Search
Find a vulnerability
Search criteria
12 vulnerabilities found for scalance_wub762-1_firmware by siemens
FKIE_CVE-2024-5535
Vulnerability from fkie_nvd - Published: 2024-06-27 11:15 - Updated: 2026-11-10 14:31
Severity
Summary
Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an
empty supported client protocols buffer may cause a crash or memory contents to
be sent to the peer.
Impact summary: A buffer overread can have a range of potential consequences
such as unexpected application beahviour or a crash. In particular this issue
could result in up to 255 bytes of arbitrary private data from memory being sent
to the peer leading to a loss of confidentiality. However, only applications
that directly call the SSL_select_next_proto function with a 0 length list of
supported client protocols are affected by this issue. This would normally never
be a valid scenario and is typically not under attacker control but may occur by
accident in the case of a configuration or programming error in the calling
application.
The OpenSSL API function SSL_select_next_proto is typically used by TLS
applications that support ALPN (Application Layer Protocol Negotiation) or NPN
(Next Protocol Negotiation). NPN is older, was never standardised and
is deprecated in favour of ALPN. We believe that ALPN is significantly more
widely deployed than NPN. The SSL_select_next_proto function accepts a list of
protocols from the server and a list of protocols from the client and returns
the first protocol that appears in the server list that also appears in the
client list. In the case of no overlap between the two lists it returns the
first item in the client list. In either case it will signal whether an overlap
between the two lists was found. In the case where SSL_select_next_proto is
called with a zero length client list it fails to notice this condition and
returns the memory immediately following the client list pointer (and reports
that there was no overlap in the lists).
This function is typically called from a server side application callback for
ALPN or a client side application callback for NPN. In the case of ALPN the list
of protocols supplied by the client is guaranteed by libssl to never be zero in
length. The list of server protocols comes from the application and should never
normally be expected to be of zero length. In this case if the
SSL_select_next_proto function has been called as expected (with the list
supplied by the client passed in the client/client_len parameters), then the
application will not be vulnerable to this issue. If the application has
accidentally been configured with a zero length server list, and has
accidentally passed that zero length server list in the client/client_len
parameters, and has additionally failed to correctly handle a "no overlap"
response (which would normally result in a handshake failure in ALPN) then it
will be vulnerable to this problem.
In the case of NPN, the protocol permits the client to opportunistically select
a protocol when there is no overlap. OpenSSL returns the first client protocol
in the no overlap case in support of this. The list of client protocols comes
from the application and should never normally be expected to be of zero length.
However if the SSL_select_next_proto function is accidentally called with a
client_len of 0 then an invalid memory pointer will be returned instead. If the
application uses this output as the opportunistic protocol then the loss of
confidentiality will occur.
This issue has been assessed as Low severity because applications are most
likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not
widely used. It also requires an application configuration or programming error.
Finally, this issue would not typically be under attacker control making active
exploitation unlikely.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.
Due to the low severity of this issue we are not issuing new releases of
OpenSSL at this time. The fix will be included in the next releases when they
become available.
References
Impacted products
{
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "OpenSSL",
"vendor": "OpenSSL",
"versions": [
{
"lessThan": "3.3.2",
"status": "affected",
"version": "3.3.0",
"versionType": "semver"
},
{
"lessThan": "3.2.3",
"status": "affected",
"version": "3.2.0",
"versionType": "semver"
},
{
"lessThan": "3.1.7",
"status": "affected",
"version": "3.1.0",
"versionType": "semver"
},
{
"lessThan": "3.0.15",
"status": "affected",
"version": "3.0.0",
"versionType": "semver"
},
{
"lessThan": "1.1.1za",
"status": "affected",
"version": "1.1.1",
"versionType": "custom"
},
{
"lessThan": "1.0.2zk",
"status": "affected",
"version": "1.0.2",
"versionType": "custom"
}
]
}
],
"source": "openssl-security@openssl.org"
},
{
"affectedData": [
{
"cpes": [
"cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*"
],
"defaultStatus": "unknown",
"product": "openssl",
"vendor": "openssl",
"versions": [
{
"lessThan": "3.3.2",
"status": "affected",
"version": "3.3.0",
"versionType": "custom"
},
{
"lessThan": "3.2.3",
"status": "affected",
"version": "3.2.0",
"versionType": "custom"
},
{
"lessThan": "3.1.7",
"status": "affected",
"version": "3.1.0",
"versionType": "custom"
},
{
"lessThan": "3.0.15",
"status": "affected",
"version": "3.0.0",
"versionType": "custom"
},
{
"lessThan": "1.1.1za",
"status": "affected",
"version": "1.1.1",
"versionType": "custom"
},
{
"lessThan": "1.0.2zk",
"status": "affected",
"version": "1.0.2",
"versionType": "custom"
}
]
}
],
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0"
},
{
"affectedData": [
{
"defaultStatus": "unknown",
"product": "RUGGEDCOM RST2428P",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 family",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE XCM-/XRM-/XCH-/XRH-300 family",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIDIS Prime",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.0.700",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V1.1.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
}
],
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e"
}
],
"configurations": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "39688E5E-E5F9-4327-A6C0-8F6C2DE3D7DB",
"versionEndExcluding": "1.0.2zk",
"versionStartIncluding": "1.0.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "F45CEA93-637F-4F55-A948-82E8C98C4BBC",
"versionEndExcluding": "1.1.1za",
"versionStartIncluding": "1.1.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "F6B2B529-0ABC-49F4-BD03-380F291A84D4",
"versionEndExcluding": "3.0.15",
"versionStartIncluding": "3.0.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "30CD2859-B247-4957-A511-0FE284AA4A3A",
"versionEndExcluding": "3.1.7",
"versionStartIncluding": "3.1.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "B822EA84-566B-44F2-9485-8A97103249D5",
"versionEndExcluding": "3.2.3",
"versionStartIncluding": "3.2.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "37FD7956-A868-459B-90EA-C0D2DCF63AFC",
"versionEndExcluding": "3.3.2",
"versionStartIncluding": "3.3.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:debian:debian_linux:11.0:*:*:*:*:*:*:*",
"matchCriteriaId": "FA6FEEC2-9F11-4643-8827-749718254FED",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:netapp:active_iq_unified_manager:-:*:*:*:*:linux:*:*",
"matchCriteriaId": "F3E0B672-3E06-4422-B2A4-0BD073AEC2A1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:active_iq_unified_manager:-:*:*:*:*:vmware_vsphere:*:*",
"matchCriteriaId": "3A756737-1CC4-42C2-A4DF-E1C893B4E2D5",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:active_iq_unified_manager:-:*:*:*:*:windows:*:*",
"matchCriteriaId": "B55E8D50-99B4-47EC-86F9-699B67D473CE",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:management_services_for_element_software_and_netapp_hci:-:*:*:*:*:*:*:*",
"matchCriteriaId": "FDAC85F0-93AF-4BE3-AE1A-8ADAF1CDF9AB",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:oncommand_insight:-:*:*:*:*:*:*:*",
"matchCriteriaId": "F1BE6C1F-2565-4E97-92AA-16563E5660A5",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:oncommand_workflow_automation:-:*:*:*:*:*:*:*",
"matchCriteriaId": "5735E553-9731-4AAC-BCFF-989377F817B3",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:ontap_select_deploy_administration_utility:-:*:*:*:*:*:*:*",
"matchCriteriaId": "E7CF3019-975D-40BB-A8A4-894E62BD3797",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:ontap_tools:-:*:*:*:*:vmware_vsphere:*:*",
"matchCriteriaId": "CBCC384C-5DF0-41AB-B17B-6E9B6CAE8065",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:snapcenter:*:*:*:*:*:*:*:*",
"matchCriteriaId": "A83926B4-7CB8-4F96-B084-FEBBD39ED258",
"versionEndExcluding": "6.0.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:snapmanager:-:*:*:*:*:hyper-v:*:*",
"matchCriteriaId": "80774A35-B0B8-4F9C-99CA-23849978D158",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:bootstrap_os:-:*:*:*:*:*:*:*",
"matchCriteriaId": "95BA156C-C977-4F0C-8DFB-3FAE9CC8C02D",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:hci_compute_node:-:*:*:*:*:*:*:*",
"matchCriteriaId": "AD7447BC-F315-4298-A822-549942FC118B",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:a250_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "1236B66D-EB11-4324-929F-E2B86683C3C7",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:a250:-:*:*:*:*:*:*:*",
"matchCriteriaId": "281DFC67-46BB-4FC2-BE03-3C65C9311F65",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:500f_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "ECF32BB1-9A58-4821-AE49-5D5C8200631F",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:500f:-:*:*:*:*:*:*:*",
"matchCriteriaId": "F21DE67F-CDFD-4D36-9967-633CD0240C6F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:c250_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "F1AB1EC2-2560-494A-A51B-6F20CE318FEB",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:c250:-:*:*:*:*:*:*:*",
"matchCriteriaId": "58DE2B52-4E49-4CD0-9310-00291B0352C7",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h300s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "6770B6C3-732E-4E22-BF1C-2D2FD610061C",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h300s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "9F9C8C20-42EB-4AB5-BD97-212DEB070C43",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h500s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "7FFF7106-ED78-49BA-9EC5-B889E3685D53",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h500s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "E63D8B0F-006E-4801-BF9D-1C001BBFB4F9",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h700s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "56409CEC-5A1E-4450-AA42-641E459CC2AF",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h700s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "B06F4839-D16A-4A61-9BB5-55B13F41E47F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h410s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "D0B4AD8A-F172-4558-AEC6-FF424BA2D912",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h410s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "8497A4C9-8474-4A62-8331-3FE862ED4098",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h410c_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "234DEFE0-5CE5-4B0A-96B8-5D227CB8ED31",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h410c:-:*:*:*:*:*:*:*",
"matchCriteriaId": "CDDF61B7-EC5C-467C-B710-B89F502CD04F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h610c_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "89612649-BACF-4FAC-9BA4-324724FD93A6",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h610c:-:*:*:*:*:*:*:*",
"matchCriteriaId": "F3D9B255-C1AF-42D1-BF9B-13642FBDC080",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h610s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "FD7CFE0E-9D1E-4495-B302-89C3096FC0DF",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h610s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "F63A3FA7-AAED-4A9D-9FDE-6195302DA0F6",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h615c_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "5921A877-18BF-43FE-915C-D226E140ACFC",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h615c:-:*:*:*:*:*:*:*",
"matchCriteriaId": "7296A1F2-D315-4FD5-8A73-65C480C855BE",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:simatic_s7-1500_tm_mfp_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "54DEC927-C2D3-45C0-B8F3-03C1E97B2A72",
"versionEndExcluding": "1.1.1",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:simatic_s7-1500_tm_mfp:-:*:*:*:*:*:*:*",
"matchCriteriaId": "754051AB-27D3-41CA-B2C8-79BAD48C8750",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:siemens:sidis_prime:*:*:*:*:*:*:*:*",
"matchCriteriaId": "809D6A07-28BE-476D-A83E-582E626EA348",
"versionEndExcluding": "4.0.700",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:simatic_s7-1500_cpu_1518-4_pn\\/dp_mfp_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "DF6BB9FE-532C-4F75-9C81-89DB990EA137",
"versionEndExcluding": "3.1.5",
"versionStartIncluding": "3.1.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:simatic_s7-1500_cpu_1518-4_pn\\/dp_mfp:-:*:*:*:*:*:*:*",
"matchCriteriaId": "3BC4FA01-8DDB-41E4-B759-7B504F78AEBC",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wab762-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "E99C9E5C-D4D6-45D8-BB2F-AE8BEACC85F7",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wab762-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "C41E4D9E-23E6-449F-BE45-BB44C1F460D2",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wam763-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "7D7E9EC0-A564-4AD4-952C-2D8FDF462962",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wam763-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "1AAE316D-6BA6-4C3F-9EE1-E23E4CB6FD19",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wam766-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "377FD457-974D-49D2-810D-0E8C42B218BA",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wam766-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "AA96B540-439B-4A1A-9D7D-C45AEFBC7BE6",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wub762-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "D0E71F48-068F-4AE6-84C0-246F356561BD",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wub762-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "12F84DA5-E569-4019-A763-0A847A940F21",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wub762-1_ifeatures_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "8A679822-8E5E-489D-B8E6-B86F81BA01C3",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wub762-1_ifeatures:-:*:*:*:*:*:*:*",
"matchCriteriaId": "9720D013-10D4-46F6-A235-5641C39F2134",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wum763-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "69CBE039-BDDD-4415-9951-C5F7DF120E89",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wum763-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "C501445F-BDF6-4A0A-85FD-E6BFBF0A3C6F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wum766-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "B6F8A6B3-58C8-48A7-A432-CF762A39FF38",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wum766-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "4EB15599-F795-4D24-A4A6-CD826F6A7A13",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:siemens:sinec_ins:*:*:*:*:*:*:*:*",
"matchCriteriaId": "C89891C1-DFD7-4E1F-80A9-7485D86A15B5",
"versionEndExcluding": "1.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:siemens:sinec_ins:1.0:-:*:*:*:*:*:*",
"matchCriteriaId": "4664B195-AF14-4834-82B3-0B2C98020EB6",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:siemens:sinec_ins:1.0:sp1:*:*:*:*:*:*",
"matchCriteriaId": "75BC588E-CDF0-404E-AD61-02093A1DF343",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:siemens:sinec_ins:1.0:sp2:*:*:*:*:*:*",
"matchCriteriaId": "A334F7B4-7283-4453-BAED-D2E01B7F8A6E",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:siemens:sinec_ins:1.0:sp2_update_1:*:*:*:*:*:*",
"matchCriteriaId": "A6BEA71C-CA81-4B5D-A688-2B21E62DC351",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:siemens:sinec_ins:1.0:sp2_update_2:*:*:*:*:*:*",
"matchCriteriaId": "6B405F22-5517-49F5-A7CA-1E50D58DFC75",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:sinec_os:*:*:*:*:*:*:*:*",
"matchCriteriaId": "3D5BAE57-7846-4EDC-B2F7-172B52792821",
"versionEndExcluding": "3.1",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:ruggedcom_rst2428p:-:*:*:*:*:*:*:*",
"matchCriteriaId": "5162CF70-42A4-4CBD-BE7E-17526719138A",
"vulnerable": false
},
{
"criteria": "cpe:2.3:h:siemens:scalance_xch328:-:*:*:*:*:*:*:*",
"matchCriteriaId": "782C249B-9E3A-4434-85D6-1F69A038D829",
"vulnerable": false
},
{
"criteria": "cpe:2.3:h:siemens:scalance_xcm324:-:*:*:*:*:*:*:*",
"matchCriteriaId": "136D0CA3-725F-4D2F-9CC8-50900A6B34C8",
"vulnerable": false
},
{
"criteria": "cpe:2.3:h:siemens:scalance_xcm328:-:*:*:*:*:*:*:*",
"matchCriteriaId": "C2EC8600-BA60-4924-B884-AFAA2479148F",
"vulnerable": false
},
{
"criteria": "cpe:2.3:h:siemens:scalance_xcm332:-:*:*:*:*:*:*:*",
"matchCriteriaId": "05A09417-83A6-42AC-A89E-DEFDC942DA39",
"vulnerable": false
},
{
"criteria": "cpe:2.3:h:siemens:scalance_xrh334:-:*:*:*:*:*:*:*",
"matchCriteriaId": "06FA1667-965A-4119-A519-F9119B5358DF",
"vulnerable": false
},
{
"criteria": "cpe:2.3:h:siemens:scalance_xrm334:-:*:*:*:*:*:*:*",
"matchCriteriaId": "C5FC3042-0224-45AE-B516-7934EF15DCC8",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:simatic_s7-1500_cpu_1518f-4_pn\\/dp_mfp_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "C1DF837E-6F54-4214-B3D6-BDCD4A686031",
"versionEndExcluding": "3.1.5",
"versionStartIncluding": "3.1.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:simatic_s7-1500_cpu_1518f-4_pn\\/dp_mfp:-:*:*:*:*:*:*:*",
"matchCriteriaId": "5B1EE93D-BAD2-4B86-910C-8784FCC9F398",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:siplus_s7-1500_cpu_1518-4_pn\\/dp_mfp_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "CA0C08CF-92E1-475D-991B-477D194A0A00",
"versionEndExcluding": "3.1.5",
"versionStartIncluding": "3.1.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:siplus_s7-1500_cpu_1518-4_pn\\/dp_mfp:-:*:*:*:*:*:*:*",
"matchCriteriaId": "E2F63E0A-126D-4A93-8159-45EB5E606F81",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an\nempty supported client protocols buffer may cause a crash or memory contents to\nbe sent to the peer.\n\nImpact summary: A buffer overread can have a range of potential consequences\nsuch as unexpected application beahviour or a crash. In particular this issue\ncould result in up to 255 bytes of arbitrary private data from memory being sent\nto the peer leading to a loss of confidentiality. However, only applications\nthat directly call the SSL_select_next_proto function with a 0 length list of\nsupported client protocols are affected by this issue. This would normally never\nbe a valid scenario and is typically not under attacker control but may occur by\naccident in the case of a configuration or programming error in the calling\napplication.\n\nThe OpenSSL API function SSL_select_next_proto is typically used by TLS\napplications that support ALPN (Application Layer Protocol Negotiation) or NPN\n(Next Protocol Negotiation). NPN is older, was never standardised and\nis deprecated in favour of ALPN. We believe that ALPN is significantly more\nwidely deployed than NPN. The SSL_select_next_proto function accepts a list of\nprotocols from the server and a list of protocols from the client and returns\nthe first protocol that appears in the server list that also appears in the\nclient list. In the case of no overlap between the two lists it returns the\nfirst item in the client list. In either case it will signal whether an overlap\nbetween the two lists was found. In the case where SSL_select_next_proto is\ncalled with a zero length client list it fails to notice this condition and\nreturns the memory immediately following the client list pointer (and reports\nthat there was no overlap in the lists).\n\nThis function is typically called from a server side application callback for\nALPN or a client side application callback for NPN. In the case of ALPN the list\nof protocols supplied by the client is guaranteed by libssl to never be zero in\nlength. The list of server protocols comes from the application and should never\nnormally be expected to be of zero length. In this case if the\nSSL_select_next_proto function has been called as expected (with the list\nsupplied by the client passed in the client/client_len parameters), then the\napplication will not be vulnerable to this issue. If the application has\naccidentally been configured with a zero length server list, and has\naccidentally passed that zero length server list in the client/client_len\nparameters, and has additionally failed to correctly handle a \"no overlap\"\nresponse (which would normally result in a handshake failure in ALPN) then it\nwill be vulnerable to this problem.\n\nIn the case of NPN, the protocol permits the client to opportunistically select\na protocol when there is no overlap. OpenSSL returns the first client protocol\nin the no overlap case in support of this. The list of client protocols comes\nfrom the application and should never normally be expected to be of zero length.\nHowever if the SSL_select_next_proto function is accidentally called with a\nclient_len of 0 then an invalid memory pointer will be returned instead. If the\napplication uses this output as the opportunistic protocol then the loss of\nconfidentiality will occur.\n\nThis issue has been assessed as Low severity because applications are most\nlikely to be vulnerable if they are using NPN instead of ALPN - but NPN is not\nwidely used. It also requires an application configuration or programming error.\nFinally, this issue would not typically be under attacker control making active\nexploitation unlikely.\n\nThe FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.\n\nDue to the low severity of this issue we are not issuing new releases of\nOpenSSL at this time. The fix will be included in the next releases when they\nbecome available."
