CVE-2026-15923 (GCVE-0-2026-15923)

Vulnerability from cvelistv5 – Published: 2026-09-14 16:12 – Updated: 2026-11-04 05:00
VLAI
Title
Infinite loop denial of service in Zephyr SDIO byte-I/O from a card-supplied zero max_blk_size
Summary
The Zephyr SDIO subsystem function sdio_io_rw_extended_helper() in subsys/sd/sdio.c finishes transfers with a byte-I/O loop that uses size = MIN(remaining, func->cis.max_blk_size) as the per-iteration step. The value func->cis.max_blk_size is decoded directly from the SDIO card's CIS FUNCE tuple in sdio_decode_cis() and is not validated. When a card reports a maximum block size of zero, size is always 0, remaining never decreases, and the loop spins forever. The loop is reached from the public SDIO client API used by drivers, including sdio_read_fifo(), sdio_write_fifo(), and the incrementing register read/write helpers, each of which enters the loop while holding the per-card mutex func->card->lock. A card advertising max_blk_size == 0 therefore hangs the calling thread permanently on its first non-block-aligned transfer and never releases the mutex, denying service to the SDIO peripheral (and any subsystem such as Wi-Fi that depends on it) until the device is reset. The malicious value must come from the SDIO card itself, so the defect is exploitable where a removable SDIO/combo card slot lets an attacker insert a crafted or malfunctioning card (a physical attack vector); on boards with a soldered SDIO peripheral it is not attacker-influenceable. There is no memory-safety, confidentiality, or integrity impact — only a permanent availability loss. The fix returns -EIO when func->cis.max_blk_size is zero, before the loop is entered.
Severity
4.6 (Medium)
CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
SSVC
Exploitation: none Automatable: no Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-09-14 19:39 UTC
CWE
Assigner
zephyr CNA under the mitre root
CNA scorecard B 77/100 over 238 records in the last 180 days details
References
Impacted products
Vendor Product Version CPE status
zephyrproject zephyr Affected: 3.6.0 , < 4.3.2 (semver)
Affected: 4.4.0 , < 4.4.2 (semver)
guessed Create a notification for this product.
Show details on NVD website
To clipboard 

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-15923",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-09-14T19:39:59.149731Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-09-14T19:40:10.205Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
          "defaultStatus": "unaffected",
          "packageName": "zephyr",
          "product": "zephyr",
          "programFiles": [
            "subsys/sd/sdio.c"
          ],
          "programRoutines": [
            {
              "name": "sdio_io_rw_extended_helper"
            },
            {
              "name": "sdio_read_addr"
            },
            {
              "name": "sdio_read_fifo"
            },
            {
              "name": "sdio_write_addr"
            },
            {
              "name": "sdio_write_fifo"
            }
          ],
          "vendor": "zephyrproject",
          "versions": [
            {
              "lessThan": "4.3.2",
              "status": "affected",
              "version": "3.6.0",
              "versionType": "semver"
            },
            {
              "lessThan": "4.4.2",
              "status": "affected",
              "version": "4.4.0",
              "versionType": "semver"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "The Zephyr SDIO subsystem function sdio_io_rw_extended_helper() in subsys/sd/sdio.c finishes transfers with a byte-I/O loop that uses size = MIN(remaining, func-\u003ecis.max_blk_size) as the per-iteration step. The value func-\u003ecis.max_blk_size is decoded directly from the SDIO card\u0027s CIS FUNCE tuple in sdio_decode_cis() and is not validated. When a card reports a maximum block size of zero, size is always 0, remaining never decreases, and the loop spins forever.\n\nThe loop is reached from the public SDIO client API used by drivers, including sdio_read_fifo(), sdio_write_fifo(), and the incrementing register read/write helpers, each of which enters the loop while holding the per-card mutex func-\u003ecard-\u003elock. A card advertising max_blk_size == 0 therefore hangs the calling thread permanently on its first non-block-aligned transfer and never releases the mutex, denying service to the SDIO peripheral (and any subsystem such as Wi-Fi that depends on it) until the device is reset.\n\nThe malicious value must come from the SDIO card itself, so the defect is exploitable where a removable SDIO/combo card slot lets an attacker insert a crafted or malfunctioning card (a physical attack vector); on boards with a soldered SDIO peripheral it is not attacker-influenceable. There is no memory-safety, confidentiality, or integrity impact \u2014 only a permanent availability loss. The fix returns -EIO when func-\u003ecis.max_blk_size is zero, before the loop is entered."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "baseScore": 4.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "format": "CVSS"
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-835",
              "description": "dos",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-11-04T05:00:12.493Z",
        "orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
        "shortName": "zephyr"
      },
      "references": [
        {
          "name": "Fix commit",
          "tags": [
            "patch"
          ],
          "url": "https://github.com/zephyrproject-rtos/zephyr/commit/3b2f7aaee1f2ca52904c7e7f028951ba39456abd"
        },
        {
          "name": "GHSA-4pvm-wrcp-jjf5",
          "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-4pvm-wrcp-jjf5"
        }
