CVE-2026-99547 (GCVE-0-2026-99547)

Vulnerability from cvelistv5 – Published: 2026-11-19 14:45 – Updated: 2026-11-19 14:45
VLAI
Title
thunderbolt: Do not RPM complete unrelated subtrees on unplug
Summary
In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Do not RPM complete unrelated subtrees on unplug When a Thunderbolt device is unplugged, that switch and every switch subsequent to it on the bus device list is `complete()`d, not just its child devices. In the case of multiple domains, it may cause, eg, an attempt to `complete()` the uninitialized domain 1 root switch RPM completion on unplug of a switch from domain 0 (though ordering is not guaranteed numerically sorted). I initially noticed this issue on a Dell XPS9720 when the system would seem to sporadically not wake after unplugging a Thunderbolt dock. I tried multiple kernel versions including v7.2.7 and v7.3-rc4 to see if that resolved the issue, but the issue persisted. Eventually I found that I could consistently generate a kernel Oops reporting a page fault at 0xffff_ffff_ffff_fff8 on unplug from one side of the laptop and went bug hunting. I became suspicious of the `bus_for_each_dev()` walk that I ultimately ended up changing. To confirm this issue, I did an eBPF trace of `bus_for_each_dev()`, `complete_rpm()`, and `complete()` while unplugging in a variety of situations and found that an unplug from domain 0 tries to `complete_rpm()` domain 1's switch, whose RPM completion is not initialized and thus is holding a null wait-list pointer, triggering the page fault. Here are the key sections of that eBPF trace. Note that HEAD denotes the completion's own wait-list HEAD: ``` RESCAN_ENTER domain=0 COMPLETE rescan_domain=0 target=0-1 target_domain=0 route=0x1 parent=0-0 unplugged=1 COMPLETION done=0 head=HEAD next=HEAD prev=HEAD BUS_WALK domain=0 start=0-1 callback=complete_rpm CALLBACK_ENTER rescan_domain=0 dev=1-0 parent=domain1 is_switch=1 COMPLETE rescan_domain=0 target=1-0 target_domain=1 route=0x0 parent=domain1 unplugged=0 COMPLETION done=0 head=HEAD next=0 prev=0 complete+5 complete_rpm+43 bus_for_each_dev+133 icm_free_unplugged_children+250 icm_rescan_work+42 ``` This patch gates the `complete()` on an additional condition - that the Thunderbolt domain matches the domain of the device that was unplugged. I only have a single system with multiple Thunderbolt domains - the Dell XPS9720. I am consistently able to reproduce the Oops on that system. Since running with this patch, I have not seen the Oops reoccur. I have also tested it on a Thinkpad X1-Gen12, and that system boots and runs well with it, but it only has a single Thunderbolt domain, so it does not exercise the multi-domain failure case.
Severity
No CVSS data available.
Assigner
Linux CNA under the mitre root
CNA scorecard D 53/100 over 7143 records in the last 180 days details
Impacted products
Vendor Product Version CPE status
Linux Linux Affected: 4f7c2e0d8765a0266b920c66ffc495fde44c1ec8 , < a7f354751b05ead5538176deadb9bc5b1fda0a3c (git)
Affected: 4f7c2e0d8765a0266b920c66ffc495fde44c1ec8 , < 85a8777c7ec5e17b999b4c9eb0c8cbf4ab936998 (git)
Affected: 4f7c2e0d8765a0266b920c66ffc495fde44c1ec8 , < e45356d83adce72fd99f57763eb3456c7c560857 (git)
Affected: 4f7c2e0d8765a0266b920c66ffc495fde44c1ec8 , < 96a8479804e3f7af43e639e9df39f562f1a75fd5 (git)
guessed Create a notification for this product.
