CVE-2026-11811 (GCVE-0-2026-11811)

Vulnerability from cvelistv5 – Published: 2026-08-10 22:55 – Updated: 2026-11-04 04:59
VLAI
Title
Socket file-descriptor leak in UpdateHub OTA client start_coap_client() leading to resource-exhaustion DoS
Summary
The UpdateHub over-the-air update client's start_coap_client() in subsys/mgmt/updatehub/updatehub.c leaks the CoAP/DTLS socket descriptor on its connection-setup failure paths. The shared error: cleanup gated socket closing on a ret > 0 flag, but ret was set to -1 immediately after the socket was created, so when zsock_setsockopt() (DTLS) or zsock_connect() subsequently failed the gate was false and cleanup_connection() was never called. The open descriptor in the global ctx.sock was then overwritten by the next attempt, permanently leaking it from the socket / net_context pool until reboot. The failing setup path is reached every time the OTA client tries to contact the UpdateHub server and the connection cannot be established — driven automatically by the periodic autohandler() poll (and on demand via the updatehub_probe()/updatehub_update() API or the updatehub run shell command). The DTLS handshake/connect outcome is influenceable by a network or on-path attacker who drops, resets, or otherwise disrupts traffic to the server, and also fails naturally whenever the server is unreachable. Each failed attempt permanently leaks one descriptor; once the shared socket pool is exhausted, networking degrades device-wide until the device is rebooted, a denial-of-service condition. Severity is low because the leak rate is bounded by the configured OTA poll interval (default once per 24 hours), the effect is gradual and recovered by reboot, and only builds with the UpdateHub client enabled are affected. There is no memory-corruption, information-disclosure, or authentication impact.
SSVC
Exploitation: none Automatable: no Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-08-12 18:50 UTC
CWE
Assigner
zephyr CNA under the mitre root
CNA scorecard B 77/100 over 238 records in the last 180 days details
Impacted products
Vendor Product Version CPE status
zephyrproject zephyr Affected: 2.0.0 , < 4.3.2 (semver)
Affected: 4.4.0 , < 4.4.2 (semver)
guessed Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-11811",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-08-12T18:50:29.995504Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-08-12T18:50:39.164Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
          "defaultStatus": "unaffected",
          "packageName": "zephyr",
          "product": "zephyr",
          "programFiles": [
            "subsys/mgmt/updatehub/updatehub.c"
          ],
          "vendor": "zephyrproject",
          "versions": [
            {
              "lessThan": "4.3.2",
              "status": "affected",
              "version": "2.0.0",
              "versionType": "semver"
            },
            {
              "lessThan": "4.4.2",
              "status": "affected",
              "version": "4.4.0",
              "versionType": "semver"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "The UpdateHub over-the-air update client\u0027s start_coap_client() in subsys/mgmt/updatehub/updatehub.c leaks the CoAP/DTLS socket descriptor on its connection-setup failure paths. The shared error: cleanup gated socket closing on a ret \u003e 0 flag, but ret was set to -1 immediately after the socket was created, so when zsock_setsockopt() (DTLS) or zsock_connect() subsequently failed the gate was false and cleanup_connection() was never called. The open descriptor in the global ctx.sock was then overwritten by the next attempt, permanently leaking it from the socket / net_context pool until reboot.\n\nThe failing setup path is reached every time the OTA client tries to contact the UpdateHub server and the connection cannot be established \u2014 driven automatically by the periodic autohandler() poll (and on demand via the updatehub_probe()/updatehub_update() API or the updatehub run shell command). The DTLS handshake/connect outcome is influenceable by a network or on-path attacker who drops, resets, or otherwise disrupts traffic to the server, and also fails naturally whenever the server is unreachable.\n\nEach failed attempt permanently leaks one descriptor; once the shared socket pool is exhausted, networking degrades device-wide until the device is rebooted, a denial-of-service condition. Severity is low because the leak rate is bounded by the configured OTA poll interval (default once per 24 hours), the effect is gradual and recovered by reboot, and only builds with the UpdateHub client enabled are affected. There is no memory-corruption, information-disclosure, or authentication impact."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "format": "CVSS"
