CWE-400
Weakness DiscouragedUncontrolled Resource Consumption
Abstraction: Class · Status: Draft
The product does not properly control the allocation and maintenance of a limited resource.
Dimensions
- Behavior-Property: Uncontrolled
- Behavior-Type: Consumption
- Resource-Type: Resource
Mapping guidance
CWE-400 is intended for incorrect behaviors in which the product is expected to track and restrict how many resources it consumes, but CWE-400 is often misused because it is conflated with the "technical impact" of vulnerabilities in which resource consumption occurs. It is sometimes used for low-information vulnerability reports. It is a level-1 Class (i.e., a child of a Pillar).
Closely analyze the specific mistake that is causing resource consumption, and perform a CWE mapping for that mistake. Consider children/descendants.
Modes of introduction
The product could be operated in a system or environment with lower resource limits than expected, which might make it easier for attackers to consume all available resources.
The product could be configured with lower resource limits than expected, which might make it easier for attackers to consume all available resources.
The designer might not consider how to handle and throttle excessive resource requests, which typically requires careful planning to handle more gracefully than a crash or exit.
There are at least three distinct scenarios that can commonly lead to resource exhaustion:
Lack of throttling for the number of allocated resources.
Losing all references to a resource before reaching the shutdown stage.
Not closing/returning a resource after processing.
Resource exhaustion problems often occur due to an incorrect implementation of the following situations:
Error conditions and other exceptional circumstances.
Confusion over which part of the program is responsible for releasing the resource.
Detection methods
Automated Static Analysis
Automated static analysis typically has limited utility in recognizing resource exhaustion problems, except for program-independent system resources such as files, sockets, and processes. For system resources, automated static analysis may be able to detect circumstances in which resources are not released after they have expired. Automated analysis of configuration files may be able to detect settings that do not specify a maximum value.
Automated static analysis tools will not be appropriate for detecting exhaustion of custom resources, such as an intended security policy in which a bulletin board user is only allowed to make a limited number of posts per day.
Effectiveness: Limited
Automated Dynamic Analysis
Certain automated dynamic analysis techniques may be effective in spotting resource exhaustion problems, especially with resources such as processes, memory, and connections. The technique may involve generating a large number of requests to the product within a short time frame.
Effectiveness: Moderate
Fuzzing
While fuzzing is typically geared toward finding low-level implementation bugs, it can inadvertently find resource exhaustion problems. This can occur when the fuzzer generates a large number of test cases but does not restart the targeted product in between test cases. If an individual test case produces a crash, but it does not do so reliably, then an inability to handle resource exhaustion may be the cause.
Effectiveness: Opportunistic
Notes
Theoretical
Vulnerability theory is largely about how behaviors and resources interact. "Resource exhaustion" can be regarded as either a consequence or an attack, depending on the perspective. This entry is an attempt to reflect the underlying weaknesses that enable these attacks (or consequences) to take place.
Other
Database queries that take a long time to process are good DoS targets. An attacker would have to write a few lines of code to generate enough traffic to exceed the site's ability to keep up. This would effectively prevent authorized users from using the site at all. Resources can be exploited simply by ensuring that the target machine must do much more work and consume more resources in order to service a request than the attacker must do to initiate a request.
A prime example of this can be found in old switches that were vulnerable to "macof" attacks (so named for a tool developed by Dugsong). These attacks flooded a switch with random IP and MAC address combinations, therefore exhausting the switch's cache, which held the information of which port corresponded to which MAC addresses. Once this cache was exhausted, the switch would fail in an insecure way and would begin to act simply as a hub, broadcasting all traffic on all ports and allowing for basic sniffing attacks.
Limited resources include memory, file system storage, database connection pool entries, CPU, and others.
Content history
Suggested mappings to ISA/IEC 62443.
Suggested mappings to ISA/IEC 62443.
