OPENSUSE-SU-2026:22203-1

Vulnerability from csaf_opensuse - Published: 2026-10-29 19:17 - Updated: 2026-11-10 16:05
Summary
Security update for tailscale
Severity
Important
Notes
Title of the patch: Security update for tailscale
Description of the patch: This update for tailscale fixes the following issues: Changes in tailscale: Update to version 1.104.1: + Go is updated to version 1.27 + WireGuard packet buffering uses less memory while waiting for peer handshakes + WireGuard packet queue depth scales with CPU core count, reducing peak memory usage under heavy traffic + Client-side netmap caching improves start up speed and connectivity when the Tailscale control plane is unreachable + WireGuard allocates a single packet buffer for batched I/O, improving throughput and reducing memory usage + An issue that could prevent traffic over IPv6 link-local addresses from flowing through direct and Tailscale Peer Relay connections is resolved + An issue preventing Linux desktop detection from working on Wayland environments is resolved Update 1.102.5: - The container no longer stops tailscaled when it falls behind on status updates and the connection is closed, which was common on large tailnets. It reconnects instead, and exits only if it cannot reconnect within one minute. Update 1.102.4: - All Platforms - Resolved an issue that could cause a loss in connectivity when a netmap update occurs near the time of reauthentication. Update 1.102.3: - All Platforms - Changed: Go is updated to version 1.26.6. - Fixed: Tailscale refuses host-scoped IPv4 destinations at every point that acts on an unmapped 4via6 address. This fix addresses a security vulnerability described in TS-2026-011. - Fixed: When MagicDNS is disabled, unqualified hostnames are correctly forwarded to the configured nameservers. - Fixed: Resolved an issue where nodes with Tailnet Lock enabled on large tailnets would experience startup failures. Update 1.102.2: - Fixed: A regression causing incoming Tailscale Funnel connections to fail is resolved. Update 1.102.1: - All Platforms - tailscaled_serve_outbound_bytes_total and tailscaled_serve_inbound_bytes_total client metrics report bytes sent to and received from peers on Tailscale Serve connections for Tailscale Services. - The tailscale get CLI command returns the current node's preferences. - The tailscale whoami CLI command displays information about the current user and device. - The tailscale service list CLI command displays Tailscale Services visible to the current node. - Node additions and removals are processed in constant time, significantly reducing CPU usage on large tailnets. - Tailscale Funnel domains use TLS-ALPN-01 for faster HTTPS certificate renewals. - Deprecated formats for 4via6 MagicDNS names are no longer available to use. - TLS certificates on idle servers proactively auto-renew in the absence of traffic. Warnings are issued when there is no valid cached certificate. - Dials to dual-stack DNS names through an IPv4-only exit node connect to the correct address when using tailscaled in userspace mode. - Certificate issuance for multiple domains runs in parallel. Provisioning multiple domains does not stall each certificate behind the previous one. - Resolved an issue causing connectivity issues from the operating system waking from sleep in wireguard-go. - A node's home DERP region is reported to the coordination server after a profile switch or login, allowing for peers to immediately connect to the node. - A memory leak that occurred after a failed WireGuard handshake has been resolved. - tailscale status --peers=false command shows the current device name in the output. - Resolved an issue that prevented connectivity via Tailscale Peer Relays after a client restart. - Linux - Assembly crypto routines for 32-bit ARM are available, improving performance on these platforms. - Userspace TUN optimizations improve throughput and performance. - Resolved an issue impacting performance of UDP GSO on Linux v7.0.x through v7.1.4. Update to version 1.98.10: (boo#1272825) - Tailscale SSH Unix socket forwarding respects symlink permissions. This fix addresses a security vulnerability described in TS-2026-004. - Tailscale SSH preforms additional checks to disallow UIDs and numeric-only usernames. This fix