Linux Linux Affected: 5.2
Unaffected: 0 , < 5.2 (semver)
Unaffected: 6.12.117 , ≤ 6.12.* (semver)
Unaffected: 6.18.61 , ≤ 6.18.* (semver)
Unaffected: 7.3.2 , ≤ 7.3.* (semver)
Unaffected: 7.4-rc1 , ≤ * (original_commit_for_fix)
guessed Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/thunderbolt/icm.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "a7f354751b05ead5538176deadb9bc5b1fda0a3c",
              "status": "affected",
              "version": "4f7c2e0d8765a0266b920c66ffc495fde44c1ec8",
              "versionType": "git"
            },
            {
              "lessThan": "85a8777c7ec5e17b999b4c9eb0c8cbf4ab936998",
              "status": "affected",
              "version": "4f7c2e0d8765a0266b920c66ffc495fde44c1ec8",
              "versionType": "git"
            },
            {
              "lessThan": "e45356d83adce72fd99f57763eb3456c7c560857",
              "status": "affected",
              "version": "4f7c2e0d8765a0266b920c66ffc495fde44c1ec8",
              "versionType": "git"
            },
            {
              "lessThan": "96a8479804e3f7af43e639e9df39f562f1a75fd5",
              "status": "affected",
              "version": "4f7c2e0d8765a0266b920c66ffc495fde44c1ec8",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/thunderbolt/icm.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "5.2"
            },
            {
              "lessThan": "5.2",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.117",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.61",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.3.*",
              "status": "unaffected",
              "version": "7.3.2",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.4-rc1",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.117",
                  "versionStartIncluding": "5.2",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.61",
                  "versionStartIncluding": "5.2",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.3.2",
                  "versionStartIncluding": "5.2",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.4-rc1",
                  "versionStartIncluding": "5.2",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nthunderbolt: Do not RPM complete unrelated subtrees on unplug\n\nWhen a Thunderbolt device is unplugged, that switch and every switch\nsubsequent to it on the bus device list is `complete()`d, not just its\nchild devices. In the case of multiple domains, it may cause, eg, an\nattempt to `complete()` the uninitialized domain 1 root switch RPM\ncompletion on unplug of a switch from domain 0 (though ordering is not\nguaranteed numerically sorted).\n\nI initially noticed this issue on a Dell XPS9720 when the system would\nseem to sporadically not wake after unplugging a Thunderbolt dock. I\ntried multiple kernel versions including v7.2.7 and v7.3-rc4 to see if\nthat resolved the issue, but the issue persisted. Eventually I found\nthat I could consistently generate a kernel Oops reporting a page fault\nat 0xffff_ffff_ffff_fff8 on unplug from one side of the laptop and went\nbug hunting. I became suspicious of the `bus_for_each_dev()` walk that I\nultimately ended up changing. To confirm this issue, I did an eBPF trace\nof `bus_for_each_dev()`, `complete_rpm()`, and `complete()` while\nunplugging in a variety of situations and found that an unplug from\ndomain 0 tries to `complete_rpm()` domain 1\u0027s switch, whose RPM\ncompletion is not initialized and thus is holding a null wait-list\npointer, triggering the page fault.\n\nHere are the key sections of that eBPF trace. Note that HEAD denotes the\ncompletion\u0027s own wait-list HEAD:\n\n```\nRESCAN_ENTER domain=0\n\nCOMPLETE rescan_domain=0 target=0-1 target_domain=0\n         route=0x1 parent=0-0 unplugged=1\nCOMPLETION done=0 head=HEAD next=HEAD prev=HEAD\n\nBUS_WALK domain=0 start=0-1 callback=complete_rpm\nCALLBACK_ENTER rescan_domain=0 dev=1-0 parent=domain1 is_switch=1\n\nCOMPLETE rescan_domain=0 target=1-0 target_domain=1\n         route=0x0 parent=domain1 unplugged=0\nCOMPLETION done=0 head=HEAD next=0 prev=0\n\n        complete+5\n        complete_rpm+43\n        bus_for_each_dev+133\n        icm_free_unplugged_children+250\n        icm_rescan_work+42\n```\n\nThis patch gates the `complete()` on an additional condition - that the\nThunderbolt domain matches the domain of the device that was unplugged.\n\nI only have a single system with multiple Thunderbolt domains - the Dell\nXPS9720. I am consistently able to reproduce the Oops on that system.\nSince running with this patch, I have not seen the Oops reoccur. I have\nalso tested it on a Thinkpad X1-Gen12, and that system boots and runs\nwell with it, but it only has a single Thunderbolt domain, so it does\nnot exercise the multi-domain failure case."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-11-19T14:45:08.097Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/a7f354751b05ead5538176deadb9bc5b1fda0a3c"
        },
        {
          "url": "https://git.kernel.org/stable/c/85a8777c7ec5e17b999b4c9eb0c8cbf4ab936998"
        },
        {
          "url": "https://git.kernel.org/stable/c/e45356d83adce72fd99f57763eb3456c7c560857"
        },
        {
          "url": "https://git.kernel.org/stable/c/96a8479804e3f7af43e639e9df39f562f1a75fd5"
        }
      ],
      "title": "thunderbolt: Do not RPM complete unrelated subtrees on unplug",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-99547",
    "datePublished": "2026-11-19T14:45:08.097Z",
    "dateReserved": "2026-09-25T10:25:14.421Z",
    "dateUpdated": "2026-11-19T14:45:08.097Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-99547",
      "date": "2026-11-20",
      "epss": "0.00157",
      "percentile": "0.04933"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "defaultStatus": "unaffected",
                "product": "Linux",
                "programFiles": [
                  "drivers/thunderbolt/icm.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "lessThan": "a7f354751b05ead5538176deadb9bc5b1fda0a3c",
