CVE-2026-31764 (GCVE-0-2026-31764)

Vulnerability from cvelistv5 – Published: 2026-05-01 14:14 – Updated: 2026-05-11 22:15
VLAI
Title
iio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only
Summary
In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only The st_lsm6dsx_hwfifo_odr_store() function, which is called when userspace writes the buffer sampling frequency sysfs attribute, calls st_lsm6dsx_check_odr(), which accesses the odr_table array at index `sensor->id`; since this array is only 2 entries long, an access for any sensor type other than accelerometer or gyroscope is an out-of-bounds access. The motivation for being able to set a buffer frequency different from the sensor sampling frequency is to support use cases that need accurate event detection (which requires a high sampling frequency) while retrieving sensor data at low frequency. Since all the supported event types are generated from acceleration data only, do not create the buffer sampling frequency attribute for sensor types other than the accelerometer.
Assigner
Linux CNA under the mitre root
CNA scorecard D 53/100 over 6660 records in the last 180 days details
Impacted products
Vendor Product Version CPE status
Linux Linux Affected: 6b648a36c200dfd3e776e657a4c8a8ce63fb52d3 , < 3225a81e8d264442b14c7c1bc965ebafa3c0ee01 (git)
Affected: 6b648a36c200dfd3e776e657a4c8a8ce63fb52d3 , < 679c04c10d65d32a3f269e696b22912ff0a001b9 (git)
guessed Create a notification for this product.
Linux Linux Affected: 6.19
Unaffected: 0 , < 6.19 (semver)
Unaffected: 6.19.12 , ≤ 6.19.* (semver)
Unaffected: 7.0 , ≤ * (original_commit_for_fix)
guessed Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "3225a81e8d264442b14c7c1bc965ebafa3c0ee01",
              "status": "affected",
              "version": "6b648a36c200dfd3e776e657a4c8a8ce63fb52d3",
              "versionType": "git"
            },
            {
              "lessThan": "679c04c10d65d32a3f269e696b22912ff0a001b9",
              "status": "affected",
              "version": "6b648a36c200dfd3e776e657a4c8a8ce63fb52d3",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.19"
            },
            {
              "lessThan": "6.19",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.19.*",
              "status": "unaffected",
              "version": "6.19.12",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.0",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.19.12",
                  "versionStartIncluding": "6.19",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.0",
                  "versionStartIncluding": "6.19",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\niio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only\n\nThe st_lsm6dsx_hwfifo_odr_store() function, which is called when userspace\nwrites the buffer sampling frequency sysfs attribute, calls\nst_lsm6dsx_check_odr(), which accesses the odr_table array at index\n`sensor-\u003eid`; since this array is only 2 entries long, an access for any\nsensor type other than accelerometer or gyroscope is an out-of-bounds\naccess.\n\nThe motivation for being able to set a buffer frequency different from the\nsensor sampling frequency is to support use cases that need accurate event\ndetection (which requires a high sampling frequency) while retrieving\nsensor data at low frequency. Since all the supported event types are\ngenerated from acceleration data only, do not create the buffer sampling\nfrequency attribute for sensor types other than the accelerometer."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-05-11T22:15:21.708Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/3225a81e8d264442b14c7c1bc965ebafa3c0ee01"
        },
        {
          "url": "https://git.kernel.org/stable/c/679c04c10d65d32a3f269e696b22912ff0a001b9"
        }
      ],
      "title": "iio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-31764",
    "datePublished": "2026-05-01T14:14:55.230Z",
    "dateReserved": "2026-03-09T15:48:24.139Z",
    "dateUpdated": "2026-05-11T22:15:21.708Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-31764",
      "date": "2026-11-18",
      "epss": "0.0012",
      "percentile": "0.01905"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "defaultStatus": "unaffected",
                "product": "Linux",
                "programFiles": [
                  "drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "lessThan": "3225a81e8d264442b14c7c1bc965ebafa3c0ee01",
                    "status": "affected",
                    "version": "6b648a36c200dfd3e776e657a4c8a8ce63fb52d3",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "679c04c10d65d32a3f269e696b22912ff0a001b9",
                    "status": "affected",
                    "version": "6b648a36c200dfd3e776e657a4c8a8ce63fb52d3",
                    "versionType": "git"
                  }
                ]
              },
              {
                "defaultStatus": "affected",
                "product": "Linux",
                "programFiles": [
                  "drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "status": "affected",
                    "version": "6.19"
                  },
                  {
                    "lessThan": "6.19",
                    "status": "unaffected",
                    "version": "0",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.19.*",
                    "status": "unaffected",
                    "version": "6.19.12",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "*",
                    "status": "unaffected",
                    "version": "7.0",
