CVE-2025-21839 (GCVE-0-2025-21839)

Vulnerability from cvelistv5 – Published: 2025-03-07 09:09 – Updated: 2026-05-11 21:07
VLAI
Title
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
Summary
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop Move the conditional loading of hardware DR6 with the guest's DR6 value out of the core .vcpu_run() loop to fix a bug where KVM can load hardware with a stale vcpu->arch.dr6. When the guest accesses a DR and host userspace isn't debugging the guest, KVM disables DR interception and loads the guest's values into hardware on VM-Enter and saves them on VM-Exit. This allows the guest to access DRs at will, e.g. so that a sequence of DR accesses to configure a breakpoint only generates one VM-Exit. For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest) and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop. But for DR6, the guest's value doesn't need to be loaded into hardware for KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas VMX requires software to manually load the guest value, and so loading the guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done _inside_ the core run loop. Unfortunately, saving the guest values on VM-Exit is initiated by common x86, again outside of the core run loop. If the guest modifies DR6 (in hardware, when DR interception is disabled), and then the next VM-Exit is a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and clobber the guest's actual value. The bug shows up primarily with nested VMX because KVM handles the VMX preemption timer in the fastpath, and the window between hardware DR6 being modified (in guest context) and DR6 being read by guest software is orders of magnitude larger in a nested setup. E.g. in non-nested, the VMX preemption timer would need to fire precisely between #DB injection and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the window where hardware DR6 is "dirty" extends all the way from L1 writing DR6 to VMRESUME (in L1). L1's view: ========== <L1 disables DR interception> CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0 A: L1 Writes DR6 CPU 0/KVM-7289 [023] d.... 2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1 B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec D: L1 reads DR6, arch.dr6 = 0 CPU 0/KVM-7289 [023] d.... 2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0 CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0 L2 reads DR6, L1 disables DR interception CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216 CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0 CPU 0/KVM-7289 [023] d.... 2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0 L2 detects failure CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 reason HLT L1 reads DR6 (confirms failure) CPU 0/KVM-7289 [023] d.... 2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0 L0's view: ========== L2 reads DR6, arch.dr6 = 0 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 L2 => L1 nested VM-Exit CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_exit: vcpu 23 reason VMREAD CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410. ---truncated---
Severity
No CVSS data available.
Assigner
References
Impacted products
Vendor Product Version
Linux Linux Affected: d67668e9dd76d98136048935723947156737932b , < 9efb2b99b96c86664bbdbdd2cdb354ac9627eb20 (git)
Affected: d67668e9dd76d98136048935723947156737932b , < 93eeb6df1605b3a24f38afdba7ab903ba6b64133 (git)
Affected: d67668e9dd76d98136048935723947156737932b , < a1723e9c53fe6431415be19302a56543daf503f5 (git)
Affected: d67668e9dd76d98136048935723947156737932b , < 4eb063de686bfcdfd03a8c801d1bbe87d2d5eb55 (git)
Affected: d67668e9dd76d98136048935723947156737932b , < d456de38d9eb753a4e9fde053c18d4ef8e485339 (git)
Affected: d67668e9dd76d98136048935723947156737932b , < c2fee09fc167c74a64adb08656cb993ea475197e (git)
Create a notification for this product.
Linux Linux Affected: 5.7
Unaffected: 0 , < 5.7 (semver)
Unaffected: 5.15.182 , ≤ 5.15.* (semver)
Unaffected: 6.1.138 , ≤ 6.1.* (semver)
Unaffected: 6.6.90 , ≤ 6.6.* (semver)
Unaffected: 6.12.16 , ≤ 6.12.* (semver)
Unaffected: 6.13.4 , ≤ 6.13.* (semver)
Unaffected: 6.14 , ≤ * (original_commit_for_fix)
Create a notification for this product.