Provided diagram to improve CWE usability.
updated Time_of_Introduction
Suggested OWASP Top Ten 2004 mapping
updated Common_Consequences, Relationships, Other_Notes, Taxonomy_Mappings
updated Description, Name, Relationships
updated Description
updated Name, Relationships
updated Description, Relationships
updated Relationships
updated Common_Consequences, Demonstrative_Examples, Detection_Factors, Likelihood_of_Exploit, Observed_Examples, Other_Notes, Potential_Mitigations, References
updated Detection_Factors, Potential_Mitigations, References, Taxonomy_Mappings
updated Related_Attack_Patterns
updated Description
updated Demonstrative_Examples
updated Common_Consequences, Relationships, Taxonomy_Mappings
updated Demonstrative_Examples, Related_Attack_Patterns, Relationships, Taxonomy_Mappings
updated Relationships
updated Relationships, Taxonomy_Mappings
updated Related_Attack_Patterns, Relationships
updated Relationships
updated Applicable_Platforms, Demonstrative_Examples, Likelihood_of_Exploit, Potential_Mitigations, References, Relationships
updated References, Type
updated Alternate_Terms, Description, Name, Relationships, Taxonomy_Mappings, Theoretical_Notes
updated Related_Attack_Patterns, Relationships
updated Description, Relationships
updated Description, References, Related_Attack_Patterns, Relationships
updated Description, Maintenance_Notes
updated Relationships
updated Related_Attack_Patterns
updated Observed_Examples, Relationships
updated Observed_Examples, Relationships
updated Common_Consequences, Description, Detection_Factors, Maintenance_Notes, Related_Attack_Patterns, Taxonomy_Mappings
updated Demonstrative_Examples, Relationships, Taxonomy_Mappings
updated Mapping_Notes, Relationships
updated Relationships
updated Common_Consequences, Description, Diagram, Modes_of_Introduction, Other_Notes, Time_of_Introduction
updated Observed_Examples, References
updated Applicable_Platforms, Maintenance_Notes, Weakness_Ordinalities
updated Applicable_Platforms, Maintenance_Notes, Mapping_Notes, Other_Notes
updated Applicable_Platforms, Dimensions, References, Relationships, Taxonomy_Mappings
7207 vulnerabilities reference this CWE, most recent first.
CVE-2017-16013 (GCVE-0-2017-16013)
Vulnerability from cvelistv5 – Published: 2018-06-04 19:00 – Updated: 2024-09-17 04:09- CWE-400 - Denial of Service (CWE-400)
| URL | Tags |
|---|---|
| https://nodesecurity.io/advisories/335 | x_refsource_MISC |
| https://github.com/hapijs/hapi/issues/3466 | x_refsource_MISC |
| Vendor | Product | Version | |
|---|---|---|---|
| HackerOne | hapi node module |
Affected:
>= 15.0.0 <= 16.1.0
|
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T20:13:06.658Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "https://nodesecurity.io/advisories/335"
},
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "https://github.com/hapijs/hapi/issues/3466"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"product": "hapi node module",
"vendor": "HackerOne",
"versions": [
{
"status": "affected",
"version": "\u003e= 15.0.0 \u003c= 16.1.0"
}
]
}
],
"datePublic": "2018-04-26T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "hapi is a web and services application framework. When hapi \u003e= 15.0.0 \u003c= 16.1.0 encounters a malformed `accept-encoding` header an uncaught exception is thrown. This may cause hapi to crash or to hang the client connection until the timeout period is reached."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "Denial of Service (CWE-400)",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2018-06-04T18:57:01.000Z",
"orgId": "36234546-b8fa-4601-9d6f-f4e334aa8ea1",
"shortName": "hackerone"
},
"references": [
{
"tags": [
"x_refsource_MISC"
],
"url": "https://nodesecurity.io/advisories/335"
},
{
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/hapijs/hapi/issues/3466"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "support@hackerone.com",
"DATE_PUBLIC": "2018-04-26T00:00:00",