                    "status": "affected",
                    "version": "4f7c2e0d8765a0266b920c66ffc495fde44c1ec8",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "85a8777c7ec5e17b999b4c9eb0c8cbf4ab936998",
                    "status": "affected",
                    "version": "4f7c2e0d8765a0266b920c66ffc495fde44c1ec8",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "e45356d83adce72fd99f57763eb3456c7c560857",
                    "status": "affected",
                    "version": "4f7c2e0d8765a0266b920c66ffc495fde44c1ec8",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "96a8479804e3f7af43e639e9df39f562f1a75fd5",
                    "status": "affected",
                    "version": "4f7c2e0d8765a0266b920c66ffc495fde44c1ec8",
                    "versionType": "git"
                  }
                ]
              },
              {
                "defaultStatus": "affected",
                "product": "Linux",
                "programFiles": [
                  "drivers/thunderbolt/icm.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "status": "affected",
                    "version": "5.2"
                  },
                  {
                    "lessThan": "5.2",
                    "status": "unaffected",
                    "version": "0",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.12.*",
                    "status": "unaffected",
                    "version": "6.12.117",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.18.*",
                    "status": "unaffected",
                    "version": "6.18.61",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "7.3.*",
                    "status": "unaffected",
                    "version": "7.3.2",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "*",
                    "status": "unaffected",
                    "version": "7.4-rc1",
                    "versionType": "original_commit_for_fix"
                  }
                ]
              }
            ],
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nthunderbolt: Do not RPM complete unrelated subtrees on unplug\n\nWhen a Thunderbolt device is unplugged, that switch and every switch\nsubsequent to it on the bus device list is `complete()`d, not just its\nchild devices. In the case of multiple domains, it may cause, eg, an\nattempt to `complete()` the uninitialized domain 1 root switch RPM\ncompletion on unplug of a switch from domain 0 (though ordering is not\nguaranteed numerically sorted).\n\nI initially noticed this issue on a Dell XPS9720 when the system would\nseem to sporadically not wake after unplugging a Thunderbolt dock. I\ntried multiple kernel versions including v7.2.7 and v7.3-rc4 to see if\nthat resolved the issue, but the issue persisted. Eventually I found\nthat I could consistently generate a kernel Oops reporting a page fault\nat 0xffff_ffff_ffff_fff8 on unplug from one side of the laptop and went\nbug hunting. I became suspicious of the `bus_for_each_dev()` walk that I\nultimately ended up changing. To confirm this issue, I did an eBPF trace\nof `bus_for_each_dev()`, `complete_rpm()`, and `complete()` while\nunplugging in a variety of situations and found that an unplug from\ndomain 0 tries to `complete_rpm()` domain 1\u0027s switch, whose RPM\ncompletion is not initialized and thus is holding a null wait-list\npointer, triggering the page fault.\n\nHere are the key sections of that eBPF trace. Note that HEAD denotes the\ncompletion\u0027s own wait-list HEAD:\n\n```\nRESCAN_ENTER domain=0\n\nCOMPLETE rescan_domain=0 target=0-1 target_domain=0\n         route=0x1 parent=0-0 unplugged=1\nCOMPLETION done=0 head=HEAD next=HEAD prev=HEAD\n\nBUS_WALK domain=0 start=0-1 callback=complete_rpm\nCALLBACK_ENTER rescan_domain=0 dev=1-0 parent=domain1 is_switch=1\n\nCOMPLETE rescan_domain=0 target=1-0 target_domain=1\n         route=0x0 parent=domain1 unplugged=0\nCOMPLETION done=0 head=HEAD next=0 prev=0\n\n        complete+5\n        complete_rpm+43\n        bus_for_each_dev+133\n        icm_free_unplugged_children+250\n        icm_rescan_work+42\n```\n\nThis patch gates the `complete()` on an additional condition - that the\nThunderbolt domain matches the domain of the device that was unplugged.\n\nI only have a single system with multiple Thunderbolt domains - the Dell\nXPS9720. I am consistently able to reproduce the Oops on that system.\nSince running with this patch, I have not seen the Oops reoccur. I have\nalso tested it on a Thinkpad X1-Gen12, and that system boots and runs\nwell with it, but it only has a single Thunderbolt domain, so it does\nnot exercise the multi-domain failure case."
          }
        ],
        "id": "CVE-2026-99547",
        "lastModified": "2026-11-19T15:18:10.910",
        "metrics": {},
        "published": "2026-11-19T15:18:10.910",
        "references": [
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/85a8777c7ec5e17b999b4c9eb0c8cbf4ab936998"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/96a8479804e3f7af43e639e9df39f562f1a75fd5"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/a7f354751b05ead5538176deadb9bc5b1fda0a3c"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/e45356d83adce72fd99f57763eb3456c7c560857"
          }
        ],
        "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "vulnStatus": "Received"
      }
    },
    "redhat_vex": {
      "aggregate_severity": "Moderate",
      "current_release_date": "2026-11-19T21:30:48+00:00",
      "cve": "CVE-2026-99547",
      "id": "CVE-2026-99547",
      "initial_release_date": "2026-11-19T14:45:08.097000+00:00",
      "product_status:known_affected": "162",
      "product_status:known_not_affected": "42",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: kernel: Denial of Service via Thunderbolt device unplug on multi-domain systems",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-99547.json",
      "version": "3"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.