covers additional scenarios described in TS-2026-006. Update to version 1.98.9: (boo#1272825) - Tailscale SSH Unix socket forwarding respects symlink permissions. This fix addresses a security vulnerability described in TS-2026-004. - Tailscale Serve Unix socket proxy targets are restricted to the root user. This fix addresses a security vulnerability described in TS-2026-005. - Tailscale SSH does not allow the use of UIDs or numeric-only usernames. This fix addresses a security vulnerability described in TS-2026-006. - Nodes advertising Tailscale Services filter and reject packets from service IPs on ports they do not advertise. This fix addresses a security vulnerability described in TS-2026-007. - Tailscale Serve and Tailscale Funnel terminate path walks for non-absolute paths, preventing CPU core pinning. This fix addresses a security vulnerability described in TS-2026-008. - Tailscale SSH does not allow the use of usernames with leading dashes. This fix addresses a security vulnerability described in TS-2026-009. - An issue where a user could be logged out of Tailscale when changing the tag on a device via CLI has been resolved. - An issue that could cause a crash on 32-bit ARM platforms is resolved. Update to version 1.98.8: - An issue causing connectivity disruptions when the operating system wakes from sleep in wireguard-go is resolved. - An issue causing excessive handshake initiation retries in wireguard-go is resolved. - An issue causing connection leaks in Tailscale SSH Session Recording is resolved. Update to version 1.98.6: + ssh/tailssh: reject dangerous LD_/DYLD_ env vars in acceptEnv filtering + go.mod,wgengine/magicsock: pull wireguard-go fix for roaming endpoints + wgengine/magicsock: suppress TSMP disco advert when bestAddr is peer + control/controlknobs,wgengine/magicsock: disable TSMP disco advert if netmap caching is disabled Update to version 1.98.4: + An issue causing a deadlock when processing peer changes and disconnecting from the Tailscale control server is resolved Update to version 1.98.3: + An issue where netfilter rules could be applied inconsistently after a netfilter mode change failed has been resolved Update to version 1.98.2: + Ensure MagicDNS resolves tailnet hostnames after a network change Update to version 1.98.1: + Expired preferred peer addresses are cleared, reducing the time to elect an alternative + IP forwarding for subnet routers and exit nodes is reported as a health check + src_valid_mark sysctl is set in addition to connmark firewall rules to improve reverse path filtering and prevent dropped packets Update to verison 1.96.4: * An issue on forks of Linux caused by fallback-on-ENOSYS logic is resolved * An issue that could cause a segmentation violation during startup on MIPS devices is resolved Update to version 1.96.3: * DNS resolution issue caused by NRPT rule formatting is resolved Update to version 1.96.2: * tailscale dns query|status command supports --json flag to return JSON output * tailscale wait [flags] command waits for Tailscale resources to become available for binding * tailscale ip command supports --assert=<specific-ip-address> flag to assert that one or more of the node's IP addresses matches the specified IP address * Tailscale Peer Relays advertise addresses discovered via Amazon EC2 Instance Metadata Service * tailscaled_peer_relay_endpoints gauge user metrics are available for Tailscale Peer Relays * The AuthKey system policy applies only when a user is not in a logged in state * UPnP routes as expected during long lived port mapping sessions scenarios, including hard NAT * Launch the systray application on startup using autostart file with the tailscale configure systray --enable-startup=freedesktop command * Scaling of Tailscale Peer Relays UDP sockets is gated by container-aware GOMAXPROCS defaults * Firewall rules created on Linux platforms correctly mark their traffic, avoiding reverse path filtering dropping connections and producing health warnings and risk prompts Update to version 1.94.2: * Memory leak caused by high network map response rates is resolved Update to version 1.94.1.
Patchnames: openSUSE-Leap-16.0-packagehub-711
Terms of use: CSAF 2.0 data is provided by SUSE under the Creative Commons License 4.0 with Attribution (CC-BY-4.0).