"ID": "CVE-2017-16013",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "hapi node module",
"version": {
"version_data": [
{
"version_value": "\u003e= 15.0.0 \u003c= 16.1.0"
}
]
}
}
]
},
"vendor_name": "HackerOne"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "hapi is a web and services application framework. When hapi \u003e= 15.0.0 \u003c= 16.1.0 encounters a malformed `accept-encoding` header an uncaught exception is thrown. This may cause hapi to crash or to hang the client connection until the timeout period is reached."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "Denial of Service (CWE-400)"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "https://nodesecurity.io/advisories/335",
"refsource": "MISC",
"url": "https://nodesecurity.io/advisories/335"
},
{
"name": "https://github.com/hapijs/hapi/issues/3466",
"refsource": "MISC",
"url": "https://github.com/hapijs/hapi/issues/3466"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "36234546-b8fa-4601-9d6f-f4e334aa8ea1",
"assignerShortName": "hackerone",
"cveId": "CVE-2017-16013",
"datePublished": "2018-06-04T19:00:00.000Z",
"dateReserved": "2017-10-29T00:00:00.000Z",
"dateUpdated": "2024-09-17T04:09:41.605Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2017-15133 (GCVE-0-2017-15133)
Vulnerability from cvelistv5 – Published: 2018-01-29 19:00 – Updated: 2024-09-16 22:56| URL | Tags |
|---|---|
| https://bugzilla.redhat.com/show_bug.cgi?id=1538763 | x_refsource_CONFIRM |
| https://github.com/miekg/dns/issues/627 | x_refsource_CONFIRM |
| Vendor | Product | Version | |
|---|---|---|---|
| Miek Gieben | miekg-dns |
Affected:
before 1.0.4
|
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T19:50:16.057Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1538763"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://github.com/miekg/dns/issues/627"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"product": "miekg-dns",
"vendor": "Miek Gieben",
"versions": [
{
"status": "affected",
"version": "before 1.0.4"
}
]
}
],
"datePublic": "2018-01-11T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A denial of service flaw was found in miekg-dns before 1.0.4. A remote attacker could use carefully timed TCP packets to block the DNS server from accepting new connections."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2018-01-29T18:57:01.000Z",
"orgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
"shortName": "redhat"
},
"references": [
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1538763"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://github.com/miekg/dns/issues/627"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "secalert@redhat.com",
"DATE_PUBLIC": "2018-01-11T00:00:00",
"ID": "CVE-2017-15133",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "miekg-dns",
"version": {
"version_data": [
{
"version_value": "before 1.0.4"
}
]
}
}
]
},
"vendor_name": "Miek Gieben"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "A denial of service flaw was found in miekg-dns before 1.0.4. A remote attacker could use carefully timed TCP packets to block the DNS server from accepting new connections."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-400"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "https://bugzilla.redhat.com/show_bug.cgi?id=1538763",
"refsource": "CONFIRM",
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1538763"
},
{
"name": "https://github.com/miekg/dns/issues/627",
"refsource": "CONFIRM",
"url": "https://github.com/miekg/dns/issues/627"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
"assignerShortName": "redhat",
"cveId": "CVE-2017-15133",
"datePublished": "2018-01-29T19:00:00.000Z",
"dateReserved": "2017-10-08T00:00:00.000Z",
"dateUpdated": "2024-09-16T22:56:27.008Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2017-15132 (GCVE-0-2017-15132)
Vulnerability from cvelistv5 – Published: 2018-01-25 20:00 – Updated: 2024-09-17 00:36| URL | Tags |
