CVE-2025-22125 (GCVE-0-2025-22125)
Vulnerability from cvelistv5 – Published: 2025-04-16 14:13 – Updated: 2026-11-05 20:41
VLAI
EPSS
VEX
Title
md/raid1,raid10: don't ignore IO flags
Summary
In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: don't ignore IO flags
If blk-wbt is enabled by default, it's found that raid write performance
is quite bad because all IO are throttled by wbt of underlying disks,
due to flag REQ_IDLE is ignored. And turns out this behaviour exist since
blk-wbt is introduced.
Other than REQ_IDLE, other flags should not be ignored as well, for
example REQ_META can be set for filesystems, clearing it can cause priority
reverse problems; And REQ_NOWAIT should not be cleared as well, because
io will wait instead of failing directly in underlying disks.
Fix those problems by keep IO flags from master bio.
Fises: f51d46d0e7cb ("md: add support for REQ_NOWAIT")
Severity
No CVSS data available.
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-11-05 20:39 UTC
Assigner
References
Impacted products
2 products
| Vendor | Product | Version | CPE status | |
|---|---|---|---|---|
| Linux | Linux |
Affected:
5404bc7a87b9949cf61e0174b21f80e73239ab25 , < 10f4ff4baeb6951cf58282954318827b6852d501
(git)
Affected: 5404bc7a87b9949cf61e0174b21f80e73239ab25 , < 73506e581c0b1814cdfd2229d589f30751d7de26 (git) Affected: 5404bc7a87b9949cf61e0174b21f80e73239ab25 , < 8a0adf3d778c4a0893c6d34a9e1b0082a6f1c495 (git) Affected: 5404bc7a87b9949cf61e0174b21f80e73239ab25 , < e879a0d9cb086c8e52ce6c04e5bfa63825a6213c (git) |
guessed | |
| Linux | Linux |
Affected:
2.6.19
Unaffected: 0 , < 2.6.19 (semver) Unaffected: 6.6.136 , ≤ 6.6.* (semver) Unaffected: 6.12.46 , ≤ 6.12.* (semver) Unaffected: 6.14.2 , ≤ 6.14.* (semver) Unaffected: 6.15 , ≤ * (original_commit_for_fix) |
guessed |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2025-22125",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-05T20:39:03.278698Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-05T20:41:50.912Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/md/raid1.c",
"drivers/md/raid10.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "10f4ff4baeb6951cf58282954318827b6852d501",
"status": "affected",
"version": "5404bc7a87b9949cf61e0174b21f80e73239ab25",
"versionType": "git"
},
{
"lessThan": "73506e581c0b1814cdfd2229d589f30751d7de26",
"status": "affected",
"version": "5404bc7a87b9949cf61e0174b21f80e73239ab25",
"versionType": "git"
},
{
"lessThan": "8a0adf3d778c4a0893c6d34a9e1b0082a6f1c495",
"status": "affected",
"version": "5404bc7a87b9949cf61e0174b21f80e73239ab25",
"versionType": "git"
},
{
"lessThan": "e879a0d9cb086c8e52ce6c04e5bfa63825a6213c",
"status": "affected",
"version": "5404bc7a87b9949cf61e0174b21f80e73239ab25",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/md/raid1.c",
"drivers/md/raid10.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "2.6.19"
},
{
"lessThan": "2.6.19",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.136",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.46",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.14.*",
"status": "unaffected",
"version": "6.14.2",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "6.15",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.136",
"versionStartIncluding": "2.6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.46",
"versionStartIncluding": "2.6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.14.2",
"versionStartIncluding": "2.6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.15",
"versionStartIncluding": "2.6.19",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nmd/raid1,raid10: don\u0027t ignore IO flags\n\nIf blk-wbt is enabled by default, it\u0027s found that raid write performance\nis quite bad because all IO are throttled by wbt of underlying disks,\ndue to flag REQ_IDLE is ignored. And turns out this behaviour exist since\nblk-wbt is introduced.\n\nOther than REQ_IDLE, other flags should not be ignored as well, for\nexample REQ_META can be set for filesystems, clearing it can cause priority\nreverse problems; And REQ_NOWAIT should not be cleared as well, because\nio will wait instead of failing directly in underlying disks.\n\nFix those problems by keep IO flags from master bio.\n\nFises: f51d46d0e7cb (\"md: add support for REQ_NOWAIT\")"
}
],
"providerMetadata": {
"dateUpdated": "2026-05-11T21:13:27.100Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/10f4ff4baeb6951cf58282954318827b6852d501"
},
{
"url": "https://git.kernel.org/stable/c/73506e581c0b1814cdfd2229d589f30751d7de26"
},
{
"url": "https://git.kernel.org/stable/c/8a0adf3d778c4a0893c6d34a9e1b0082a6f1c495"
},