},
{
"lang": "es",
"value": "Resumen del problema: llamar a la funci\u00f3n API de OpenSSL SSL_select_next_proto con un b\u00fafer de protocolos de cliente compatible vac\u00edo puede provocar una falla o que se env\u00ede contenido de la memoria al igual. Resumen de impacto: una lectura excesiva del b\u00fafer puede tener una variedad de consecuencias potenciales, como un comportamiento inesperado de la aplicaci\u00f3n o un bloqueo. En particular, este problema podr\u00eda provocar que se env\u00eden hasta 255 bytes de datos privados arbitrarios de la memoria al par, lo que provocar\u00eda una p\u00e9rdida de confidencialidad. Sin embargo, este problema solo afecta a las aplicaciones que llaman directamente a la funci\u00f3n SSL_select_next_proto con una lista de longitud 0 de protocolos de cliente compatibles. Normalmente, esto nunca ser\u00eda un escenario v\u00e1lido y normalmente no est\u00e1 bajo el control de un atacante, pero puede ocurrir por accidente en el caso de un error de configuraci\u00f3n o programaci\u00f3n en la aplicaci\u00f3n que realiza la llamada. La funci\u00f3n API de OpenSSL SSL_select_next_proto suele ser utilizada por aplicaciones TLS que admiten ALPN (negociaci\u00f3n de protocolo de capa de aplicaci\u00f3n) o NPN (negociaci\u00f3n de siguiente protocolo). NPN es m\u00e1s antiguo, nunca se estandariz\u00f3 y est\u00e1 en desuso en favor de ALPN. Creemos que ALPN est\u00e1 mucho m\u00e1s implementado que NPN. La funci\u00f3n SSL_select_next_proto acepta una lista de protocolos del servidor y una lista de protocolos del cliente y devuelve el primer protocolo que aparece en la lista de servidores que tambi\u00e9n aparece en la lista de clientes. En caso de que no haya superposici\u00f3n entre las dos listas, devuelve el primer elemento de la lista de clientes. En cualquier caso, indicar\u00e1 si se encontr\u00f3 una superposici\u00f3n entre las dos listas. En el caso de que se llame a SSL_select_next_proto con una lista de clientes de longitud cero, no detecta esta condici\u00f3n y devuelve la memoria inmediatamente despu\u00e9s del puntero de la lista de clientes (e informa que no hubo superposici\u00f3n en las listas). Esta funci\u00f3n normalmente se llama desde una devoluci\u00f3n de llamada de la aplicaci\u00f3n del lado del servidor para ALPN o una devoluci\u00f3n de llamada de la aplicaci\u00f3n del lado del cliente para NPN. En el caso de ALPN, libssl garantiza que la lista de protocolos proporcionados por el cliente nunca tendr\u00e1 una longitud cero. La lista de protocolos del servidor proviene de la aplicaci\u00f3n y normalmente nunca se debe esperar que tenga una longitud cero. En este caso, si la funci\u00f3n SSL_select_next_proto se llam\u00f3 como se esperaba (con la lista proporcionada por el cliente pasada en los par\u00e1metros client/client_len), entonces la aplicaci\u00f3n no ser\u00e1 vulnerable a este problema. Si la aplicaci\u00f3n se configur\u00f3 accidentalmente con una lista de servidores de longitud cero y accidentalmente pas\u00f3 esa lista de servidores de longitud cero en los par\u00e1metros client/client_len y adem\u00e1s no pudo manejar correctamente una respuesta \"sin superposici\u00f3n\" (que normalmente dar\u00eda como resultado una falla en el protocolo de enlace en ALPN) entonces ser\u00e1 vulnerable a este problema. En el caso de NPN, el protocolo permite al cliente seleccionar de manera oportunista un protocolo cuando no hay superposici\u00f3n. OpenSSL devuelve el primer protocolo de cliente en el caso de que no haya superposici\u00f3n para respaldar esto. La lista de protocolos de cliente proviene de la aplicaci\u00f3n y normalmente nunca se debe esperar que tenga una longitud cero. Sin embargo, si la funci\u00f3n SSL_select_next_proto se llama accidentalmente con un client_len de 0, se devolver\u00e1 un puntero de memoria no v\u00e1lido. Si la aplicaci\u00f3n utiliza esta salida como protocolo oportunista, se producir\u00e1 la p\u00e9rdida de confidencialidad. Este problema se ha evaluado como de gravedad baja porque es m\u00e1s probable que las aplicaciones sean vulnerables si utilizan NPN en lugar de ALPN, pero NPN no se utiliza ampliamente. Tambi\u00e9n requiere una configuraci\u00f3n de la aplicaci\u00f3n o un error de programaci\u00f3n.-- truncada---"
}
],
"id": "CVE-2024-5535",
"lastModified": "2026-11-10T14:31:44.263",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 9.1,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "HIGH",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H",
"version": "3.1"
},
"exploitabilityScore": 3.9,
"impactScore": 5.2,
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"type": "Secondary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2024-5535",
"options": [
{
"exploitation": "none"
},
{
"automatable": "yes"
},
{
"technicalImpact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-11-08T00:00:00+00:00",
"version": "2.0.3"
}
}
]
},
"published": "2024-06-27T11:15:24.447",
"references": [
{
"source": "openssl-security@openssl.org",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/4ada436a1946cbb24db5ab4ca082b69c1bc10f37"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/99fb785a5f85315b95288921a321a935ea29a51e"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/cf6f91f6121f4db167405db2f0de410a456f260c"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/e86ac436f0bd54d4517745483e2315650fae7b2c"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Permissions Required"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/9947251413065a05189a63c9b7a6c1d4e224c21c"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Permissions Required"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/b78ec0824da857223486660177d3b1f255c65d87"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Vendor Advisory"
],
"url": "https://www.openssl.org/news/secadv/20240627.txt"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Mailing List",
"Third Party Advisory"
],
"url": "http://www.openwall.com/lists/oss-security/2024/06/27/1"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Mailing List",
"Third Party Advisory"
],
"url": "http://www.openwall.com/lists/oss-security/2024/06/28/4"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Mailing List",
"Third Party Advisory"
],
"url": "http://www.openwall.com/lists/oss-security/2024/08/15/1"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/4ada436a1946cbb24db5ab4ca082b69c1bc10f37"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/99fb785a5f85315b95288921a321a935ea29a51e"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/cf6f91f6121f4db167405db2f0de410a456f260c"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/e86ac436f0bd54d4517745483e2315650fae7b2c"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Permissions Required"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/9947251413065a05189a63c9b7a6c1d4e224c21c"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Permissions Required"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/b78ec0824da857223486660177d3b1f255c65d87"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Mailing List",
"Third Party Advisory"
],
"url": "https://lists.debian.org/debian-lts-announce/2024/10/msg00033.html"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Mailing List",
"Third Party Advisory"
],
"url": "https://lists.debian.org/debian-lts-announce/2024/11/msg00000.html"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Third Party Advisory"
],
"url": "https://security.netapp.com/advisory/ntap-20240712-0005/"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Third Party Advisory"
],
"url": "https://security.netapp.com/advisory/ntap-20241025-0006/"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Third Party Advisory"
],
"url": "https://security.netapp.com/advisory/ntap-20241025-0010/"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Vendor Advisory"
],
"url": "https://www.openssl.org/news/secadv/20240627.txt"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-265688.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-277137.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-398330.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-613116.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-769027.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-915275.html"
}
],
"sourceIdentifier": "openssl-security@openssl.org",
"vulnStatus": "Analyzed",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-125"
}
],
"source": "openssl-security@openssl.org",
"type": "Secondary"
}
]
}
FKIE_CVE-2023-6237
Vulnerability from fkie_nvd - Published: 2024-04-25 07:15 - Updated: 2026-11-10 14:05
Severity
Summary
Issue summary: Checking excessively long invalid RSA public keys may take
a long time.
Impact summary: Applications that use the function EVP_PKEY_public_check()
to check RSA public keys may experience long delays. Where the key that
is being checked has been obtained from an untrusted source this may lead
to a Denial of Service.
When function EVP_PKEY_public_check() is called on RSA public keys,
a computation is done to confirm that the RSA modulus, n, is composite.
For valid RSA keys, n is a product of two or more large primes and this
computation completes quickly. However, if n is an overly large prime,
then this computation would take a long time.
An application that calls EVP_PKEY_public_check() and supplies an RSA key
obtained from an untrusted source could be vulnerable to a Denial of Service
attack.
The function EVP_PKEY_public_check() is not called from other OpenSSL
functions however it is called from the OpenSSL pkey command line
application. For that reason that application is also vulnerable if used
with the '-pubin' and '-check' options on untrusted data.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.
References
Impacted products
{
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "OpenSSL",
"vendor": "OpenSSL",
"versions": [
{
"lessThan": "3.0.13",
"status": "affected",
"version": "3.0.0",
"versionType": "semver"
},
{
"lessThan": "3.1.5",
"status": "affected",
"version": "3.1.0",
"versionType": "semver"
},
{
"lessThan": "3.2.1",
"status": "affected",
"version": "3.2.0",
"versionType": "semver"
}
]
}
],
"source": "openssl-security@openssl.org"
},
{
"affectedData": [
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V1.1.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINEC NMS",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.0 SP1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
}
],
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e"
}
],
"configurations": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "21346C7C-ED3A-43D4-BBCB-41D62F7ACBF2",
"versionEndExcluding": "3.0.13",
"versionStartIncluding": "3.0.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "AAD34F57-90D2-415F-9544-70B594D04E53",
"versionEndExcluding": "3.1.5",
"versionStartIncluding": "3.1.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "78581B16-BCE6-4AC5-A448-22C0615DD8C2",
"versionEndExcluding": "3.2.1",
"versionStartIncluding": "3.2.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:netapp:management_services_for_element_software_and_netapp_hci:-:*:*:*:*:*:*:*",
"matchCriteriaId": "FDAC85F0-93AF-4BE3-AE1A-8ADAF1CDF9AB",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:ontap_select_deploy_administration_utility:-:*:*:*:*:*:*:*",
"matchCriteriaId": "E7CF3019-975D-40BB-A8A4-894E62BD3797",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:snapmanager:-:*:*:*:*:hyper-v:*:*",
"matchCriteriaId": "80774A35-B0B8-4F9C-99CA-23849978D158",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:netapp:brocade_fabric_operating_system:-:*:*:*:*:*:*:*",
"matchCriteriaId": "A2119FFC-08F9-4C3F-881C-9C72916BC652",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:hci_bootstrap_os:-:*:*:*:*:*:*:*",
"matchCriteriaId": "1C767AA1-88B7-48F0-9F31-A89D16DCD52C",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:hci_compute_node:-:*:*:*:*:*:*:*",
"matchCriteriaId": "AD7447BC-F315-4298-A822-549942FC118B",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:netapp:e-series_santricity_os_controller:*:*:*:*:*:*:*:*",
"matchCriteriaId": "472976F9-7258-4779-B974-35117F8D4106",
"versionEndExcluding": "11.80.1r2",
"versionStartIncluding": "11.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h610s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "FD7CFE0E-9D1E-4495-B302-89C3096FC0DF",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h610s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "F63A3FA7-AAED-4A9D-9FDE-6195302DA0F6",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h610c_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "89612649-BACF-4FAC-9BA4-324724FD93A6",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h610c:-:*:*:*:*:*:*:*",
"matchCriteriaId": "F3D9B255-C1AF-42D1-BF9B-13642FBDC080",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h410c_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "234DEFE0-5CE5-4B0A-96B8-5D227CB8ED31",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h410c:-:*:*:*:*:*:*:*",
"matchCriteriaId": "CDDF61B7-EC5C-467C-B710-B89F502CD04F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h410s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "D0B4AD8A-F172-4558-AEC6-FF424BA2D912",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h410s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "8497A4C9-8474-4A62-8331-3FE862ED4098",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h700s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "56409CEC-5A1E-4450-AA42-641E459CC2AF",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h700s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "B06F4839-D16A-4A61-9BB5-55B13F41E47F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h500s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "7FFF7106-ED78-49BA-9EC5-B889E3685D53",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h500s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "E63D8B0F-006E-4801-BF9D-1C001BBFB4F9",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h300s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "6770B6C3-732E-4E22-BF1C-2D2FD610061C",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h300s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "9F9C8C20-42EB-4AB5-BD97-212DEB070C43",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:c250_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "F1AB1EC2-2560-494A-A51B-6F20CE318FEB",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:c250:-:*:*:*:*:*:*:*",
"matchCriteriaId": "58DE2B52-4E49-4CD0-9310-00291B0352C7",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:500f_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "ECF32BB1-9A58-4821-AE49-5D5C8200631F",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:500f:-:*:*:*:*:*:*:*",
"matchCriteriaId": "F21DE67F-CDFD-4D36-9967-633CD0240C6F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:a250_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "1236B66D-EB11-4324-929F-E2B86683C3C7",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:a250:-:*:*:*:*:*:*:*",
"matchCriteriaId": "281DFC67-46BB-4FC2-BE03-3C65C9311F65",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:c400_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "9AC7AD92-8B33-4137-A4EC-08641E4AF857",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:c400:-:*:*:*:*:*:*:*",
"matchCriteriaId": "AD443748-B0D1-4C1A-A62E-BD5FB5967370",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:a400_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "04E3BD77-8915-4FFC-8483-5DB5D610F829",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:a400:-:*:*:*:*:*:*:*",
"matchCriteriaId": "97E94ECB-BB51-4364-BEDD-8648C193196F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:8700_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "34B25BEF-8708-4E2C-8BA6-EBCD5267EB04",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:8700:-:*:*:*:*:*:*:*",
"matchCriteriaId": "CE0F11D2-B5D9-46B4-BFC5-C86BC87D516A",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:8300_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "4E73901F-666D-4D8B-BDFD-93DD2F70C74B",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:8300:-:*:*:*:*:*:*:*",
"matchCriteriaId": "D0FD5AED-42CF-4918-B32C-D675738EF15C",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:a700s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "FDD92BFA-9117-4E6E-A13F-ED064B4B7284",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:a700s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "4B7DA42F-5D64-4967-A2D4-6210FE507841",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:simatic_s7-1500_tm_mfp_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "54DEC927-C2D3-45C0-B8F3-03C1E97B2A72",
"versionEndExcluding": "1.1.1",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:simatic_s7-1500_tm_mfp:-:*:*:*:*:*:*:*",
"matchCriteriaId": "754051AB-27D3-41CA-B2C8-79BAD48C8750",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:siemens:sinec_nms:*:*:*:*:*:*:*:*",
"matchCriteriaId": "C55F7410-29E3-423F-BFDE-97A0A996FA75",
"versionEndIncluding": "2.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:siemens:sinec_nms:3.0:-:*:*:*:*:*:*",
"matchCriteriaId": "F9DFB8E7-F902-44FA-BA35-B11C4BA95336",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wum766-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "B6F8A6B3-58C8-48A7-A432-CF762A39FF38",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wum766-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "4EB15599-F795-4D24-A4A6-CD826F6A7A13",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wum763-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "69CBE039-BDDD-4415-9951-C5F7DF120E89",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wum763-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "C501445F-BDF6-4A0A-85FD-E6BFBF0A3C6F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wub762-1_ifeatures_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "8A679822-8E5E-489D-B8E6-B86F81BA01C3",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wub762-1_ifeatures:-:*:*:*:*:*:*:*",
"matchCriteriaId": "9720D013-10D4-46F6-A235-5641C39F2134",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wub762-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "D0E71F48-068F-4AE6-84C0-246F356561BD",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wub762-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "12F84DA5-E569-4019-A763-0A847A940F21",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wam766-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "377FD457-974D-49D2-810D-0E8C42B218BA",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wam766-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "AA96B540-439B-4A1A-9D7D-C45AEFBC7BE6",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wam763-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "7D7E9EC0-A564-4AD4-952C-2D8FDF462962",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wam763-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "1AAE316D-6BA6-4C3F-9EE1-E23E4CB6FD19",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wab762-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "E99C9E5C-D4D6-45D8-BB2F-AE8BEACC85F7",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wab762-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "C41E4D9E-23E6-449F-BE45-BB44C1F460D2",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:siemens:sinec_ins:*:*:*:*:*:*:*:*",
"matchCriteriaId": "C89891C1-DFD7-4E1F-80A9-7485D86A15B5",
"versionEndExcluding": "1.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:siemens:sinec_ins:1.0:-:*:*:*:*:*:*",
"matchCriteriaId": "4664B195-AF14-4834-82B3-0B2C98020EB6",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:siemens:sinec_ins:1.0:sp1:*:*:*:*:*:*",
"matchCriteriaId": "75BC588E-CDF0-404E-AD61-02093A1DF343",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:siemens:sinec_ins:1.0:sp2:*:*:*:*:*:*",
"matchCriteriaId": "A334F7B4-7283-4453-BAED-D2E01B7F8A6E",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:siemens:sinec_ins:1.0:sp2_update_1:*:*:*:*:*:*",
"matchCriteriaId": "A6BEA71C-CA81-4B5D-A688-2B21E62DC351",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:siemens:sinec_ins:1.0:sp2_update_2:*:*:*:*:*:*",
"matchCriteriaId": "6B405F22-5517-49F5-A7CA-1E50D58DFC75",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h615c_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "5921A877-18BF-43FE-915C-D226E140ACFC",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h615c:-:*:*:*:*:*:*:*",
"matchCriteriaId": "7296A1F2-D315-4FD5-8A73-65C480C855BE",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "Issue summary: Checking excessively long invalid RSA public keys may take\na long time.\n\nImpact summary: Applications that use the function EVP_PKEY_public_check()\nto check RSA public keys may experience long delays. Where the key that\nis being checked has been obtained from an untrusted source this may lead\nto a Denial of Service.\n\nWhen function EVP_PKEY_public_check() is called on RSA public keys,\na computation is done to confirm that the RSA modulus, n, is composite.\nFor valid RSA keys, n is a product of two or more large primes and this\ncomputation completes quickly. However, if n is an overly large prime,\nthen this computation would take a long time.\n\nAn application that calls EVP_PKEY_public_check() and supplies an RSA key\nobtained from an untrusted source could be vulnerable to a Denial of Service\nattack.\n\nThe function EVP_PKEY_public_check() is not called from other OpenSSL\nfunctions however it is called from the OpenSSL pkey command line\napplication. For that reason that application is also vulnerable if used\nwith the \u0027-pubin\u0027 and \u0027-check\u0027 options on untrusted data.\n\nThe OpenSSL SSL/TLS implementation is not affected by this issue.\n\nThe OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue."
},
{
"lang": "es",
"value": "Resumen del problema: la comprobaci\u00f3n de claves p\u00fablicas RSA inv\u00e1lidas excesivamente largas puede llevar mucho tiempo. Resumen de impacto: las aplicaciones que utilizan la funci\u00f3n EVP_PKEY_public_check() para comprobar las claves p\u00fablicas RSA pueden experimentar grandes retrasos. Cuando la clave que se est\u00e1 verificando se obtuvo de una fuente que no es confiable, esto puede dar lugar a una denegaci\u00f3n de servicio. Cuando se llama a la funci\u00f3n EVP_PKEY_public_check() en claves p\u00fablicas RSA, se realiza un c\u00e1lculo para confirmar que el m\u00f3dulo RSA, n, es compuesto. Para claves RSA v\u00e1lidas, n es un producto de dos o m\u00e1s n\u00fameros primos grandes y este c\u00e1lculo se completa r\u00e1pidamente. Sin embargo, si n es un n\u00famero primo demasiado grande, entonces este c\u00e1lculo llevar\u00eda mucho tiempo. Una aplicaci\u00f3n que llama a EVP_PKEY_public_check() y proporciona una clave RSA obtenida de una fuente que no es de confianza podr\u00eda ser vulnerable a un ataque de denegaci\u00f3n de servicio. La funci\u00f3n EVP_PKEY_public_check() no se llama desde otras funciones de OpenSSL, sin embargo, se llama desde la aplicaci\u00f3n de l\u00ednea de comandos pkey de OpenSSL. Por esa raz\u00f3n, esa aplicaci\u00f3n tambi\u00e9n es vulnerable si se usa con las opciones \u0027-pubin\u0027 y \u0027-check\u0027 en datos que no son de confianza. La implementaci\u00f3n de OpenSSL SSL/TLS no se ve afectada por este problema. Los proveedores FIPS OpenSSL 3.0 y 3.1 se ven afectados por este problema."
}
],
"id": "CVE-2023-6237",
"lastModified": "2026-11-10T14:05:10.233",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "HIGH",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 5.9,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
},
"exploitabilityScore": 2.2,
"impactScore": 3.6,
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"type": "Secondary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2023-6237",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-08-20T14:44:52.382969Z",
"version": "2.0.3"
}
}
]
},
"published": "2024-04-25T07:15:45.270",
"references": [
{
"source": "openssl-security@openssl.org",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/0b0f7abfb37350794a4b8960fafc292cd5d1b84d"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/18c02492138d1eb8b6548cb26e7b625fb2414a2a"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/a830f551557d3d66a84bbb18a5b889c640c36294"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Vendor Advisory"
],
"url": "https://www.openssl.org/news/secadv/20240115.txt"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Mailing List",
"Third Party Advisory"
],
"url": "http://www.openwall.com/lists/oss-security/2024/03/11/1"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/0b0f7abfb37350794a4b8960fafc292cd5d1b84d"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/18c02492138d1eb8b6548cb26e7b625fb2414a2a"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/a830f551557d3d66a84bbb18a5b889c640c36294"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Third Party Advisory"
],
"url": "https://security.netapp.com/advisory/ntap-20240531-0007/"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Vendor Advisory"
],
"url": "https://www.openssl.org/news/secadv/20240115.txt"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-265688.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-331112.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-769027.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-915275.html"
}
],
"sourceIdentifier": "openssl-security@openssl.org",
"vulnStatus": "Analyzed",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-606"
}
],
"source": "openssl-security@openssl.org",
"type": "Secondary"
}
]
}
FKIE_CVE-2024-9143
Vulnerability from fkie_nvd - Published: 2024-10-16 17:15 - Updated: 2026-11-09 15:56
Severity
Summary
Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted
explicit values for the field polynomial can lead to out-of-bounds memory reads
or writes.
