FKIE_CVE-2026-84782
Vulnerability from fkie_nvd - Published: 2026-09-29 16:17 - Updated: 2026-09-29 21:27
Severity
Summary
Issue summary: The DTLS retransmission logic does not correctly handle
a handshake message write that is suspended part-way through.
The retransmitted message can be read past the message buffer and
the retransmission overwrites the internal state the suspended write
needs to resume correctly.
Impact summary: The retransmitted message can disclose a heap memory
to the peer as plaintext handshake data or cause a crash and a Denial
of Service when the read reaches an unmapped memory region.
CWE: CWE-125: Out-of-bounds Read
Description: DTLS handshake messages can be written out in multiple
fragments, and a write can suspend mid-message (returning WANT_WRITE)
if the underlying transport temporarily cannot accept more data. While
such a write is suspended, the DTLS retransmission timer may
independently fire and ask the retransmission logic to resend an
earlier, already-acknowledged-as-sent message from its retransmit
queue.
The retransmission logic reused the same internal buffer and position
tracking as the message that was still being written, without
resetting the position back to the start of the message being
retransmitted. As a result the retransmission was read starting from
wherever the suspended write had left off, producing a mislabelled
message whose body was leftover bytes from the other, larger message
still in flight - content that was never meant to be sent at that
point, and which could run past the end of the allocated buffer.
Separately, even when the retransmission is positioned correctly,
allowing it to run to completion while another write is suspended
overwrites the same shared bookkeeping that the suspended write
depends on to resume. When the application later resumes the
suspended write (via a subsequent SSL_read(), SSL_write(),
SSL_accept(), or SSL_connect() call), it finds that bookkeeping in a
state inconsistent with the message and aborts the process in
a debugging build.
The fix resets the retransmission's read position to the start of the
message before resending, and skips retransmission entirely whenever a
handshake write is still suspended, deferring to the next call that
resumes it instead.
FIPS impact: no
The affected code is outside the FIPS module boundary.
References
Impacted products
| Vendor | Product | Version |
|---|
{
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "OpenSSL",
"vendor": "OpenSSL",
"versions": [
{
"lessThan": "4.0.3",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
},
{
"lessThan": "3.6.5",
"status": "affected",
"version": "3.6.0",
"versionType": "semver"
},
{
"lessThan": "3.5.9",
"status": "affected",
"version": "3.5.0",
"versionType": "semver"
},
{
"lessThan": "3.4.8",
"status": "affected",
"version": "3.4.0",
"versionType": "semver"
},
{
"lessThan": "3.0.23",
"status": "affected",
"version": "3.0.0",
"versionType": "semver"
},
{
"lessThan": "1.1.1zj",
"status": "affected",
"version": "1.1.1",
"versionType": "custom"
},
{
"lessThan": "1.0.2zs",
"status": "affected",
"version": "1.0.2",
"versionType": "custom"
}
]
}
],
"source": "openssl-security@openssl.org"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "Issue summary: The DTLS retransmission logic does not correctly handle\na handshake message write that is suspended part-way through.\nThe retransmitted message can be read past the message buffer and\nthe retransmission overwrites the internal state the suspended write\nneeds to resume correctly.\n\nImpact summary: The retransmitted message can disclose a heap memory\nto the peer as plaintext handshake data or cause a crash and a Denial\nof Service when the read reaches an unmapped memory region.\n\nCWE: CWE-125: Out-of-bounds Read\n\nDescription: DTLS handshake messages can be written out in multiple\nfragments, and a write can suspend mid-message (returning WANT_WRITE)\nif the underlying transport temporarily cannot accept more data. While\nsuch a write is suspended, the DTLS retransmission timer may\nindependently fire and ask the retransmission logic to resend an\nearlier, already-acknowledged-as-sent message from its retransmit\nqueue.\n\nThe retransmission logic reused the same internal buffer and position\ntracking as the message that was still being written, without\nresetting the position back to the start of the message being\nretransmitted. As a result the retransmission was read starting from\nwherever the suspended write had left off, producing a mislabelled\nmessage whose body was leftover bytes from the other, larger message\nstill in flight - content that was never meant to be sent at that\npoint, and which could run past the end of the allocated buffer.\n\nSeparately, even when the retransmission is positioned correctly,\nallowing it to run to completion while another write is suspended\noverwrites the same shared bookkeeping that the suspended write\ndepends on to resume. When the application later resumes the\nsuspended write (via a subsequent SSL_read(), SSL_write(),\nSSL_accept(), or SSL_connect() call), it finds that bookkeeping in a\nstate inconsistent with the message and aborts the process in\na debugging build.\n\nThe fix resets the retransmission\u0027s read position to the start of the\nmessage before resending, and skips retransmission entirely whenever a\nhandshake write is still suspended, deferring to the next call that\nresumes it instead.\n\nFIPS impact: no\nThe affected code is outside the FIPS module boundary."
}
],
"id": "CVE-2026-84782",
"lastModified": "2026-09-29T21:27:41.130",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 8.2,
"baseSeverity": "HIGH",
"confidentialityImpact": "LOW",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H",
"version": "3.1"
},
"exploitabilityScore": 3.9,
"impactScore": 4.2,
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"type": "Secondary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2026-84782",
"options": [
{
"exploitation": "none"
},
{
"automatable": "yes"
},
{
"technicalImpact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-09-29T16:45:35.833483Z",
"version": "2.0.3"
}
}
]
},
"published": "2026-09-29T16:17:12.500",
"references": [
{
"source": "openssl-security@openssl.org",
"url": "https://github.com/openssl/openssl/commit/906cf0ef1c85ca40ce69163e9086d6d3fe292943"
},
{
"source": "openssl-security@openssl.org",
"url": "https://github.com/openssl/openssl/commit/9f6b34422af7eb5dac61322e33dac1ae989fa628"
},
{
"source": "openssl-security@openssl.org",
"url": "https://github.com/openssl/openssl/commit/a383dafdd754eb5b22bf45e37e1bff9d07277a58"
},
{
"source": "openssl-security@openssl.org",
"url": "https://github.com/openssl/openssl/commit/d951e02ede8f6a6ff8150546db44b34f0518192c"
},
{
"source": "openssl-security@openssl.org",
"url": "https://openssl-library.org/news/secadv/20260929.txt"
}
],
"sourceIdentifier": "openssl-security@openssl.org",
"vulnStatus": "Awaiting Analysis",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-125"
}
],
"source": "openssl-security@openssl.org",
"type": "Secondary"
}
]
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…