|---|---|
| https://github.com/dovecot/core/commit/1a29ed2f96… | x_refsource_CONFIRM |
| https://lists.debian.org/debian-lts-announce/2018… | mailing-listx_refsource_MLIST |
| https://bugzilla.redhat.com/show_bug.cgi?id=1532768 | x_refsource_CONFIRM |
| https://www.debian.org/security/2018/dsa-4130 | vendor-advisoryx_refsource_DEBIAN |
| https://usn.ubuntu.com/3556-1/ | vendor-advisoryx_refsource_UBUNTU |
| https://usn.ubuntu.com/3556-2/ | vendor-advisoryx_refsource_UBUNTU |
| https://www.dovecot.org/list/dovecot-news/2018-Fe… | mailing-listx_refsource_MLIST |
| Vendor | Product | Version | |
|---|---|---|---|
| The Dovecot Project | dovecot |
Affected:
2.0 up to 2.2.33 and 2.3.0
|
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T19:50:16.152Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://github.com/dovecot/core/commit/1a29ed2f96da1be22fa5a4d96c7583aa81b8b060.patch"
},
{
"name": "[debian-lts-announce] 20180331 [SECURITY] [DLA 1333-1] dovecot security update",
"tags": [
"mailing-list",
"x_refsource_MLIST",
"x_transferred"
],
"url": "https://lists.debian.org/debian-lts-announce/2018/03/msg00036.html"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1532768"
},
{
"name": "DSA-4130",
"tags": [
"vendor-advisory",
"x_refsource_DEBIAN",
"x_transferred"
],
"url": "https://www.debian.org/security/2018/dsa-4130"
},
{
"name": "USN-3556-1",
"tags": [
"vendor-advisory",
"x_refsource_UBUNTU",
"x_transferred"
],
"url": "https://usn.ubuntu.com/3556-1/"
},
{
"name": "USN-3556-2",
"tags": [
"vendor-advisory",
"x_refsource_UBUNTU",
"x_transferred"
],
"url": "https://usn.ubuntu.com/3556-2/"
},
{
"name": "[dovecot-news] 20180228 v2.2.34 released",
"tags": [
"mailing-list",
"x_refsource_MLIST",
"x_transferred"
],
"url": "https://www.dovecot.org/list/dovecot-news/2018-February/000370.html"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"product": "dovecot",
"vendor": "The Dovecot Project",
"versions": [
{
"status": "affected",
"version": "2.0 up to 2.2.33 and 2.3.0"
}
]
}
],
"datePublic": "2018-01-25T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A flaw was found in dovecot 2.0 up to 2.2.33 and 2.3.0. An abort of SASL authentication results in a memory leak in dovecot\u0027s auth client used by login processes. The leak has impact in high performance configuration where same login processes are reused and can cause the process to crash due to memory exhaustion."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2018-04-01T09:57:02.000Z",
"orgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
"shortName": "redhat"
},
"references": [
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://github.com/dovecot/core/commit/1a29ed2f96da1be22fa5a4d96c7583aa81b8b060.patch"
},
{
"name": "[debian-lts-announce] 20180331 [SECURITY] [DLA 1333-1] dovecot security update",
"tags": [
"mailing-list",
"x_refsource_MLIST"
],
"url": "https://lists.debian.org/debian-lts-announce/2018/03/msg00036.html"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1532768"
},
{
"name": "DSA-4130",
"tags": [
"vendor-advisory",
"x_refsource_DEBIAN"
],
"url": "https://www.debian.org/security/2018/dsa-4130"
},
{
"name": "USN-3556-1",
"tags": [
"vendor-advisory",
"x_refsource_UBUNTU"
],
"url": "https://usn.ubuntu.com/3556-1/"
},
{
"name": "USN-3556-2",
"tags": [
"vendor-advisory",
"x_refsource_UBUNTU"
],
"url": "https://usn.ubuntu.com/3556-2/"
},
{
"name": "[dovecot-news] 20180228 v2.2.34 released",
"tags": [
"mailing-list",
"x_refsource_MLIST"
],
"url": "https://www.dovecot.org/list/dovecot-news/2018-February/000370.html"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "secalert@redhat.com",
"DATE_PUBLIC": "2018-01-25T00:00:00",
"ID": "CVE-2017-15132",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "dovecot",
"version": {
"version_data": [
{
"version_value": "2.0 up to 2.2.33 and 2.3.0"
}
]
}
}
]
},
