CVE-2026-18748 (GCVE-0-2026-18748)

Vulnerability from cvelistv5 – Published: 2026-10-21 18:19 – Updated: 2026-10-23 21:31
VLAI
Title
Out-of-bounds read in Bluetooth Classic A2DP codec information element handling
Summary
The Bluetooth Classic A2DP host stores a codec Information Element (IE) in struct bt_a2dp_codec_ie, a one-byte len field plus a fixed 8-byte codec_ie[] array. When an AVDTP peer sent a codec IE longer than 8 bytes, a2dp_process_config_ind() in subsys/bluetooth/host/classic/a2dp.c copied only the first 8 bytes but assigned the full, attacker-chosen length to len, and then persisted that inconsistent structure into the application's struct bt_a2dp_stream via stream->codec_config. bt_a2dp_get_config_cb() and bt_a2dp_set_config_cb() had the same truncate-the-copy-but-keep-the-length pattern. Every later consumer trusts len. In particular the responder for an incoming AVDTP GET_CONFIGURATION, a2dp_get_config_ind(), executes net_buf_add_mem(rsp_buf, &ep->stream->codec_config.codec_ie[0], ep->stream->codec_config.len), so a paired BR/EDR peer that first sends a SET_CONFIGURATION carrying an oversized codec IE and then requests the configuration back causes the stack to read up to roughly 245 bytes past the end of the 8-byte array and transmit them in the response. codec_config is the last member of struct bt_a2dp_stream, so the read runs into memory adjacent to the application's stream object. The same inconsistency is also handed to the config_req(), reconfig_req() and get_config_rsp() application callbacks, where a natural memcpy() of len bytes performs a further out-of-bounds read. Reaching the on-air disclosure requires CONFIG_BT_CLASSIC with CONFIG_BT_A2DP, an AVDTP peer that has completed pairing (the AVDTP L2CAP channel requires BT_SECURITY_L2), and a local endpoint registered for a non-SBC codec — BT_A2DP_MPEG1/BT_A2DP_MPEG2/BT_A2DP_ATRAC/BT_A2DP_VENDOR via BT_A2DP_EP_INIT() — because the SBC branch already pins the IE length to 4 bytes. The bt_a2dp_get_config_cb() response path has no such gate and hands the lying length to any application. There is no out-of-bounds write: the net_buf tailroom check bounds the destination, so the impact is limited to disclosure of a bounded region of adjacent RAM to the peer. The fix replaces the hardcoded BT_A2DP_MAX_IE_LENGTH with the configurable CONFIG_BT_A2DP_CODEC_MAX_IE_LEN (default 8, range 4–253), sizes codec_ie[] from it, and rejects any received IE that exceeds it instead of silently truncating, so len can no longer exceed the number of valid bytes.
Severity
3.5 (Low)
CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N
SSVC
Exploitation: none Automatable: no Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-10-23 20:42 UTC
CWE
Assigner
zephyr CNA under the mitre root
CNA scorecard B 77/100 over 194 records in the last 180 days details
References
Impacted products
Vendor Product Version CPE status
zephyrproject zephyr Affected: 4.3.0 , ≤ 4.4.2 (semver)
guessed Create a notification for this product.
Show details on NVD website
To clipboard 

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-18748",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-10-23T20:42:53.954844Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-10-23T21:31:20.955Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
          "defaultStatus": "unaffected",
          "packageName": "zephyr",
          "product": "zephyr",
          "programFiles": [
            "include/zephyr/bluetooth/classic/a2dp.h",
            "subsys/bluetooth/host/classic/Kconfig",
            "subsys/bluetooth/host/classic/a2dp.c"
          ],
          "programRoutines": [
            {
              "name": "a2dp_get_config_ind"
            },
            {
              "name": "a2dp_process_config_ind"
            },
            {
              "name": "bt_a2dp_get_config_cb"
            }
          ],
          "vendor": "zephyrproject",
          "versions": [
            {
              "lessThanOrEqual": "4.4.2",
              "status": "affected",
              "version": "4.3.0",
              "versionType": "semver"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "The Bluetooth Classic A2DP host stores a codec Information Element (IE) in struct bt_a2dp_codec_ie, a one-byte len field plus a fixed 8-byte codec_ie[] array. When an AVDTP peer sent a codec IE longer than 8 bytes, a2dp_process_config_ind() in subsys/bluetooth/host/classic/a2dp.c copied only the first 8 bytes but assigned the full, attacker-chosen length to len, and then persisted that inconsistent structure into the application\u0027s struct bt_a2dp_stream via stream-\u003ecodec_config. bt_a2dp_get_config_cb() and bt_a2dp_set_config_cb() had the same truncate-the-copy-but-keep-the-length pattern.