FKIE_CVE-2026-46114
Vulnerability from fkie_nvd - Published: 2026-05-28 10:16 - Updated: 2026-06-24 17:00
Severity
Summary
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Reject non-8-byte ATOMIC_WRITE payloads
atomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c
unconditionally dereferences 8 bytes at payload_addr(pkt):
value = *(u64 *)payload_addr(pkt);
check_rkey() previously accepted an ATOMIC_WRITE request with pktlen ==
resid == 0 because the length validation only compared pktlen against
resid. A remote initiator that sets the RETH length to 0 therefore reaches
atomic_write_reply() with a zero-byte logical payload, and the responder
reads sizeof(u64) bytes from past the logical end of the packet into
skb->head tailroom, then writes those 8 bytes into the attacker's MR via
rxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel
tailroom per probe (the other 4 bytes are the packet's own trailing ICRC).
IBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is
protocol-invalid. Hoist a strict length check into check_rkey() so the
responder never reaches the unchecked dereference, and keep the existing
WRITE-family length logic for the normal RDMA WRITE path.
Reproduced on mainline with an unmodified rxe driver: a sustained
zero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer
bytes into the attacker's MR, including recognisable kernel strings and
partial kernel-direct-map pointer words. With this patch applied the
responder rejects the PDU and the MR stays all-zero.
References
Impacted products
| Vendor | Product | Version | |
|---|---|---|---|
| linux | linux_kernel | * | |
| linux | linux_kernel | * | |
| linux | linux_kernel | * | |
| linux | linux_kernel | * | |
| linux | linux_kernel | 7.1 | |
| linux | linux_kernel | 7.1 |
{
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/infiniband/sw/rxe/rxe_resp.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "539cabb7b2d8ba70f55bba91db55faef11c2a6d7",
"status": "affected",
"version": "034e285f8b99062a0cf29112e1232154a6a44aa5",
"versionType": "git"
},
{
"lessThan": "d415fce3fcde6d7aeea6c25362a395b905811452",
"status": "affected",
"version": "034e285f8b99062a0cf29112e1232154a6a44aa5",
"versionType": "git"
},
{
"lessThan": "105bf79a23b85cf3a761d18a4f3e10ce88526bc1",
"status": "affected",
"version": "034e285f8b99062a0cf29112e1232154a6a44aa5",
"versionType": "git"
},
{
"lessThan": "7ec1ed4747f5f99f8b797bb438c5efd36079fad5",
"status": "affected",
"version": "034e285f8b99062a0cf29112e1232154a6a44aa5",
"versionType": "git"
},
{
"lessThan": "1114c87aa6f195cf07da55a27b2122ae26557b26",
"status": "affected",
"version": "034e285f8b99062a0cf29112e1232154a6a44aa5",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/infiniband/sw/rxe/rxe_resp.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "6.2"
},
{
"lessThan": "6.2",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.140",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.88",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.30",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.7",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"configurations": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "A1A92866-F406-43B5-B2D1-CFC274753E9D",
"versionEndExcluding": "6.6.140",
"versionStartIncluding": "6.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "5AFBE0EC-CCDF-4207-AE92-ABF958125CA4",
"versionEndExcluding": "6.12.88",
"versionStartIncluding": "6.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "BF39AE08-AE6D-4410-8FBE-76F6BF5BF55B",
"versionEndExcluding": "6.18.30",
"versionStartIncluding": "6.13",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "D0893CA7-9AE6-4DFE-AC75-48967D73AD8E",
"versionEndExcluding": "7.0.7",
"versionStartIncluding": "6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc1:*:*:*:*:*:*",
"matchCriteriaId": "B1EF7059-E670-45F4-B422-54C40FA86390",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc2:*:*:*:*:*:*",
"matchCriteriaId": "0D38F0BF-A728-4133-A358-D44A2F7EE6D6",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nRDMA/rxe: Reject non-8-byte ATOMIC_WRITE payloads\n\natomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c\nunconditionally dereferences 8 bytes at payload_addr(pkt):\n\n value = *(u64 *)payload_addr(pkt);\n\ncheck_rkey() previously accepted an ATOMIC_WRITE request with pktlen ==\nresid == 0 because the length validation only compared pktlen against\nresid. A remote initiator that sets the RETH length to 0 therefore reaches\natomic_write_reply() with a zero-byte logical payload, and the responder\nreads sizeof(u64) bytes from past the logical end of the packet into\nskb-\u003ehead tailroom, then writes those 8 bytes into the attacker\u0027s MR via\nrxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel\ntailroom per probe (the other 4 bytes are the packet\u0027s own trailing ICRC).\n\nIBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is\nprotocol-invalid. Hoist a strict length check into check_rkey() so the\nresponder never reaches the unchecked dereference, and keep the existing\nWRITE-family length logic for the normal RDMA WRITE path.\n\nReproduced on mainline with an unmodified rxe driver: a sustained\nzero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer\nbytes into the attacker\u0027s MR, including recognisable kernel strings and\npartial kernel-direct-map pointer words. With this patch applied the\nresponder rejects the PDU and the MR stays all-zero."
}
],
"id": "CVE-2026-46114",
"lastModified": "2026-06-24T17:00:11.027",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 7.5,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N",
"version": "3.1"
},
"exploitabilityScore": 3.9,
"impactScore": 3.6,
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"type": "Secondary"
}
]
},
"published": "2026-05-28T10:16:26.870",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/105bf79a23b85cf3a761d18a4f3e10ce88526bc1"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/1114c87aa6f195cf07da55a27b2122ae26557b26"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/539cabb7b2d8ba70f55bba91db55faef11c2a6d7"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/7ec1ed4747f5f99f8b797bb438c5efd36079fad5"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/d415fce3fcde6d7aeea6c25362a395b905811452"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Undergoing Analysis",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-476"
}
],
"source": "nvd@nist.gov",
"type": "Primary"
}
]
}
Loading…
Loading…
Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline
Sightings and recorded dates, grouped by day · UTC
Loading timeline…
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.