FKIE_CVE-2026-64276

Vulnerability from fkie_nvd - Published: 2026-07-25 10:17 - Updated: 2026-08-17 05:17
Summary
In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count rmi_f30_map_gpios() allocates gpioled_key_map with min(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, but rmi_f30_attention() iterates the full f30->gpioled_count (device query register, range 0..31) and dereferences gpioled_key_map[i], and input->keycodemax is set to the full gpioled_count while input->keycode points at the 6-entry allocation. A device that reports gpioled_count > 6 with GPIO support enabled therefore causes an out-of-bounds read on the attention interrupt and out-of-bounds read/write through the EVIOCGKEYCODE/EVIOCSKEYCODE ioctls, which bound the index only against keycodemax. This is the same defect as the F3A handler, which was copied from F30. Size the keymap for the full gpioled_count; the mapping loop still assigns only the first min(gpioled_count, TRACKSTICK_RANGE_END) entries.

{
  "affected": [
    {
      "affectedData": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/input/rmi4/rmi_f30.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "8c6d18d61bb6fe0e6edf848413391c590552e8a9",
              "status": "affected",
              "version": "3e64fcbdbd10e46dede502d507dbcc104837cd59",
              "versionType": "git"
            },
            {
              "lessThan": "d162a1ead7de404d8b41a093c83ed0db6487cded",
              "status": "affected",
              "version": "3e64fcbdbd10e46dede502d507dbcc104837cd59",
              "versionType": "git"
            },
            {
              "lessThan": "f0be9eba946e9200b43265e0a748d38bd0a56954",
              "status": "affected",
              "version": "3e64fcbdbd10e46dede502d507dbcc104837cd59",
              "versionType": "git"
            },
            {
              "lessThan": "26c895928d7118436a24f564587cb4aefc40cdd8",
              "status": "affected",
              "version": "3e64fcbdbd10e46dede502d507dbcc104837cd59",
              "versionType": "git"
            },
            {
              "lessThan": "4e3689c26854356f41fbaa1eafa382e58ac79e00",
              "status": "affected",
              "version": "3e64fcbdbd10e46dede502d507dbcc104837cd59",
              "versionType": "git"
            },
            {
              "lessThan": "e849c6f51e6877104c765da084e001ec37c8e119",
              "status": "affected",
              "version": "3e64fcbdbd10e46dede502d507dbcc104837cd59",
              "versionType": "git"
            },
            {
              "lessThan": "bfe622efecd4ff0a792d0ecd1a8dce535a902f50",
              "status": "affected",
              "version": "3e64fcbdbd10e46dede502d507dbcc104837cd59",
              "versionType": "git"
            },
            {
              "lessThan": "d577e46785d45484b2ab7e7309c49b18764bf56c",
              "status": "affected",
              "version": "3e64fcbdbd10e46dede502d507dbcc104837cd59",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/input/rmi4/rmi_f30.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "4.14"
            },
            {
              "lessThan": "4.14",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.10.*",
              "status": "unaffected",
              "version": "5.10.261",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.15.*",
              "status": "unaffected",
              "version": "5.15.212",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.178",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.145",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.96",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.39",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.1.*",
              "status": "unaffected",
              "version": "7.1.4",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.2",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "configurations": [
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "8EFB0D87-39D4-43FF-BE77-BEE0C5BE4EEB",
              "versionEndExcluding": "5.10.261",
              "versionStartIncluding": "4.14.1",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "8E99FB01-CD93-41AF-A653-3F450652B9A6",
              "versionEndExcluding": "5.15.212",
              "versionStartIncluding": "5.11",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "092233C7-F4E0-40C8-BD4D-A28FE50DFE20",
              "versionEndExcluding": "6.1.178",
              "versionStartIncluding": "5.16",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "7046B092-F810-4440-ACE6-60218518EECE",
              "versionEndExcluding": "6.6.145",
              "versionStartIncluding": "6.2",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "38A8100E-2B1A-462F-AEE9-8901B870FEF2",
              "versionEndExcluding": "6.12.96",
              "versionStartIncluding": "6.7",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "914AE4BC-3D59-4C5A-9DB5-9CE327B429F7",
              "versionEndExcluding": "6.18.39",
              "versionStartIncluding": "6.13",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "6228DDD6-4557-4AA3-9F43-AB995D471E42",
              "versionEndExcluding": "7.1.4",
              "versionStartIncluding": "6.19",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:4.14:-:*:*:*:*:*:*",
              "matchCriteriaId": "7875AA30-1F6F-470C-A52D-ECBD6663CEC5",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:4.14:rc7:*:*:*:*:*:*",
              "matchCriteriaId": "C834B5F2-810F-4291-8E1F-1B32635E08F3",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:4.14:rc8:*:*:*:*:*:*",
              "matchCriteriaId": "BB4A96BC-72CC-4EF1-916C-9ED7177C196E",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nInput: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count\n\nrmi_f30_map_gpios() allocates gpioled_key_map with\nmin(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, but\nrmi_f30_attention() iterates the full f30-\u003egpioled_count (device query\nregister, range 0..31) and dereferences gpioled_key_map[i], and\ninput-\u003ekeycodemax is set to the full gpioled_count while input-\u003ekeycode\npoints at the 6-entry allocation.\n\nA device that reports gpioled_count \u003e 6 with GPIO support enabled\ntherefore causes an out-of-bounds read on the attention interrupt and\nout-of-bounds read/write through the EVIOCGKEYCODE/EVIOCSKEYCODE ioctls,\nwhich bound the index only against keycodemax. This is the same defect\nas the F3A handler, which was copied from F30.\n\nSize the keymap for the full gpioled_count; the mapping loop still\nassigns only the first min(gpioled_count, TRACKSTICK_RANGE_END) entries."
    }
  ],
  "id": "CVE-2026-64276",
  "lastModified": "2026-08-17T05:17:26.747",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "LOCAL",
          "availabilityImpact": "HIGH",
          "baseScore": 7.8,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "privilegesRequired": "LOW",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 1.8,
        "impactScore": 5.9,
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "type": "Secondary"
      }
    ]
  },
  "published": "2026-07-25T10:17:08.060",
  "references": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/26c895928d7118436a24f564587cb4aefc40cdd8"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/4e3689c26854356f41fbaa1eafa382e58ac79e00"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/8c6d18d61bb6fe0e6edf848413391c590552e8a9"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/bfe622efecd4ff0a792d0ecd1a8dce535a902f50"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/d162a1ead7de404d8b41a093c83ed0db6487cded"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/d577e46785d45484b2ab7e7309c49b18764bf56c"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/e849c6f51e6877104c765da084e001ec37c8e119"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/f0be9eba946e9200b43265e0a748d38bd0a56954"
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "vulnStatus": "Analyzed",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "CWE-787"
        }
      ],
      "source": "nvd@nist.gov",
      "type": "Primary"
    }
  ]
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.

Loading…

Loading…

Loading…

Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.


Loading…