\n\nEvery later consumer trusts len. In particular the responder for an incoming AVDTP GET_CONFIGURATION, a2dp_get_config_ind(), executes net_buf_add_mem(rsp_buf, \u0026ep-\u003estream-\u003ecodec_config.codec_ie[0], ep-\u003estream-\u003ecodec_config.len), so a paired BR/EDR peer that first sends a SET_CONFIGURATION carrying an oversized codec IE and then requests the configuration back causes the stack to read up to roughly 245 bytes past the end of the 8-byte array and transmit them in the response. codec_config is the last member of struct bt_a2dp_stream, so the read runs into memory adjacent to the application\u0027s stream object. The same inconsistency is also handed to the config_req(), reconfig_req() and get_config_rsp() application callbacks, where a natural memcpy() of len bytes performs a further out-of-bounds read.\n\nReaching the on-air disclosure requires CONFIG_BT_CLASSIC with CONFIG_BT_A2DP, an AVDTP peer that has completed pairing (the AVDTP L2CAP channel requires BT_SECURITY_L2), and a local endpoint registered for a non-SBC codec \u2014 BT_A2DP_MPEG1/BT_A2DP_MPEG2/BT_A2DP_ATRAC/BT_A2DP_VENDOR via BT_A2DP_EP_INIT() \u2014 because the SBC branch already pins the IE length to 4 bytes. The bt_a2dp_get_config_cb() response path has no such gate and hands the lying length to any application. There is no out-of-bounds write: the net_buf tailroom check bounds the destination, so the impact is limited to disclosure of a bounded region of adjacent RAM to the peer.\n\nThe fix replaces the hardcoded BT_A2DP_MAX_IE_LENGTH with the configurable CONFIG_BT_A2DP_CODEC_MAX_IE_LEN (default 8, range 4\u2013253), sizes codec_ie[] from it, and rejects any received IE that exceeds it instead of silently truncating, so len can no longer exceed the number of valid bytes."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "baseScore": 3.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N",
            "version": "3.1"
          },
          "format": "CVSS"
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-125",
              "description": "bounds",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-10-21T18:19:29.937Z",
        "orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
        "shortName": "zephyr"
      },
      "references": [
        {
          "name": "Fix commit",
          "tags": [
            "patch"
          ],
          "url": "https://github.com/zephyrproject-rtos/zephyr/commit/c5f649f4714e625362fbaa93ffd7419f9c27342b"
        },
        {
          "name": "GHSA-6qq5-25mp-x5rg",
          "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-6qq5-25mp-x5rg"
        }
      ],
      "title": "Out-of-bounds read in Bluetooth Classic A2DP codec information element handling",
      "x_generator": {
        "engine": "cvelib 1.8.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
    "assignerShortName": "zephyr",
    "cveId": "CVE-2026-18748",
    "datePublished": "2026-10-21T18:19:29.937Z",
    "dateReserved": "2026-08-03T21:22:14.200Z",
    "dateUpdated": "2026-10-23T21:31:20.955Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-18748",
      "date": "2026-10-26",
      "epss": "0.00203",
      "percentile": "0.10123"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
                "defaultStatus": "unaffected",
                "packageName": "zephyr",
                "product": "zephyr",
                "programFiles": [
                  "include/zephyr/bluetooth/classic/a2dp.h",
                  "subsys/bluetooth/host/classic/Kconfig",
                  "subsys/bluetooth/host/classic/a2dp.c"
                ],
                "programRoutines": [
                  {
                    "name": "a2dp_get_config_ind"
                  },
                  {
                    "name": "a2dp_process_config_ind"
                  },
                  {
                    "name": "bt_a2dp_get_config_cb"
                  }
                ],
                "vendor": "zephyrproject",
                "versions": [
                  {
                    "lessThanOrEqual": "4.4.2",
                    "status": "affected",
                    "version": "4.3.0",
                    "versionType": "semver"
                  }
                ]
              }
            ],
            "source": "vulnerabilities@zephyrproject.org"
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "The Bluetooth Classic A2DP host stores a codec Information Element (IE) in struct bt_a2dp_codec_ie, a one-byte len field plus a fixed 8-byte codec_ie[] array. When an AVDTP peer sent a codec IE longer than 8 bytes, a2dp_process_config_ind() in subsys/bluetooth/host/classic/a2dp.c copied only the first 8 bytes but assigned the full, attacker-chosen length to len, and then persisted that inconsistent structure into the application\u0027s struct bt_a2dp_stream via stream-\u003ecodec_config. bt_a2dp_get_config_cb() and bt_a2dp_set_config_cb() had the same truncate-the-copy-but-keep-the-length pattern.