Impact summary: Out of bound memory writes can lead to an application crash or
even a possibility of a remote code execution, however, in all the protocols
involving Elliptic Curve Cryptography that we're aware of, either only "named
curves" are supported, or, if explicit curve parameters are supported, they
specify an X9.62 encoding of binary (GF(2^m)) curves that can't represent
problematic input values. Thus the likelihood of existence of a vulnerable
application is low.
In particular, the X9.62 encoding is used for ECC keys in X.509 certificates,
so problematic inputs cannot occur in the context of processing X.509
certificates. Any problematic use-cases would have to be using an "exotic"
curve encoding.
The affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(),
and various supporting BN_GF2m_*() functions.
Applications working with "exotic" explicit binary (GF(2^m)) curve parameters,
that make it possible to represent invalid field polynomials with a zero
constant term, via the above or similar APIs, may terminate abruptly as a
result of reading or writing outside of array bounds. Remote code execution
cannot easily be ruled out.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.
References
Impacted products
{
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "OpenSSL",
"vendor": "OpenSSL",
"versions": [
{
"lessThan": "3.3.3",
"status": "affected",
"version": "3.3.0",
"versionType": "semver"
},
{
"lessThan": "3.2.4",
"status": "affected",
"version": "3.2.0",
"versionType": "semver"
},
{
"lessThan": "3.1.8",
"status": "affected",
"version": "3.1.0",
"versionType": "semver"
},
{
"lessThan": "3.0.16",
"status": "affected",
"version": "3.0.0",
"versionType": "semver"
},
{
"lessThan": "1.1.1zb",
"status": "affected",
"version": "1.1.1",
"versionType": "custom"
},
{
"lessThan": "1.0.2zl",
"status": "affected",
"version": "1.0.2",
"versionType": "custom"
}
]
}
],
"source": "openssl-security@openssl.org"
},
{
"affectedData": [
{
"defaultStatus": "unknown",
"product": "SIDIS Prime",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.0.700",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V1.1.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
}
],
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e"
}
],
"configurations": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "044201B0-B39B-4292-A1FA-B983FDB901EC",
"versionEndExcluding": "1.0.2zl",
"versionStartIncluding": "1.0.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "31A2D7BA-52F2-4CBF-AA2E-6BEC2233C577",
"versionEndExcluding": "1.1.1zb",
"versionStartIncluding": "1.1.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "4C4F1330-63D8-4599-8407-2DE13FE88ADF",
"versionEndExcluding": "3.0.16",
"versionStartIncluding": "3.0.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "1DD6904B-DDE9-4943-8E7C-99B2717920C3",
"versionEndExcluding": "3.1.8",
"versionStartIncluding": "3.1.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "92CA49C8-7697-480E-81A3-8D5911B3918C",
"versionEndExcluding": "3.2.4",
"versionStartIncluding": "3.2.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "180991A8-241E-4CC8-9F65-E711175283D9",
"versionEndExcluding": "3.3.3",
"versionStartIncluding": "3.3.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:debian:debian_linux:11.0:*:*:*:*:*:*:*",
"matchCriteriaId": "FA6FEEC2-9F11-4643-8827-749718254FED",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:netapp:active_iq_unified_manager:-:*:*:*:*:linux:*:*",
"matchCriteriaId": "F3E0B672-3E06-4422-B2A4-0BD073AEC2A1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:active_iq_unified_manager:-:*:*:*:*:vmware_vsphere:*:*",
"matchCriteriaId": "3A756737-1CC4-42C2-A4DF-E1C893B4E2D5",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:ontap_select_deploy_administration_utility:-:*:*:*:*:*:*:*",
"matchCriteriaId": "E7CF3019-975D-40BB-A8A4-894E62BD3797",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:ontap_tools:-:*:*:*:*:vmware_vsphere:*:*",
"matchCriteriaId": "CBCC384C-5DF0-41AB-B17B-6E9B6CAE8065",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:snapmanager:-:*:*:*:*:hyper-v:*:*",
"matchCriteriaId": "80774A35-B0B8-4F9C-99CA-23849978D158",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:netapp:brocade_fabric_operating_system:-:*:*:*:*:*:*:*",
"matchCriteriaId": "A2119FFC-08F9-4C3F-881C-9C72916BC652",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:bootstrap_os:-:*:*:*:*:*:*:*",
"matchCriteriaId": "95BA156C-C977-4F0C-8DFB-3FAE9CC8C02D",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:hci_compute_node:-:*:*:*:*:*:*:*",
"matchCriteriaId": "AD7447BC-F315-4298-A822-549942FC118B",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:a250_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "1236B66D-EB11-4324-929F-E2B86683C3C7",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:a250:-:*:*:*:*:*:*:*",
"matchCriteriaId": "281DFC67-46BB-4FC2-BE03-3C65C9311F65",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:500f_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "ECF32BB1-9A58-4821-AE49-5D5C8200631F",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:500f:-:*:*:*:*:*:*:*",
"matchCriteriaId": "F21DE67F-CDFD-4D36-9967-633CD0240C6F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:c250_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "F1AB1EC2-2560-494A-A51B-6F20CE318FEB",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:c250:-:*:*:*:*:*:*:*",
"matchCriteriaId": "58DE2B52-4E49-4CD0-9310-00291B0352C7",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h300s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "6770B6C3-732E-4E22-BF1C-2D2FD610061C",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h300s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "9F9C8C20-42EB-4AB5-BD97-212DEB070C43",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h500s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "7FFF7106-ED78-49BA-9EC5-B889E3685D53",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h500s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "E63D8B0F-006E-4801-BF9D-1C001BBFB4F9",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h700s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "56409CEC-5A1E-4450-AA42-641E459CC2AF",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h700s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "B06F4839-D16A-4A61-9BB5-55B13F41E47F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h410s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "D0B4AD8A-F172-4558-AEC6-FF424BA2D912",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h410s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "8497A4C9-8474-4A62-8331-3FE862ED4098",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h410c_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "234DEFE0-5CE5-4B0A-96B8-5D227CB8ED31",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h410c:-:*:*:*:*:*:*:*",
"matchCriteriaId": "CDDF61B7-EC5C-467C-B710-B89F502CD04F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h610c_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "89612649-BACF-4FAC-9BA4-324724FD93A6",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h610c:-:*:*:*:*:*:*:*",
"matchCriteriaId": "F3D9B255-C1AF-42D1-BF9B-13642FBDC080",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h610s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "FD7CFE0E-9D1E-4495-B302-89C3096FC0DF",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h610s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "F63A3FA7-AAED-4A9D-9FDE-6195302DA0F6",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h615c_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "5921A877-18BF-43FE-915C-D226E140ACFC",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h615c:-:*:*:*:*:*:*:*",
"matchCriteriaId": "7296A1F2-D315-4FD5-8A73-65C480C855BE",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:simatic_s7-1500_tm_mfp_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "54DEC927-C2D3-45C0-B8F3-03C1E97B2A72",
"versionEndExcluding": "1.1.1",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:simatic_s7-1500_tm_mfp:-:*:*:*:*:*:*:*",
"matchCriteriaId": "754051AB-27D3-41CA-B2C8-79BAD48C8750",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:siemens:sidis_prime:*:*:*:*:*:*:*:*",
"matchCriteriaId": "809D6A07-28BE-476D-A83E-582E626EA348",
"versionEndExcluding": "4.0.700",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:simatic_s7-1500_cpu_1518-4_pn\\/dp_mfp_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "DF6BB9FE-532C-4F75-9C81-89DB990EA137",
"versionEndExcluding": "3.1.5",
"versionStartIncluding": "3.1.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:simatic_s7-1500_cpu_1518-4_pn\\/dp_mfp:-:*:*:*:*:*:*:*",
"matchCriteriaId": "3BC4FA01-8DDB-41E4-B759-7B504F78AEBC",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wab762-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "E99C9E5C-D4D6-45D8-BB2F-AE8BEACC85F7",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wab762-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "C41E4D9E-23E6-449F-BE45-BB44C1F460D2",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wam763-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "7D7E9EC0-A564-4AD4-952C-2D8FDF462962",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wam763-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "1AAE316D-6BA6-4C3F-9EE1-E23E4CB6FD19",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wam766-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "377FD457-974D-49D2-810D-0E8C42B218BA",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wam766-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "AA96B540-439B-4A1A-9D7D-C45AEFBC7BE6",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wub762-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "D0E71F48-068F-4AE6-84C0-246F356561BD",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wub762-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "12F84DA5-E569-4019-A763-0A847A940F21",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wub762-1_ifeatures_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "8A679822-8E5E-489D-B8E6-B86F81BA01C3",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wub762-1_ifeatures:-:*:*:*:*:*:*:*",
"matchCriteriaId": "9720D013-10D4-46F6-A235-5641C39F2134",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wum763-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "69CBE039-BDDD-4415-9951-C5F7DF120E89",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wum763-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "C501445F-BDF6-4A0A-85FD-E6BFBF0A3C6F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wum766-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "B6F8A6B3-58C8-48A7-A432-CF762A39FF38",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wum766-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "4EB15599-F795-4D24-A4A6-CD826F6A7A13",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted\nexplicit values for the field polynomial can lead to out-of-bounds memory reads\nor writes.\n\nImpact summary: Out of bound memory writes can lead to an application crash or\neven a possibility of a remote code execution, however, in all the protocols\ninvolving Elliptic Curve Cryptography that we\u0027re aware of, either only \"named\ncurves\" are supported, or, if explicit curve parameters are supported, they\nspecify an X9.62 encoding of binary (GF(2^m)) curves that can\u0027t represent\nproblematic input values. Thus the likelihood of existence of a vulnerable\napplication is low.\n\nIn particular, the X9.62 encoding is used for ECC keys in X.509 certificates,\nso problematic inputs cannot occur in the context of processing X.509\ncertificates. Any problematic use-cases would have to be using an \"exotic\"\ncurve encoding.\n\nThe affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(),\nand various supporting BN_GF2m_*() functions.\n\nApplications working with \"exotic\" explicit binary (GF(2^m)) curve parameters,\nthat make it possible to represent invalid field polynomials with a zero\nconstant term, via the above or similar APIs, may terminate abruptly as a\nresult of reading or writing outside of array bounds. Remote code execution\ncannot easily be ruled out.\n\nThe FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue."
},
{
"lang": "es",
"value": "Resumen del problema: el uso de las API de curva el\u00edptica GF(2^m) de bajo nivel con valores expl\u00edcitos no confiables para el campo polinomial puede generar lecturas o escrituras de memoria fuera de los l\u00edmites. Resumen del impacto: las escrituras de memoria fuera de los l\u00edmites pueden generar un bloqueo de la aplicaci\u00f3n o incluso la posibilidad de una ejecuci\u00f3n de c\u00f3digo remoto; sin embargo, en todos los protocolos que involucran criptograf\u00eda de curva el\u00edptica que conocemos, solo se admiten \"curvas con nombre\" o, si se admiten par\u00e1metros de curva expl\u00edcitos, especifican una codificaci\u00f3n X9.62 de curvas binarias (GF(2^m)) que no pueden representar valores de entrada problem\u00e1ticos. Por lo tanto, la probabilidad de existencia de una aplicaci\u00f3n vulnerable es baja. En particular, la codificaci\u00f3n X9.62 se utiliza para claves ECC en certificados X.509, por lo que no pueden ocurrir entradas problem\u00e1ticas en el contexto del procesamiento de certificados X.509. Cualquier caso de uso problem\u00e1tico tendr\u00eda que utilizar una codificaci\u00f3n de curva \"ex\u00f3tica\". Las API afectadas incluyen: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params() y varias funciones de soporte BN_GF2m_*(). Las aplicaciones que trabajan con par\u00e1metros de curva binarios expl\u00edcitos \"ex\u00f3ticos\" (GF(2^m)), que permiten representar polinomios de campo no v\u00e1lidos con un t\u00e9rmino constante cero, a trav\u00e9s de las API anteriores o similares, pueden terminar abruptamente como resultado de la lectura o escritura fuera de los l\u00edmites de la matriz. La ejecuci\u00f3n remota de c\u00f3digo no se puede descartar f\u00e1cilmente. Los m\u00f3dulos FIPS en 3.3, 3.2, 3.1 y 3.0 no se ven afectados por este problema."
}
],
"id": "CVE-2024-9143",
"lastModified": "2026-11-09T15:56:44.170",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 8.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"exploitabilityScore": 2.8,
"impactScore": 5.9,
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"type": "Secondary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2024-9143",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-06T21:35:52.868340Z",
"version": "2.0.3"
}
}
]
},
"published": "2024-10-16T17:15:18.130",
"references": [
{
"source": "openssl-security@openssl.org",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/72ae83ad214d2eef262461365a1975707f862712"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/bc7e04d7c8d509fb78fc0e285aa948fb0da04700"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/c0d3e4d32d2805f49bec30547f225bc4d092e1f4"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/fdf6723362ca51bd883295efe206cb5b1cfa5154"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Permissions Required"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/8efc0cbaa8ebba8e116f7b81a876a4123594d86a"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Permissions Required"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/9d576994cec2b7aa37a91740ea7e680810957e41"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Vendor Advisory"
],
"url": "https://openssl-library.org/news/secadv/20241016.txt"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Mailing List",
"Third Party Advisory"
],
"url": "http://www.openwall.com/lists/oss-security/2024/10/16/1"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Mailing List",
"Third Party Advisory"
],
"url": "http://www.openwall.com/lists/oss-security/2024/10/23/1"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Mailing List",
"Third Party Advisory"
],
"url": "http://www.openwall.com/lists/oss-security/2024/10/24/1"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Mailing List",
"Third Party Advisory"
],
"url": "https://lists.debian.org/debian-lts-announce/2024/10/msg00033.html"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Mailing List",
"Third Party Advisory"
],
"url": "https://lists.debian.org/debian-lts-announce/2024/11/msg00000.html"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Third Party Advisory"
],
"url": "https://security.netapp.com/advisory/ntap-20241101-0001/"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-265688.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-277137.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-398330.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-769027.html"
}
],
"sourceIdentifier": "openssl-security@openssl.org",
"vulnStatus": "Analyzed",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-125"
},
{
"lang": "en",
"value": "CWE-787"
}
],
"source": "openssl-security@openssl.org",
"type": "Secondary"
}
]
}
FKIE_CVE-2024-2511
Vulnerability from fkie_nvd - Published: 2024-04-08 14:15 - Updated: 2026-11-06 19:29
Severity
Summary
Issue summary: Some non-default TLS server configurations can cause unbounded
memory growth when processing TLSv1.3 sessions
Impact summary: An attacker may exploit certain server configurations to trigger
unbounded memory growth that would lead to a Denial of Service
This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is
being used (but not if early_data support is also configured and the default
anti-replay protection is in use). In this case, under certain conditions, the
session cache can get into an incorrect state and it will fail to flush properly
as it fills. The session cache will continue to grow in an unbounded manner. A
malicious client could deliberately create the scenario for this failure to
force a Denial of Service. It may also happen by accident in normal operation.
This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS
clients.
The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL
1.0.2 is also not affected by this issue.