"vendor_name": "The Dovecot Project"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "A flaw was found in dovecot 2.0 up to 2.2.33 and 2.3.0. An abort of SASL authentication results in a memory leak in dovecot\u0027s auth client used by login processes. The leak has impact in high performance configuration where same login processes are reused and can cause the process to crash due to memory exhaustion."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-400"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "https://github.com/dovecot/core/commit/1a29ed2f96da1be22fa5a4d96c7583aa81b8b060.patch",
"refsource": "CONFIRM",
"url": "https://github.com/dovecot/core/commit/1a29ed2f96da1be22fa5a4d96c7583aa81b8b060.patch"
},
{
"name": "[debian-lts-announce] 20180331 [SECURITY] [DLA 1333-1] dovecot security update",
"refsource": "MLIST",
"url": "https://lists.debian.org/debian-lts-announce/2018/03/msg00036.html"
},
{
"name": "https://bugzilla.redhat.com/show_bug.cgi?id=1532768",
"refsource": "CONFIRM",
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1532768"
},
{
"name": "DSA-4130",
"refsource": "DEBIAN",
"url": "https://www.debian.org/security/2018/dsa-4130"
},
{
"name": "USN-3556-1",
"refsource": "UBUNTU",
"url": "https://usn.ubuntu.com/3556-1/"
},
{
"name": "USN-3556-2",
"refsource": "UBUNTU",
"url": "https://usn.ubuntu.com/3556-2/"
},
{
"name": "[dovecot-news] 20180228 v2.2.34 released",
"refsource": "MLIST",
"url": "https://www.dovecot.org/list/dovecot-news/2018-February/000370.html"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
"assignerShortName": "redhat",
"cveId": "CVE-2017-15132",
"datePublished": "2018-01-25T20:00:00.000Z",
"dateReserved": "2017-10-08T00:00:00.000Z",
"dateUpdated": "2024-09-17T00:36:33.953Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2017-15130 (GCVE-0-2017-15130)
Vulnerability from cvelistv5 – Published: 2018-03-02 15:00 – Updated: 2024-09-16 20:17| URL | Tags |
|---|---|
| https://usn.ubuntu.com/3587-1/ | vendor-advisoryx_refsource_UBUNTU |
| http://seclists.org/oss-sec/2018/q1/205 | mailing-listx_refsource_MLIST |
| https://lists.debian.org/debian-lts-announce/2018… | mailing-listx_refsource_MLIST |
| https://www.debian.org/security/2018/dsa-4130 | vendor-advisoryx_refsource_DEBIAN |
| https://usn.ubuntu.com/3587-2/ | vendor-advisoryx_refsource_UBUNTU |
| https://bugzilla.redhat.com/show_bug.cgi?id=1532356 | x_refsource_CONFIRM |
| https://www.dovecot.org/list/dovecot-news/2018-Fe… | mailing-listx_refsource_MLIST |
| Vendor | Product | Version | |
|---|---|---|---|
| The Dovecot Project | dovecot |
Affected:
before 2.2.34
|
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T19:50:16.075Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"name": "USN-3587-1",
"tags": [
"vendor-advisory",
"x_refsource_UBUNTU",
"x_transferred"
],
"url": "https://usn.ubuntu.com/3587-1/"
},
{
"name": "[oss-security] 20180301 Dovecot Security Advisory: CVE-2017-15130 TLS SNI config lookups are inefficient and can be used for DoS",
"tags": [
"mailing-list",
"x_refsource_MLIST",
"x_transferred"
],
"url": "http://seclists.org/oss-sec/2018/q1/205"
},
{
"name": "[debian-lts-announce] 20180331 [SECURITY] [DLA 1333-1] dovecot security update",
"tags": [
"mailing-list",
"x_refsource_MLIST",
"x_transferred"
],
"url": "https://lists.debian.org/debian-lts-announce/2018/03/msg00036.html"
},
{
"name": "DSA-4130",
"tags": [
"vendor-advisory",
"x_refsource_DEBIAN",
"x_transferred"
],
"url": "https://www.debian.org/security/2018/dsa-4130"
},
{
"name": "USN-3587-2",
"tags": [
"vendor-advisory",
"x_refsource_UBUNTU",
"x_transferred"
],
"url": "https://usn.ubuntu.com/3587-2/"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1532356"
},
{
"name": "[dovecot-news] 20180228 v2.2.34 released",
"tags": [
"mailing-list",
"x_refsource_MLIST",
"x_transferred"
],
"url": "https://www.dovecot.org/list/dovecot-news/2018-February/000370.html"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"product": "dovecot",
"vendor": "The Dovecot Project",
"versions": [
{
"status": "affected",
"version": "before 2.2.34"