\n\nEvery later consumer trusts len. In particular the responder for an incoming AVDTP GET_CONFIGURATION, a2dp_get_config_ind(), executes net_buf_add_mem(rsp_buf, \u0026ep-\u003estream-\u003ecodec_config.codec_ie[0], ep-\u003estream-\u003ecodec_config.len), so a paired BR/EDR peer that first sends a SET_CONFIGURATION carrying an oversized codec IE and then requests the configuration back causes the stack to read up to roughly 245 bytes past the end of the 8-byte array and transmit them in the response. codec_config is the last member of struct bt_a2dp_stream, so the read runs into memory adjacent to the application\u0027s stream object. The same inconsistency is also handed to the config_req(), reconfig_req() and get_config_rsp() application callbacks, where a natural memcpy() of len bytes performs a further out-of-bounds read.\n\nReaching the on-air disclosure requires CONFIG_BT_CLASSIC with CONFIG_BT_A2DP, an AVDTP peer that has completed pairing (the AVDTP L2CAP channel requires BT_SECURITY_L2), and a local endpoint registered for a non-SBC codec \u2014 BT_A2DP_MPEG1/BT_A2DP_MPEG2/BT_A2DP_ATRAC/BT_A2DP_VENDOR via BT_A2DP_EP_INIT() \u2014 because the SBC branch already pins the IE length to 4 bytes. The bt_a2dp_get_config_cb() response path has no such gate and hands the lying length to any application. There is no out-of-bounds write: the net_buf tailroom check bounds the destination, so the impact is limited to disclosure of a bounded region of adjacent RAM to the peer.\n\nThe fix replaces the hardcoded BT_A2DP_MAX_IE_LENGTH with the configurable CONFIG_BT_A2DP_CODEC_MAX_IE_LEN (default 8, range 4\u2013253), sizes codec_ie[] from it, and rejects any received IE that exceeds it instead of silently truncating, so len can no longer exceed the number of valid bytes."
          }
        ],
        "id": "CVE-2026-18748",
        "lastModified": "2026-10-23T22:16:59.753",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "LOW",
                "attackVector": "ADJACENT_NETWORK",
                "availabilityImpact": "NONE",
                "baseScore": 3.5,
                "baseSeverity": "LOW",
                "confidentialityImpact": "LOW",
                "integrityImpact": "NONE",
                "privilegesRequired": "LOW",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N",
                "version": "3.1"
              },
              "exploitabilityScore": 2.1,
              "impactScore": 1.4,
              "source": "vulnerabilities@zephyrproject.org",
              "type": "Secondary"
            }
          ],
          "ssvcV203": [
            {
              "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "ssvcData": {
                "id": "CVE-2026-18748",
                "options": [
                  {
                    "exploitation": "none"
                  },
                  {
                    "automatable": "no"
                  },
                  {
                    "technicalImpact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-10-23T20:42:53.954844Z",
                "version": "2.0.3"
              }
            }
          ]
        },
        "published": "2026-10-21T19:17:02.503",
        "references": [
          {
            "source": "vulnerabilities@zephyrproject.org",
            "url": "https://github.com/zephyrproject-rtos/zephyr/commit/c5f649f4714e625362fbaa93ffd7419f9c27342b"
          },
          {
            "source": "vulnerabilities@zephyrproject.org",
            "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-6qq5-25mp-x5rg"
          }
        ],
        "sourceIdentifier": "vulnerabilities@zephyrproject.org",
        "vulnStatus": "Awaiting Analysis",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "CWE-125"
              }
            ],
            "source": "vulnerabilities@zephyrproject.org",
            "type": "Secondary"
          }
        ]
      }
    },
    "vulnrichment": {
      "containers": {
        "adp": [
          {
            "metrics": [
              {
                "other": {
                  "content": {
                    "id": "CVE-2026-18748",
                    "options": [
                      {
                        "Exploitation": "none"
                      },
                      {
                        "Automatable": "no"
                      },
                      {
                        "Technical Impact": "partial"
                      }
                    ],
                    "role": "CISA Coordinator",
                    "timestamp": "2026-10-23T20:42:53.954844Z",
                    "version": "2.0.3"
                  },
                  "type": "ssvc"
                }
              }
            ],
            "providerMetadata": {
              "dateUpdated": "2026-10-23T20:42:54.775Z",
              "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "shortName": "CISA-ADP"
            },
            "title": "CISA ADP Vulnrichment"
          }
        ],
        "cna": {
          "affected": [
            {
              "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
              "defaultStatus": "unaffected",
              "packageName": "zephyr",
              "product": "zephyr",
              "programFiles": [
                "include/zephyr/bluetooth/classic/a2dp.h",
                "subsys/bluetooth/host/classic/Kconfig",
                "subsys/bluetooth/host/classic/a2dp.c"
              ],
              "programRoutines": [
                {