Affected products
Product Identifier Version Remediation
Unresolved product id: openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.aarch64 —
Vendor Fix
Unresolved product id: openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.ppc64le —
Vendor Fix
Unresolved product id: openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.s390x —
Vendor Fix
Unresolved product id: openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.x86_64 —
Vendor Fix
Unresolved product id: openSUSE Leap 16.0:tailscale-bash-completion-0:1.104.1-bp160.1.1.noarch —
Vendor Fix
Unresolved product id: openSUSE Leap 16.0:tailscale-fish-completion-0:1.104.1-bp160.1.1.noarch —
Vendor Fix
Unresolved product id: openSUSE Leap 16.0:tailscale-zsh-completion-0:1.104.1-bp160.1.1.noarch —
Vendor Fix
Threats
Impact important

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://www.suse.com/support/security/rating/",
      "text": "important"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright 2024 SUSE LLC. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Security update for tailscale",
        "title": "Title of the patch"
      },
      {
        "category": "description",
        "text": "This update for tailscale fixes the following issues:\n\nChanges in tailscale:\n\nUpdate to version 1.104.1:\n\n  + Go is updated to version 1.27\n  + WireGuard packet buffering uses less memory while waiting for peer\n    handshakes\n  + WireGuard packet queue depth scales with CPU core count, reducing peak\n    memory usage under heavy traffic\n  + Client-side netmap caching improves start up speed and connectivity when\n    the Tailscale control plane is unreachable\n  + WireGuard allocates a single packet buffer for batched I/O, improving\n    throughput and reducing memory usage\n  + An issue that could prevent traffic over IPv6 link-local addresses from\n    flowing through direct and Tailscale Peer Relay connections is resolved\n  + An issue preventing Linux desktop detection from working on Wayland\n    environments is resolved\n\nUpdate 1.102.5:\n\n  - The container no longer stops tailscaled when it falls behind\n    on status updates and the connection is closed, which was\n    common on large tailnets. It reconnects instead, and exits only\n    if it cannot reconnect within one minute.\n\nUpdate 1.102.4:\n\n  - All Platforms\n    - Resolved an issue that could cause a loss in connectivity\n      when a netmap update occurs near the time of\n      reauthentication.\n\nUpdate 1.102.3:\n\n  - All Platforms\n  \n    - Changed: Go is updated to version 1.26.6.\n    - Fixed: Tailscale refuses host-scoped IPv4 destinations at\n      every point that acts on an unmapped 4via6 address. This fix\n      addresses a security vulnerability described in TS-2026-011.\n    - Fixed: When MagicDNS is disabled, unqualified hostnames are\n      correctly forwarded to the configured nameservers.\n    - Fixed: Resolved an issue where nodes with Tailnet Lock\n      enabled on large tailnets would experience startup failures.\n\nUpdate 1.102.2:\n\n  - Fixed: A regression causing incoming Tailscale Funnel\n    connections to fail is resolved.\n\nUpdate 1.102.1:\n\n  - All Platforms\n  \n    - tailscaled_serve_outbound_bytes_total and\n      tailscaled_serve_inbound_bytes_total client metrics report\n      bytes sent to and received from peers on Tailscale Serve\n      connections for Tailscale Services.\n    - The tailscale get CLI command returns the current node\u0027s\n      preferences.\n    - The tailscale whoami CLI command displays information about\n      the current user and device.\n    - The tailscale service list CLI command displays Tailscale\n      Services visible to the current node.\n    - Node additions and removals are processed in constant time,\n      significantly reducing CPU usage on large tailnets.\n    - Tailscale Funnel domains use TLS-ALPN-01 for faster HTTPS\n      certificate renewals.\n    - Deprecated formats for 4via6 MagicDNS names are no longer\n      available to use.\n    - TLS certificates on idle servers proactively auto-renew in\n      the absence of traffic. Warnings are issued when there is no\n      valid cached certificate.\n    - Dials to dual-stack DNS names through an IPv4-only exit node\n      connect to the correct address when using tailscaled in\n      userspace mode.