}
]
}
],
"datePublic": "2018-02-28T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A denial of service flaw was found in dovecot before 2.2.34. An attacker able to generate random SNI server names could exploit TLS SNI configuration lookups, leading to excessive memory usage and the process to restart."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2018-04-03T09:57:01.000Z",
"orgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
"shortName": "redhat"
},
"references": [
{
"name": "USN-3587-1",
"tags": [
"vendor-advisory",
"x_refsource_UBUNTU"
],
"url": "https://usn.ubuntu.com/3587-1/"
},
{
"name": "[oss-security] 20180301 Dovecot Security Advisory: CVE-2017-15130 TLS SNI config lookups are inefficient and can be used for DoS",
"tags": [
"mailing-list",
"x_refsource_MLIST"
],
"url": "http://seclists.org/oss-sec/2018/q1/205"
},
{
"name": "[debian-lts-announce] 20180331 [SECURITY] [DLA 1333-1] dovecot security update",
"tags": [
"mailing-list",
"x_refsource_MLIST"
],
"url": "https://lists.debian.org/debian-lts-announce/2018/03/msg00036.html"
},
{
"name": "DSA-4130",
"tags": [
"vendor-advisory",
"x_refsource_DEBIAN"
],
"url": "https://www.debian.org/security/2018/dsa-4130"
},
{
"name": "USN-3587-2",
"tags": [
"vendor-advisory",
"x_refsource_UBUNTU"
],
"url": "https://usn.ubuntu.com/3587-2/"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1532356"
},
{
"name": "[dovecot-news] 20180228 v2.2.34 released",
"tags": [
"mailing-list",
"x_refsource_MLIST"
],
"url": "https://www.dovecot.org/list/dovecot-news/2018-February/000370.html"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "secalert@redhat.com",
"DATE_PUBLIC": "2018-02-28T00:00:00",
"ID": "CVE-2017-15130",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "dovecot",
"version": {
"version_data": [
{
"version_value": "before 2.2.34"
}
]
}
}
]
},
"vendor_name": "The Dovecot Project"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "A denial of service flaw was found in dovecot before 2.2.34. An attacker able to generate random SNI server names could exploit TLS SNI configuration lookups, leading to excessive memory usage and the process to restart."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-400"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "USN-3587-1",
"refsource": "UBUNTU",
"url": "https://usn.ubuntu.com/3587-1/"
},
{
"name": "[oss-security] 20180301 Dovecot Security Advisory: CVE-2017-15130 TLS SNI config lookups are inefficient and can be used for DoS",
"refsource": "MLIST",
"url": "http://seclists.org/oss-sec/2018/q1/205"
},
{
"name": "[debian-lts-announce] 20180331 [SECURITY] [DLA 1333-1] dovecot security update",
"refsource": "MLIST",
"url": "https://lists.debian.org/debian-lts-announce/2018/03/msg00036.html"
},
{
"name": "DSA-4130",
"refsource": "DEBIAN",
"url": "https://www.debian.org/security/2018/dsa-4130"
},
{
"name": "USN-3587-2",
"refsource": "UBUNTU",
"url": "https://usn.ubuntu.com/3587-2/"
},
{
"name": "https://bugzilla.redhat.com/show_bug.cgi?id=1532356",
"refsource": "CONFIRM",
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1532356"
},
{
"name": "[dovecot-news] 20180228 v2.2.34 released",
"refsource": "MLIST",
"url": "https://www.dovecot.org/list/dovecot-news/2018-February/000370.html"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
"assignerShortName": "redhat",
"cveId": "CVE-2017-15130",
"datePublished": "2018-03-02T15:00:00.000Z",
"dateReserved": "2017-10-08T00:00:00.000Z",
"dateUpdated": "2024-09-16T20:17:43.957Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2017-15119 (GCVE-0-2017-15119)
Vulnerability from cvelistv5 – Published: 2018-07-27 16:00 – Updated: 2024-08-05 19:50| URL | Tags |
|---|---|
| https://lists.gnu.org/archive/html/qemu-devel/201… | x_refsource_MISC |
| http://www.openwall.com/lists/oss-security/2017/11/28/9 | x_refsource_MISC |
| http://www.securityfocus.com/bid/102011 | vdb-entryx_refsource_BID |