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-772",
              "description": "dos",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-11-04T04:59:12.346Z",
        "orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
        "shortName": "zephyr"
      },
      "references": [
        {
          "name": "Fix commit",
          "tags": [
            "patch"
          ],
          "url": "https://github.com/zephyrproject-rtos/zephyr/commit/29e3476501a65c0bcd469abd275749d324008ce2"
        },
        {
          "name": "GHSA-q3mh-4wj7-mq7f",
          "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-q3mh-4wj7-mq7f"
        }
      ],
      "title": "Socket file-descriptor leak in UpdateHub OTA client start_coap_client() leading to resource-exhaustion DoS",
      "x_generator": {
        "engine": "cvelib 1.8.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
    "assignerShortName": "zephyr",
    "cveId": "CVE-2026-11811",
    "datePublished": "2026-08-10T22:55:17.389Z",
    "dateReserved": "2026-06-09T15:51:49.726Z",
    "dateUpdated": "2026-11-04T04:59:12.346Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-11811",
      "date": "2026-11-15",
      "epss": "0.00405",
      "percentile": "0.35264"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
                "defaultStatus": "unaffected",
                "packageName": "zephyr",
                "product": "zephyr",
                "programFiles": [
                  "subsys/mgmt/updatehub/updatehub.c"
                ],
                "vendor": "zephyrproject",
                "versions": [
                  {
                    "lessThan": "4.3.2",
                    "status": "affected",
                    "version": "2.0.0",
                    "versionType": "semver"
                  },
                  {
                    "lessThan": "4.4.2",
                    "status": "affected",
                    "version": "4.4.0",
                    "versionType": "semver"
                  }
                ]
              }
            ],
            "source": "vulnerabilities@zephyrproject.org"
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "The UpdateHub over-the-air update client\u0027s start_coap_client() in subsys/mgmt/updatehub/updatehub.c leaks the CoAP/DTLS socket descriptor on its connection-setup failure paths. The shared error: cleanup gated socket closing on a ret \u003e 0 flag, but ret was set to -1 immediately after the socket was created, so when zsock_setsockopt() (DTLS) or zsock_connect() subsequently failed the gate was false and cleanup_connection() was never called. The open descriptor in the global ctx.sock was then overwritten by the next attempt, permanently leaking it from the socket / net_context pool until reboot.\n\nThe failing setup path is reached every time the OTA client tries to contact the UpdateHub server and the connection cannot be established \u2014 driven automatically by the periodic autohandler() poll (and on demand via the updatehub_probe()/updatehub_update() API or the updatehub run shell command). The DTLS handshake/connect outcome is influenceable by a network or on-path attacker who drops, resets, or otherwise disrupts traffic to the server, and also fails naturally whenever the server is unreachable.\n\nEach failed attempt permanently leaks one descriptor; once the shared socket pool is exhausted, networking degrades device-wide until the device is rebooted, a denial-of-service condition. Severity is low because the leak rate is bounded by the configured OTA poll interval (default once per 24 hours), the effect is gradual and recovered by reboot, and only builds with the UpdateHub client enabled are affected. There is no memory-corruption, information-disclosure, or authentication impact."