References
Impacted products
{
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "OpenSSL",
"vendor": "OpenSSL",
"versions": [
{
"lessThan": "3.2.2",
"status": "affected",
"version": "3.2.0",
"versionType": "semver"
},
{
"lessThan": "3.1.6",
"status": "affected",
"version": "3.1.0",
"versionType": "semver"
},
{
"lessThan": "3.0.14",
"status": "affected",
"version": "3.0.0",
"versionType": "semver"
},
{
"lessThan": "1.1.1y",
"status": "affected",
"version": "1.1.1",
"versionType": "custom"
}
]
}
],
"source": "openssl-security@openssl.org"
},
{
"affectedData": [
{
"defaultStatus": "unknown",
"product": "RUGGEDCOM RM1224 LTE(4G) EU",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "RUGGEDCOM RM1224 LTE(4G) NAM",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "RUGGEDCOM RST2428P",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M804PB",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M812-1 ADSL-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M812-1 ADSL-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M816-1 ADSL-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M816-1 ADSL-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M826-2 SHDSL-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M874-2",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M874-3",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M874-3 3G-Router (CN)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M876-3",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M876-3 (ROK)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M876-4",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M876-4 (EU)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M876-4 (NAM)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM853-1 (A1)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM853-1 (B1)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM853-1 (EU)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM856-1 (A1)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM856-1 (B1)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM856-1 (CN)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM856-1 (EU)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM856-1 (RoW)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE S615 EEC LAN-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE S615 LAN-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 family",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE XCM-/XRM-/XCH-/XRH-300 family",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V1.1.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
}
],
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e"
}
],
"configurations": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "431B7E44-458E-484F-B47E-3D767169BB48",
"versionEndIncluding": "1.1.1x",
"versionStartIncluding": "1.1.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "BABC09F4-3769-468D-8A25-8AF99DEAAFE4",
"versionEndExcluding": "3.0.14",
"versionStartIncluding": "3.0.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "B98E5F87-9FCB-4EE6-B93A-D8C7C373FF32",
"versionEndExcluding": "3.1.6",
"versionStartIncluding": "3.1.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*",
"matchCriteriaId": "8F9179A5-9A93-48EF-8113-B196C0665A09",
"versionEndExcluding": "3.2.2",
"versionStartIncluding": "3.2.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:debian:debian_linux:11.0:*:*:*:*:*:*:*",
"matchCriteriaId": "FA6FEEC2-9F11-4643-8827-749718254FED",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:a700s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "FDD92BFA-9117-4E6E-A13F-ED064B4B7284",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:a700s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "4B7DA42F-5D64-4967-A2D4-6210FE507841",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:netapp:active_iq_unified_manager:-:*:*:*:*:linux:*:*",
"matchCriteriaId": "F3E0B672-3E06-4422-B2A4-0BD073AEC2A1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:active_iq_unified_manager:-:*:*:*:*:vmware_vsphere:*:*",
"matchCriteriaId": "3A756737-1CC4-42C2-A4DF-E1C893B4E2D5",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:oncommand_workflow_automation:-:*:*:*:*:*:*:*",
"matchCriteriaId": "5735E553-9731-4AAC-BCFF-989377F817B3",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:ontap_9:-:*:*:*:*:*:*:*",
"matchCriteriaId": "AD886814-B4A0-4764-9F08-2060601D8E89",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:netapp:snapmanager:-:*:*:*:*:hyper-v:*:*",
"matchCriteriaId": "80774A35-B0B8-4F9C-99CA-23849978D158",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h300s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "6770B6C3-732E-4E22-BF1C-2D2FD610061C",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h300s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "9F9C8C20-42EB-4AB5-BD97-212DEB070C43",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h500s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "7FFF7106-ED78-49BA-9EC5-B889E3685D53",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h500s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "E63D8B0F-006E-4801-BF9D-1C001BBFB4F9",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h700s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "56409CEC-5A1E-4450-AA42-641E459CC2AF",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h700s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "B06F4839-D16A-4A61-9BB5-55B13F41E47F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h410s_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "D0B4AD8A-F172-4558-AEC6-FF424BA2D912",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h410s:-:*:*:*:*:*:*:*",
"matchCriteriaId": "8497A4C9-8474-4A62-8331-3FE862ED4098",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:h410c_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "234DEFE0-5CE5-4B0A-96B8-5D227CB8ED31",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:h410c:-:*:*:*:*:*:*:*",
"matchCriteriaId": "CDDF61B7-EC5C-467C-B710-B89F502CD04F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:bootstrap_os:-:*:*:*:*:*:*:*",
"matchCriteriaId": "95BA156C-C977-4F0C-8DFB-3FAE9CC8C02D",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:hci_compute_node:-:*:*:*:*:*:*:*",
"matchCriteriaId": "AD7447BC-F315-4298-A822-549942FC118B",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:a250_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "1236B66D-EB11-4324-929F-E2B86683C3C7",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:a250:-:*:*:*:*:*:*:*",
"matchCriteriaId": "281DFC67-46BB-4FC2-BE03-3C65C9311F65",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:500f_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "ECF32BB1-9A58-4821-AE49-5D5C8200631F",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:500f:-:*:*:*:*:*:*:*",
"matchCriteriaId": "F21DE67F-CDFD-4D36-9967-633CD0240C6F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:netapp:c250_firmware:-:*:*:*:*:*:*:*",
"matchCriteriaId": "F1AB1EC2-2560-494A-A51B-6F20CE318FEB",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:netapp:c250:-:*:*:*:*:*:*:*",
"matchCriteriaId": "58DE2B52-4E49-4CD0-9310-00291B0352C7",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:simatic_s7-1500_tm_mfp_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "54DEC927-C2D3-45C0-B8F3-03C1E97B2A72",
"versionEndExcluding": "1.1.1",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:simatic_s7-1500_tm_mfp:-:*:*:*:*:*:*:*",
"matchCriteriaId": "754051AB-27D3-41CA-B2C8-79BAD48C8750",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:ruggedcom_rm1224_lte\\(4g\\)_eu_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "4F7981A8-C60A-45EE-92E5-8149A3F7760F",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:ruggedcom_rm1224_lte\\(4g\\)_eu:-:*:*:*:*:*:*:*",
"matchCriteriaId": "03D8CF59-D9D4-4C50-A6E6-D6B5BDB31AEC",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:ruggedcom_rm1224_lte\\(4g\\)_nam_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "6BF2D6E7-45CD-4303-B9A9-A576BC2F1B6F",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:ruggedcom_rm1224_lte\\(4g\\)_nam:-:*:*:*:*:*:*:*",
"matchCriteriaId": "400ACE99-AF15-4C20-9A6D-F8584DA5C7CE",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_m804pb_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "077F8316-E68A-4787-88EF-8016D8F06F00",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_m804pb:-:*:*:*:*:*:*:*",
"matchCriteriaId": "C6EBA42A-93FF-4883-8626-EF78D38374D3",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_m812-1_adsl-router_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "A48FD14A-B819-4F7F-9140-1455FBDC5F02",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_m812-1_adsl-router:-:*:*:*:*:*:*:*",
"matchCriteriaId": "451B1162-CCDE-4658-86B7-DF98468B2721",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_m816-1_adsl-router_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "55EE57A9-A89F-4140-913F-0395A942CB31",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_m816-1_adsl-router:-:*:*:*:*:*:*:*",
"matchCriteriaId": "80BE81AD-F440-4009-A33F-DBE957C3CDD6",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_m826-2_shdsl-router_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "C5B23329-4DF7-456D-9D24-F236B6238583",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_m826-2_shdsl-router:-:*:*:*:*:*:*:*",
"matchCriteriaId": "39951670-CF88-460C-B1D5-6DCFBC7F573D",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_m874-2_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "1DD142E4-6F7F-4751-93B6-C3508A0828DA",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_m874-2:-:*:*:*:*:*:*:*",
"matchCriteriaId": "C933ED27-2206-4734-8EB8-6A6431D1FBF1",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_m874-3_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "1B7D6063-EB3D-4150-9B89-D62C38E65787",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_m874-3:-:*:*:*:*:*:*:*",
"matchCriteriaId": "D3258DC7-0461-4C65-8292-85C9965EA83D",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_m874-3_3g-router_\\(cn\\)_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "9650FD9D-BED7-4F6C-8759-7D60BF60D426",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_m874-3_3g-router_\\(cn\\):-:*:*:*:*:*:*:*",
"matchCriteriaId": "FEA94E3C-6B00-407F-81BF-964D156E061F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_m876-3_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "BFE41F12-80FC-46CE-BBFA-E11695C56E30",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_m876-3:-:*:*:*:*:*:*:*",
"matchCriteriaId": "BD221BA9-3448-49E4-B3A3-D88B939785AC",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_m876-3_\\(rok\\)_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "D5A8F79E-C849-4D3B-9103-8068DD84DAEC",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_m876-3_\\(rok\\):-:*:*:*:*:*:*:*",
"matchCriteriaId": "A3FA80AA-4869-46BF-8A1B-17C54219338C",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_m876-4_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "FA02FE0C-5813-4994-9887-BE0AB1344FEB",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_m876-4:-:*:*:*:*:*:*:*",
"matchCriteriaId": "94E4CCE9-71F7-4960-B7DE-5298EFB7C619",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_m876-4_\\(eu\\)_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "B43540C5-9208-42C9-BDB6-2D6C0EB665C7",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_m876-4_\\(eu\\):-:*:*:*:*:*:*:*",
"matchCriteriaId": "3886E130-C39C-43D2-8B1F-F773874F8002",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_m876-4_\\(nam\\)_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "EC56B2F3-EEF5-4891-92EE-917F6EA685E7",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_m876-4_\\(nam\\):-:*:*:*:*:*:*:*",
"matchCriteriaId": "CDBED616-1074-44CE-98C8-48A5387A5DAF",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_mum853-1_\\(a1\\)_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "BD477A4C-4C41-4068-872C-2D633E2DB5C9",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_mum853-1_\\(a1\\):-:*:*:*:*:*:*:*",
"matchCriteriaId": "DC884995-EA34-4EFA-8B3A-5C7B9BC71C32",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_mum853-1_\\(b1\\)_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "01EEE560-AC67-47FE-8B30-F699CAF951FF",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_mum853-1_\\(b1\\):-:*:*:*:*:*:*:*",
"matchCriteriaId": "A94E232B-12ED-4E9D-A6D7-C66391C48F06",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_mum853-1_\\(eu\\)_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "5C0D7706-40DC-4598-B24C-9BD7B20B31F4",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_mum853-1_\\(eu\\):-:*:*:*:*:*:*:*",
"matchCriteriaId": "94AF78F7-3DF5-40FA-A496-4523183DB792",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_mum856-1_\\(a1\\)_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "6D13A44E-DE1F-4BE3-AD0B-FCF4E8DAA9E7",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_mum856-1_\\(a1\\):-:*:*:*:*:*:*:*",
"matchCriteriaId": "FF849848-87EA-41D5-8E19-871A306D332A",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_mum856-1_\\(b1\\)_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "C56063A9-5A2A-4F19-AAAC-A40A01D0D69F",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_mum856-1_\\(b1\\):-:*:*:*:*:*:*:*",
"matchCriteriaId": "77E5245F-8AA7-4132-AA7F-1FE4F86B703E",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_mum856-1_\\(cn\\)_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "27486547-EDF2-45C2-84FF-7B74D75304F6",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_mum856-1_\\(cn\\):-:*:*:*:*:*:*:*",
"matchCriteriaId": "2B05B62B-1B41-4A3D-8591-57B4D0EF476F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_mum856-1_\\(eu\\)_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "124DE318-3EFE-4FDA-8306-462BB936F892",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_mum856-1_\\(eu\\):-:*:*:*:*:*:*:*",
"matchCriteriaId": "A219D2B9-1D71-4831-BD0B-790B7057344C",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_mum856-1_\\(row\\)_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "973C1E5B-8A98-4345-8BE3-A4B7B39EEF4F",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_mum856-1_\\(row\\):-:*:*:*:*:*:*:*",
"matchCriteriaId": "8D6FED00-E40C-458A-8D5C-9B1826DBAE24",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_s615_eec_lan-router_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "803BA9B6-3921-44F0-9602-21AD847D419B",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_s615_eec_lan-router:-:*:*:*:*:*:*:*",
"matchCriteriaId": "2E8F4C94-781F-4796-83DD-A28E6D347AD8",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_s615_lan-router_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "A96699CD-9F15-45B9-977F-FE5C0BA964D7",
"versionEndExcluding": "8.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_s615_lan-router:-:*:*:*:*:*:*:*",
"matchCriteriaId": "B98A1E7F-5A9A-4620-8137-7C1D84815917",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:simatic_s7-1500_cpu_1518-4_pn\\/dp_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "C9AFA17A-786C-41D7-AF75-4E9829D8AABE",
"versionEndExcluding": "3.1.5",
"versionStartIncluding": "3.1.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:simatic_s7-1500_cpu_1518-4_pn\\/dp_mfp:-:*:*:*:*:*:*:*",
"matchCriteriaId": "3BC4FA01-8DDB-41E4-B759-7B504F78AEBC",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:sinec_os:*:*:*:*:*:*:*:*",
"matchCriteriaId": "3D5BAE57-7846-4EDC-B2F7-172B52792821",
"versionEndExcluding": "3.1",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:ruggedcom_rst2428p:-:*:*:*:*:*:*:*",
"matchCriteriaId": "5162CF70-42A4-4CBD-BE7E-17526719138A",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:sinec_os:*:*:*:*:*:*:*:*",
"matchCriteriaId": "3D5BAE57-7846-4EDC-B2F7-172B52792821",
"versionEndExcluding": "3.1",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:ruggedcom_rst2428p:-:*:*:*:*:*:*:*",
"matchCriteriaId": "5162CF70-42A4-4CBD-BE7E-17526719138A",
"vulnerable": false
},
{
"criteria": "cpe:2.3:h:siemens:scalance_xcm323:-:*:*:*:*:*:*:*",
"matchCriteriaId": "56F3D180-748A-4230-AF25-1DF84590B697",
"vulnerable": false
},
{
"criteria": "cpe:2.3:h:siemens:scalance_xcm324:-:*:*:*:*:*:*:*",
"matchCriteriaId": "136D0CA3-725F-4D2F-9CC8-50900A6B34C8",
"vulnerable": false
},
{
"criteria": "cpe:2.3:h:siemens:scalance_xcm328:-:*:*:*:*:*:*:*",
"matchCriteriaId": "C2EC8600-BA60-4924-B884-AFAA2479148F",
"vulnerable": false
},
{
"criteria": "cpe:2.3:h:siemens:scalance_xcm332:-:*:*:*:*:*:*:*",
"matchCriteriaId": "05A09417-83A6-42AC-A89E-DEFDC942DA39",
"vulnerable": false
},
{
"criteria": "cpe:2.3:h:siemens:scalance_xrh334:-:*:*:*:*:*:*:*",
"matchCriteriaId": "06FA1667-965A-4119-A519-F9119B5358DF",
"vulnerable": false
},
{
"criteria": "cpe:2.3:h:siemens:scalance_xrm334:-:*:*:*:*:*:*:*",
"matchCriteriaId": "C5FC3042-0224-45AE-B516-7934EF15DCC8",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wab762-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "E99C9E5C-D4D6-45D8-BB2F-AE8BEACC85F7",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wab762-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "C41E4D9E-23E6-449F-BE45-BB44C1F460D2",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wam763-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "7D7E9EC0-A564-4AD4-952C-2D8FDF462962",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wam763-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "1AAE316D-6BA6-4C3F-9EE1-E23E4CB6FD19",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wam766-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "377FD457-974D-49D2-810D-0E8C42B218BA",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wam766-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "AA96B540-439B-4A1A-9D7D-C45AEFBC7BE6",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wub762-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "D0E71F48-068F-4AE6-84C0-246F356561BD",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wub762-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "12F84DA5-E569-4019-A763-0A847A940F21",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wub762-1_ifeatures_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "8A679822-8E5E-489D-B8E6-B86F81BA01C3",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wub762-1_ifeatures:-:*:*:*:*:*:*:*",
"matchCriteriaId": "9720D013-10D4-46F6-A235-5641C39F2134",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wum763-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "69CBE039-BDDD-4415-9951-C5F7DF120E89",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wum763-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "C501445F-BDF6-4A0A-85FD-E6BFBF0A3C6F",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:siemens:scalance_wum766-1_firmware:*:*:*:*:*:*:*:*",
"matchCriteriaId": "B6F8A6B3-58C8-48A7-A432-CF762A39FF38",
"versionEndExcluding": "3.0.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
},
{
"cpeMatch": [
{
"criteria": "cpe:2.3:h:siemens:scalance_wum766-1:-:*:*:*:*:*:*:*",
"matchCriteriaId": "4EB15599-F795-4D24-A4A6-CD826F6A7A13",
"vulnerable": false
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
},
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:siemens:sinec_ins:*:*:*:*:*:*:*:*",
"matchCriteriaId": "C89891C1-DFD7-4E1F-80A9-7485D86A15B5",
"versionEndExcluding": "1.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:siemens:sinec_ins:1.0:-:*:*:*:*:*:*",
"matchCriteriaId": "4664B195-AF14-4834-82B3-0B2C98020EB6",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:siemens:sinec_ins:1.0:sp1:*:*:*:*:*:*",
"matchCriteriaId": "75BC588E-CDF0-404E-AD61-02093A1DF343",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:siemens:sinec_ins:1.0:sp2:*:*:*:*:*:*",
"matchCriteriaId": "A334F7B4-7283-4453-BAED-D2E01B7F8A6E",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:siemens:sinec_ins:1.0:sp2_update_1:*:*:*:*:*:*",
"matchCriteriaId": "A6BEA71C-CA81-4B5D-A688-2B21E62DC351",
"vulnerable": true
},
{
"criteria": "cpe:2.3:a:siemens:sinec_ins:1.0:sp2_update_2:*:*:*:*:*:*",
"matchCriteriaId": "6B405F22-5517-49F5-A7CA-1E50D58DFC75",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "Issue summary: Some non-default TLS server configurations can cause unbounded\nmemory growth when processing TLSv1.3 sessions\n\nImpact summary: An attacker may exploit certain server configurations to trigger\nunbounded memory growth that would lead to a Denial of Service\n\nThis problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is\nbeing used (but not if early_data support is also configured and the default\nanti-replay protection is in use). In this case, under certain conditions, the\nsession cache can get into an incorrect state and it will fail to flush properly\nas it fills. The session cache will continue to grow in an unbounded manner. A\nmalicious client could deliberately create the scenario for this failure to\nforce a Denial of Service. It may also happen by accident in normal operation.\n\nThis issue only affects TLS servers supporting TLSv1.3. It does not affect TLS\nclients.\n\nThe FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL\n1.0.2 is also not affected by this issue."
},
{
"lang": "es",
"value": "Resumen del problema: algunas configuraciones de servidor TLS no predeterminadas pueden causar un crecimiento ilimitado de la memoria al procesar sesiones TLSv1.3. Resumen de impacto: un atacante puede explotar ciertas configuraciones del servidor para desencadenar un crecimiento ilimitado de la memoria que conducir\u00eda a una denegaci\u00f3n de servicio. Este problema puede ocurrir en TLSv1.3 si se utiliza la opci\u00f3n SSL_OP_NO_TICKET no predeterminada (pero no si tambi\u00e9n se configura la compatibilidad con early_data y se utiliza la protecci\u00f3n antirrepetici\u00f3n predeterminada). En este caso, bajo ciertas condiciones, el cach\u00e9 de la sesi\u00f3n puede entrar en un estado incorrecto y no se vaciar\u00e1 correctamente a medida que se llena. La cach\u00e9 de la sesi\u00f3n seguir\u00e1 creciendo de forma ilimitada. Un cliente malintencionado podr\u00eda crear deliberadamente el escenario para que este fallo fuerce una denegaci\u00f3n de servicio. Tambi\u00e9n puede ocurrir por accidente durante el funcionamiento normal. Este problema solo afecta a los servidores TLS que admiten TLSv1.3. No afecta a los clientes TLS. Los m\u00f3dulos FIPS en 3.2, 3.1 y 3.0 no se ven afectados por este problema. OpenSSL 1.0.2 tampoco se ve afectado por este problema."
}
],
"id": "CVE-2024-2511",
"lastModified": "2026-11-06T19:29:12.633",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "HIGH",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 5.9,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
},
"exploitabilityScore": 2.2,
"impactScore": 3.6,
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"type": "Secondary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2024-2511",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-04-09T15:14:41.481807Z",
"version": "2.0.3"
}
}
]
},
"published": "2024-04-08T14:15:07.660",
"references": [
{
"source": "openssl-security@openssl.org",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/7e4d731b1c07201ad9374c1cd9ac5263bdf35bce"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/b52867a9f618bb955bed2a3ce3db4d4f97ed8e5d"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/e9d7083e241670332e0443da0f0d4ffb52829f08"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Permissions Required"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/5f8d25770ae6437db119dfc951e207271a326640"
},
{
"source": "openssl-security@openssl.org",
"tags": [
"Vendor Advisory"
],
"url": "https://www.openssl.org/news/secadv/20240408.txt"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Mailing List",
"Third Party Advisory"
],
"url": "http://www.openwall.com/lists/oss-security/2024/04/08/5"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/7e4d731b1c07201ad9374c1cd9ac5263bdf35bce"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/b52867a9f618bb955bed2a3ce3db4d4f97ed8e5d"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Patch"
],
"url": "https://github.com/openssl/openssl/commit/e9d7083e241670332e0443da0f0d4ffb52829f08"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Permissions Required"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/5f8d25770ae6437db119dfc951e207271a326640"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Mailing List",
"Third Party Advisory"
],
"url": "https://lists.debian.org/debian-lts-announce/2024/10/msg00033.html"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Mailing List",
"Third Party Advisory"
],
"url": "https://lists.debian.org/debian-lts-announce/2024/11/msg00000.html"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Third Party Advisory"
],
"url": "https://security.netapp.com/advisory/ntap-20240503-0013/"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"tags": [
"Vendor Advisory"
],
"url": "https://www.openssl.org/news/secadv/20240408.txt"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-265688.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-354112.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-398330.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-613116.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-769027.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"tags": [
"Third Party Advisory"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-915275.html"
}
],
"sourceIdentifier": "openssl-security@openssl.org",
"vulnStatus": "Analyzed",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-1325"
}
],
"source": "openssl-security@openssl.org",
"type": "Secondary"
}
]
}
CVE-2024-9143 (GCVE-0-2024-9143)
Vulnerability from nvd – Published: 2024-10-16 17:09 – Updated: 2026-11-06 21:35
VLAI
EPSS
VEX
Title
Low-level invalid GF(2^m) parameters lead to OOB memory access
Summary
Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted
explicit values for the field polynomial can lead to out-of-bounds memory reads
or writes.
Impact summary: Out of bound memory writes can lead to an application crash or
even a possibility of a remote code execution, however, in all the protocols
involving Elliptic Curve Cryptography that we're aware of, either only "named
curves" are supported, or, if explicit curve parameters are supported, they
specify an X9.62 encoding of binary (GF(2^m)) curves that can't represent
problematic input values. Thus the likelihood of existence of a vulnerable
application is low.
In particular, the X9.62 encoding is used for ECC keys in X.509 certificates,
so problematic inputs cannot occur in the context of processing X.509
certificates. Any problematic use-cases would have to be using an "exotic"
curve encoding.
The affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(),
and various supporting BN_GF2m_*() functions.
Applications working with "exotic" explicit binary (GF(2^m)) curve parameters,
that make it possible to represent invalid field polynomials with a zero
constant term, via the above or similar APIs, may terminate abruptly as a
result of reading or writing outside of array bounds. Remote code execution
cannot easily be ruled out.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.
Severity
8.8 (High)
SSVC
Exploitation: none
Automatable: no
Technical Impact: total
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-11-06 21:35 UTC
Assigner
References
17 references
Impacted products
6 products
| Vendor | Product | Version | |
|---|---|---|---|
| OpenSSL | OpenSSL |
Affected:
3.3.0 , < 3.3.3
(semver)
Affected: 3.2.0 , < 3.2.4 (semver) Affected: 3.1.0 , < 3.1.8 (semver) Affected: 3.0.0 , < 3.0.16 (semver) Affected: 1.1.1 , < 1.1.1zb (custom) Affected: 1.0.2 , < 1.0.2zl (custom) |
|
| Siemens | SIDIS Prime |
Affected:
0 , < V4.0.700
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518-4 PN/DP MFP |
Affected:
V3.1.0 , < V3.1.5
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP |
Affected:
V3.1.0 , < V3.1.5
(custom)
|
|
| Siemens | SIMATIC S7-1500 TM MFP - GNU/Linux subsystem |
Affected:
0 , < V1.1.1
(custom)
|
|
| Siemens | SIPLUS S7-1500 CPU 1518-4 PN/DP MFP |
Affected:
V3.1.0 , < V3.1.5
(custom)
|
Date Public
2024-10-16 14:00
{
"containers": {
"adp": [
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 8.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2024-9143",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-06T21:35:52.868340Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-06T21:35:56.608Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
},
{
"providerMetadata": {
"dateUpdated": "2025-11-03T22:33:18.178Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2024/10/16/1"
},
{
"url": "http://www.openwall.com/lists/oss-security/2024/10/23/1"
},
{
"url": "http://www.openwall.com/lists/oss-security/2024/10/24/1"
},
{
"url": "https://security.netapp.com/advisory/ntap-20241101-0001/"
},
{
"url": "https://lists.debian.org/debian-lts-announce/2024/11/msg00000.html"
},
{
"url": "https://lists.debian.org/debian-lts-announce/2024/10/msg00033.html"
}
],
"title": "CVE Program Container"
},
{
"affected": [
{
"defaultStatus": "unknown",
"product": "SIDIS Prime",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.0.700",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V1.1.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-15T00:37:50.974Z",
"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"shortName": "siemens-SADP"
},
"references": [
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-398330.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-265688.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-769027.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-277137.html"
}
],
"x_adpType": "supplier"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "OpenSSL",
"vendor": "OpenSSL",
"versions": [
{
"lessThan": "3.3.3",
"status": "affected",
"version": "3.3.0",
"versionType": "semver"
},
{
"lessThan": "3.2.4",
"status": "affected",
"version": "3.2.0",
"versionType": "semver"
},
{
"lessThan": "3.1.8",
"status": "affected",
"version": "3.1.0",
"versionType": "semver"
},
{
"lessThan": "3.0.16",
"status": "affected",
"version": "3.0.0",
"versionType": "semver"
},
{
"lessThan": "1.1.1zb",
"status": "affected",
"version": "1.1.1",
"versionType": "custom"
},
{
"lessThan": "1.0.2zl",
"status": "affected",
"version": "1.0.2",
"versionType": "custom"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Google OSS-Fuzz-Gen"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Viktor Dukhovni"
}
],
"datePublic": "2024-10-16T14:00:00.000Z",
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted\u003cbr\u003eexplicit values for the field polynomial can lead to out-of-bounds memory reads\u003cbr\u003eor writes.\u003cbr\u003e\u003cbr\u003eImpact summary: Out of bound memory writes can lead to an application crash or\u003cbr\u003eeven a possibility of a remote code execution, however, in all the protocols\u003cbr\u003einvolving Elliptic Curve Cryptography that we\u0027re aware of, either only \"named\u003cbr\u003ecurves\" are supported, or, if explicit curve parameters are supported, they\u003cbr\u003especify an X9.62 encoding of binary (GF(2^m)) curves that can\u0027t represent\u003cbr\u003eproblematic input values. Thus the likelihood of existence of a vulnerable\u003cbr\u003eapplication is low.\u003cbr\u003e\u003cbr\u003eIn particular, the X9.62 encoding is used for ECC keys in X.509 certificates,\u003cbr\u003eso problematic inputs cannot occur in the context of processing X.509\u003cbr\u003ecertificates. Any problematic use-cases would have to be using an \"exotic\"\u003cbr\u003ecurve encoding.\u003cbr\u003e\u003cbr\u003eThe affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(),\u003cbr\u003eand various supporting BN_GF2m_*() functions.\u003cbr\u003e\u003cbr\u003eApplications working with \"exotic\" explicit binary (GF(2^m)) curve parameters,\u003cbr\u003ethat make it possible to represent invalid field polynomials with a zero\u003cbr\u003econstant term, via the above or similar APIs, may terminate abruptly as a\u003cbr\u003eresult of reading or writing outside of array bounds. Remote code execution\u003cbr\u003ecannot easily be ruled out.\u003cbr\u003e\u003cbr\u003eThe FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue."