{
"url": "https://git.kernel.org/stable/c/e879a0d9cb086c8e52ce6c04e5bfa63825a6213c"
}
],
"title": "md/raid1,raid10: don\u0027t ignore IO flags",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2025-22125",
"datePublished": "2025-04-16T14:13:08.779Z",
"dateReserved": "2024-12-29T08:45:45.823Z",
"dateUpdated": "2026-11-05T20:41:50.912Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2025-22125",
"date": "2026-11-15",
"epss": "0.00194",
"percentile": "0.09204"
},
"microsoft_vex": {
"current_release_date": "2026-09-13T01:50:19.000Z",
"cve": "CVE-2025-22125",
"id": "msrc_CVE-2025-22125",
"initial_release_date": "2025-09-03T21:54:28.000Z",
"product_status:fixed": "1",
"product_status:known_affected": "15",
"source": "Microsoft CSAF VEX",
"status": "final",
"title": "md/raid1,raid10: don\u0027t ignore IO flags",
"url": "https://msrc.microsoft.com/csaf/vex/2025/msrc_cve-2025-22125.json",
"version": "13"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/md/raid1.c",
"drivers/md/raid10.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "10f4ff4baeb6951cf58282954318827b6852d501",
"status": "affected",
"version": "5404bc7a87b9949cf61e0174b21f80e73239ab25",
"versionType": "git"
},
{
"lessThan": "73506e581c0b1814cdfd2229d589f30751d7de26",
"status": "affected",
"version": "5404bc7a87b9949cf61e0174b21f80e73239ab25",
"versionType": "git"
},
{
"lessThan": "8a0adf3d778c4a0893c6d34a9e1b0082a6f1c495",
"status": "affected",
"version": "5404bc7a87b9949cf61e0174b21f80e73239ab25",
"versionType": "git"
},
{
"lessThan": "e879a0d9cb086c8e52ce6c04e5bfa63825a6213c",
"status": "affected",
"version": "5404bc7a87b9949cf61e0174b21f80e73239ab25",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/md/raid1.c",
"drivers/md/raid10.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "2.6.19"
},
{
"lessThan": "2.6.19",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.136",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.46",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.14.*",
"status": "unaffected",
"version": "6.14.2",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "6.15",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"configurations": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "FE5F2FD2-E9C2-4521-AED1-C65EBA5BF5D0",
"versionEndExcluding": "6.12.46",
"versionStartIncluding": "2.6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "633A38C1-75C8-452D-8F1C-DA0269FD2687",
"versionEndExcluding": "6.14.2",
"versionStartIncluding": "6.13",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nmd/raid1,raid10: don\u0027t ignore IO flags\n\nIf blk-wbt is enabled by default, it\u0027s found that raid write performance\nis quite bad because all IO are throttled by wbt of underlying disks,\ndue to flag REQ_IDLE is ignored. And turns out this behaviour exist since\nblk-wbt is introduced.\n\nOther than REQ_IDLE, other flags should not be ignored as well, for\nexample REQ_META can be set for filesystems, clearing it can cause priority\nreverse problems; And REQ_NOWAIT should not be cleared as well, because\nio will wait instead of failing directly in underlying disks.\n\nFix those problems by keep IO flags from master bio.\n\nFises: f51d46d0e7cb (\"md: add support for REQ_NOWAIT\")"
},
{
"lang": "es",
"value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: md/raid1,raid10: no ignorar los indicadores de E/S. Si blk-wbt est\u00e1 habilitado por defecto, el rendimiento de escritura en RAID es bastante bajo, ya que todas las E/S son limitadas por wbt de los discos subyacentes, debido a que se ignora el indicador REQ_IDLE. Resulta que este comportamiento existe desde la introducci\u00f3n de blk-wbt. Adem\u00e1s de REQ_IDLE, tampoco se deben ignorar otros indicadores; por ejemplo, se puede configurar REQ_META para sistemas de archivos; borrarlo puede causar problemas de inversi\u00f3n de prioridad. REQ_NOWAIT tampoco se debe borrar, ya que la E/S esperar\u00e1 en lugar de fallar directamente en los discos subyacentes. Para solucionar estos problemas, mantenga los indicadores de E/S de la bios maestra. Fises: f51d46d0e7cb (\"md: a\u00f1adir soporte para REQ_NOWAIT\")"
}
],
"id": "CVE-2025-22125",
"lastModified": "2026-11-05T21:17:49.280",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 5.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
},
"exploitabilityScore": 1.8,
"impactScore": 3.6,
"source": "nvd@nist.gov",
"type": "Primary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2025-22125",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-05T20:39:03.278698Z",
"version": "2.0.3"
}
}
]
},