          },
          {
            "lang": "es",
            "value": "El start_coap_client() del cliente de actualizaci\u00f3n por aire (OTA) de UpdateHub en subsys/mgmt/updatehub/updatehub.c filtra el descriptor de socket CoAP/DTLS en sus rutas de fallo de establecimiento de conexi\u00f3n. El error compartido: el cierre del socket controlado por la limpieza depend\u00eda de un indicador \u2019ret \u003e 0\u2019, pero \u2019ret\u2019 se estableci\u00f3 en -1 inmediatamente despu\u00e9s de la creaci\u00f3n del socket, por lo que cuando zsock_setsockopt() (DTLS) o zsock_connect() fallaron posteriormente, la condici\u00f3n era falsa y cleanup_connection() nunca fue llamada. El descriptor abierto en el \u2019ctx.sock\u2019 global fue entonces sobrescrito por el siguiente intento, filtr\u00e1ndolo permanentemente del pool de sockets / \u2019net_context\u2019 hasta el reinicio.\n\nLa ruta de configuraci\u00f3n fallida se alcanza cada vez que el cliente OTA intenta contactar al servidor UpdateHub y la conexi\u00f3n no puede establecerse - impulsado autom\u00e1ticamente por el sondeo peri\u00f3dico de autohandler() (y bajo demanda a trav\u00e9s de la API updatehub_probe()/updatehub_update() o el comando de shell \u2019updatehub run\u2019). El resultado del handshake/conexi\u00f3n DTLS puede ser influenciado por un atacante de red o en ruta que descarta, reinicia o interrumpe de otra manera el tr\u00e1fico hacia el servidor, y tambi\u00e9n falla naturalmente cuando el servidor es inalcanzable.\n\nCada intento fallido filtra permanentemente un descriptor; una vez que el pool de sockets compartido se agota, la red se degrada en todo el dispositivo hasta que este se reinicia, una condici\u00f3n de denegaci\u00f3n de servicio. La severidad es baja porque la tasa de fuga est\u00e1 limitada por el intervalo de sondeo OTA configurado (por defecto una vez cada 24 horas), el efecto es gradual y se recupera con un reinicio, y solo las compilaciones con el cliente UpdateHub habilitado se ven afectadas. No hay impacto en la corrupci\u00f3n de memoria, divulgaci\u00f3n de informaci\u00f3n o autenticaci\u00f3n."
          }
        ],
        "id": "CVE-2026-11811",
        "lastModified": "2026-11-04T05:18:30.363",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "HIGH",
                "attackVector": "NETWORK",
                "availabilityImpact": "LOW",
                "baseScore": 3.7,
                "baseSeverity": "LOW",
                "confidentialityImpact": "NONE",
                "integrityImpact": "NONE",
                "privilegesRequired": "NONE",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L",
                "version": "3.1"
              },
              "exploitabilityScore": 2.2,
              "impactScore": 1.4,
              "source": "vulnerabilities@zephyrproject.org",
              "type": "Secondary"
            }
          ],
          "ssvcV203": [
            {
              "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "ssvcData": {
                "id": "CVE-2026-11811",
                "options": [
                  {
                    "exploitation": "none"
                  },
                  {
                    "automatable": "no"
                  },
                  {
                    "technicalImpact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-08-12T18:50:29.995504Z",
                "version": "2.0.3"
              }
            }
          ]
        },
        "published": "2026-08-10T23:16:50.893",
        "references": [
          {
            "source": "vulnerabilities@zephyrproject.org",
            "url": "https://github.com/zephyrproject-rtos/zephyr/commit/29e3476501a65c0bcd469abd275749d324008ce2"
          },
          {
            "source": "vulnerabilities@zephyrproject.org",
            "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-q3mh-4wj7-mq7f"
          }
        ],
        "sourceIdentifier": "vulnerabilities@zephyrproject.org",
        "vulnStatus": "Awaiting Analysis",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "CWE-772"
              }
            ],
            "source": "vulnerabilities@zephyrproject.org",
            "type": "Secondary"
          }
        ]
      }
    },
    "vulnrichment": {
      "containers": {
        "adp": [
          {
            "metrics": [
              {
                "other": {
                  "content": {
                    "id": "CVE-2026-11811",
                    "options": [
                      {
                        "Exploitation": "none"
                      },
                      {
                        "Automatable": "no"
                      },
                      {
                        "Technical Impact": "partial"
                      }
                    ],
                    "role": "CISA Coordinator",
                    "timestamp": "2026-08-12T18:50:29.995504Z",