}
],
"value": "Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted\nexplicit values for the field polynomial can lead to out-of-bounds memory reads\nor writes.\n\nImpact summary: Out of bound memory writes can lead to an application crash or\neven a possibility of a remote code execution, however, in all the protocols\ninvolving Elliptic Curve Cryptography that we\u0027re aware of, either only \"named\ncurves\" are supported, or, if explicit curve parameters are supported, they\nspecify an X9.62 encoding of binary (GF(2^m)) curves that can\u0027t represent\nproblematic input values. Thus the likelihood of existence of a vulnerable\napplication is low.\n\nIn particular, the X9.62 encoding is used for ECC keys in X.509 certificates,\nso problematic inputs cannot occur in the context of processing X.509\ncertificates. Any problematic use-cases would have to be using an \"exotic\"\ncurve encoding.\n\nThe affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(),\nand various supporting BN_GF2m_*() functions.\n\nApplications working with \"exotic\" explicit binary (GF(2^m)) curve parameters,\nthat make it possible to represent invalid field polynomials with a zero\nconstant term, via the above or similar APIs, may terminate abruptly as a\nresult of reading or writing outside of array bounds. Remote code execution\ncannot easily be ruled out.\n\nThe FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue."
}
],
"metrics": [
{
"format": "other",
"other": {
"content": {
"text": "Low"
},
"type": "https://openssl-library.org/policies/general/security-policy/"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-125",
"description": "CWE-125 Out-of-bounds Read",
"lang": "en",
"type": "CWE"
},
{
"cweId": "CWE-787",
"description": "CWE-787 Out-of-bounds Write",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2025-09-01T08:29:10.392Z",
"orgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
"shortName": "openssl"
},
"references": [
{
"name": "OpenSSL Advisory",
"tags": [
"vendor-advisory"
],
"url": "https://openssl-library.org/news/secadv/20241016.txt"
},
{
"name": "3.3.3 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/c0d3e4d32d2805f49bec30547f225bc4d092e1f4"
},
{
"name": "3.2.4 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/bc7e04d7c8d509fb78fc0e285aa948fb0da04700"
},
{
"name": "3.1.8 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/fdf6723362ca51bd883295efe206cb5b1cfa5154"
},
{
"name": "3.0.16 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/72ae83ad214d2eef262461365a1975707f862712"
},
{
"name": "1.1.1zb git commit",
"tags": [
"patch"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/8efc0cbaa8ebba8e116f7b81a876a4123594d86a"
},
{
"name": "1.0.2zl git commit",
"tags": [
"patch"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/9d576994cec2b7aa37a91740ea7e680810957e41"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Low-level invalid GF(2^m) parameters lead to OOB memory access",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
"assignerShortName": "openssl",
"cveId": "CVE-2024-9143",
"datePublished": "2024-10-16T17:09:23.844Z",
"dateReserved": "2024-09-24T08:37:04.834Z",
"dateUpdated": "2026-11-06T21:35:56.608Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2024-5535 (GCVE-0-2024-5535)
Vulnerability from nvd – Published: 2024-06-27 10:30 – Updated: 2026-10-15 00:29
VLAI
EPSS
VEX
Title
SSL_select_next_proto buffer overread
Summary
Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an
empty supported client protocols buffer may cause a crash or memory contents to
be sent to the peer.
Impact summary: A buffer overread can have a range of potential consequences
such as unexpected application beahviour or a crash. In particular this issue
could result in up to 255 bytes of arbitrary private data from memory being sent
to the peer leading to a loss of confidentiality. However, only applications
that directly call the SSL_select_next_proto function with a 0 length list of
supported client protocols are affected by this issue. This would normally never
be a valid scenario and is typically not under attacker control but may occur by
accident in the case of a configuration or programming error in the calling
application.
The OpenSSL API function SSL_select_next_proto is typically used by TLS
applications that support ALPN (Application Layer Protocol Negotiation) or NPN
(Next Protocol Negotiation). NPN is older, was never standardised and
is deprecated in favour of ALPN. We believe that ALPN is significantly more
widely deployed than NPN. The SSL_select_next_proto function accepts a list of
protocols from the server and a list of protocols from the client and returns
the first protocol that appears in the server list that also appears in the
client list. In the case of no overlap between the two lists it returns the
first item in the client list. In either case it will signal whether an overlap
between the two lists was found. In the case where SSL_select_next_proto is
called with a zero length client list it fails to notice this condition and
returns the memory immediately following the client list pointer (and reports
that there was no overlap in the lists).
This function is typically called from a server side application callback for
ALPN or a client side application callback for NPN. In the case of ALPN the list
of protocols supplied by the client is guaranteed by libssl to never be zero in
length. The list of server protocols comes from the application and should never
normally be expected to be of zero length. In this case if the
SSL_select_next_proto function has been called as expected (with the list
supplied by the client passed in the client/client_len parameters), then the
application will not be vulnerable to this issue. If the application has
accidentally been configured with a zero length server list, and has
accidentally passed that zero length server list in the client/client_len
parameters, and has additionally failed to correctly handle a "no overlap"
response (which would normally result in a handshake failure in ALPN) then it
will be vulnerable to this problem.
In the case of NPN, the protocol permits the client to opportunistically select
a protocol when there is no overlap. OpenSSL returns the first client protocol
in the no overlap case in support of this. The list of client protocols comes
from the application and should never normally be expected to be of zero length.
However if the SSL_select_next_proto function is accidentally called with a
client_len of 0 then an invalid memory pointer will be returned instead. If the
application uses this output as the opportunistic protocol then the loss of
confidentiality will occur.
This issue has been assessed as Low severity because applications are most
likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not
widely used. It also requires an application configuration or programming error.
Finally, this issue would not typically be under attacker control making active
exploitation unlikely.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.
Due to the low severity of this issue we are not issuing new releases of
OpenSSL at this time. The fix will be included in the next releases when they
become available.
Severity
9.1 (Critical)
SSVC
Exploitation: none
Automatable: yes
Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2024-11-08 00:00 UTC
CWE
- CWE-125 - Out-of-bounds Read
Assigner
References
21 references
Impacted products
10 products
| Vendor | Product | Version | |
|---|---|---|---|
| OpenSSL | OpenSSL |
Affected:
3.3.0 , < 3.3.2
(semver)
Affected: 3.2.0 , < 3.2.3 (semver) Affected: 3.1.0 , < 3.1.7 (semver) Affected: 3.0.0 , < 3.0.15 (semver) Affected: 1.1.1 , < 1.1.1za (custom) Affected: 1.0.2 , < 1.0.2zk (custom) |
|
| openssl | openssl |
Affected:
3.3.0 , < 3.3.2
(custom)
Affected: 3.2.0 , < 3.2.3 (custom) Affected: 3.1.0 , < 3.1.7 (custom) Affected: 3.0.0 , < 3.0.15 (custom) Affected: 1.1.1 , < 1.1.1za (custom) Affected: 1.0.2 , < 1.0.2zk (custom) cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:* |
|
| Siemens | RUGGEDCOM RST2428P |
Affected:
0 , < V3.1
(custom)
|
|
| Siemens | SCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 family |
Unaffected:
0 , < *
(custom)
|
|
| Siemens | SCALANCE XCM-/XRM-/XCH-/XRH-300 family |
Affected:
0 , < V3.1
(custom)
|
|
| Siemens | SIDIS Prime |
Affected:
0 , < V4.0.700
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518-4 PN/DP MFP |
Affected:
V3.1.0 , < V3.1.5
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP |
Affected:
V3.1.0 , < V3.1.5
(custom)
|
|
| Siemens | SIMATIC S7-1500 TM MFP - GNU/Linux subsystem |
Affected:
0 , < V1.1.1
(custom)
|
|
| Siemens | SIPLUS S7-1500 CPU 1518-4 PN/DP MFP |
Affected:
V3.1.0 , < V3.1.5
(custom)
|
Date Public
2024-06-26 23:00
{
"containers": {
"adp": [
{
"affected": [
{
"cpes": [
"cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*"
],
"defaultStatus": "unknown",
"product": "openssl",
"vendor": "openssl",
"versions": [
{
"lessThan": "3.3.2",
"status": "affected",
"version": "3.3.0",
"versionType": "custom"
},
{
"lessThan": "3.2.3",
"status": "affected",
"version": "3.2.0",
"versionType": "custom"
},
{
"lessThan": "3.1.7",
"status": "affected",
"version": "3.1.0",
"versionType": "custom"
},
{
"lessThan": "3.0.15",
"status": "affected",
"version": "3.0.0",
"versionType": "custom"
},
{
"lessThan": "1.1.1za",
"status": "affected",
"version": "1.1.1",
"versionType": "custom"
},
{
"lessThan": "1.0.2zk",
"status": "affected",
"version": "1.0.2",
"versionType": "custom"
}
]
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 9.1,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "HIGH",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2024-5535",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-11-08T00:00:00+00:00",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2024-11-14T04:55:17.007Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
},
{
"providerMetadata": {
"dateUpdated": "2025-11-03T22:32:30.900Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"name": "OpenSSL Advisory",
"tags": [
"vendor-advisory",
"x_transferred"
],
"url": "https://www.openssl.org/news/secadv/20240627.txt"
},
{
"name": "3.3.2 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/e86ac436f0bd54d4517745483e2315650fae7b2c"
},
{
"name": "3.2.3 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/99fb785a5f85315b95288921a321a935ea29a51e"
},
{
"name": "3.1.7 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/4ada436a1946cbb24db5ab4ca082b69c1bc10f37"
},
{
"name": "3.0.15 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/cf6f91f6121f4db167405db2f0de410a456f260c"
},
{
"name": "1.1.1za git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/b78ec0824da857223486660177d3b1f255c65d87"
},
{
"name": "1.0.2zk git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/9947251413065a05189a63c9b7a6c1d4e224c21c"
},
{
"tags": [
"x_transferred"
],
"url": "http://www.openwall.com/lists/oss-security/2024/06/27/1"
},
{
"tags": [
"x_transferred"
],
"url": "http://www.openwall.com/lists/oss-security/2024/06/28/4"
},
{
"tags": [
"x_transferred"
],
"url": "https://security.netapp.com/advisory/ntap-20240712-0005/"
},
{
"url": "http://www.openwall.com/lists/oss-security/2024/08/15/1"
},
{
"url": "https://lists.debian.org/debian-lts-announce/2024/11/msg00000.html"
},
{
"url": "https://lists.debian.org/debian-lts-announce/2024/10/msg00033.html"
},
{
"url": "https://security.netapp.com/advisory/ntap-20241025-0010/"
},
{
"url": "https://security.netapp.com/advisory/ntap-20241025-0006/"
}
],
"title": "CVE Program Container"
},
{
"affected": [
{
"defaultStatus": "unknown",
"product": "RUGGEDCOM RST2428P",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 family",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE XCM-/XRM-/XCH-/XRH-300 family",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIDIS Prime",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.0.700",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V1.1.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-15T00:29:32.069Z",
"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"shortName": "siemens-SADP"
},
"references": [
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-398330.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-265688.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-915275.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-769027.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-277137.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-613116.html"
}
],
"x_adpType": "supplier"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "OpenSSL",
"vendor": "OpenSSL",
"versions": [
{
"lessThan": "3.3.2",
"status": "affected",
"version": "3.3.0",
"versionType": "semver"
},
{
"lessThan": "3.2.3",
"status": "affected",
"version": "3.2.0",
"versionType": "semver"
},
{
"lessThan": "3.1.7",
"status": "affected",
"version": "3.1.0",
"versionType": "semver"
},
{
"lessThan": "3.0.15",
"status": "affected",
"version": "3.0.0",
"versionType": "semver"
},
{
"lessThan": "1.1.1za",
"status": "affected",
"version": "1.1.1",
"versionType": "custom"
},
{
"lessThan": "1.0.2zk",
"status": "affected",
"version": "1.0.2",
"versionType": "custom"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Joseph Birr-Pixton"
},
{
"lang": "en",
"type": "analyst",
"value": "David Benjamin (Google)"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Matt Caswell"
}
],
"datePublic": "2024-06-26T23:00:00.000Z",
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an\u003cbr\u003eempty supported client protocols buffer may cause a crash or memory contents to\u003cbr\u003ebe sent to the peer.\u003cbr\u003e\u003cbr\u003eImpact summary: A buffer overread can have a range of potential consequences\u003cbr\u003esuch as unexpected application beahviour or a crash. In particular this issue\u003cbr\u003ecould result in up to 255 bytes of arbitrary private data from memory being sent\u003cbr\u003eto the peer leading to a loss of confidentiality. However, only applications\u003cbr\u003ethat directly call the SSL_select_next_proto function with a 0 length list of\u003cbr\u003esupported client protocols are affected by this issue. This would normally never\u003cbr\u003ebe a valid scenario and is typically not under attacker control but may occur by\u003cbr\u003eaccident in the case of a configuration or programming error in the calling\u003cbr\u003eapplication.\u003cbr\u003e\u003cbr\u003eThe OpenSSL API function SSL_select_next_proto is typically used by TLS\u003cbr\u003eapplications that support ALPN (Application Layer Protocol Negotiation) or NPN\u003cbr\u003e(Next Protocol Negotiation). NPN is older, was never standardised and\u003cbr\u003eis deprecated in favour of ALPN. We believe that ALPN is significantly more\u003cbr\u003ewidely deployed than NPN. The SSL_select_next_proto function accepts a list of\u003cbr\u003eprotocols from the server and a list of protocols from the client and returns\u003cbr\u003ethe first protocol that appears in the server list that also appears in the\u003cbr\u003eclient list. In the case of no overlap between the two lists it returns the\u003cbr\u003efirst item in the client list. In either case it will signal whether an overlap\u003cbr\u003ebetween the two lists was found. In the case where SSL_select_next_proto is\u003cbr\u003ecalled with a zero length client list it fails to notice this condition and\u003cbr\u003ereturns the memory immediately following the client list pointer (and reports\u003cbr\u003ethat there was no overlap in the lists).\u003cbr\u003e\u003cbr\u003eThis function is typically called from a server side application callback for\u003cbr\u003eALPN or a client side application callback for NPN. In the case of ALPN the list\u003cbr\u003eof protocols supplied by the client is guaranteed by libssl to never be zero in\u003cbr\u003elength. The list of server protocols comes from the application and should never\u003cbr\u003enormally be expected to be of zero length. In this case if the\u003cbr\u003eSSL_select_next_proto function has been called as expected (with the list\u003cbr\u003esupplied by the client passed in the client/client_len parameters), then the\u003cbr\u003eapplication will not be vulnerable to this issue. If the application has\u003cbr\u003eaccidentally been configured with a zero length server list, and has\u003cbr\u003eaccidentally passed that zero length server list in the client/client_len\u003cbr\u003eparameters, and has additionally failed to correctly handle a \"no overlap\"\u003cbr\u003eresponse (which would normally result in a handshake failure in ALPN) then it\u003cbr\u003ewill be vulnerable to this problem.\u003cbr\u003e\u003cbr\u003eIn the case of NPN, the protocol permits the client to opportunistically select\u003cbr\u003ea protocol when there is no overlap. OpenSSL returns the first client protocol\u003cbr\u003ein the no overlap case in support of this. The list of client protocols comes\u003cbr\u003efrom the application and should never normally be expected to be of zero length.\u003cbr\u003eHowever if the SSL_select_next_proto function is accidentally called with a\u003cbr\u003eclient_len of 0 then an invalid memory pointer will be returned instead. If the\u003cbr\u003eapplication uses this output as the opportunistic protocol then the loss of\u003cbr\u003econfidentiality will occur.\u003cbr\u003e\u003cbr\u003eThis issue has been assessed as Low severity because applications are most\u003cbr\u003elikely to be vulnerable if they are using NPN instead of ALPN - but NPN is not\u003cbr\u003ewidely used. It also requires an application configuration or programming error.\u003cbr\u003eFinally, this issue would not typically be under attacker control making active\u003cbr\u003eexploitation unlikely.\u003cbr\u003e\u003cbr\u003eThe FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.\u003cbr\u003e\u003cbr\u003e\n\nDue to the low severity of this issue we are not issuing new releases of\u003cbr\u003eOpenSSL at this time. The fix will be included in the next releases when they\u003cbr\u003ebecome available."
}
],
"value": "Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an\nempty supported client protocols buffer may cause a crash or memory contents to\nbe sent to the peer.\n\nImpact summary: A buffer overread can have a range of potential consequences\nsuch as unexpected application beahviour or a crash. In particular this issue\ncould result in up to 255 bytes of arbitrary private data from memory being sent\nto the peer leading to a loss of confidentiality. However, only applications\nthat directly call the SSL_select_next_proto function with a 0 length list of\nsupported client protocols are affected by this issue. This would normally never\nbe a valid scenario and is typically not under attacker control but may occur by\naccident in the case of a configuration or programming error in the calling\napplication.\n\nThe OpenSSL API function SSL_select_next_proto is typically used by TLS\napplications that support ALPN (Application Layer Protocol Negotiation) or NPN\n(Next Protocol Negotiation). NPN is older, was never standardised and\nis deprecated in favour of ALPN. We believe that ALPN is significantly more\nwidely deployed than NPN. The SSL_select_next_proto function accepts a list of\nprotocols from the server and a list of protocols from the client and returns\nthe first protocol that appears in the server list that also appears in the\nclient list. In the case of no overlap between the two lists it returns the\nfirst item in the client list. In either case it will signal whether an overlap\nbetween the two lists was found. In the case where SSL_select_next_proto is\ncalled with a zero length client list it fails to notice this condition and\nreturns the memory immediately following the client list pointer (and reports\nthat there was no overlap in the lists).\n\nThis function is typically called from a server side application callback for\nALPN or a client side application callback for NPN. In the case of ALPN the list\nof protocols supplied by the client is guaranteed by libssl to never be zero in\nlength. The list of server protocols comes from the application and should never\nnormally be expected to be of zero length. In this case if the\nSSL_select_next_proto function has been called as expected (with the list\nsupplied by the client passed in the client/client_len parameters), then the\napplication will not be vulnerable to this issue. If the application has\naccidentally been configured with a zero length server list, and has\naccidentally passed that zero length server list in the client/client_len\nparameters, and has additionally failed to correctly handle a \"no overlap\"\nresponse (which would normally result in a handshake failure in ALPN) then it\nwill be vulnerable to this problem.\n\nIn the case of NPN, the protocol permits the client to opportunistically select\na protocol when there is no overlap. OpenSSL returns the first client protocol\nin the no overlap case in support of this. The list of client protocols comes\nfrom the application and should never normally be expected to be of zero length.\nHowever if the SSL_select_next_proto function is accidentally called with a\nclient_len of 0 then an invalid memory pointer will be returned instead. If the\napplication uses this output as the opportunistic protocol then the loss of\nconfidentiality will occur.\n\nThis issue has been assessed as Low severity because applications are most\nlikely to be vulnerable if they are using NPN instead of ALPN - but NPN is not\nwidely used. It also requires an application configuration or programming error.\nFinally, this issue would not typically be under attacker control making active\nexploitation unlikely.\n\nThe FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.\n\nDue to the low severity of this issue we are not issuing new releases of\nOpenSSL at this time. The fix will be included in the next releases when they\nbecome available."