| https://www.debian.org/security/2018/dsa-4213 | vendor-advisoryx_refsource_DEBIAN |
| https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2… | x_refsource_CONFIRM |
| https://access.redhat.com/errata/RHSA-2018:1104 | vendor-advisoryx_refsource_REDHAT |
| https://access.redhat.com/errata/RHSA-2018:1113 | vendor-advisoryx_refsource_REDHAT |
| https://usn.ubuntu.com/3575-1/ | vendor-advisoryx_refsource_UBUNTU |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T19:50:16.089Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "https://lists.gnu.org/archive/html/qemu-devel/2017-11/msg05044.html"
},
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "http://www.openwall.com/lists/oss-security/2017/11/28/9"
},
{
"name": "102011",
"tags": [
"vdb-entry",
"x_refsource_BID",
"x_transferred"
],
"url": "http://www.securityfocus.com/bid/102011"
},
{
"name": "DSA-4213",
"tags": [
"vendor-advisory",
"x_refsource_DEBIAN",
"x_transferred"
],
"url": "https://www.debian.org/security/2018/dsa-4213"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2017-15119"
},
{
"name": "RHSA-2018:1104",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT",
"x_transferred"
],
"url": "https://access.redhat.com/errata/RHSA-2018:1104"
},
{
"name": "RHSA-2018:1113",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT",
"x_transferred"
],
"url": "https://access.redhat.com/errata/RHSA-2018:1113"
},
{
"name": "USN-3575-1",
"tags": [
"vendor-advisory",
"x_refsource_UBUNTU",
"x_transferred"
],
"url": "https://usn.ubuntu.com/3575-1/"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"product": "qemu",
"vendor": "QEMU",
"versions": [
{
"status": "affected",
"version": "2.11"
}
]
}
],
"datePublic": "2017-11-23T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "The Network Block Device (NBD) server in Quick Emulator (QEMU) before 2.11 is vulnerable to a denial of service issue. It could occur if a client sent large option requests, making the server waste CPU time on reading up to 4GB per request. A client could use this flaw to keep the NBD server from serving other requests, resulting in DoS."
}
],
"metrics": [
{
"cvssV3_0": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "LOW",
"baseScore": 5.8,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "CHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:L",
"version": "3.0"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2018-07-28T09:57:01.000Z",
"orgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
"shortName": "redhat"
},
"references": [
{
"tags": [
"x_refsource_MISC"
],
"url": "https://lists.gnu.org/archive/html/qemu-devel/2017-11/msg05044.html"
},
{
"tags": [
"x_refsource_MISC"
],
"url": "http://www.openwall.com/lists/oss-security/2017/11/28/9"
},
{
"name": "102011",
"tags": [
"vdb-entry",
"x_refsource_BID"
],
"url": "http://www.securityfocus.com/bid/102011"
},
{
"name": "DSA-4213",
"tags": [
"vendor-advisory",
"x_refsource_DEBIAN"
],
"url": "https://www.debian.org/security/2018/dsa-4213"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2017-15119"
},
{
"name": "RHSA-2018:1104",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2018:1104"
},
{
"name": "RHSA-2018:1113",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2018:1113"
},
{
"name": "USN-3575-1",
"tags": [
"vendor-advisory",
"x_refsource_UBUNTU"
],
"url": "https://usn.ubuntu.com/3575-1/"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "secalert@redhat.com",
"ID": "CVE-2017-15119",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "qemu",
"version": {
"version_data": [
{
"version_value": "2.11"
}
]
}
}
]
},
"vendor_name": "QEMU"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "The Network Block Device (NBD) server in Quick Emulator (QEMU) before 2.11 is vulnerable to a denial of service issue. It could occur if a client sent large option requests, making the server waste CPU time on reading up to 4GB per request. A client could use this flaw to keep the NBD server from serving other requests, resulting in DoS."
