CVE-2026-82962 (GCVE-0-2026-82962)
Vulnerability from cvelistv5 – Published: 2026-10-28 16:59 – Updated: 2026-10-28 16:59
VLAI
EPSS
VEX
Title
Out-of-bounds write in Zephyr Ethernet L2 when adding the link-layer header to a forwarded packet
Summary
ethernet_fill_header() in subsys/net/l2/ethernet/ethernet.c can prepend the Ethernet header in place, by pushing it into the headroom of the packet's first fragment, instead of allocating a separate header fragment. Before this fix the in-place path was selected purely from the build-time value of CONFIG_NET_L2_ETHERNET_RESERVE_HEADER, with no check that the packet actually has that headroom, and then called net_buf_push(pkt->buffer, hdr_len). Only Ethernet TX allocations reserve that space: net_pkt_alloc_buffer() invokes the L2 alloc hook (ethernet_l2_alloc()) only when is_pkt_tx() is true and the packet's interface is the Ethernet interface.
A packet that was allocated by a different L2 and then handed to Ethernet for transmission therefore has too little (usually zero) headroom. Such packets are produced by ordinary routing and tunnelling paths: net_route_packet_if() re-targets a received packet to another interface when CONFIG_NET_IPV4_FORWARDING / CONFIG_NET_IPV6_FORWARDING are enabled (for example an 802.15.4/OpenThread or PPP interface forwarding to Wi-Fi/Ethernet), net_route_ipv6_mcast_forward_packet() forwards an RX-slab clone that carries no reserve, and the IPIP tunnel interface_send() prepends an outer IP header allocated on the virtual interface. In these configurations a remote or adjacent attacker triggers the condition simply by sending traffic that the device forwards.
Because net_buf_simple_push() only asserts on the headroom bound, a build without CONFIG_ASSERT (and without the newer CONFIG_NET_BUF_HARDENING) moves the fragment data pointer below the start of its data block and writes 14 bytes — 18 with VLAN — of Ethernet header out of bounds. With the default fixed-size buffer pools this overwrites the tail of the neighbouring buffer's payload or memory preceding the pool array; with variable-size pools it overwrites the buffer reference count and the heap chunk header. The attacker controls neither the written bytes nor the offset, so the practical impact is memory corruption leading to a crash, packet corruption, or heap inconsistency rather than controlled code execution. The fix takes the in-place path only when net_buf_headroom(pkt->buffer) is large enough and otherwise falls back to a separate header fragment.
Severity
6.5 (Medium)
CWE
- CWE-787 - memory-safety
Assigner
References
2 references
Impacted products
1 product
| Vendor | Product | Version | CPE status | |
|---|---|---|---|---|
| zephyrproject | zephyr |
Affected:
4.1.0 , ≤ 4.4.2
(semver)
|
guessed |
{
"containers": {
"cna": {
"affected": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"subsys/net/l2/ethernet/ethernet.c"
],
"programRoutines": [
{
"name": "ethernet_fill_header"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThanOrEqual": "4.4.2",
"status": "affected",
"version": "4.1.0",
"versionType": "semver"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "ethernet_fill_header() in subsys/net/l2/ethernet/ethernet.c can prepend the Ethernet header in place, by pushing it into the headroom of the packet\u0027s first fragment, instead of allocating a separate header fragment. Before this fix the in-place path was selected purely from the build-time value of CONFIG_NET_L2_ETHERNET_RESERVE_HEADER, with no check that the packet actually has that headroom, and then called net_buf_push(pkt-\u003ebuffer, hdr_len). Only Ethernet TX allocations reserve that space: net_pkt_alloc_buffer() invokes the L2 alloc hook (ethernet_l2_alloc()) only when is_pkt_tx() is true and the packet\u0027s interface is the Ethernet interface.\n\nA packet that was allocated by a different L2 and then handed to Ethernet for transmission therefore has too little (usually zero) headroom. Such packets are produced by ordinary routing and tunnelling paths: net_route_packet_if() re-targets a received packet to another interface when CONFIG_NET_IPV4_FORWARDING / CONFIG_NET_IPV6_FORWARDING are enabled (for example an 802.15.4/OpenThread or PPP interface forwarding to Wi-Fi/Ethernet), net_route_ipv6_mcast_forward_packet() forwards an RX-slab clone that carries no reserve, and the IPIP tunnel interface_send() prepends an outer IP header allocated on the virtual interface. In these configurations a remote or adjacent attacker triggers the condition simply by sending traffic that the device forwards.\n\nBecause net_buf_simple_push() only asserts on the headroom bound, a build without CONFIG_ASSERT (and without the newer CONFIG_NET_BUF_HARDENING) moves the fragment data pointer below the start of its data block and writes 14 bytes \u2014 18 with VLAN \u2014 of Ethernet header out of bounds. With the default fixed-size buffer pools this overwrites the tail of the neighbouring buffer\u0027s payload or memory preceding the pool array; with variable-size pools it overwrites the buffer reference count and the heap chunk header. The attacker controls neither the written bytes nor the offset, so the practical impact is memory corruption leading to a crash, packet corruption, or heap inconsistency rather than controlled code execution. The fix takes the in-place path only when net_buf_headroom(pkt-\u003ebuffer) is large enough and otherwise falls back to a separate header fragment."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 6.5,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-787",