}
],
"metrics": [
{
"format": "other",
"other": {
"content": {
"text": "Low"
},
"type": "https://www.openssl.org/policies/secpolicy.html"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-125",
"description": "CWE-125 Out-of-bounds Read",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2025-09-01T08:29:27.594Z",
"orgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
"shortName": "openssl"
},
"references": [
{
"name": "OpenSSL Advisory",
"tags": [
"vendor-advisory"
],
"url": "https://www.openssl.org/news/secadv/20240627.txt"
},
{
"name": "3.3.2 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/e86ac436f0bd54d4517745483e2315650fae7b2c"
},
{
"name": "3.2.3 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/99fb785a5f85315b95288921a321a935ea29a51e"
},
{
"name": "3.1.7 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/4ada436a1946cbb24db5ab4ca082b69c1bc10f37"
},
{
"name": "3.0.15 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/cf6f91f6121f4db167405db2f0de410a456f260c"
},
{
"name": "1.1.1za git commit",
"tags": [
"patch"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/b78ec0824da857223486660177d3b1f255c65d87"
},
{
"name": "1.0.2zk git commit",
"tags": [
"patch"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/9947251413065a05189a63c9b7a6c1d4e224c21c"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "SSL_select_next_proto buffer overread",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
"assignerShortName": "openssl",
"cveId": "CVE-2024-5535",
"datePublished": "2024-06-27T10:30:53.118Z",
"dateReserved": "2024-05-30T15:34:36.813Z",
"dateUpdated": "2026-10-15T00:29:32.069Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2023-6237 (GCVE-0-2023-6237)
Vulnerability from nvd – Published: 2024-04-25 06:27 – Updated: 2026-10-14 22:15
VLAI
EPSS
VEX
Title
Excessive time spent checking invalid RSA public keys
Summary
Issue summary: Checking excessively long invalid RSA public keys may take
a long time.
Impact summary: Applications that use the function EVP_PKEY_public_check()
to check RSA public keys may experience long delays. Where the key that
is being checked has been obtained from an untrusted source this may lead
to a Denial of Service.
When function EVP_PKEY_public_check() is called on RSA public keys,
a computation is done to confirm that the RSA modulus, n, is composite.
For valid RSA keys, n is a product of two or more large primes and this
computation completes quickly. However, if n is an overly large prime,
then this computation would take a long time.
An application that calls EVP_PKEY_public_check() and supplies an RSA key
obtained from an untrusted source could be vulnerable to a Denial of Service
attack.
The function EVP_PKEY_public_check() is not called from other OpenSSL
functions however it is called from the OpenSSL pkey command line
application. For that reason that application is also vulnerable if used
with the '-pubin' and '-check' options on untrusted data.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.
Severity
5.9 (Medium)
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2024-08-20 14:44 UTC
CWE
- CWE-606 - Unchecked Input for Loop Condition
Assigner
References
10 references
Impacted products
Date Public
2024-01-15 00:00
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-02T08:21:18.096Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"name": "OpenSSL Advisory",
"tags": [
"vendor-advisory",
"x_transferred"
],
"url": "https://www.openssl.org/news/secadv/20240115.txt"
},
{
"name": "3.0.13 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/18c02492138d1eb8b6548cb26e7b625fb2414a2a"
},
{
"name": "3.1.5 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/a830f551557d3d66a84bbb18a5b889c640c36294"
},
{
"name": "3.2.1 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/0b0f7abfb37350794a4b8960fafc292cd5d1b84d"
},
{
"tags": [
"x_transferred"
],
"url": "http://www.openwall.com/lists/oss-security/2024/03/11/1"
},
{
"tags": [
"x_transferred"
],
"url": "https://security.netapp.com/advisory/ntap-20240531-0007/"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 5.9,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2023-6237",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-08-20T14:44:52.382969Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2024-11-01T14:28:51.338Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
},
{
"affected": [
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V1.1.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINEC NMS",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.0 SP1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-14T22:15:15.166Z",
"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"shortName": "siemens-SADP"
},
"references": [
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-265688.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-331112.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-915275.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-769027.html"
}
],
"x_adpType": "supplier"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "OpenSSL",
"vendor": "OpenSSL",
"versions": [
{
"lessThan": "3.0.13",
"status": "affected",
"version": "3.0.0",
"versionType": "semver"
},
{
"lessThan": "3.1.5",
"status": "affected",
"version": "3.1.0",
"versionType": "semver"
},
{
"lessThan": "3.2.1",
"status": "affected",
"version": "3.2.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"user": "00000000-0000-4000-9000-000000000000",
"value": "OSS-Fuzz"
},
{
"lang": "en",
"type": "remediation developer",
"user": "00000000-0000-4000-9000-000000000000",
"value": "Tomas Mraz"
}
],
"datePublic": "2024-01-15T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "Issue summary: Checking excessively long invalid RSA public keys may take\u003cbr\u003ea long time.\u003cbr\u003e\u003cbr\u003eImpact summary: Applications that use the function EVP_PKEY_public_check()\u003cbr\u003eto check RSA public keys may experience long delays. Where the key that\u003cbr\u003eis being checked has been obtained from an untrusted source this may lead\u003cbr\u003eto a Denial of Service.\u003cbr\u003e\u003cbr\u003eWhen function EVP_PKEY_public_check() is called on RSA public keys,\u003cbr\u003ea computation is done to confirm that the RSA modulus, n, is composite.\u003cbr\u003eFor valid RSA keys, n is a product of two or more large primes and this\u003cbr\u003ecomputation completes quickly. However, if n is an overly large prime,\u003cbr\u003ethen this computation would take a long time.\u003cbr\u003e\u003cbr\u003eAn application that calls EVP_PKEY_public_check() and supplies an RSA key\u003cbr\u003eobtained from an untrusted source could be vulnerable to a Denial of Service\u003cbr\u003eattack.\u003cbr\u003e\u003cbr\u003eThe function EVP_PKEY_public_check() is not called from other OpenSSL\u003cbr\u003efunctions however it is called from the OpenSSL pkey command line\u003cbr\u003eapplication. For that reason that application is also vulnerable if used\u003cbr\u003ewith the \u0027-pubin\u0027 and \u0027-check\u0027 options on untrusted data.\u003cbr\u003e\u003cbr\u003eThe OpenSSL SSL/TLS implementation is not affected by this issue.\u003cbr\u003e\u003cbr\u003eThe OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue."
}
],
"value": "Issue summary: Checking excessively long invalid RSA public keys may take\na long time.\n\nImpact summary: Applications that use the function EVP_PKEY_public_check()\nto check RSA public keys may experience long delays. Where the key that\nis being checked has been obtained from an untrusted source this may lead\nto a Denial of Service.\n\nWhen function EVP_PKEY_public_check() is called on RSA public keys,\na computation is done to confirm that the RSA modulus, n, is composite.\nFor valid RSA keys, n is a product of two or more large primes and this\ncomputation completes quickly. However, if n is an overly large prime,\nthen this computation would take a long time.\n\nAn application that calls EVP_PKEY_public_check() and supplies an RSA key\nobtained from an untrusted source could be vulnerable to a Denial of Service\nattack.\n\nThe function EVP_PKEY_public_check() is not called from other OpenSSL\nfunctions however it is called from the OpenSSL pkey command line\napplication. For that reason that application is also vulnerable if used\nwith the \u0027-pubin\u0027 and \u0027-check\u0027 options on untrusted data.\n\nThe OpenSSL SSL/TLS implementation is not affected by this issue.\n\nThe OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue."
}
],
"metrics": [
{
"format": "other",
"other": {
"content": {
"text": "Low"
},
"type": "https://www.openssl.org/policies/secpolicy.html"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-606",
"description": "CWE-606 Unchecked Input for Loop Condition",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2024-10-14T14:55:56.955Z",
"orgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
"shortName": "openssl"
},
"references": [
{
"name": "OpenSSL Advisory",
"tags": [
"vendor-advisory"
],
"url": "https://www.openssl.org/news/secadv/20240115.txt"
},
{
"name": "3.0.13 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/18c02492138d1eb8b6548cb26e7b625fb2414a2a"
},
{
"name": "3.1.5 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/a830f551557d3d66a84bbb18a5b889c640c36294"
},
{
"name": "3.2.1 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/0b0f7abfb37350794a4b8960fafc292cd5d1b84d"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Excessive time spent checking invalid RSA public keys",
"x_generator": {
"engine": "Vulnogram 0.1.0-dev"
}
}
},
"cveMetadata": {
"assignerOrgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
"assignerShortName": "openssl",
"cveId": "CVE-2023-6237",
"datePublished": "2024-04-25T06:27:26.990Z",
"dateReserved": "2023-11-21T10:16:34.346Z",
"dateUpdated": "2026-10-14T22:15:15.166Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2024-2511 (GCVE-0-2024-2511)
Vulnerability from nvd – Published: 2024-04-08 13:51 – Updated: 2026-10-15 00:25
VLAI
EPSS
VEX
Title
Unbounded memory growth with session handling in TLSv1.3
Summary
Issue summary: Some non-default TLS server configurations can cause unbounded
memory growth when processing TLSv1.3 sessions
Impact summary: An attacker may exploit certain server configurations to trigger
unbounded memory growth that would lead to a Denial of Service
This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is
being used (but not if early_data support is also configured and the default
anti-replay protection is in use). In this case, under certain conditions, the
session cache can get into an incorrect state and it will fail to flush properly
as it fills. The session cache will continue to grow in an unbounded manner. A
malicious client could deliberately create the scenario for this failure to
force a Denial of Service. It may also happen by accident in normal operation.
This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS
clients.
The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL
1.0.2 is also not affected by this issue.
Severity
5.9 (Medium)
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2024-04-09 15:14 UTC
CWE
- CWE-1325 - Improperly Controlled Sequential Memory Allocation
Assigner
References
15 references
Impacted products
32 products
| Vendor | Product | Version | |
|---|---|---|---|
| OpenSSL | OpenSSL |
Affected:
3.2.0 , < 3.2.2
(semver)
Affected: 3.1.0 , < 3.1.6 (semver) Affected: 3.0.0 , < 3.0.14 (semver) Affected: 1.1.1 , < 1.1.1y (custom) |
|
| Siemens | RUGGEDCOM RM1224 LTE(4G) EU |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | RUGGEDCOM RM1224 LTE(4G) NAM |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | RUGGEDCOM RST2428P |
Affected:
0 , < V3.1
(custom)
|
|
| Siemens | SCALANCE M804PB |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M812-1 ADSL-Router |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M816-1 ADSL-Router |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M826-2 SHDSL-Router |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M874-2 |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M874-3 |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M874-3 3G-Router (CN) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M876-3 |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M876-3 (ROK) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M876-4 |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M876-4 (EU) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M876-4 (NAM) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE MUM853-1 (A1) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE MUM853-1 (B1) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE MUM853-1 (EU) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE MUM856-1 (A1) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE MUM856-1 (B1) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE MUM856-1 (CN) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE MUM856-1 (EU) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE MUM856-1 (RoW) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE S615 EEC LAN-Router |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE S615 LAN-Router |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 family |
Unaffected:
0 , < *
(custom)
|
|
| Siemens | SCALANCE XCM-/XRM-/XCH-/XRH-300 family |
Affected:
0 , < V3.1
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518-4 PN/DP MFP |
Affected:
V3.1.0 , < V3.1.5
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP |
Affected:
V3.1.0 , < V3.1.5
(custom)
|
|
| Siemens | SIMATIC S7-1500 TM MFP - GNU/Linux subsystem |
Affected:
0 , < V1.1.1
(custom)
|
|
| Siemens | SIPLUS S7-1500 CPU 1518-4 PN/DP MFP |
Affected:
V3.1.0 , < V3.1.5
(custom)
|
Date Public
2024-04-08 00:00
{
"containers": {
"adp": [
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 5.9,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2024-2511",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-04-09T15:14:41.481807Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2025-03-28T19:21:08.630Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
},
{
"providerMetadata": {
"dateUpdated": "2025-11-03T21:54:02.419Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"name": "OpenSSL Advisory",
"tags": [
"vendor-advisory",
"x_transferred"
],
"url": "https://www.openssl.org/news/secadv/20240408.txt"
},
{
"name": "3.2.2 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/e9d7083e241670332e0443da0f0d4ffb52829f08"
},
{
"name": "3.1.6 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/7e4d731b1c07201ad9374c1cd9ac5263bdf35bce"
},
{
"name": "3.0.14 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/b52867a9f618bb955bed2a3ce3db4d4f97ed8e5d"
},
{
"name": "1.1.1y git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/5f8d25770ae6437db119dfc951e207271a326640"
},
{
"tags": [
"x_transferred"
],
"url": "http://www.openwall.com/lists/oss-security/2024/04/08/5"
},
{
"tags": [
"x_transferred"
],
"url": "https://security.netapp.com/advisory/ntap-20240503-0013/"
},
{
"url": "https://lists.debian.org/debian-lts-announce/2024/11/msg00000.html"
},
{
"url": "https://lists.debian.org/debian-lts-announce/2024/10/msg00033.html"
}
],
"title": "CVE Program Container"
},
{
"affected": [
{
"defaultStatus": "unknown",
"product": "RUGGEDCOM RM1224 LTE(4G) EU",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "RUGGEDCOM RM1224 LTE(4G) NAM",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "RUGGEDCOM RST2428P",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M804PB",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M812-1 ADSL-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M812-1 ADSL-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M816-1 ADSL-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M816-1 ADSL-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M826-2 SHDSL-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M874-2",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M874-3",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M874-3 3G-Router (CN)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M876-3",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M876-3 (ROK)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M876-4",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M876-4 (EU)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M876-4 (NAM)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM853-1 (A1)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM853-1 (B1)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM853-1 (EU)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM856-1 (A1)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM856-1 (B1)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM856-1 (CN)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM856-1 (EU)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM856-1 (RoW)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE S615 EEC LAN-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE S615 LAN-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 family",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE XCM-/XRM-/XCH-/XRH-300 family",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V1.1.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-15T00:25:23.074Z",
"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"shortName": "siemens-SADP"
},
"references": [
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-398330.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-265688.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-354112.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-915275.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-769027.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-613116.html"
}
],
"x_adpType": "supplier"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "OpenSSL",
"vendor": "OpenSSL",
"versions": [
{
"lessThan": "3.2.2",
"status": "affected",
"version": "3.2.0",
"versionType": "semver"
},
{
"lessThan": "3.1.6",
"status": "affected",
"version": "3.1.0",
"versionType": "semver"
},
{
"lessThan": "3.0.14",
"status": "affected",
"version": "3.0.0",
"versionType": "semver"
},
{
"lessThan": "1.1.1y",
"status": "affected",
"version": "1.1.1",
"versionType": "custom"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"user": "00000000-0000-4000-9000-000000000000",
"value": "Manish Patidar (Hewlett Packard Enterprise)"
},
{
"lang": "en",
"type": "remediation developer",
"user": "00000000-0000-4000-9000-000000000000",
"value": "Matt Caswell"
}
],
"datePublic": "2024-04-08T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "Issue summary: Some non-default TLS server configurations can cause unbounded\u003cbr\u003ememory growth when processing TLSv1.3 sessions\u003cbr\u003e\u003cbr\u003eImpact summary: An attacker may exploit certain server configurations to trigger\u003cbr\u003eunbounded memory growth that would lead to a Denial of Service\u003cbr\u003e\u003cbr\u003eThis problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is\u003cbr\u003ebeing used (but not if early_data support is also configured and the default\u003cbr\u003eanti-replay protection is in use). In this case, under certain conditions, the\u003cbr\u003esession cache can get into an incorrect state and it will fail to flush properly\u003cbr\u003eas it fills. The session cache will continue to grow in an unbounded manner. A\u003cbr\u003emalicious client could deliberately create the scenario for this failure to\u003cbr\u003eforce a Denial of Service. It may also happen by accident in normal operation.\u003cbr\u003e\u003cbr\u003eThis issue only affects TLS servers supporting TLSv1.3. It does not affect TLS\u003cbr\u003eclients.\u003cbr\u003e\u003cbr\u003eThe FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL\u003cbr\u003e1.0.2 is also not affected by this issue."
}
],
"value": "Issue summary: Some non-default TLS server configurations can cause unbounded\nmemory growth when processing TLSv1.3 sessions\n\nImpact summary: An attacker may exploit certain server configurations to trigger\nunbounded memory growth that would lead to a Denial of Service\n\nThis problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is\nbeing used (but not if early_data support is also configured and the default\nanti-replay protection is in use). In this case, under certain conditions, the\nsession cache can get into an incorrect state and it will fail to flush properly\nas it fills. The session cache will continue to grow in an unbounded manner. A\nmalicious client could deliberately create the scenario for this failure to\nforce a Denial of Service. It may also happen by accident in normal operation.\n\nThis issue only affects TLS servers supporting TLSv1.3. It does not affect TLS\nclients.\n\nThe FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL\n1.0.2 is also not affected by this issue."
}
],
"metrics": [
{
"format": "other",
"other": {
"content": {
"text": "Low"
},
"type": "https://www.openssl.org/policies/secpolicy.html"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-1325",
"description": "CWE-1325 Improperly Controlled Sequential Memory Allocation",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2024-10-14T14:56:00.208Z",
"orgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
"shortName": "openssl"
},
"references": [
{
"name": "OpenSSL Advisory",
"tags": [
"vendor-advisory"
],
"url": "https://www.openssl.org/news/secadv/20240408.txt"
},
{
"name": "3.2.2 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/e9d7083e241670332e0443da0f0d4ffb52829f08"
},
{
"name": "3.1.6 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/7e4d731b1c07201ad9374c1cd9ac5263bdf35bce"
},
{
"name": "3.0.14 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/b52867a9f618bb955bed2a3ce3db4d4f97ed8e5d"
},
{
"name": "1.1.1y git commit",
"tags": [
"patch"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/5f8d25770ae6437db119dfc951e207271a326640"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Unbounded memory growth with session handling in TLSv1.3",
"x_generator": {
"engine": "Vulnogram 0.1.0-dev"
}
}
},
"cveMetadata": {
"assignerOrgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
"assignerShortName": "openssl",
"cveId": "CVE-2024-2511",
"datePublished": "2024-04-08T13:51:12.349Z",
"dateReserved": "2024-03-15T15:33:52.037Z",
"dateUpdated": "2026-10-15T00:25:23.074Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2024-9143 (GCVE-0-2024-9143)
Vulnerability from cvelistv5 – Published: 2024-10-16 17:09 – Updated: 2026-11-06 21:35
VLAI
EPSS
VEX
Title
Low-level invalid GF(2^m) parameters lead to OOB memory access
Summary
Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted
explicit values for the field polynomial can lead to out-of-bounds memory reads
or writes.
Impact summary: Out of bound memory writes can lead to an application crash or
even a possibility of a remote code execution, however, in all the protocols
involving Elliptic Curve Cryptography that we're aware of, either only "named
curves" are supported, or, if explicit curve parameters are supported, they
specify an X9.62 encoding of binary (GF(2^m)) curves that can't represent
problematic input values. Thus the likelihood of existence of a vulnerable
application is low.
In particular, the X9.62 encoding is used for ECC keys in X.509 certificates,
so problematic inputs cannot occur in the context of processing X.509
certificates. Any problematic use-cases would have to be using an "exotic"
curve encoding.
The affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(),
and various supporting BN_GF2m_*() functions.
Applications working with "exotic" explicit binary (GF(2^m)) curve parameters,
that make it possible to represent invalid field polynomials with a zero
constant term, via the above or similar APIs, may terminate abruptly as a
result of reading or writing outside of array bounds. Remote code execution
cannot easily be ruled out.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.