\n    - Certificate issuance for multiple domains runs in parallel.\n      Provisioning multiple domains does not stall each certificate\n      behind the previous one.\n    - Resolved an issue causing connectivity issues from the\n      operating system waking from sleep in wireguard-go.\n    - A node\u0027s home DERP region is reported to the coordination\n      server after a profile switch or login, allowing for peers to\n      immediately connect to the node.\n    - A memory leak that occurred after a failed WireGuard\n      handshake has been resolved.\n    - tailscale status --peers=false command shows the current\n      device name in the output.\n    - Resolved an issue that prevented connectivity via Tailscale\n      Peer Relays after a client restart.\n      \n  - Linux\n  \n    - Assembly crypto routines for 32-bit ARM are available,\n      improving performance on these platforms.\n    - Userspace TUN optimizations improve throughput and\n      performance.\n    - Resolved an issue impacting performance of UDP GSO on Linux\n      v7.0.x through v7.1.4.\n\nUpdate to version 1.98.10: (boo#1272825)\n\n  - Tailscale SSH Unix socket forwarding respects symlink\n    permissions. This fix addresses a security vulnerability\n    described in TS-2026-004.\n  - Tailscale SSH preforms additional checks to disallow UIDs and\n    numeric-only usernames. This fix covers additional scenarios\n    described in TS-2026-006.\n\nUpdate to version 1.98.9: (boo#1272825)\n\n  - Tailscale SSH Unix socket forwarding respects symlink\n    permissions. This fix addresses a security vulnerability\n    described in TS-2026-004.\n  - Tailscale Serve Unix socket proxy targets are restricted to the\n    root user. This fix addresses a security vulnerability\n    described in TS-2026-005.\n  - Tailscale SSH does not allow the use of UIDs or numeric-only\n    usernames. This fix addresses a security vulnerability\n    described in TS-2026-006.\n  - Nodes advertising Tailscale Services filter and reject packets\n    from service IPs on ports they do not advertise. This fix\n    addresses a security vulnerability described in TS-2026-007.\n  - Tailscale Serve and Tailscale Funnel terminate path walks for\n    non-absolute paths, preventing CPU core pinning. This fix\n    addresses a security vulnerability described in TS-2026-008.\n  - Tailscale SSH does not allow the use of usernames with leading\n    dashes. This fix addresses a security vulnerability described\n    in TS-2026-009.\n  - An issue where a user could be logged out of Tailscale when\n    changing the tag on a device via CLI has been resolved.\n  - An issue that could cause a crash on 32-bit ARM platforms is\n    resolved.\n    \nUpdate to version 1.98.8:\n\n  - An issue causing connectivity disruptions when the operating\n    system wakes from sleep in wireguard-go is resolved.\n  - An issue causing excessive handshake initiation retries in\n    wireguard-go is resolved.\n  - An issue causing connection leaks in Tailscale SSH Session\n    Recording is resolved.\n\nUpdate to version 1.98.6:\n\n  + ssh/tailssh: reject dangerous LD_/DYLD_ env vars in acceptEnv filtering\n  + go.mod,wgengine/magicsock: pull wireguard-go fix for roaming endpoints\n  + wgengine/magicsock: suppress TSMP disco advert when bestAddr is peer\n  + control/controlknobs,wgengine/magicsock: disable TSMP disco advert if\n    netmap caching is disabled\n\nUpdate to version 1.98.4:\n\n  + An issue causing a deadlock when processing peer changes and disconnecting\n    from the Tailscale control server is resolved\n\nUpdate to version 1.98.3:\n\n  + An issue where netfilter rules could be applied inconsistently after a\n    netfilter mode change failed has been resolved\n\nUpdate to version 1.98.2:\n\n  + Ensure MagicDNS resolves tailnet hostnames after a network change\n\nUpdate to version 1.98.1:\n  \n  + Expired preferred peer addresses are cleared, reducing the time to elect an\n    alternative\n  + IP forwarding for subnet routers and exit nodes is reported as a health check\n  + src_valid_mark sysctl is set in addition to connmark firewall rules to\n    improve reverse path filtering and prevent dropped packets\n\nUpdate to verison 1.96.4:\n\n  * An issue on forks of Linux caused by fallback-on-ENOSYS logic is resolved\n  * An issue that could cause