Show details on NVD website
To clipboard 

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2025-11-03T19:37:57.827Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "url": "https://lists.debian.org/debian-lts-announce/2025/08/msg00010.html"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "arch/x86/include/asm/kvm-x86-ops.h",
            "arch/x86/include/asm/kvm_host.h",
            "arch/x86/kvm/svm/svm.c",
            "arch/x86/kvm/vmx/main.c",
            "arch/x86/kvm/vmx/vmx.c",
            "arch/x86/kvm/vmx/x86_ops.h",
            "arch/x86/kvm/x86.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "9efb2b99b96c86664bbdbdd2cdb354ac9627eb20",
              "status": "affected",
              "version": "d67668e9dd76d98136048935723947156737932b",
              "versionType": "git"
            },
            {
              "lessThan": "93eeb6df1605b3a24f38afdba7ab903ba6b64133",
              "status": "affected",
              "version": "d67668e9dd76d98136048935723947156737932b",
              "versionType": "git"
            },
            {
              "lessThan": "a1723e9c53fe6431415be19302a56543daf503f5",
              "status": "affected",
              "version": "d67668e9dd76d98136048935723947156737932b",
              "versionType": "git"
            },
            {
              "lessThan": "4eb063de686bfcdfd03a8c801d1bbe87d2d5eb55",
              "status": "affected",
              "version": "d67668e9dd76d98136048935723947156737932b",
              "versionType": "git"
            },
            {
              "lessThan": "d456de38d9eb753a4e9fde053c18d4ef8e485339",
              "status": "affected",
              "version": "d67668e9dd76d98136048935723947156737932b",
              "versionType": "git"
            },
            {
              "lessThan": "c2fee09fc167c74a64adb08656cb993ea475197e",
              "status": "affected",
              "version": "d67668e9dd76d98136048935723947156737932b",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "arch/x86/include/asm/kvm-x86-ops.h",
            "arch/x86/include/asm/kvm_host.h",
            "arch/x86/kvm/svm/svm.c",
            "arch/x86/kvm/vmx/main.c",
            "arch/x86/kvm/vmx/vmx.c",
            "arch/x86/kvm/vmx/x86_ops.h",
            "arch/x86/kvm/x86.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "5.7"
            },
            {
              "lessThan": "5.7",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.15.*",
              "status": "unaffected",
              "version": "5.15.182",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.138",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.90",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.16",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.13.*",
              "status": "unaffected",
              "version": "6.13.4",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "6.14",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.15.182",
                  "versionStartIncluding": "5.7",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.1.138",
                  "versionStartIncluding": "5.7",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.6.90",
                  "versionStartIncluding": "5.7",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.16",
                  "versionStartIncluding": "5.7",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.13.4",
                  "versionStartIncluding": "5.7",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.14",
                  "versionStartIncluding": "5.7",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nKVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop\n\nMove the conditional loading of hardware DR6 with the guest\u0027s DR6 value\nout of the core .vcpu_run() loop to fix a bug where KVM can load hardware\nwith a stale vcpu-\u003earch.dr6.\n\nWhen the guest accesses a DR and host userspace isn\u0027t debugging the guest,\nKVM disables DR interception and loads the guest\u0027s values into hardware on\nVM-Enter and saves them on VM-Exit.  This allows the guest to access DRs\nat will, e.g. so that a sequence of DR accesses to configure a breakpoint\nonly generates one VM-Exit.