Severity
8.8 (High)
SSVC
Exploitation: none
Automatable: no
Technical Impact: total
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-11-06 21:35 UTC
Assigner
References
17 references
Impacted products
6 products
| Vendor | Product | Version | |
|---|---|---|---|
| OpenSSL | OpenSSL |
Affected:
3.3.0 , < 3.3.3
(semver)
Affected: 3.2.0 , < 3.2.4 (semver) Affected: 3.1.0 , < 3.1.8 (semver) Affected: 3.0.0 , < 3.0.16 (semver) Affected: 1.1.1 , < 1.1.1zb (custom) Affected: 1.0.2 , < 1.0.2zl (custom) |
|
| Siemens | SIDIS Prime |
Affected:
0 , < V4.0.700
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518-4 PN/DP MFP |
Affected:
V3.1.0 , < V3.1.5
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP |
Affected:
V3.1.0 , < V3.1.5
(custom)
|
|
| Siemens | SIMATIC S7-1500 TM MFP - GNU/Linux subsystem |
Affected:
0 , < V1.1.1
(custom)
|
|
| Siemens | SIPLUS S7-1500 CPU 1518-4 PN/DP MFP |
Affected:
V3.1.0 , < V3.1.5
(custom)
|
Date Public
2024-10-16 14:00
{
"containers": {
"adp": [
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 8.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2024-9143",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-06T21:35:52.868340Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-06T21:35:56.608Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
},
{
"providerMetadata": {
"dateUpdated": "2025-11-03T22:33:18.178Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2024/10/16/1"
},
{
"url": "http://www.openwall.com/lists/oss-security/2024/10/23/1"
},
{
"url": "http://www.openwall.com/lists/oss-security/2024/10/24/1"
},
{
"url": "https://security.netapp.com/advisory/ntap-20241101-0001/"
},
{
"url": "https://lists.debian.org/debian-lts-announce/2024/11/msg00000.html"
},
{
"url": "https://lists.debian.org/debian-lts-announce/2024/10/msg00033.html"
}
],
"title": "CVE Program Container"
},
{
"affected": [
{
"defaultStatus": "unknown",
"product": "SIDIS Prime",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.0.700",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V1.1.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-15T00:37:50.974Z",
"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"shortName": "siemens-SADP"
},
"references": [
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-398330.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-265688.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-769027.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-277137.html"
}
],
"x_adpType": "supplier"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "OpenSSL",
"vendor": "OpenSSL",
"versions": [
{
"lessThan": "3.3.3",
"status": "affected",
"version": "3.3.0",
"versionType": "semver"
},
{
"lessThan": "3.2.4",
"status": "affected",
"version": "3.2.0",
"versionType": "semver"
},
{
"lessThan": "3.1.8",
"status": "affected",
"version": "3.1.0",
"versionType": "semver"
},
{
"lessThan": "3.0.16",
"status": "affected",
"version": "3.0.0",
"versionType": "semver"
},
{
"lessThan": "1.1.1zb",
"status": "affected",
"version": "1.1.1",
"versionType": "custom"
},
{
"lessThan": "1.0.2zl",
"status": "affected",
"version": "1.0.2",
"versionType": "custom"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Google OSS-Fuzz-Gen"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Viktor Dukhovni"
}
],
"datePublic": "2024-10-16T14:00:00.000Z",
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted\u003cbr\u003eexplicit values for the field polynomial can lead to out-of-bounds memory reads\u003cbr\u003eor writes.\u003cbr\u003e\u003cbr\u003eImpact summary: Out of bound memory writes can lead to an application crash or\u003cbr\u003eeven a possibility of a remote code execution, however, in all the protocols\u003cbr\u003einvolving Elliptic Curve Cryptography that we\u0027re aware of, either only \"named\u003cbr\u003ecurves\" are supported, or, if explicit curve parameters are supported, they\u003cbr\u003especify an X9.62 encoding of binary (GF(2^m)) curves that can\u0027t represent\u003cbr\u003eproblematic input values. Thus the likelihood of existence of a vulnerable\u003cbr\u003eapplication is low.\u003cbr\u003e\u003cbr\u003eIn particular, the X9.62 encoding is used for ECC keys in X.509 certificates,\u003cbr\u003eso problematic inputs cannot occur in the context of processing X.509\u003cbr\u003ecertificates. Any problematic use-cases would have to be using an \"exotic\"\u003cbr\u003ecurve encoding.\u003cbr\u003e\u003cbr\u003eThe affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(),\u003cbr\u003eand various supporting BN_GF2m_*() functions.\u003cbr\u003e\u003cbr\u003eApplications working with \"exotic\" explicit binary (GF(2^m)) curve parameters,\u003cbr\u003ethat make it possible to represent invalid field polynomials with a zero\u003cbr\u003econstant term, via the above or similar APIs, may terminate abruptly as a\u003cbr\u003eresult of reading or writing outside of array bounds. Remote code execution\u003cbr\u003ecannot easily be ruled out.\u003cbr\u003e\u003cbr\u003eThe FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue."
}
],
"value": "Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted\nexplicit values for the field polynomial can lead to out-of-bounds memory reads\nor writes.\n\nImpact summary: Out of bound memory writes can lead to an application crash or\neven a possibility of a remote code execution, however, in all the protocols\ninvolving Elliptic Curve Cryptography that we\u0027re aware of, either only \"named\ncurves\" are supported, or, if explicit curve parameters are supported, they\nspecify an X9.62 encoding of binary (GF(2^m)) curves that can\u0027t represent\nproblematic input values. Thus the likelihood of existence of a vulnerable\napplication is low.\n\nIn particular, the X9.62 encoding is used for ECC keys in X.509 certificates,\nso problematic inputs cannot occur in the context of processing X.509\ncertificates. Any problematic use-cases would have to be using an \"exotic\"\ncurve encoding.\n\nThe affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(),\nand various supporting BN_GF2m_*() functions.\n\nApplications working with \"exotic\" explicit binary (GF(2^m)) curve parameters,\nthat make it possible to represent invalid field polynomials with a zero\nconstant term, via the above or similar APIs, may terminate abruptly as a\nresult of reading or writing outside of array bounds. Remote code execution\ncannot easily be ruled out.\n\nThe FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue."
}
],
"metrics": [
{
"format": "other",
"other": {
"content": {
"text": "Low"
},
"type": "https://openssl-library.org/policies/general/security-policy/"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-125",
"description": "CWE-125 Out-of-bounds Read",
"lang": "en",
"type": "CWE"
},
{
"cweId": "CWE-787",
"description": "CWE-787 Out-of-bounds Write",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2025-09-01T08:29:10.392Z",
"orgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
"shortName": "openssl"
},
"references": [
{
"name": "OpenSSL Advisory",
"tags": [
"vendor-advisory"
],
"url": "https://openssl-library.org/news/secadv/20241016.txt"
},
{
"name": "3.3.3 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/c0d3e4d32d2805f49bec30547f225bc4d092e1f4"
},
{
"name": "3.2.4 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/bc7e04d7c8d509fb78fc0e285aa948fb0da04700"
},
{
"name": "3.1.8 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/fdf6723362ca51bd883295efe206cb5b1cfa5154"
},
{
"name": "3.0.16 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/72ae83ad214d2eef262461365a1975707f862712"
},
{
"name": "1.1.1zb git commit",
"tags": [
"patch"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/8efc0cbaa8ebba8e116f7b81a876a4123594d86a"
},
{
"name": "1.0.2zl git commit",
"tags": [
"patch"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/9d576994cec2b7aa37a91740ea7e680810957e41"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Low-level invalid GF(2^m) parameters lead to OOB memory access",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
"assignerShortName": "openssl",
"cveId": "CVE-2024-9143",
"datePublished": "2024-10-16T17:09:23.844Z",
"dateReserved": "2024-09-24T08:37:04.834Z",
"dateUpdated": "2026-11-06T21:35:56.608Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2024-5535 (GCVE-0-2024-5535)
Vulnerability from cvelistv5 – Published: 2024-06-27 10:30 – Updated: 2026-10-15 00:29
VLAI
EPSS
VEX
Title
SSL_select_next_proto buffer overread
Summary
Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an
empty supported client protocols buffer may cause a crash or memory contents to
be sent to the peer.
Impact summary: A buffer overread can have a range of potential consequences
such as unexpected application beahviour or a crash. In particular this issue
could result in up to 255 bytes of arbitrary private data from memory being sent
to the peer leading to a loss of confidentiality. However, only applications
that directly call the SSL_select_next_proto function with a 0 length list of
supported client protocols are affected by this issue. This would normally never
be a valid scenario and is typically not under attacker control but may occur by
accident in the case of a configuration or programming error in the calling
application.
The OpenSSL API function SSL_select_next_proto is typically used by TLS
applications that support ALPN (Application Layer Protocol Negotiation) or NPN
(Next Protocol Negotiation). NPN is older, was never standardised and
is deprecated in favour of ALPN. We believe that ALPN is significantly more
widely deployed than NPN. The SSL_select_next_proto function accepts a list of
protocols from the server and a list of protocols from the client and returns
the first protocol that appears in the server list that also appears in the
client list. In the case of no overlap between the two lists it returns the
first item in the client list. In either case it will signal whether an overlap
between the two lists was found. In the case where SSL_select_next_proto is
called with a zero length client list it fails to notice this condition and
returns the memory immediately following the client list pointer (and reports
that there was no overlap in the lists).
This function is typically called from a server side application callback for
ALPN or a client side application callback for NPN. In the case of ALPN the list
of protocols supplied by the client is guaranteed by libssl to never be zero in
length. The list of server protocols comes from the application and should never
normally be expected to be of zero length. In this case if the
SSL_select_next_proto function has been called as expected (with the list
supplied by the client passed in the client/client_len parameters), then the
application will not be vulnerable to this issue. If the application has
accidentally been configured with a zero length server list, and has
accidentally passed that zero length server list in the client/client_len
parameters, and has additionally failed to correctly handle a "no overlap"
response (which would normally result in a handshake failure in ALPN) then it
will be vulnerable to this problem.
In the case of NPN, the protocol permits the client to opportunistically select
a protocol when there is no overlap. OpenSSL returns the first client protocol
in the no overlap case in support of this. The list of client protocols comes
from the application and should never normally be expected to be of zero length.
However if the SSL_select_next_proto function is accidentally called with a
client_len of 0 then an invalid memory pointer will be returned instead. If the
application uses this output as the opportunistic protocol then the loss of
confidentiality will occur.
This issue has been assessed as Low severity because applications are most
likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not
widely used. It also requires an application configuration or programming error.
Finally, this issue would not typically be under attacker control making active
exploitation unlikely.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.
Due to the low severity of this issue we are not issuing new releases of
OpenSSL at this time. The fix will be included in the next releases when they
become available.
Severity
9.1 (Critical)
SSVC
Exploitation: none
Automatable: yes
Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2024-11-08 00:00 UTC
CWE
- CWE-125 - Out-of-bounds Read
Assigner
References
21 references
Impacted products
10 products
| Vendor | Product | Version | |
|---|---|---|---|
| OpenSSL | OpenSSL |
Affected:
3.3.0 , < 3.3.2
(semver)
Affected: 3.2.0 , < 3.2.3 (semver) Affected: 3.1.0 , < 3.1.7 (semver) Affected: 3.0.0 , < 3.0.15 (semver) Affected: 1.1.1 , < 1.1.1za (custom) Affected: 1.0.2 , < 1.0.2zk (custom) |
|
| openssl | openssl |
Affected:
3.3.0 , < 3.3.2
(custom)
Affected: 3.2.0 , < 3.2.3 (custom) Affected: 3.1.0 , < 3.1.7 (custom) Affected: 3.0.0 , < 3.0.15 (custom) Affected: 1.1.1 , < 1.1.1za (custom) Affected: 1.0.2 , < 1.0.2zk (custom) cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:* |
|
| Siemens | RUGGEDCOM RST2428P |
Affected:
0 , < V3.1
(custom)
|
|
| Siemens | SCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 family |
Unaffected:
0 , < *
(custom)
|
|
| Siemens | SCALANCE XCM-/XRM-/XCH-/XRH-300 family |
Affected:
0 , < V3.1
(custom)
|
|
| Siemens | SIDIS Prime |
Affected:
0 , < V4.0.700
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518-4 PN/DP MFP |
Affected:
V3.1.0 , < V3.1.5
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP |
Affected:
V3.1.0 , < V3.1.5
(custom)
|
|
| Siemens | SIMATIC S7-1500 TM MFP - GNU/Linux subsystem |
Affected:
0 , < V1.1.1
(custom)
|
|
| Siemens | SIPLUS S7-1500 CPU 1518-4 PN/DP MFP |
Affected:
V3.1.0 , < V3.1.5
(custom)
|
Date Public
2024-06-26 23:00
{
"containers": {
"adp": [
{
"affected": [
{
"cpes": [
"cpe:2.3:a:openssl:openssl:*:*:*:*:*:*:*:*"
],
"defaultStatus": "unknown",
"product": "openssl",
"vendor": "openssl",
"versions": [
{
"lessThan": "3.3.2",
"status": "affected",
"version": "3.3.0",
"versionType": "custom"
},
{
"lessThan": "3.2.3",
"status": "affected",
"version": "3.2.0",
"versionType": "custom"
},
{
"lessThan": "3.1.7",
"status": "affected",
"version": "3.1.0",
"versionType": "custom"
},
{
"lessThan": "3.0.15",
"status": "affected",
"version": "3.0.0",
"versionType": "custom"
},
{
"lessThan": "1.1.1za",
"status": "affected",
"version": "1.1.1",
"versionType": "custom"
},
{
"lessThan": "1.0.2zk",
"status": "affected",
"version": "1.0.2",
"versionType": "custom"
}
]
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 9.1,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "HIGH",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2024-5535",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-11-08T00:00:00+00:00",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2024-11-14T04:55:17.007Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
},
{
"providerMetadata": {
"dateUpdated": "2025-11-03T22:32:30.900Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"name": "OpenSSL Advisory",
"tags": [
"vendor-advisory",
"x_transferred"
],
"url": "https://www.openssl.org/news/secadv/20240627.txt"
},
{
"name": "3.3.2 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/e86ac436f0bd54d4517745483e2315650fae7b2c"
},
{
"name": "3.2.3 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/99fb785a5f85315b95288921a321a935ea29a51e"
},
{
"name": "3.1.7 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/4ada436a1946cbb24db5ab4ca082b69c1bc10f37"
},
{
"name": "3.0.15 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/cf6f91f6121f4db167405db2f0de410a456f260c"
},
{
"name": "1.1.1za git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/b78ec0824da857223486660177d3b1f255c65d87"
},
{
"name": "1.0.2zk git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/9947251413065a05189a63c9b7a6c1d4e224c21c"
},
{
"tags": [
"x_transferred"
],
"url": "http://www.openwall.com/lists/oss-security/2024/06/27/1"
},
{
"tags": [
"x_transferred"
],
"url": "http://www.openwall.com/lists/oss-security/2024/06/28/4"
},
{
"tags": [
"x_transferred"
],
"url": "https://security.netapp.com/advisory/ntap-20240712-0005/"
},
{
"url": "http://www.openwall.com/lists/oss-security/2024/08/15/1"
},
{
"url": "https://lists.debian.org/debian-lts-announce/2024/11/msg00000.html"
},
{
"url": "https://lists.debian.org/debian-lts-announce/2024/10/msg00033.html"
},
{
"url": "https://security.netapp.com/advisory/ntap-20241025-0010/"
},
{
"url": "https://security.netapp.com/advisory/ntap-20241025-0006/"
}
],
"title": "CVE Program Container"
},
{
"affected": [
{
"defaultStatus": "unknown",
"product": "RUGGEDCOM RST2428P",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 family",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE XCM-/XRM-/XCH-/XRH-300 family",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIDIS Prime",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.0.700",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V1.1.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-15T00:29:32.069Z",
"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"shortName": "siemens-SADP"
},
"references": [
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-398330.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-265688.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-915275.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-769027.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-277137.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-613116.html"
}
],
"x_adpType": "supplier"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "OpenSSL",
"vendor": "OpenSSL",
"versions": [
{
"lessThan": "3.3.2",
"status": "affected",
"version": "3.3.0",
"versionType": "semver"
},
{
"lessThan": "3.2.3",
"status": "affected",
"version": "3.2.0",
"versionType": "semver"
},
{
"lessThan": "3.1.7",
"status": "affected",
"version": "3.1.0",
"versionType": "semver"
},
{
"lessThan": "3.0.15",
"status": "affected",
"version": "3.0.0",
"versionType": "semver"
},
{
"lessThan": "1.1.1za",
"status": "affected",
"version": "1.1.1",
"versionType": "custom"
},
{
"lessThan": "1.0.2zk",
"status": "affected",
"version": "1.0.2",
"versionType": "custom"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Joseph Birr-Pixton"
},
{
"lang": "en",
"type": "analyst",
"value": "David Benjamin (Google)"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Matt Caswell"
}
],
"datePublic": "2024-06-26T23:00:00.000Z",
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an\u003cbr\u003eempty supported client protocols buffer may cause a crash or memory contents to\u003cbr\u003ebe sent to the peer.\u003cbr\u003e\u003cbr\u003eImpact summary: A buffer overread can have a range of potential consequences\u003cbr\u003esuch as unexpected application beahviour or a crash. In particular this issue\u003cbr\u003ecould result in up to 255 bytes of arbitrary private data from memory being sent\u003cbr\u003eto the peer leading to a loss of confidentiality. However, only applications\u003cbr\u003ethat directly call the SSL_select_next_proto function with a 0 length list of\u003cbr\u003esupported client protocols are affected by this issue. This would normally never\u003cbr\u003ebe a valid scenario and is typically not under attacker control but may occur by\u003cbr\u003eaccident in the case of a configuration or programming error in the calling\u003cbr\u003eapplication.\u003cbr\u003e\u003cbr\u003eThe OpenSSL API function SSL_select_next_proto is typically used by TLS\u003cbr\u003eapplications that support ALPN (Application Layer Protocol Negotiation) or NPN\u003cbr\u003e(Next Protocol Negotiation). NPN is older, was never standardised and\u003cbr\u003eis deprecated in favour of ALPN. We believe that ALPN is significantly more\u003cbr\u003ewidely deployed than NPN. The SSL_select_next_proto function accepts a list of\u003cbr\u003eprotocols from the server and a list of protocols from the client and returns\u003cbr\u003ethe first protocol that appears in the server list that also appears in the\u003cbr\u003eclient list. In the case of no overlap between the two lists it returns the\u003cbr\u003efirst item in the client list. In either case it will signal whether an overlap\u003cbr\u003ebetween the two lists was found. In the case where SSL_select_next_proto is\u003cbr\u003ecalled with a zero length client list it fails to notice this condition and\u003cbr\u003ereturns the memory immediately following the client list pointer (and reports\u003cbr\u003ethat there was no overlap in the lists).\u003cbr\u003e\u003cbr\u003eThis function is typically called from a server side application callback for\u003cbr\u003eALPN or a client side application callback for NPN. In the case of ALPN the list\u003cbr\u003eof protocols supplied by the client is guaranteed by libssl to never be zero in\u003cbr\u003elength. The list of server protocols comes from the application and should never\u003cbr\u003enormally be expected to be of zero length. In this case if the\u003cbr\u003eSSL_select_next_proto function has been called as expected (with the list\u003cbr\u003esupplied by the client passed in the client/client_len parameters), then the\u003cbr\u003eapplication will not be vulnerable to this issue. If the application has\u003cbr\u003eaccidentally been configured with a zero length server list, and has\u003cbr\u003eaccidentally passed that zero length server list in the client/client_len\u003cbr\u003eparameters, and has additionally failed to correctly handle a \"no overlap\"\u003cbr\u003eresponse (which would normally result in a handshake failure in ALPN) then it\u003cbr\u003ewill be vulnerable to this problem.\u003cbr\u003e\u003cbr\u003eIn the case of NPN, the protocol permits the client to opportunistically select\u003cbr\u003ea protocol when there is no overlap. OpenSSL returns the first client protocol\u003cbr\u003ein the no overlap case in support of this. The list of client protocols comes\u003cbr\u003efrom the application and should never normally be expected to be of zero length.\u003cbr\u003eHowever if the SSL_select_next_proto function is accidentally called with a\u003cbr\u003eclient_len of 0 then an invalid memory pointer will be returned instead. If the\u003cbr\u003eapplication uses this output as the opportunistic protocol then the loss of\u003cbr\u003econfidentiality will occur.\u003cbr\u003e\u003cbr\u003eThis issue has been assessed as Low severity because applications are most\u003cbr\u003elikely to be vulnerable if they are using NPN instead of ALPN - but NPN is not\u003cbr\u003ewidely used. It also requires an application configuration or programming error.\u003cbr\u003eFinally, this issue would not typically be under attacker control making active\u003cbr\u003eexploitation unlikely.\u003cbr\u003e\u003cbr\u003eThe FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.\u003cbr\u003e\u003cbr\u003e\n\nDue to the low severity of this issue we are not issuing new releases of\u003cbr\u003eOpenSSL at this time. The fix will be included in the next releases when they\u003cbr\u003ebecome available."