a segmentation violation during startup on MIPS\n    devices is resolved\n\nUpdate to version 1.96.3:\n\n  * DNS resolution issue caused by NRPT rule formatting is resolved\n\nUpdate to version 1.96.2:\n\n  * tailscale dns query|status command supports --json flag to return JSON\n    output\n  * tailscale wait [flags] command waits for Tailscale resources to become\n    available for binding\n  * tailscale ip command supports --assert=\u003cspecific-ip-address\u003e flag to assert\n    that one or more of the node\u0027s IP addresses matches the specified IP\n    address\n  * Tailscale Peer Relays advertise addresses discovered via Amazon EC2\n    Instance Metadata Service\n  * tailscaled_peer_relay_endpoints gauge user metrics are available for\n    Tailscale Peer Relays\n  * The AuthKey system policy applies only when a user is not in a logged in\n    state\n  * UPnP routes as expected during long lived port mapping sessions scenarios,\n    including hard NAT\n  * Launch the systray application on startup using autostart file with the\n    tailscale configure systray --enable-startup=freedesktop command\n  * Scaling of Tailscale Peer Relays UDP sockets is gated by container-aware\n    GOMAXPROCS defaults\n  * Firewall rules created on Linux platforms correctly mark their traffic,\n    avoiding reverse path filtering dropping connections and producing health\n    warnings and risk prompts\n\nUpdate to version 1.94.2:\n\n  * Memory leak caused by high network map response rates is resolved\n\nUpdate to version 1.94.1.\n",
        "title": "Description of the patch"
      },
      {
        "category": "details",
        "text": "openSUSE-Leap-16.0-packagehub-711",
        "title": "Patchnames"
      },
      {
        "category": "legal_disclaimer",
        "text": "CSAF 2.0 data is provided by SUSE under the Creative Commons License 4.0 with Attribution (CC-BY-4.0).",
        "title": "Terms of use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://www.suse.com/support/security/contact/",
      "name": "SUSE Product Security Team",
      "namespace": "https://www.suse.com/"
    },
    "references": [
      {
        "category": "external",
        "summary": "SUSE ratings",
        "url": "https://www.suse.com/support/security/rating/"
      },
      {
        "category": "self",
        "summary": "URL of this CSAF notice",
        "url": "https://ftp.suse.com/pub/projects/security/csaf/2026/opensuse-su-2026_22203-1.json"
      },
      {
        "category": "self",
        "summary": "SUSE Bug 1260968",
        "url": "https://bugzilla.suse.com/1260968"
      },
      {
        "category": "self",
        "summary": "SUSE Bug 1272825",
        "url": "https://bugzilla.suse.com/1272825"
      },
      {
        "category": "self",
        "summary": "SUSE CVE CVE-2026-33747 page",
        "url": "https://www.suse.com/security/cve/CVE-2026-33747/"
      }
    ],
    "title": "Security update for tailscale",
    "tracking": {
      "current_release_date": "2026-11-10T16:05:18Z",
      "generator": {
        "date": "2026-10-29T19:17:37Z",
        "engine": {
          "name": "cve-database.git:bin/generate-csaf.pl",
          "version": "1"
        }
      },
      "id": "openSUSE-SU-2026:22203-1",
      "initial_release_date": "2026-10-29T19:17:37Z",
      "revision_history": [
        {
          "date": "2026-10-29T19:17:37Z",
          "number": "1",
          "summary": "Current version"
        },
        {
          "date": "2026-10-31T17:20:00Z",
          "number": "2",
          "summary": "unknown changes"
        },
        {
          "date": "2026-11-10T16:05:18Z",
          "number": "3",
          "summary": "unknown changes"
        }
      ],
      "status": "final",
      "version": "3"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version",
                "name": "tailscale-0:1.104.1-bp160.1.1.aarch64",
                "product": {
                  "name": "tailscale-0:1.104.1-bp160.1.1.aarch64",
                  "product_id": "tailscale-0:1.104.1-bp160.1.1.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/suse/tailscale@1.104.1-bp160.1.1?arch=aarch64"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "tailscale-bash-completion-0:1.104.1-bp160.1.1.noarch",
                "product": {
                  "name": "tailscale-bash-completion-0:1.104.1-bp160.1.1.noarch",