"description": "memory-safety",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-28T16:59:00.030Z",
"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"shortName": "zephyr"
},
"references": [
{
"name": "Fix commit",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/b39f86ea61d0a0fdd7e9f145110649394e2c22ca"
},
{
"name": "GHSA-56gp-jq94-c9hh",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-56gp-jq94-c9hh"
}
],
"title": "Out-of-bounds write in Zephyr Ethernet L2 when adding the link-layer header to a forwarded packet",
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"assignerShortName": "zephyr",
"cveId": "CVE-2026-82962",
"datePublished": "2026-10-28T16:59:00.030Z",
"dateReserved": "2026-08-31T13:10:34.853Z",
"dateUpdated": "2026-10-28T16:59:00.030Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-82962",
"date": "2026-10-29",
"epss": "0.00264",
"percentile": "0.1829"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"subsys/net/l2/ethernet/ethernet.c"
],
"programRoutines": [
{
"name": "ethernet_fill_header"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThanOrEqual": "4.4.2",
"status": "affected",
"version": "4.1.0",
"versionType": "semver"
}
]
}
],
"source": "vulnerabilities@zephyrproject.org"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "ethernet_fill_header() in subsys/net/l2/ethernet/ethernet.c can prepend the Ethernet header in place, by pushing it into the headroom of the packet\u0027s first fragment, instead of allocating a separate header fragment. Before this fix the in-place path was selected purely from the build-time value of CONFIG_NET_L2_ETHERNET_RESERVE_HEADER, with no check that the packet actually has that headroom, and then called net_buf_push(pkt-\u003ebuffer, hdr_len). Only Ethernet TX allocations reserve that space: net_pkt_alloc_buffer() invokes the L2 alloc hook (ethernet_l2_alloc()) only when is_pkt_tx() is true and the packet\u0027s interface is the Ethernet interface.\n\nA packet that was allocated by a different L2 and then handed to Ethernet for transmission therefore has too little (usually zero) headroom. Such packets are produced by ordinary routing and tunnelling paths: net_route_packet_if() re-targets a received packet to another interface when CONFIG_NET_IPV4_FORWARDING / CONFIG_NET_IPV6_FORWARDING are enabled (for example an 802.15.4/OpenThread or PPP interface forwarding to Wi-Fi/Ethernet), net_route_ipv6_mcast_forward_packet() forwards an RX-slab clone that carries no reserve, and the IPIP tunnel interface_send() prepends an outer IP header allocated on the virtual interface. In these configurations a remote or adjacent attacker triggers the condition simply by sending traffic that the device forwards.\n\nBecause net_buf_simple_push() only asserts on the headroom bound, a build without CONFIG_ASSERT (and without the newer CONFIG_NET_BUF_HARDENING) moves the fragment data pointer below the start of its data block and writes 14 bytes \u2014 18 with VLAN \u2014 of Ethernet header out of bounds. With the default fixed-size buffer pools this overwrites the tail of the neighbouring buffer\u0027s payload or memory preceding the pool array; with variable-size pools it overwrites the buffer reference count and the heap chunk header. The attacker controls neither the written bytes nor the offset, so the practical impact is memory corruption leading to a crash, packet corruption, or heap inconsistency rather than controlled code execution. The fix takes the in-place path only when net_buf_headroom(pkt-\u003ebuffer) is large enough and otherwise falls back to a separate header fragment."
}
],
"id": "CVE-2026-82962",
"lastModified": "2026-10-28T17:18:43.950",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "HIGH",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 6.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "LOW",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H",
"version": "3.1"
},
"exploitabilityScore": 2.2,
"impactScore": 4.2,
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
}
]
},
"published": "2026-10-28T17:18:43.843",
"references": [
{
"source": "vulnerabilities@zephyrproject.org",
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/b39f86ea61d0a0fdd7e9f145110649394e2c22ca"
},
{
"source": "vulnerabilities@zephyrproject.org",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-56gp-jq94-c9hh"
}
],
"sourceIdentifier": "vulnerabilities@zephyrproject.org",
"vulnStatus": "Awaiting Analysis",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-787"
}
],
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
}
]
}
}
}
}
Loading…
Loading…
Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline
Sightings and recorded dates, grouped by day · UTC
Loading timeline…
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.