"published": "2025-04-16T15:16:06.630",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/10f4ff4baeb6951cf58282954318827b6852d501"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/73506e581c0b1814cdfd2229d589f30751d7de26"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/8a0adf3d778c4a0893c6d34a9e1b0082a6f1c495"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/e879a0d9cb086c8e52ce6c04e5bfa63825a6213c"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Modified",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "NVD-CWE-noinfo"
}
],
"source": "nvd@nist.gov",
"type": "Primary"
}
]
}
},
"redhat_vex": {
"aggregate_severity": "Moderate",
"current_release_date": "2026-11-05T15:24:10+00:00",
"cve": "CVE-2025-22125",
"id": "CVE-2025-22125",
"initial_release_date": "2025-04-16T00:00:00+00:00",
"product_status:known_affected": "199",
"product_status:known_not_affected": "1",
"source": "Red Hat CSAF VEX",
"status": "final",
"title": "kernel: md/raid1,raid10: don\u0027t ignore IO flags",
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2025/cve-2025-22125.json",
"version": "3"
},
"vulnrichment": {
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2025-22125",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-05T20:39:03.278698Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-05T20:39:04.490Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/md/raid1.c",
"drivers/md/raid10.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "10f4ff4baeb6951cf58282954318827b6852d501",
"status": "affected",
"version": "5404bc7a87b9949cf61e0174b21f80e73239ab25",
"versionType": "git"
},
{
"lessThan": "73506e581c0b1814cdfd2229d589f30751d7de26",
"status": "affected",
"version": "5404bc7a87b9949cf61e0174b21f80e73239ab25",
"versionType": "git"
},
{
"lessThan": "8a0adf3d778c4a0893c6d34a9e1b0082a6f1c495",
"status": "affected",
"version": "5404bc7a87b9949cf61e0174b21f80e73239ab25",
"versionType": "git"
},
{
"lessThan": "e879a0d9cb086c8e52ce6c04e5bfa63825a6213c",
"status": "affected",
"version": "5404bc7a87b9949cf61e0174b21f80e73239ab25",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/md/raid1.c",
"drivers/md/raid10.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "2.6.19"
},
{
"lessThan": "2.6.19",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.136",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.46",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.14.*",
"status": "unaffected",
"version": "6.14.2",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "6.15",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.136",
"versionStartIncluding": "2.6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.46",
"versionStartIncluding": "2.6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.14.2",
"versionStartIncluding": "2.6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.15",
"versionStartIncluding": "2.6.19",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nmd/raid1,raid10: don\u0027t ignore IO flags\n\nIf blk-wbt is enabled by default, it\u0027s found that raid write performance\nis quite bad because all IO are throttled by wbt of underlying disks,\ndue to flag REQ_IDLE is ignored. And turns out this behaviour exist since\nblk-wbt is introduced.\n\nOther than REQ_IDLE, other flags should not be ignored as well, for\nexample REQ_META can be set for filesystems, clearing it can cause priority\nreverse problems; And REQ_NOWAIT should not be cleared as well, because\nio will wait instead of failing directly in underlying disks.\n\nFix those problems by keep IO flags from master bio.\n\nFises: f51d46d0e7cb (\"md: add support for REQ_NOWAIT\")"
}
],
"providerMetadata": {
"dateUpdated": "2026-05-11T21:13:27.100Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/10f4ff4baeb6951cf58282954318827b6852d501"
},
{
"url": "https://git.kernel.org/stable/c/73506e581c0b1814cdfd2229d589f30751d7de26"
},
{
"url": "https://git.kernel.org/stable/c/8a0adf3d778c4a0893c6d34a9e1b0082a6f1c495"
},
{
"url": "https://git.kernel.org/stable/c/e879a0d9cb086c8e52ce6c04e5bfa63825a6213c"
}
],
"title": "md/raid1,raid10: don\u0027t ignore IO flags",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2025-22125",
"datePublished": "2025-04-16T14:13:08.779Z",
"dateReserved": "2024-12-29T08:45:45.823Z",
"dateUpdated": "2026-11-05T20:41:50.912Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
}
}
Loading…
Loading…
Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline
Sightings and recorded dates, grouped by day · UTC
How durations are calculated
Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.
Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.
Loading timeline…
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.