                  "product_id": "tailscale-bash-completion-0:1.104.1-bp160.1.1.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/suse/tailscale-bash-completion@1.104.1-bp160.1.1?arch=noarch"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "tailscale-fish-completion-0:1.104.1-bp160.1.1.noarch",
                "product": {
                  "name": "tailscale-fish-completion-0:1.104.1-bp160.1.1.noarch",
                  "product_id": "tailscale-fish-completion-0:1.104.1-bp160.1.1.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/suse/tailscale-fish-completion@1.104.1-bp160.1.1?arch=noarch"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "tailscale-zsh-completion-0:1.104.1-bp160.1.1.noarch",
                "product": {
                  "name": "tailscale-zsh-completion-0:1.104.1-bp160.1.1.noarch",
                  "product_id": "tailscale-zsh-completion-0:1.104.1-bp160.1.1.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/suse/tailscale-zsh-completion@1.104.1-bp160.1.1?arch=noarch"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "noarch"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "tailscale-0:1.104.1-bp160.1.1.ppc64le",
                "product": {
                  "name": "tailscale-0:1.104.1-bp160.1.1.ppc64le",
                  "product_id": "tailscale-0:1.104.1-bp160.1.1.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/suse/tailscale@1.104.1-bp160.1.1?arch=ppc64le"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "ppc64le"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "tailscale-0:1.104.1-bp160.1.1.s390x",
                "product": {
                  "name": "tailscale-0:1.104.1-bp160.1.1.s390x",
                  "product_id": "tailscale-0:1.104.1-bp160.1.1.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/suse/tailscale@1.104.1-bp160.1.1?arch=s390x"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "s390x"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "tailscale-0:1.104.1-bp160.1.1.x86_64",
                "product": {
                  "name": "tailscale-0:1.104.1-bp160.1.1.x86_64",
                  "product_id": "tailscale-0:1.104.1-bp160.1.1.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/suse/tailscale@1.104.1-bp160.1.1?arch=x86_64"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "x86_64"
          },
          {
            "branches": [
              {
                "category": "product_name",
                "name": "openSUSE Leap 16.0",
                "product": {
                  "name": "openSUSE Leap 16.0",
                  "product_id": "openSUSE Leap 16.0"
                }
              }
            ],
            "category": "product_family",
            "name": "SUSE Linux Enterprise"
          }
        ],
        "category": "vendor",
        "name": "SUSE"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "tailscale-0:1.104.1-bp160.1.1.aarch64 as component of openSUSE Leap 16.0",
          "product_id": "openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.aarch64"
        },
        "product_reference": "tailscale-0:1.104.1-bp160.1.1.aarch64",
        "relates_to_product_reference": "openSUSE Leap 16.0"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "tailscale-0:1.104.1-bp160.1.1.ppc64le as component of openSUSE Leap 16.0",
          "product_id": "openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.ppc64le"
        },
        "product_reference": "tailscale-0:1.104.1-bp160.1.1.ppc64le",
        "relates_to_product_reference": "openSUSE Leap 16.0"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "tailscale-0:1.104.1-bp160.1.1.s390x as component of openSUSE Leap 16.0",
          "product_id": "openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.s390x"
        },
        "product_reference": "tailscale-0:1.104.1-bp160.1.1.s390x",
        "relates_to_product_reference": "openSUSE Leap 16.0"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "tailscale-0:1.104.1-bp160.1.1.x86_64 as component of openSUSE Leap 16.0",
          "product_id": "openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.x86_64"
        },
        "product_reference": "tailscale-0:1.104.1-bp160.1.1.x86_64",
        "relates_to_product_reference": "openSUSE Leap 16.0"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "tailscale-bash-completion-0:1.104.1-bp160.1.1.noarch as component of openSUSE Leap 16.0",