                    "versionType": "original_commit_for_fix"
                  }
                ]
              }
            ],
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
          }
        ],
        "configurations": [
          {
            "nodes": [
              {
                "cpeMatch": [
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "0A2B9540-02D5-41B4-B16A-82AF66FD4F36",
                    "versionEndExcluding": "6.19.12",
                    "versionStartIncluding": "6.19",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc1:*:*:*:*:*:*",
                    "matchCriteriaId": "F253B622-8837-4245-BCE5-A7BF8FC76A16",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc2:*:*:*:*:*:*",
                    "matchCriteriaId": "4AE85AD8-4641-4E7C-A2F4-305E2CD9EE64",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc3:*:*:*:*:*:*",
                    "matchCriteriaId": "F666C8D8-6538-46D4-B318-87610DE64C34",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc4:*:*:*:*:*:*",
                    "matchCriteriaId": "02259FDA-961B-47BC-AE7F-93D7EC6E90C2",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc5:*:*:*:*:*:*",
                    "matchCriteriaId": "58A9FEFF-C040-420D-8F0A-BFDAAA1DF258",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc6:*:*:*:*:*:*",
                    "matchCriteriaId": "1D2315C0-D46F-4F85-9754-F9E5E11374A6",
                    "vulnerable": true
                  }
                ],
                "negate": false,
                "operator": "OR"
              }
            ]
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "In the Linux kernel, the following vulnerability has been resolved:\n\niio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only\n\nThe st_lsm6dsx_hwfifo_odr_store() function, which is called when userspace\nwrites the buffer sampling frequency sysfs attribute, calls\nst_lsm6dsx_check_odr(), which accesses the odr_table array at index\n`sensor-\u003eid`; since this array is only 2 entries long, an access for any\nsensor type other than accelerometer or gyroscope is an out-of-bounds\naccess.\n\nThe motivation for being able to set a buffer frequency different from the\nsensor sampling frequency is to support use cases that need accurate event\ndetection (which requires a high sampling frequency) while retrieving\nsensor data at low frequency. Since all the supported event types are\ngenerated from acceleration data only, do not create the buffer sampling\nfrequency attribute for sensor types other than the accelerometer."
          },
          {
            "lang": "es",
            "value": "En el kernel de Linux, la siguiente vulnerabilidad ha sido resuelta:\n\niio: imu: st_lsm6dsx: Establecer la frecuencia de muestreo del b\u00fafer solo para el aceler\u00f3metro\n\nLa funci\u00f3n st_lsm6dsx_hwfifo_odr_store(), que se llama cuando el espacio de usuario (userspace) escribe el atributo sysfs de frecuencia de muestreo del b\u00fafer, llama a st_lsm6dsx_check_odr(), que accede al array odr_table en el \u00edndice \u2019sensor  -\u003e  id\u2019; dado que este array tiene solo 2 entradas de longitud, un acceso para cualquier tipo de sensor que no sea aceler\u00f3metro o giroscopio es un acceso fuera de l\u00edmites.\n\nLa motivaci\u00f3n para poder establecer una frecuencia de b\u00fafer diferente de la frecuencia de muestreo del sensor es para soportar casos de uso que necesitan detecci\u00f3n precisa de eventos (lo que requiere una alta frecuencia de muestreo) mientras se recuperan datos del sensor a baja frecuencia. Dado que todos los tipos de eventos soportados se generan solo a partir de datos de aceleraci\u00f3n, no cree el atributo de frecuencia de muestreo del b\u00fafer para tipos de sensor que no sean el aceler\u00f3metro."
          }
        ],
        "id": "CVE-2026-31764",
        "lastModified": "2026-11-11T21:10:00.200",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "LOW",
                "attackVector": "LOCAL",
                "availabilityImpact": "HIGH",
                "baseScore": 7.8,
                "baseSeverity": "HIGH",
                "confidentialityImpact": "HIGH",
                "integrityImpact": "HIGH",
                "privilegesRequired": "LOW",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
                "version": "3.1"
              },
              "exploitabilityScore": 1.8,
              "impactScore": 5.9,
              "source": "nvd@nist.gov",
              "type": "Primary"
            }
          ]
        },
        "published": "2026-05-01T15:16:39.523",
        "references": [
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/3225a81e8d264442b14c7c1bc965ebafa3c0ee01"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/679c04c10d65d32a3f269e696b22912ff0a001b9"
          }
        ],
        "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "vulnStatus": "Analyzed",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "CWE-129"
              }
            ],
            "source": "nvd@nist.gov",
            "type": "Primary"
          }
        ]
      }
    },
    "redhat_vex": {
      "aggregate_severity": "None",
      "current_release_date": "2026-11-07T04:37:51+00:00",
      "cve": "CVE-2026-31764",
      "id": "CVE-2026-31764",
      "initial_release_date": "2026-05-01T00:00:00+00:00",
      "product_status:known_not_affected": "200",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: iio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-31764.json",
      "version": "3"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.