\n\nFor DR0-DR3, the logic/behavior is identical between VMX and SVM, and also\nidentical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest)\nand KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading\nDR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop.\n\nBut for DR6, the guest\u0027s value doesn\u0027t need to be loaded into hardware for\nKVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas\nVMX requires software to manually load the guest value, and so loading the\nguest\u0027s value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done\n_inside_ the core run loop.\n\nUnfortunately, saving the guest values on VM-Exit is initiated by common\nx86, again outside of the core run loop.  If the guest modifies DR6 (in\nhardware, when DR interception is disabled), and then the next VM-Exit is\na fastpath VM-Exit, KVM will reload hardware DR6 with vcpu-\u003earch.dr6 and\nclobber the guest\u0027s actual value.\n\nThe bug shows up primarily with nested VMX because KVM handles the VMX\npreemption timer in the fastpath, and the window between hardware DR6\nbeing modified (in guest context) and DR6 being read by guest software is\norders of magnitude larger in a nested setup.  E.g. in non-nested, the\nVMX preemption timer would need to fire precisely between #DB injection\nand the #DB handler\u0027s read of DR6, whereas with a KVM-on-KVM setup, the\nwindow where hardware DR6 is \"dirty\" extends all the way from L1 writing\nDR6 to VMRESUME (in L1).\n\n    L1\u0027s view:\n    ==========\n    \u003cL1 disables DR interception\u003e\n           CPU 0/KVM-7289    [023] d....  2925.640961: kvm_entry: vcpu 0\n A:  L1 Writes DR6\n           CPU 0/KVM-7289    [023] d....  2925.640963: \u003chack\u003e: Set DRs, DR6 = 0xffff0ff1\n\n B:        CPU 0/KVM-7289    [023] d....  2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec\n\n D: L1 reads DR6, arch.dr6 = 0\n           CPU 0/KVM-7289    [023] d....  2925.640969: \u003chack\u003e: Sync DRs, DR6 = 0xffff0ff0\n\n           CPU 0/KVM-7289    [023] d....  2925.640976: kvm_entry: vcpu 0\n    L2 reads DR6, L1 disables DR interception\n           CPU 0/KVM-7289    [023] d....  2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216\n           CPU 0/KVM-7289    [023] d....  2925.640983: kvm_entry: vcpu 0\n\n           CPU 0/KVM-7289    [023] d....  2925.640983: \u003chack\u003e: Set DRs, DR6 = 0xffff0ff0\n\n    L2 detects failure\n           CPU 0/KVM-7289    [023] d....  2925.640987: kvm_exit: vcpu 0 reason HLT\n    L1 reads DR6 (confirms failure)\n           CPU 0/KVM-7289    [023] d....  2925.640990: \u003chack\u003e: Sync DRs, DR6 = 0xffff0ff0\n\n    L0\u0027s view:\n    ==========\n    L2 reads DR6, arch.dr6 = 0\n          CPU 23/KVM-5046    [001] d....  3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216\n          CPU 23/KVM-5046    [001] .....  3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216\n\n    L2 =\u003e L1 nested VM-Exit\n          CPU 23/KVM-5046    [001] .....  3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216\n\n          CPU 23/KVM-5046    [001] d....  3410.005610: kvm_entry: vcpu 23\n          CPU 23/KVM-5046    [001] d....  3410.005611: kvm_exit: vcpu 23 reason VMREAD\n          CPU 23/KVM-5046    [001] d....  3410.005611: kvm_entry: vcpu 23\n          CPU 23/KVM-5046    [001] d....  3410.\n---truncated---"
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-05-11T21:07:30.210Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/9efb2b99b96c86664bbdbdd2cdb354ac9627eb20"
        },
        {
          "url": "https://git.kernel.org/stable/c/93eeb6df1605b3a24f38afdba7ab903ba6b64133"
        },
        {
          "url": "https://git.kernel.org/stable/c/a1723e9c53fe6431415be19302a56543daf503f5"
        },
        {
          "url": "https://git.kernel.org/stable/c/4eb063de686bfcdfd03a8c801d1bbe87d2d5eb55"
        },
        {
          "url": "https://git.kernel.org/stable/c/d456de38d9eb753a4e9fde053c18d4ef8e485339"
        },
        {
          "url": "https://git.kernel.org/stable/c/c2fee09fc167c74a64adb08656cb993ea475197e"
        }
      ],
      "title": "KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2025-21839",
