@zephyrproject.org",
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/b0b0e8973d1967114adbb9ed1611d448b5a46519"
},
{
"source": "vulnerabilities@zephyrproject.org",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-vv76-4m89-95q5"
}
],
"sourceIdentifier": "vulnerabilities@zephyrproject.org",
"vulnStatus": "Awaiting Analysis",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-125"
}
],
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
}
]
}
},
"vulnrichment": {
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-19577",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-15T17:51:23.978223Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-10-15T17:51:24.588Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"subsys/net/ip/route.c",
"subsys/net/ip/route_ipv6.c"
],
"programRoutines": [
{
"name": "net_route_ipv6_packet"
},
{
"name": "net_route_packet"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.5.0",
"status": "affected",
"version": "1.8.0",
"versionType": "semver"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "net_route_ipv6_packet() in subsys/net/ip/route_ipv6.c resolved the nexthop\u0027s link-layer address with net_nbr_get_lladdr(nbr-\u003eidx) without first checking whether the neighbor cache entry actually had a linked link-layer address. An unresolved neighbor carries idx == NET_NBR_LLADDR_UNKNOWN (0xff), and net_nbr_get_lladdr() in subsys/net/ip/nbr.c performs no runtime bounds check beyond a NET_ASSERT, returning \u0026net_neighbor_lladdr[255] \u2014 roughly 2.5 KB past the end of an array whose default size is CONFIG_NET_IPV6_MAX_NEIGHBORS (8). Because the returned pointer is never NULL, the following lladdr == NULL guard does not catch it.\n\nThe function is reached from ipv6_route_packet() in subsys/net/ip/ipv6.c for every received unicast IPv6 packet whose destination is not a local address on the receiving interface; CONFIG_NET_IPV6_ROUTE is enabled by default whenever the IPv6 neighbor cache is, so no router or forwarding configuration is needed. net_route_ipv6_get_info() returns the packet\u0027s destination itself as the nexthop when a neighbor cache entry for it exists, and the cache lookup does not skip INCOMPLETE entries. An unauthenticated attacker on the same link can therefore force the unresolved state \u2014 for example by eliciting traffic to a spoofed, non-existent neighbor address so that net_ipv6_send_ns() creates an INCOMPLETE entry, or by sending a Router Advertisement with no source link-layer address option, which creates a persistently unresolved router neighbor \u2014 and then send a packet addressed to that neighbor.\n\nThe result is an out-of-bounds read at a fixed index past the neighbor link-layer address array. On builds with CONFIG_ASSERT enabled the assertion fires and the device panics, giving a repeatable remote denial of service. With assertions disabled, the stale out-of-bounds struct net_linkaddr drives a memcmp() over an attacker-uninfluenced length and, when its len byte passes the NET_LINK_ADDR_MAX_LENGTH check, up to 8 bytes of unrelated static RAM are copied into the outgoing frame\u0027s destination link-layer address and transmitted on the link, disclosing them to any listener. There is no out-of-bounds write and the offset is not attacker-controlled, which bounds the impact."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.1,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-125",
"description": "bounds",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-11T17:14:55.032Z",
"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"shortName": "zephyr"
},
"references": [
{
"name": "Fix commit",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/b0b0e8973d1967114adbb9ed1611d448b5a46519"
},
{
"name": "GHSA-vv76-4m89-95q5",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-vv76-4m89-95q5"
}
],
"title": "Out-of-bounds read in IPv6 route forwarding when the nexthop neighbor has no link-layer address",
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"assignerShortName": "zephyr",
"cveId": "CVE-2026-19577",
"datePublished": "2026-10-11T17:14:55.032Z",
"dateReserved": "2026-08-11T19:57:38.944Z",
"dateUpdated": "2026-10-15T18:09:20.629Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
}
}
Loading…
Loading…
Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline
Sightings and recorded dates, grouped by day · UTC
How durations are calculated
Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.
Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.
Loading timeline…
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.