                    "version": "2.0.3"
                  },
                  "type": "ssvc"
                }
              }
            ],
            "providerMetadata": {
              "dateUpdated": "2026-08-12T18:50:35.008Z",
              "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "shortName": "CISA-ADP"
            },
            "title": "CISA ADP Vulnrichment"
          }
        ],
        "cna": {
          "affected": [
            {
              "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
              "defaultStatus": "unaffected",
              "packageName": "zephyr",
              "product": "zephyr",
              "programFiles": [
                "subsys/mgmt/updatehub/updatehub.c"
              ],
              "vendor": "zephyrproject",
              "versions": [
                {
                  "lessThan": "4.3.2",
                  "status": "affected",
                  "version": "2.0.0",
                  "versionType": "semver"
                },
                {
                  "lessThan": "4.4.2",
                  "status": "affected",
                  "version": "4.4.0",
                  "versionType": "semver"
                }
              ]
            }
          ],
          "descriptions": [
            {
              "lang": "en",
              "value": "The UpdateHub over-the-air update client\u0027s start_coap_client() in subsys/mgmt/updatehub/updatehub.c leaks the CoAP/DTLS socket descriptor on its connection-setup failure paths. The shared error: cleanup gated socket closing on a ret \u003e 0 flag, but ret was set to -1 immediately after the socket was created, so when zsock_setsockopt() (DTLS) or zsock_connect() subsequently failed the gate was false and cleanup_connection() was never called. The open descriptor in the global ctx.sock was then overwritten by the next attempt, permanently leaking it from the socket / net_context pool until reboot.\n\nThe failing setup path is reached every time the OTA client tries to contact the UpdateHub server and the connection cannot be established \u2014 driven automatically by the periodic autohandler() poll (and on demand via the updatehub_probe()/updatehub_update() API or the updatehub run shell command). The DTLS handshake/connect outcome is influenceable by a network or on-path attacker who drops, resets, or otherwise disrupts traffic to the server, and also fails naturally whenever the server is unreachable.\n\nEach failed attempt permanently leaks one descriptor; once the shared socket pool is exhausted, networking degrades device-wide until the device is rebooted, a denial-of-service condition. Severity is low because the leak rate is bounded by the configured OTA poll interval (default once per 24 hours), the effect is gradual and recovered by reboot, and only builds with the UpdateHub client enabled are affected. There is no memory-corruption, information-disclosure, or authentication impact."
            }
          ],
          "metrics": [
            {
              "cvssV3_1": {
                "baseScore": 3.7,
                "baseSeverity": "LOW",
                "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L",
                "version": "3.1"
              },
              "format": "CVSS"
            }
          ],
          "problemTypes": [
            {
              "descriptions": [
                {
                  "cweId": "CWE-772",
                  "description": "dos",
                  "lang": "en",
                  "type": "CWE"
                }
              ]
            }
          ],
          "providerMetadata": {
            "dateUpdated": "2026-11-04T04:59:12.346Z",
            "orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
            "shortName": "zephyr"
          },
          "references": [
            {
              "name": "Fix commit",
              "tags": [
                "patch"
              ],
              "url": "https://github.com/zephyrproject-rtos/zephyr/commit/29e3476501a65c0bcd469abd275749d324008ce2"
            },
            {
              "name": "GHSA-q3mh-4wj7-mq7f",
              "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-q3mh-4wj7-mq7f"
            }
          ],
          "title": "Socket file-descriptor leak in UpdateHub OTA client start_coap_client() leading to resource-exhaustion DoS",
          "x_generator": {
            "engine": "cvelib 1.8.0"
          }
        }
      },
      "cveMetadata": {
        "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
        "assignerShortName": "zephyr",
        "cveId": "CVE-2026-11811",
        "datePublished": "2026-08-10T22:55:17.389Z",
        "dateReserved": "2026-06-09T15:51:49.726Z",
        "dateUpdated": "2026-11-04T04:59:12.346Z",
        "state": "PUBLISHED"
      },
      "dataType": "CVE_RECORD",
      "dataVersion": "5.2"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.