    "datePublished": "2025-03-07T09:09:58.220Z",
    "dateReserved": "2024-12-29T08:45:45.777Z",
    "dateUpdated": "2026-05-11T21:07:30.210Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2025-21839",
      "date": "2026-05-25",
      "epss": "0.00024",
      "percentile": "0.07122"
    },
    "nvd": "{\"cve\":{\"id\":\"CVE-2025-21839\",\"sourceIdentifier\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"published\":\"2025-03-07T09:15:16.923\",\"lastModified\":\"2025-11-03T20:17:21.440\",\"vulnStatus\":\"Modified\",\"cveTags\":[],\"descriptions\":[{\"lang\":\"en\",\"value\":\"In the Linux kernel, the following vulnerability has been resolved:\\n\\nKVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop\\n\\nMove the conditional loading of hardware DR6 with the guest\u0027s DR6 value\\nout of the core .vcpu_run() loop to fix a bug where KVM can load hardware\\nwith a stale vcpu-\u003earch.dr6.\\n\\nWhen the guest accesses a DR and host userspace isn\u0027t debugging the guest,\\nKVM disables DR interception and loads the guest\u0027s values into hardware on\\nVM-Enter and saves them on VM-Exit.  This allows the guest to access DRs\\nat will, e.g. so that a sequence of DR accesses to configure a breakpoint\\nonly generates one VM-Exit.\\n\\nFor DR0-DR3, the logic/behavior is identical between VMX and SVM, and also\\nidentical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest)\\nand KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading\\nDR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop.\\n\\nBut for DR6, the guest\u0027s value doesn\u0027t need to be loaded into hardware for\\nKVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas\\nVMX requires software to manually load the guest value, and so loading the\\nguest\u0027s value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done\\n_inside_ the core run loop.\\n\\nUnfortunately, saving the guest values on VM-Exit is initiated by common\\nx86, again outside of the core run loop.  If the guest modifies DR6 (in\\nhardware, when DR interception is disabled), and then the next VM-Exit is\\na fastpath VM-Exit, KVM will reload hardware DR6 with vcpu-\u003earch.dr6 and\\nclobber the guest\u0027s actual value.\\n\\nThe bug shows up primarily with nested VMX because KVM handles the VMX\\npreemption timer in the fastpath, and the window between hardware DR6\\nbeing modified (in guest context) and DR6 being read by guest software is\\norders of magnitude larger in a nested setup.  E.g. in non-nested, the\\nVMX preemption timer would need to fire precisely between #DB injection\\nand the #DB handler\u0027s read of DR6, whereas with a KVM-on-KVM setup, the\\nwindow where hardware DR6 is \\\"dirty\\\" extends all the way from L1 writing\\nDR6 to VMRESUME (in L1).\\n\\n    L1\u0027s view:\\n    ==========\\n    \u003cL1 disables DR interception\u003e\\n           CPU 0/KVM-7289    [023] d....  2925.640961: kvm_entry: vcpu 0\\n A:  L1 Writes DR6\\n           CPU 0/KVM-7289    [023] d....  2925.640963: \u003chack\u003e: Set DRs, DR6 = 0xffff0ff1\\n\\n B:        CPU 0/KVM-7289    [023] d....  2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec\\n\\n D: L1 reads DR6, arch.dr6 = 0\\n           CPU 0/KVM-7289    [023] d....  2925.640969: \u003chack\u003e: Sync DRs, DR6 = 0xffff0ff0\\n\\n           CPU 0/KVM-7289    [023] d....  2925.640976: kvm_entry: vcpu 0\\n    L2 reads DR6, L1 disables DR interception\\n           CPU 0/KVM-7289    [023] d....  2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216\\n           CPU 0/KVM-7289    [023] d....  2925.640983: kvm_entry: vcpu 0\\n\\n           CPU 0/KVM-7289    [023] d....  2925.640983: \u003chack\u003e: Set DRs, DR6 = 0xffff0ff0\\n\\n    L2 detects failure\\n           CPU 0/KVM-7289    [023] d....  2925.640987: kvm_exit: vcpu 0 reason HLT\\n    L1 reads DR6 (confirms failure)\\n           CPU 0/KVM-7289    [023] d....  2925.640990: \u003chack\u003e: Sync DRs, DR6 = 0xffff0ff0\\n\\n    L0\u0027s view:\\n    ==========\\n    L2 reads DR6, arch.dr6 = 0\\n          CPU 23/KVM-5046    [001] d....  3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216\\n          CPU 23/KVM-5046    [001] .....  