                  "name": "a2dp_get_config_ind"
                },
                {
                  "name": "a2dp_process_config_ind"
                },
                {
                  "name": "bt_a2dp_get_config_cb"
                }
              ],
              "vendor": "zephyrproject",
              "versions": [
                {
                  "lessThanOrEqual": "4.4.2",
                  "status": "affected",
                  "version": "4.3.0",
                  "versionType": "semver"
                }
              ]
            }
          ],
          "descriptions": [
            {
              "lang": "en",
              "value": "The Bluetooth Classic A2DP host stores a codec Information Element (IE) in struct bt_a2dp_codec_ie, a one-byte len field plus a fixed 8-byte codec_ie[] array. When an AVDTP peer sent a codec IE longer than 8 bytes, a2dp_process_config_ind() in subsys/bluetooth/host/classic/a2dp.c copied only the first 8 bytes but assigned the full, attacker-chosen length to len, and then persisted that inconsistent structure into the application\u0027s struct bt_a2dp_stream via stream-\u003ecodec_config. bt_a2dp_get_config_cb() and bt_a2dp_set_config_cb() had the same truncate-the-copy-but-keep-the-length pattern.\n\nEvery later consumer trusts len. In particular the responder for an incoming AVDTP GET_CONFIGURATION, a2dp_get_config_ind(), executes net_buf_add_mem(rsp_buf, \u0026ep-\u003estream-\u003ecodec_config.codec_ie[0], ep-\u003estream-\u003ecodec_config.len), so a paired BR/EDR peer that first sends a SET_CONFIGURATION carrying an oversized codec IE and then requests the configuration back causes the stack to read up to roughly 245 bytes past the end of the 8-byte array and transmit them in the response. codec_config is the last member of struct bt_a2dp_stream, so the read runs into memory adjacent to the application\u0027s stream object. The same inconsistency is also handed to the config_req(), reconfig_req() and get_config_rsp() application callbacks, where a natural memcpy() of len bytes performs a further out-of-bounds read.\n\nReaching the on-air disclosure requires CONFIG_BT_CLASSIC with CONFIG_BT_A2DP, an AVDTP peer that has completed pairing (the AVDTP L2CAP channel requires BT_SECURITY_L2), and a local endpoint registered for a non-SBC codec \u2014 BT_A2DP_MPEG1/BT_A2DP_MPEG2/BT_A2DP_ATRAC/BT_A2DP_VENDOR via BT_A2DP_EP_INIT() \u2014 because the SBC branch already pins the IE length to 4 bytes. The bt_a2dp_get_config_cb() response path has no such gate and hands the lying length to any application. There is no out-of-bounds write: the net_buf tailroom check bounds the destination, so the impact is limited to disclosure of a bounded region of adjacent RAM to the peer.\n\nThe fix replaces the hardcoded BT_A2DP_MAX_IE_LENGTH with the configurable CONFIG_BT_A2DP_CODEC_MAX_IE_LEN (default 8, range 4\u2013253), sizes codec_ie[] from it, and rejects any received IE that exceeds it instead of silently truncating, so len can no longer exceed the number of valid bytes."
            }
          ],
          "metrics": [
            {
              "cvssV3_1": {
                "baseScore": 3.5,
                "baseSeverity": "LOW",
                "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N",
                "version": "3.1"
              },
              "format": "CVSS"
            }
          ],
          "problemTypes": [
            {
              "descriptions": [
                {
                  "cweId": "CWE-125",
                  "description": "bounds",
                  "lang": "en",
                  "type": "CWE"
                }
              ]
            }
          ],
          "providerMetadata": {
            "dateUpdated": "2026-10-21T18:19:29.937Z",
            "orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
            "shortName": "zephyr"
          },
          "references": [
            {
              "name": "Fix commit",
              "tags": [
                "patch"
              ],
              "url": "https://github.com/zephyrproject-rtos/zephyr/commit/c5f649f4714e625362fbaa93ffd7419f9c27342b"
            },
            {
              "name": "GHSA-6qq5-25mp-x5rg",
              "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-6qq5-25mp-x5rg"
            }
          ],
          "title": "Out-of-bounds read in Bluetooth Classic A2DP codec information element handling",
          "x_generator": {
            "engine": "cvelib 1.8.0"
          }
        }
      },
      "cveMetadata": {
        "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
        "assignerShortName": "zephyr",
        "cveId": "CVE-2026-18748",
        "datePublished": "2026-10-21T18:19:29.937Z",
        "dateReserved": "2026-08-03T21:22:14.200Z",
        "dateUpdated": "2026-10-23T21:31:20.955Z",
        "state": "PUBLISHED"
      },
      "dataType": "CVE_RECORD",
      "dataVersion": "5.2"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON

Loading timeline…




    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.