}
],
"value": "Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an\nempty supported client protocols buffer may cause a crash or memory contents to\nbe sent to the peer.\n\nImpact summary: A buffer overread can have a range of potential consequences\nsuch as unexpected application beahviour or a crash. In particular this issue\ncould result in up to 255 bytes of arbitrary private data from memory being sent\nto the peer leading to a loss of confidentiality. However, only applications\nthat directly call the SSL_select_next_proto function with a 0 length list of\nsupported client protocols are affected by this issue. This would normally never\nbe a valid scenario and is typically not under attacker control but may occur by\naccident in the case of a configuration or programming error in the calling\napplication.\n\nThe OpenSSL API function SSL_select_next_proto is typically used by TLS\napplications that support ALPN (Application Layer Protocol Negotiation) or NPN\n(Next Protocol Negotiation). NPN is older, was never standardised and\nis deprecated in favour of ALPN. We believe that ALPN is significantly more\nwidely deployed than NPN. The SSL_select_next_proto function accepts a list of\nprotocols from the server and a list of protocols from the client and returns\nthe first protocol that appears in the server list that also appears in the\nclient list. In the case of no overlap between the two lists it returns the\nfirst item in the client list. In either case it will signal whether an overlap\nbetween the two lists was found. In the case where SSL_select_next_proto is\ncalled with a zero length client list it fails to notice this condition and\nreturns the memory immediately following the client list pointer (and reports\nthat there was no overlap in the lists).\n\nThis function is typically called from a server side application callback for\nALPN or a client side application callback for NPN. In the case of ALPN the list\nof protocols supplied by the client is guaranteed by libssl to never be zero in\nlength. The list of server protocols comes from the application and should never\nnormally be expected to be of zero length. In this case if the\nSSL_select_next_proto function has been called as expected (with the list\nsupplied by the client passed in the client/client_len parameters), then the\napplication will not be vulnerable to this issue. If the application has\naccidentally been configured with a zero length server list, and has\naccidentally passed that zero length server list in the client/client_len\nparameters, and has additionally failed to correctly handle a \"no overlap\"\nresponse (which would normally result in a handshake failure in ALPN) then it\nwill be vulnerable to this problem.\n\nIn the case of NPN, the protocol permits the client to opportunistically select\na protocol when there is no overlap. OpenSSL returns the first client protocol\nin the no overlap case in support of this. The list of client protocols comes\nfrom the application and should never normally be expected to be of zero length.\nHowever if the SSL_select_next_proto function is accidentally called with a\nclient_len of 0 then an invalid memory pointer will be returned instead. If the\napplication uses this output as the opportunistic protocol then the loss of\nconfidentiality will occur.\n\nThis issue has been assessed as Low severity because applications are most\nlikely to be vulnerable if they are using NPN instead of ALPN - but NPN is not\nwidely used. It also requires an application configuration or programming error.\nFinally, this issue would not typically be under attacker control making active\nexploitation unlikely.\n\nThe FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.\n\nDue to the low severity of this issue we are not issuing new releases of\nOpenSSL at this time. The fix will be included in the next releases when they\nbecome available."
}
],
"metrics": [
{
"format": "other",
"other": {
"content": {
"text": "Low"
},
"type": "https://www.openssl.org/policies/secpolicy.html"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-125",
"description": "CWE-125 Out-of-bounds Read",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2025-09-01T08:29:27.594Z",
"orgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
"shortName": "openssl"
},
"references": [
{
"name": "OpenSSL Advisory",
"tags": [
"vendor-advisory"
],
"url": "https://www.openssl.org/news/secadv/20240627.txt"
},
{
"name": "3.3.2 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/e86ac436f0bd54d4517745483e2315650fae7b2c"
},
{
"name": "3.2.3 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/99fb785a5f85315b95288921a321a935ea29a51e"
},
{
"name": "3.1.7 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/4ada436a1946cbb24db5ab4ca082b69c1bc10f37"
},
{
"name": "3.0.15 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/cf6f91f6121f4db167405db2f0de410a456f260c"
},
{
"name": "1.1.1za git commit",
"tags": [
"patch"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/b78ec0824da857223486660177d3b1f255c65d87"
},
{
"name": "1.0.2zk git commit",
"tags": [
"patch"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/9947251413065a05189a63c9b7a6c1d4e224c21c"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "SSL_select_next_proto buffer overread",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
"assignerShortName": "openssl",
"cveId": "CVE-2024-5535",
"datePublished": "2024-06-27T10:30:53.118Z",
"dateReserved": "2024-05-30T15:34:36.813Z",
"dateUpdated": "2026-10-15T00:29:32.069Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2023-6237 (GCVE-0-2023-6237)
Vulnerability from cvelistv5 – Published: 2024-04-25 06:27 – Updated: 2026-10-14 22:15
VLAI
EPSS
VEX
Title
Excessive time spent checking invalid RSA public keys
Summary
Issue summary: Checking excessively long invalid RSA public keys may take
a long time.
Impact summary: Applications that use the function EVP_PKEY_public_check()
to check RSA public keys may experience long delays. Where the key that
is being checked has been obtained from an untrusted source this may lead
to a Denial of Service.
When function EVP_PKEY_public_check() is called on RSA public keys,
a computation is done to confirm that the RSA modulus, n, is composite.
For valid RSA keys, n is a product of two or more large primes and this
computation completes quickly. However, if n is an overly large prime,
then this computation would take a long time.
An application that calls EVP_PKEY_public_check() and supplies an RSA key
obtained from an untrusted source could be vulnerable to a Denial of Service
attack.
The function EVP_PKEY_public_check() is not called from other OpenSSL
functions however it is called from the OpenSSL pkey command line
application. For that reason that application is also vulnerable if used
with the '-pubin' and '-check' options on untrusted data.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.
Severity
5.9 (Medium)
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2024-08-20 14:44 UTC
CWE
- CWE-606 - Unchecked Input for Loop Condition
Assigner
References
10 references
Impacted products
Date Public
2024-01-15 00:00
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-02T08:21:18.096Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"name": "OpenSSL Advisory",
"tags": [
"vendor-advisory",
"x_transferred"
],
"url": "https://www.openssl.org/news/secadv/20240115.txt"
},
{
"name": "3.0.13 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/18c02492138d1eb8b6548cb26e7b625fb2414a2a"
},
{
"name": "3.1.5 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/a830f551557d3d66a84bbb18a5b889c640c36294"
},
{
"name": "3.2.1 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/0b0f7abfb37350794a4b8960fafc292cd5d1b84d"
},
{
"tags": [
"x_transferred"
],
"url": "http://www.openwall.com/lists/oss-security/2024/03/11/1"
},
{
"tags": [
"x_transferred"
],
"url": "https://security.netapp.com/advisory/ntap-20240531-0007/"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 5.9,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2023-6237",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-08-20T14:44:52.382969Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2024-11-01T14:28:51.338Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
},
{
"affected": [
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V1.1.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINEC NMS",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.0 SP1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-14T22:15:15.166Z",
"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"shortName": "siemens-SADP"
},
"references": [
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-265688.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-331112.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-915275.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-769027.html"
}
],
"x_adpType": "supplier"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "OpenSSL",
"vendor": "OpenSSL",
"versions": [
{
"lessThan": "3.0.13",
"status": "affected",
"version": "3.0.0",
"versionType": "semver"
},
{
"lessThan": "3.1.5",
"status": "affected",
"version": "3.1.0",
"versionType": "semver"
},
{
"lessThan": "3.2.1",
"status": "affected",
"version": "3.2.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"user": "00000000-0000-4000-9000-000000000000",
"value": "OSS-Fuzz"
},
{
"lang": "en",
"type": "remediation developer",
"user": "00000000-0000-4000-9000-000000000000",
"value": "Tomas Mraz"
}
],
"datePublic": "2024-01-15T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "Issue summary: Checking excessively long invalid RSA public keys may take\u003cbr\u003ea long time.\u003cbr\u003e\u003cbr\u003eImpact summary: Applications that use the function EVP_PKEY_public_check()\u003cbr\u003eto check RSA public keys may experience long delays. Where the key that\u003cbr\u003eis being checked has been obtained from an untrusted source this may lead\u003cbr\u003eto a Denial of Service.\u003cbr\u003e\u003cbr\u003eWhen function EVP_PKEY_public_check() is called on RSA public keys,\u003cbr\u003ea computation is done to confirm that the RSA modulus, n, is composite.\u003cbr\u003eFor valid RSA keys, n is a product of two or more large primes and this\u003cbr\u003ecomputation completes quickly. However, if n is an overly large prime,\u003cbr\u003ethen this computation would take a long time.\u003cbr\u003e\u003cbr\u003eAn application that calls EVP_PKEY_public_check() and supplies an RSA key\u003cbr\u003eobtained from an untrusted source could be vulnerable to a Denial of Service\u003cbr\u003eattack.\u003cbr\u003e\u003cbr\u003eThe function EVP_PKEY_public_check() is not called from other OpenSSL\u003cbr\u003efunctions however it is called from the OpenSSL pkey command line\u003cbr\u003eapplication. For that reason that application is also vulnerable if used\u003cbr\u003ewith the \u0027-pubin\u0027 and \u0027-check\u0027 options on untrusted data.\u003cbr\u003e\u003cbr\u003eThe OpenSSL SSL/TLS implementation is not affected by this issue.\u003cbr\u003e\u003cbr\u003eThe OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue."
}
],
"value": "Issue summary: Checking excessively long invalid RSA public keys may take\na long time.\n\nImpact summary: Applications that use the function EVP_PKEY_public_check()\nto check RSA public keys may experience long delays. Where the key that\nis being checked has been obtained from an untrusted source this may lead\nto a Denial of Service.\n\nWhen function EVP_PKEY_public_check() is called on RSA public keys,\na computation is done to confirm that the RSA modulus, n, is composite.\nFor valid RSA keys, n is a product of two or more large primes and this\ncomputation completes quickly. However, if n is an overly large prime,\nthen this computation would take a long time.\n\nAn application that calls EVP_PKEY_public_check() and supplies an RSA key\nobtained from an untrusted source could be vulnerable to a Denial of Service\nattack.\n\nThe function EVP_PKEY_public_check() is not called from other OpenSSL\nfunctions however it is called from the OpenSSL pkey command line\napplication. For that reason that application is also vulnerable if used\nwith the \u0027-pubin\u0027 and \u0027-check\u0027 options on untrusted data.\n\nThe OpenSSL SSL/TLS implementation is not affected by this issue.\n\nThe OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue."
}
],
"metrics": [
{
"format": "other",
"other": {
"content": {
"text": "Low"
},
"type": "https://www.openssl.org/policies/secpolicy.html"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-606",
"description": "CWE-606 Unchecked Input for Loop Condition",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2024-10-14T14:55:56.955Z",
"orgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
"shortName": "openssl"
},
"references": [
{
"name": "OpenSSL Advisory",
"tags": [
"vendor-advisory"
],
"url": "https://www.openssl.org/news/secadv/20240115.txt"
},
{
"name": "3.0.13 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/18c02492138d1eb8b6548cb26e7b625fb2414a2a"
},
{
"name": "3.1.5 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/a830f551557d3d66a84bbb18a5b889c640c36294"
},
{
"name": "3.2.1 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/0b0f7abfb37350794a4b8960fafc292cd5d1b84d"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Excessive time spent checking invalid RSA public keys",
"x_generator": {
"engine": "Vulnogram 0.1.0-dev"
}
}
},
"cveMetadata": {
"assignerOrgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
"assignerShortName": "openssl",
"cveId": "CVE-2023-6237",
"datePublished": "2024-04-25T06:27:26.990Z",
"dateReserved": "2023-11-21T10:16:34.346Z",
"dateUpdated": "2026-10-14T22:15:15.166Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2024-2511 (GCVE-0-2024-2511)
Vulnerability from cvelistv5 – Published: 2024-04-08 13:51 – Updated: 2026-10-15 00:25
VLAI
EPSS
VEX
Title
Unbounded memory growth with session handling in TLSv1.3
Summary
Issue summary: Some non-default TLS server configurations can cause unbounded
memory growth when processing TLSv1.3 sessions
Impact summary: An attacker may exploit certain server configurations to trigger
unbounded memory growth that would lead to a Denial of Service
This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is
being used (but not if early_data support is also configured and the default
anti-replay protection is in use). In this case, under certain conditions, the
session cache can get into an incorrect state and it will fail to flush properly
as it fills. The session cache will continue to grow in an unbounded manner. A
malicious client could deliberately create the scenario for this failure to
force a Denial of Service. It may also happen by accident in normal operation.
This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS
clients.
The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL
1.0.2 is also not affected by this issue.
Severity
5.9 (Medium)
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2024-04-09 15:14 UTC
CWE
- CWE-1325 - Improperly Controlled Sequential Memory Allocation
Assigner
References
15 references
Impacted products
32 products
| Vendor | Product | Version | |
|---|---|---|---|
| OpenSSL | OpenSSL |
Affected:
3.2.0 , < 3.2.2
(semver)
Affected: 3.1.0 , < 3.1.6 (semver) Affected: 3.0.0 , < 3.0.14 (semver) Affected: 1.1.1 , < 1.1.1y (custom) |
|
| Siemens | RUGGEDCOM RM1224 LTE(4G) EU |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | RUGGEDCOM RM1224 LTE(4G) NAM |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | RUGGEDCOM RST2428P |
Affected:
0 , < V3.1
(custom)
|
|
| Siemens | SCALANCE M804PB |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M812-1 ADSL-Router |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M816-1 ADSL-Router |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M826-2 SHDSL-Router |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M874-2 |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M874-3 |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M874-3 3G-Router (CN) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M876-3 |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M876-3 (ROK) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M876-4 |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M876-4 (EU) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE M876-4 (NAM) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE MUM853-1 (A1) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE MUM853-1 (B1) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE MUM853-1 (EU) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE MUM856-1 (A1) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE MUM856-1 (B1) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE MUM856-1 (CN) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE MUM856-1 (EU) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE MUM856-1 (RoW) |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE S615 EEC LAN-Router |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE S615 LAN-Router |
Affected:
0 , < V8.2
(custom)
|
|
| Siemens | SCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 family |
Unaffected:
0 , < *
(custom)
|
|
| Siemens | SCALANCE XCM-/XRM-/XCH-/XRH-300 family |
Affected:
0 , < V3.1
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518-4 PN/DP MFP |
Affected:
V3.1.0 , < V3.1.5
(custom)
|
|
| Siemens | SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP |
Affected:
V3.1.0 , < V3.1.5
(custom)
|
|
| Siemens | SIMATIC S7-1500 TM MFP - GNU/Linux subsystem |
Affected:
0 , < V1.1.1
(custom)
|
|
| Siemens | SIPLUS S7-1500 CPU 1518-4 PN/DP MFP |
Affected:
V3.1.0 , < V3.1.5
(custom)
|
Date Public
2024-04-08 00:00
{
"containers": {
"adp": [
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 5.9,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2024-2511",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-04-09T15:14:41.481807Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2025-03-28T19:21:08.630Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
},
{
"providerMetadata": {
"dateUpdated": "2025-11-03T21:54:02.419Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"name": "OpenSSL Advisory",
"tags": [
"vendor-advisory",
"x_transferred"
],
"url": "https://www.openssl.org/news/secadv/20240408.txt"
},
{
"name": "3.2.2 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/e9d7083e241670332e0443da0f0d4ffb52829f08"
},
{
"name": "3.1.6 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/7e4d731b1c07201ad9374c1cd9ac5263bdf35bce"
},
{
"name": "3.0.14 git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.com/openssl/openssl/commit/b52867a9f618bb955bed2a3ce3db4d4f97ed8e5d"
},
{
"name": "1.1.1y git commit",
"tags": [
"patch",
"x_transferred"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/5f8d25770ae6437db119dfc951e207271a326640"
},
{
"tags": [
"x_transferred"
],
"url": "http://www.openwall.com/lists/oss-security/2024/04/08/5"
},
{
"tags": [
"x_transferred"
],
"url": "https://security.netapp.com/advisory/ntap-20240503-0013/"
},
{
"url": "https://lists.debian.org/debian-lts-announce/2024/11/msg00000.html"
},
{
"url": "https://lists.debian.org/debian-lts-announce/2024/10/msg00033.html"
}
],
"title": "CVE Program Container"
},
{
"affected": [
{
"defaultStatus": "unknown",
"product": "RUGGEDCOM RM1224 LTE(4G) EU",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "RUGGEDCOM RM1224 LTE(4G) NAM",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "RUGGEDCOM RST2428P",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M804PB",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M812-1 ADSL-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M812-1 ADSL-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M816-1 ADSL-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M816-1 ADSL-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M826-2 SHDSL-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M874-2",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M874-3",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M874-3 3G-Router (CN)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M876-3",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M876-3 (ROK)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M876-4",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M876-4 (EU)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE M876-4 (NAM)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM853-1 (A1)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM853-1 (B1)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM853-1 (EU)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM856-1 (A1)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM856-1 (B1)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM856-1 (CN)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM856-1 (EU)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE MUM856-1 (RoW)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE S615 EEC LAN-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE S615 LAN-Router",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V8.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 family",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE XCM-/XRM-/XCH-/XRH-300 family",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V1.1.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1.5",
"status": "affected",
"version": "V3.1.0",
"versionType": "custom"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-15T00:25:23.074Z",
"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"shortName": "siemens-SADP"
},
"references": [
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-398330.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-265688.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-354112.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-915275.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-769027.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-613116.html"
}
],
"x_adpType": "supplier"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "OpenSSL",
"vendor": "OpenSSL",
"versions": [
{
"lessThan": "3.2.2",
"status": "affected",
"version": "3.2.0",
"versionType": "semver"
},
{
"lessThan": "3.1.6",
"status": "affected",
"version": "3.1.0",
"versionType": "semver"
},
{
"lessThan": "3.0.14",
"status": "affected",
"version": "3.0.0",
"versionType": "semver"
},
{
"lessThan": "1.1.1y",
"status": "affected",
"version": "1.1.1",
"versionType": "custom"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"user": "00000000-0000-4000-9000-000000000000",
"value": "Manish Patidar (Hewlett Packard Enterprise)"
},
{
"lang": "en",
"type": "remediation developer",
"user": "00000000-0000-4000-9000-000000000000",
"value": "Matt Caswell"
}
],
"datePublic": "2024-04-08T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "Issue summary: Some non-default TLS server configurations can cause unbounded\u003cbr\u003ememory growth when processing TLSv1.3 sessions\u003cbr\u003e\u003cbr\u003eImpact summary: An attacker may exploit certain server configurations to trigger\u003cbr\u003eunbounded memory growth that would lead to a Denial of Service\u003cbr\u003e\u003cbr\u003eThis problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is\u003cbr\u003ebeing used (but not if early_data support is also configured and the default\u003cbr\u003eanti-replay protection is in use). In this case, under certain conditions, the\u003cbr\u003esession cache can get into an incorrect state and it will fail to flush properly\u003cbr\u003eas it fills. The session cache will continue to grow in an unbounded manner. A\u003cbr\u003emalicious client could deliberately create the scenario for this failure to\u003cbr\u003eforce a Denial of Service. It may also happen by accident in normal operation.\u003cbr\u003e\u003cbr\u003eThis issue only affects TLS servers supporting TLSv1.3. It does not affect TLS\u003cbr\u003eclients.\u003cbr\u003e\u003cbr\u003eThe FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL\u003cbr\u003e1.0.2 is also not affected by this issue."
}
],
"value": "Issue summary: Some non-default TLS server configurations can cause unbounded\nmemory growth when processing TLSv1.3 sessions\n\nImpact summary: An attacker may exploit certain server configurations to trigger\nunbounded memory growth that would lead to a Denial of Service\n\nThis problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is\nbeing used (but not if early_data support is also configured and the default\nanti-replay protection is in use). In this case, under certain conditions, the\nsession cache can get into an incorrect state and it will fail to flush properly\nas it fills. The session cache will continue to grow in an unbounded manner. A\nmalicious client could deliberately create the scenario for this failure to\nforce a Denial of Service. It may also happen by accident in normal operation.\n\nThis issue only affects TLS servers supporting TLSv1.3. It does not affect TLS\nclients.\n\nThe FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL\n1.0.2 is also not affected by this issue."
}
],
"metrics": [
{
"format": "other",
"other": {
"content": {
"text": "Low"
},
"type": "https://www.openssl.org/policies/secpolicy.html"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-1325",
"description": "CWE-1325 Improperly Controlled Sequential Memory Allocation",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2024-10-14T14:56:00.208Z",
"orgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
"shortName": "openssl"
},
"references": [
{
"name": "OpenSSL Advisory",
"tags": [
"vendor-advisory"
],
"url": "https://www.openssl.org/news/secadv/20240408.txt"
},
{
"name": "3.2.2 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/e9d7083e241670332e0443da0f0d4ffb52829f08"
},
{
"name": "3.1.6 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/7e4d731b1c07201ad9374c1cd9ac5263bdf35bce"
},
{
"name": "3.0.14 git commit",
"tags": [
"patch"
],
"url": "https://github.com/openssl/openssl/commit/b52867a9f618bb955bed2a3ce3db4d4f97ed8e5d"
},
{
"name": "1.1.1y git commit",
"tags": [
"patch"
],
"url": "https://github.openssl.org/openssl/extended-releases/commit/5f8d25770ae6437db119dfc951e207271a326640"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Unbounded memory growth with session handling in TLSv1.3",
"x_generator": {
"engine": "Vulnogram 0.1.0-dev"
}
}
},
"cveMetadata": {
"assignerOrgId": "3a12439a-ef3a-4c79-92e6-6081a721f1e5",
"assignerShortName": "openssl",
"cveId": "CVE-2024-2511",
"datePublished": "2024-04-08T13:51:12.349Z",
"dateReserved": "2024-03-15T15:33:52.037Z",
"dateUpdated": "2026-10-15T00:25:23.074Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}