      ],
      "title": "Infinite loop denial of service in Zephyr SDIO byte-I/O from a card-supplied zero max_blk_size",
      "x_generator": {
        "engine": "cvelib 1.8.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
    "assignerShortName": "zephyr",
    "cveId": "CVE-2026-15923",
    "datePublished": "2026-09-14T16:12:52.263Z",
    "dateReserved": "2026-07-16T04:55:24.186Z",
    "dateUpdated": "2026-11-04T05:00:12.493Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-15923",
      "date": "2026-11-15",
      "epss": "0.0023",
      "percentile": "0.13967"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
                "defaultStatus": "unaffected",
                "packageName": "zephyr",
                "product": "zephyr",
                "programFiles": [
                  "subsys/sd/sdio.c"
                ],
                "programRoutines": [
                  {
                    "name": "sdio_io_rw_extended_helper"
                  },
                  {
                    "name": "sdio_read_addr"
                  },
                  {
                    "name": "sdio_read_fifo"
                  },
                  {
                    "name": "sdio_write_addr"
                  },
                  {
                    "name": "sdio_write_fifo"
                  }
                ],
                "vendor": "zephyrproject",
                "versions": [
                  {
                    "lessThan": "4.3.2",
                    "status": "affected",
                    "version": "3.6.0",
                    "versionType": "semver"
                  },
                  {
                    "lessThan": "4.4.2",
                    "status": "affected",
                    "version": "4.4.0",
                    "versionType": "semver"
                  }
                ]
              }
            ],
            "source": "vulnerabilities@zephyrproject.org"
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "The Zephyr SDIO subsystem function sdio_io_rw_extended_helper() in subsys/sd/sdio.c finishes transfers with a byte-I/O loop that uses size = MIN(remaining, func-\u003ecis.max_blk_size) as the per-iteration step. The value func-\u003ecis.max_blk_size is decoded directly from the SDIO card\u0027s CIS FUNCE tuple in sdio_decode_cis() and is not validated. When a card reports a maximum block size of zero, size is always 0, remaining never decreases, and the loop spins forever.\n\nThe loop is reached from the public SDIO client API used by drivers, including sdio_read_fifo(), sdio_write_fifo(), and the incrementing register read/write helpers, each of which enters the loop while holding the per-card mutex func-\u003ecard-\u003elock. A card advertising max_blk_size == 0 therefore hangs the calling thread permanently on its first non-block-aligned transfer and never releases the mutex, denying service to the SDIO peripheral (and any subsystem such as Wi-Fi that depends on it) until the device is reset.\n\nThe malicious value must come from the SDIO card itself, so the defect is exploitable where a removable SDIO/combo card slot lets an attacker insert a crafted or malfunctioning card (a physical attack vector); on boards with a soldered SDIO peripheral it is not attacker-influenceable. There is no memory-safety, confidentiality, or integrity impact \u2014 only a permanent availability loss. The fix returns -EIO when func-\u003ecis.max_blk_size is zero, before the loop is entered."
          }
        ],
        "id": "CVE-2026-15923",
        "lastModified": "2026-11-04T05:18:44.407",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "LOW",
                "attackVector": "PHYSICAL",
                "availabilityImpact": "HIGH",
                "baseScore": 4.6,
                "baseSeverity": "MEDIUM",
                "confidentialityImpact": "NONE",
                "integrityImpact": "NONE",
                "privilegesRequired": "NONE",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                "version": "3.1"
              },
              "exploitabilityScore": 0.9,
              "impactScore": 3.6,
              "source": "vulnerabilities@zephyrproject.org",
              "type": "Secondary"
            }
          ],
          "ssvcV203": [
            {
              "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "ssvcData": {
                "id": "CVE-2026-15923",
                "options": [
                  {
                    "exploitation": "none"
                  },
                  {
                    "automatable": "no"
                  },
                  {
                    "technicalImpact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-09-14T19:39:59.149731Z",
                "version": "2.0.3"
              }
            }
          ]
        },
        "published": "2026-09-14T17:17:42.823",
        "references": [
          {
            "source": "vulnerabilities@zephyrproject.org",
            "url": "https://github.com/zephyrproject-rtos/zephyr/commit/3b2f7aaee1f2ca52904c7e7f028951ba39456abd"
          },
          {
            "source": "vulnerabilities@zephyrproject.org",
            "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-4pvm-wrcp-jjf5"
          }
        ],
        "sourceIdentifier": "vulnerabilities@zephyrproject.org",
        "vulnStatus": "Awaiting Analysis",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "CWE-835"
              }
            ],
            "source": "vulnerabilities@zephyrproject.org",
            "type": "Secondary"
          }
        ]
      }
    },
    "vulnrichment": {
      "containers": {
        "adp": [
          {
            "metrics": [
              {
                "other": {
                  "content": {
                    "id": "CVE-2026-15923",
