FKIE_CVE-2025-1863

Vulnerability from fkie_nvd - Published: 2025-04-18 06:15 - Updated: 2026-06-17 08:39
Summary
Insecure default settings have been found in recorder products provided by Yokogawa Electric Corporation. The default setting of the authentication function is disabled on the affected products. Therefore, when connected to a network with default settings, anyone can access all functions related to settings and operations. As a result, an attacker can illegally manipulate and configure important data such as measured values and settings. This issue affects GX10 / GX20 / GP10 / GP20 Paperless Recorders: R5.04.01 or earlier; GM Data Acquisition System: R5.05.01 or earlier; DX1000 / DX2000 / DX1000N Paperless Recorders: R4.21 or earlier; FX1000 Paperless Recorders: R1.31 or earlier; μR10000 / μR20000 Chart Recorders: R1.51 or earlier; MW100 Data Acquisition Units: All versions; DX1000T / DX2000T Paperless Recorders: All versions; CX1000 / CX2000 Paperless Recorders: All versions.
Impacted products
Vendor Product Version

{
  "affected": [
    {
      "affectedData": [
        {
          "defaultStatus": "unknown",
          "product": "GX10 / GX20 / GP10 / GP20 Paperless Recorders",
          "vendor": "Yokogawa Electric Corporation",
          "versions": [
            {
              "status": "affected",
              "version": "R5.04.01 or earlier",
              "versionType": "custom"
            }
          ]
        },
        {
          "defaultStatus": "unknown",
          "product": "GM Data Acquisition System",
          "vendor": "Yokogawa Electric Corporation",
          "versions": [
            {
              "status": "affected",
              "version": "R5.05.01 or earlier",
              "versionType": "custom"
            }
          ]
        },
        {
          "defaultStatus": "unknown",
          "product": "DX1000 / DX2000 / DX1000N Paperless Recorders",
          "vendor": "Yokogawa Electric Corporation",
          "versions": [
            {
              "status": "affected",
              "version": "R4.21 or earlier",
              "versionType": "custom"
            }
          ]
        },
        {
          "defaultStatus": "unknown",
          "product": "FX1000 Paperless Recorders",
          "vendor": "Yokogawa Electric Corporation",
          "versions": [
            {
              "status": "affected",
              "version": "R1.31 or earlier",
              "versionType": "custom"
            }
          ]
        },
        {
          "defaultStatus": "unknown",
          "product": "\u03bcR10000 / \u03bcR20000 Chart Recorders",
          "vendor": "Yokogawa Electric Corporation",
          "versions": [
            {
              "status": "affected",
              "version": "R1.51 or earlier",
              "versionType": "custom"
            }
          ]
        },
        {
          "defaultStatus": "unknown",
          "product": "MW100 Data Acquisition Units",
          "vendor": "Yokogawa Electric Corporation",
          "versions": [
            {
              "status": "affected",
              "version": "All versions",
              "versionType": "custom"
            }
          ]
        },
        {
          "defaultStatus": "unknown",
          "product": "DX1000T / DX2000T Paperless Recorders",
          "vendor": "Yokogawa Electric Corporation",
          "versions": [
            {
              "status": "affected",
              "version": "All versions",
              "versionType": "custom"
            }
          ]
        },
        {
          "defaultStatus": "unknown",
          "product": "CX1000 / CX2000 Paperless Recorders",
          "vendor": "Yokogawa Electric Corporation",
          "versions": [
            {
              "status": "affected",
              "version": "All versions",
              "versionType": "custom"
            }
          ]
        }
      ],
      "source": "7168b535-132a-4efe-a076-338f829b2eb9"
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "Insecure default settings have been found in recorder products provided by Yokogawa Electric Corporation. The default setting of the authentication function is disabled on the affected products. Therefore, when connected to a network with default settings, anyone can access all functions related to settings and operations. As a result, an attacker can illegally manipulate and configure important data such as measured values and settings.\nThis issue affects GX10 / GX20 / GP10 / GP20 Paperless Recorders: R5.04.01 or earlier; GM Data Acquisition System: R5.05.01 or earlier; DX1000 / DX2000 / DX1000N Paperless Recorders: R4.21 or earlier; FX1000 Paperless Recorders: R1.31 or earlier; \u03bcR10000 / \u03bcR20000 Chart Recorders: R1.51 or earlier; MW100 Data Acquisition Units: All versions; DX1000T / DX2000T Paperless Recorders: All versions; CX1000 / CX2000 Paperless Recorders: All versions."
    },
    {
      "lang": "es",
      "value": "Se han detectado configuraciones predeterminadas inseguras en los registradores de Yokogawa Electric Corporation. La funci\u00f3n de autenticaci\u00f3n est\u00e1 deshabilitada por defecto en los productos afectados. Por lo tanto, al conectarse a una red con la configuraci\u00f3n predeterminada, cualquier persona puede acceder a todas las funciones relacionadas con la configuraci\u00f3n y las operaciones. Como resultado, un atacante puede manipular y configurar ilegalmente datos importantes, como valores medidos y configuraciones. Este problema afecta a los registradores sin papel GX10/GX20/GP10/GP20: R5.04.01 o anteriores; Sistema de adquisici\u00f3n de datos GM: R5.05.01 o anteriores; Registradores sin papel DX1000/DX2000/DX1000N: R4.21 o anteriores; Registradores sin papel FX1000: R1.31 o anteriores; Registradores de gr\u00e1ficos ?R10000/?R20000: R1.51 o anteriores; Unidades de adquisici\u00f3n de datos MW100: Todas las versiones. Registradores sin papel DX1000T / DX2000T: todas las versiones; Registradores sin papel CX1000 / CX2000: todas las versiones."
    }
  ],
  "id": "CVE-2025-1863",
  "lastModified": "2026-06-17T08:39:55.473",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "NETWORK",
          "availabilityImpact": "HIGH",
          "baseScore": 9.8,
          "baseSeverity": "CRITICAL",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 3.9,
        "impactScore": 5.9,
        "source": "7168b535-132a-4efe-a076-338f829b2eb9",
        "type": "Secondary"
      }
    ],
    "ssvcV203": [
      {
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "ssvcData": {
          "id": "CVE-2025-1863",
          "options": [
            {
              "exploitation": "none"
            },
            {
              "automatable": "yes"
            },
            {
              "technicalImpact": "total"
            }
          ],
          "role": "CISA Coordinator",
          "timestamp": "2025-04-18T11:39:17.017969Z",
          "version": "2.0.3"
        }
      }
    ]
  },
  "published": "2025-04-18T06:15:42.357",
  "references": [
    {
      "source": "7168b535-132a-4efe-a076-338f829b2eb9",
      "url": "https://web-material3.yokogawa.com/1/36974/files/YSAR-25-0001-E.pdf"
    }
  ],
  "sourceIdentifier": "7168b535-132a-4efe-a076-338f829b2eb9",
  "vulnStatus": "Deferred",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "CWE-1188"
        }
      ],
      "source": "7168b535-132a-4efe-a076-338f829b2eb9",
      "type": "Secondary"
    }
  ]
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.