          "product_id": "openSUSE Leap 16.0:tailscale-bash-completion-0:1.104.1-bp160.1.1.noarch"
        },
        "product_reference": "tailscale-bash-completion-0:1.104.1-bp160.1.1.noarch",
        "relates_to_product_reference": "openSUSE Leap 16.0"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "tailscale-fish-completion-0:1.104.1-bp160.1.1.noarch as component of openSUSE Leap 16.0",
          "product_id": "openSUSE Leap 16.0:tailscale-fish-completion-0:1.104.1-bp160.1.1.noarch"
        },
        "product_reference": "tailscale-fish-completion-0:1.104.1-bp160.1.1.noarch",
        "relates_to_product_reference": "openSUSE Leap 16.0"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "tailscale-zsh-completion-0:1.104.1-bp160.1.1.noarch as component of openSUSE Leap 16.0",
          "product_id": "openSUSE Leap 16.0:tailscale-zsh-completion-0:1.104.1-bp160.1.1.noarch"
        },
        "product_reference": "tailscale-zsh-completion-0:1.104.1-bp160.1.1.noarch",
        "relates_to_product_reference": "openSUSE Leap 16.0"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2026-33747",
      "ids": [
        {
          "system_name": "SUSE CVE Page",
          "text": "https://www.suse.com/security/cve/CVE-2026-33747"
        }
      ],
      "notes": [
        {
          "category": "general",
          "text": "BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. Prior to version 0.28.1, when using a custom BuildKit frontend, the frontend can craft an API message that causes files to be written outside of the BuildKit state directory for the execution context. The issue has been fixed in v0.28.1. The vulnerability requires using an untrusted BuildKit frontend set with `#syntax` or `--build-arg BUILDKIT_SYNTAX`. Using these options with a well-known frontend image like `docker/dockerfile` is not affected.",
          "title": "CVE description"
        }
      ],
      "product_status": {
        "recommended": [
          "openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.aarch64",
          "openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.ppc64le",
          "openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.s390x",
          "openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.x86_64",
          "openSUSE Leap 16.0:tailscale-bash-completion-0:1.104.1-bp160.1.1.noarch",
          "openSUSE Leap 16.0:tailscale-fish-completion-0:1.104.1-bp160.1.1.noarch",
          "openSUSE Leap 16.0:tailscale-zsh-completion-0:1.104.1-bp160.1.1.noarch"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "CVE-2026-33747",
          "url": "https://www.suse.com/security/cve/CVE-2026-33747"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1260954 for CVE-2026-33747",
          "url": "https://bugzilla.suse.com/1260954"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or \"zypper patch\".\n",
          "product_ids": [
            "openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.aarch64",
            "openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.ppc64le",
            "openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.s390x",
            "openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.x86_64",
            "openSUSE Leap 16.0:tailscale-bash-completion-0:1.104.1-bp160.1.1.noarch",
            "openSUSE Leap 16.0:tailscale-fish-completion-0:1.104.1-bp160.1.1.noarch",
            "openSUSE Leap 16.0:tailscale-zsh-completion-0:1.104.1-bp160.1.1.noarch"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.aarch64",
            "openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.ppc64le",
            "openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.s390x",
            "openSUSE Leap 16.0:tailscale-0:1.104.1-bp160.1.1.x86_64",
            "openSUSE Leap 16.0:tailscale-bash-completion-0:1.104.1-bp160.1.1.noarch",
            "openSUSE Leap 16.0:tailscale-fish-completion-0:1.104.1-bp160.1.1.noarch",
            "openSUSE Leap 16.0:tailscale-zsh-completion-0:1.104.1-bp160.1.1.noarch"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "date": "2026-10-29T19:17:37Z",
          "details": "important"
        }
      ],
      "title": "CVE-2026-33747"
    }
  ]
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.