                    "options": [
                      {
                        "Exploitation": "none"
                      },
                      {
                        "Automatable": "no"
                      },
                      {
                        "Technical Impact": "partial"
                      }
                    ],
                    "role": "CISA Coordinator",
                    "timestamp": "2026-09-14T19:39:59.149731Z",
                    "version": "2.0.3"
                  },
                  "type": "ssvc"
                }
              }
            ],
            "providerMetadata": {
              "dateUpdated": "2026-09-14T19:40:05.606Z",
              "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "shortName": "CISA-ADP"
            },
            "title": "CISA ADP Vulnrichment"
          }
        ],
        "cna": {
          "affected": [
            {
              "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
              "defaultStatus": "unaffected",
              "packageName": "zephyr",
              "product": "zephyr",
              "programFiles": [
                "subsys/sd/sdio.c"
              ],
              "programRoutines": [
                {
                  "name": "sdio_io_rw_extended_helper"
                },
                {
                  "name": "sdio_read_addr"
                },
                {
                  "name": "sdio_read_fifo"
                },
                {
                  "name": "sdio_write_addr"
                },
                {
                  "name": "sdio_write_fifo"
                }
              ],
              "vendor": "zephyrproject",
              "versions": [
                {
                  "lessThan": "4.3.2",
                  "status": "affected",
                  "version": "3.6.0",
                  "versionType": "semver"
                },
                {
                  "lessThan": "4.4.2",
                  "status": "affected",
                  "version": "4.4.0",
                  "versionType": "semver"
                }
              ]
            }
          ],
          "descriptions": [
            {
              "lang": "en",
              "value": "The Zephyr SDIO subsystem function sdio_io_rw_extended_helper() in subsys/sd/sdio.c finishes transfers with a byte-I/O loop that uses size = MIN(remaining, func-\u003ecis.max_blk_size) as the per-iteration step. The value func-\u003ecis.max_blk_size is decoded directly from the SDIO card\u0027s CIS FUNCE tuple in sdio_decode_cis() and is not validated. When a card reports a maximum block size of zero, size is always 0, remaining never decreases, and the loop spins forever.\n\nThe loop is reached from the public SDIO client API used by drivers, including sdio_read_fifo(), sdio_write_fifo(), and the incrementing register read/write helpers, each of which enters the loop while holding the per-card mutex func-\u003ecard-\u003elock. A card advertising max_blk_size == 0 therefore hangs the calling thread permanently on its first non-block-aligned transfer and never releases the mutex, denying service to the SDIO peripheral (and any subsystem such as Wi-Fi that depends on it) until the device is reset.\n\nThe malicious value must come from the SDIO card itself, so the defect is exploitable where a removable SDIO/combo card slot lets an attacker insert a crafted or malfunctioning card (a physical attack vector); on boards with a soldered SDIO peripheral it is not attacker-influenceable. There is no memory-safety, confidentiality, or integrity impact \u2014 only a permanent availability loss. The fix returns -EIO when func-\u003ecis.max_blk_size is zero, before the loop is entered."
            }
          ],
          "metrics": [
            {
              "cvssV3_1": {
                "baseScore": 4.6,
                "baseSeverity": "MEDIUM",
                "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                "version": "3.1"
              },
              "format": "CVSS"
            }
          ],
          "problemTypes": [
            {
              "descriptions": [
                {
                  "cweId": "CWE-835",
                  "description": "dos",
                  "lang": "en",
                  "type": "CWE"
                }
              ]
            }
          ],
          "providerMetadata": {
            "dateUpdated": "2026-11-04T05:00:12.493Z",
            "orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
            "shortName": "zephyr"
          },
          "references": [
            {
              "name": "Fix commit",
              "tags": [
                "patch"
              ],
              "url": "https://github.com/zephyrproject-rtos/zephyr/commit/3b2f7aaee1f2ca52904c7e7f028951ba39456abd"
            },
            {
              "name": "GHSA-4pvm-wrcp-jjf5",
              "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-4pvm-wrcp-jjf5"
            }
          ],
          "title": "Infinite loop denial of service in Zephyr SDIO byte-I/O from a card-supplied zero max_blk_size",
          "x_generator": {
            "engine": "cvelib 1.8.0"
          }
        }
      },
      "cveMetadata": {
        "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
        "assignerShortName": "zephyr",
        "cveId": "CVE-2026-15923",
        "datePublished": "2026-09-14T16:12:52.263Z",
        "dateReserved": "2026-07-16T04:55:24.186Z",
        "dateUpdated": "2026-11-04T05:00:12.493Z",
        "state": "PUBLISHED"
      },
      "dataType": "CVE_RECORD",
      "dataVersion": "5.2"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Loading timeline…




    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.