3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216\\n\\n    L2 =\u003e L1 nested VM-Exit\\n          CPU 23/KVM-5046    [001] .....  3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216\\n\\n          CPU 23/KVM-5046    [001] d....  3410.005610: kvm_entry: vcpu 23\\n          CPU 23/KVM-5046    [001] d....  3410.005611: kvm_exit: vcpu 23 reason VMREAD\\n          CPU 23/KVM-5046    [001] d....  3410.005611: kvm_entry: vcpu 23\\n          CPU 23/KVM-5046    [001] d....  3410.\\n---truncated---\"},{\"lang\":\"es\",\"value\":\"En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: KVM: x86: Cargar DR6 con valor de invitado solo antes de ingresar al bucle .vcpu_run() Mueva la carga condicional de DR6 de hardware con el valor DR6 del invitado fuera del bucle .vcpu_run() del n\u00facleo para corregir un error en el que KVM puede cargar hardware con un vcpu-\u0026gt;arch.dr6 obsoleto. Cuando el invitado accede a un DR y el espacio de usuario del host no est\u00e1 depurando el invitado, KVM deshabilita la intercepci\u00f3n de DR y carga los valores del invitado en el hardware en VM-Enter y los guarda en VM-Exit. Esto permite que el invitado acceda a los DR a voluntad, por ejemplo, para que una secuencia de accesos a DR para configurar un punto de interrupci\u00f3n solo genere una VM-Exit. Para DR0-DR3, la l\u00f3gica/comportamiento es id\u00e9ntico entre VMX y SVM, y tambi\u00e9n id\u00e9ntico entre KVM_DEBUGREG_BP_ENABLED (depuraci\u00f3n del invitado en el espacio de usuario) y KVM_DEBUGREG_WONT_EXIT (invitado que utiliza DR), y por lo tanto KVM gestiona la carga de DR0-DR3 en c\u00f3digo com\u00fan, _fuera_ del bucle kvm_x86_ops.vcpu_run() central. Pero para DR6, el valor del invitado no necesita cargarse en el hardware para KVM_DEBUGREG_BP_ENABLED, y SVM proporciona un campo VMCB dedicado, mientras que VMX requiere software para cargar manualmente el valor del invitado, y por lo tanto, la carga del valor del invitado en DR6 es gestionada por {svm,vmx}_vcpu_run(), es decir, se realiza _dentro_ del bucle de ejecuci\u00f3n central. Desafortunadamente, guardar los valores del invitado en VM-Exit lo inicia el x86 com\u00fan, nuevamente fuera del bucle de ejecuci\u00f3n central. Si el invitado modifica DR6 (en hardware, cuando la intercepci\u00f3n de DR est\u00e1 deshabilitada), y luego la siguiente salida de VM es una salida de VM de ruta r\u00e1pida, KVM volver\u00e1 a cargar el DR6 de hardware con vcpu-\u0026gt;arch.dr6 y destruir\u00e1 el valor real del invitado. El error aparece principalmente con VMX anidado porque KVM maneja el temporizador de preempci\u00f3n de VMX en la ruta r\u00e1pida, y la ventana entre la modificaci\u00f3n del DR6 de hardware (en el contexto del invitado) y la lectura del DR6 por parte del software del invitado es \u00f3rdenes de magnitud m\u00e1s grande en una configuraci\u00f3n anidada. Por ejemplo, en una configuraci\u00f3n no anidada, el temporizador de preempci\u00f3n de VMX deber\u00eda activarse precisamente entre la inyecci\u00f3n de #DB y la lectura de DR6 por parte del controlador #DB, mientras que con una configuraci\u00f3n KVM sobre KVM, la ventana donde el DR6 de hardware est\u00e1 \\\"sucio\\\" se extiende desde L1 escribiendo DR6 a VMRESUME (en L1). Vista de L1: ==========  CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0 A: L1 escribe DR6 CPU 0/KVM-7289 [023] d.... 2925.640963: : Establecer DR, DR6 = 0xffff0ff1 B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 motivo EXTERNAL_INTERRUPT intr_info 0x800000ec D: L1 lee DR6, arch.dr6 = 0 CPU 0/KVM-7289 [023] d.... 2925.640969: : Sincronizar DR, DR6 = 0xffff0ff0 CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0 L2 lee DR6, L1 deshabilita la intercepci\u00f3n de DR CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 motivo DR_ACCESS info1 0x0000000000000216 CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0 CPU 0/KVM-7289 [023] d.... 2925.640983: : Establecer DRs, DR6 = 0xffff0ff0 L2 detecta falla CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 motivo HLT L1 lee DR6 (confirma falla) CPU 0/KVM-7289 [023] d.... 2925.640990: : Sincronizar DRs, DR6 = 0xffff0ff0 Vista de L0: ========== L2 lee DR6, arch.dr6 = 0 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 motivo DR_ACCESS info1 0x0000000000000216 CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 motivo DR_ACCESS info1 0x0000000000000216 L2 =\u0026gt; L1 anidada VM-Salir CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: motivo: DR_ACCESS ext_inf1: 0x000000000000216 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410.005611: ---truncado---\"}],\"metrics\":{\"cvssMetricV31\":[{\"source\":\"nvd@nist.gov\",\"type\":\"Primary\",\"cvssData\":{\"version\":\"3.1\",\"vectorString\":\"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H\",\"baseScore\":5.5,\"baseSeverity\":\"MEDIUM\",\"attackVector\":\"LOCAL\",\"attackComplexity\":\"LOW\",\"privilegesRequired\":\"LOW\",\"userInteraction\":\"NONE\",\"scope\":\"UNCHANGED\",\"confidentialityImpact\":\"NONE\",\"integrityImpact\":\"NONE\",\"availabilityImpact\":\"HIGH\"},\"exploitabilityScore\":1.8,\"impactScore\":3.6}]},\"weaknesses\":[{\"source\":\"nvd@nist.gov\",\"type\":\"Primary\",\"description\":[{\"lang\":\"en\",\"value\":\"NVD-CWE-noinfo\"}]}],\"configurations\":[{\"nodes\":[{\"operator\":\"OR\",\"negate\":false,\"cpeMatch\":[{\"vulnerable\":true,\"criteria\":\"cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*\",\"versionStartIncluding\":\"5.7.1\",\"versionEndExcluding\":\"5.15.182\",\"matchCriteriaId\":\"6BF82506-8B48-4D5C-BCC2-B05ED33B935C\"},{\"vulnerable\":true,\"criteria\":\"cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*\",\"versionStartIncluding\":\"5.16\",\"versionEndExcluding\":\"6.1.138\",\"matchCriteriaId\":\"B6266F82-46B4-4D38-AC4A-54C92A1DFAB2\"},{\"vulnerable\":true,\"criteria\":\"cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*\",\"versionStartIncluding\":\"6.2\",\"versionEndExcluding\":\"6.6.90\",\"matchCriteriaId\":\"2BE1DB09-2D62-4C63-AF19-947300669741\"},{\"vulnerable\":true,\"criteria\":\"cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*\",\"versionStartIncluding\":\"6.7\",\"versionEndExcluding\":\"6.12.16\",\"matchCriteriaId\":\"13C8DB18-FC60-425F-84E5-3EDDEC61B2FC\"},{\"vulnerable\":true,\"criteria\":\"cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*\",\"versionStartIncluding\":\"6.13\",\"versionEndExcluding\":\"6.13.4\",\"matchCriteriaId\":\"2A2093ED-74A9-43F9-AC72-50030F374EA4\"},{\"vulnerable\":true,\"criteria\":\"cpe:2.3:o:linux:linux_kernel:5.7:-:*:*:*:*:*:*\",\"matchCriteriaId\":\"3D23CE42-BDB2-4216-8495-230ABE98FCDD\"},{\"vulnerable\":true,\"criteria\":\"cpe:2.3:o:linux:linux_kernel:5.7:rc6:*:*:*:*:*:*\",\"matchCriteriaId\":\"F1AB4A11-C03C-4ABB-B596-0EB3B0F1A8DF\"},{\"vulnerable\":true,\"criteria\":\"cpe:2.3:o:linux:linux_kernel:5.7:rc7:*:*:*:*:*:*\",\"matchCriteriaId\":\"9D26AE9C-D49F-4FE9-8A6A-5A7199B7436E\"},{\"vulnerable\":true,\"criteria\":\"cpe:2.3:o:linux:linux_kernel:6.14:rc1:*:*:*:*:*:*\",\"matchCriteriaId\":\"186716B6-2B66-4BD0-852E-D48E71C0C85F\"},{\"vulnerable\":true,\"criteria\":\"cpe:2.3:o:linux:linux_kernel:6.14:rc2:*:*:*:*:*:*\",\"matchCriteriaId\":\"0D3E781C-403A-498F-9DA9-ECEE50F41E75\"}]}]}],\"references\":[{\"url\":\"https://git.kernel.org/stable/c/4eb063de686bfcdfd03a8c801d1bbe87d2d5eb55\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"tags\":[\"Patch\"]},{\"url\":\"https://git.kernel.org/stable/c/93eeb6df1605b3a24f38afdba7ab903ba6b64133\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"tags\":[\"Patch\"]},{\"url\":\"https://git.kernel.org/stable/c/9efb2b99b96c86664bbdbdd2cdb354ac9627eb20\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"tags\":[\"Patch\"]},{\"url\":\"https://git.kernel.org/stable/c/a1723e9c53fe6431415be19302a56543daf503f5\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"tags\":[\"Patch\"]},{\"url\":\"https://git.kernel.org/stable/c/c2fee09fc167c74a64adb08656cb993ea475197e\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"tags\":[\"Patch\"]},{\"url\":\"https://git.kernel.org/stable/c/d456de38d9eb753a4e9fde053c18d4ef8e485339\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"tags\":[\"Patch\"]},{\"url\":\"https://lists.debian.org/debian-lts-announce/2025/08/msg00010.html\",\"source\":\"af854a3a-2127-422b-91ae-364da2661108\"}]}}"
  }
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.



Detection rules are retrieved from Rulezet.