}
]
},
"impact": {
"cvss": [
[
{
"vectorString": "5.8/CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:L",
"version": "3.0"
}
],
[
{
"vectorString": "4.3/AV:N/AC:M/Au:N/C:N/I:N/A:P",
"version": "2.0"
}
]
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-400"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "https://lists.gnu.org/archive/html/qemu-devel/2017-11/msg05044.html",
"refsource": "MISC",
"url": "https://lists.gnu.org/archive/html/qemu-devel/2017-11/msg05044.html"
},
{
"name": "http://www.openwall.com/lists/oss-security/2017/11/28/9",
"refsource": "MISC",
"url": "http://www.openwall.com/lists/oss-security/2017/11/28/9"
},
{
"name": "102011",
"refsource": "BID",
"url": "http://www.securityfocus.com/bid/102011"
},
{
"name": "DSA-4213",
"refsource": "DEBIAN",
"url": "https://www.debian.org/security/2018/dsa-4213"
},
{
"name": "https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2017-15119",
"refsource": "CONFIRM",
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2017-15119"
},
{
"name": "RHSA-2018:1104",
"refsource": "REDHAT",
"url": "https://access.redhat.com/errata/RHSA-2018:1104"
},
{
"name": "RHSA-2018:1113",
"refsource": "REDHAT",
"url": "https://access.redhat.com/errata/RHSA-2018:1113"
},
{
"name": "USN-3575-1",
"refsource": "UBUNTU",
"url": "https://usn.ubuntu.com/3575-1/"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
"assignerShortName": "redhat",
"cveId": "CVE-2017-15119",
"datePublished": "2018-07-27T16:00:00.000Z",
"dateReserved": "2017-10-08T00:00:00.000Z",
"dateUpdated": "2024-08-05T19:50:16.089Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2017-14028 (GCVE-0-2017-14028)
Vulnerability from cvelistv5 – Published: 2017-11-16 21:00 – Updated: 2024-08-05 19:13| URL | Tags |
|---|---|
| http://www.securityfocus.com/bid/101885 | vdb-entryx_refsource_BID |
| https://ics-cert.us-cert.gov/advisories/ICSA-17-320-01 | x_refsource_MISC |
| Vendor | Product | Version | |
|---|---|---|---|
| n/a | Moxa NPort 5110, 5130, and 5150 |
Affected:
Moxa NPort 5110, 5130, and 5150
|
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T19:13:41.532Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"name": "101885",
"tags": [
"vdb-entry",
"x_refsource_BID",
"x_transferred"
],
"url": "http://www.securityfocus.com/bid/101885"
},
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "https://ics-cert.us-cert.gov/advisories/ICSA-17-320-01"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"product": "Moxa NPort 5110, 5130, and 5150",
"vendor": "n/a",
"versions": [
{
"status": "affected",
"version": "Moxa NPort 5110, 5130, and 5150"
}
]
}
],
"datePublic": "2017-11-16T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A Resource Exhaustion issue was discovered in Moxa NPort 5110 Version 2.2, NPort 5110 Version 2.4, NPort 5110 Version 2.6, NPort 5110 Version 2.7, NPort 5130 Version 3.7 and prior, and NPort 5150 Version 3.7 and prior. An attacker may be able to exhaust memory resources by sending a large amount of TCP SYN packets."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2017-11-21T10:57:01.000Z",
"orgId": "7d14cffa-0d7d-4270-9dc0-52cabd5a23a6",
"shortName": "icscert"
},
"references": [
{
"name": "101885",
"tags": [
"vdb-entry",
"x_refsource_BID"
],
"url": "http://www.securityfocus.com/bid/101885"
},
{
"tags": [
"x_refsource_MISC"
],
"url": "https://ics-cert.us-cert.gov/advisories/ICSA-17-320-01"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "ics-cert@hq.dhs.gov",
"ID": "CVE-2017-14028",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "Moxa NPort 5110, 5130, and 5150",
"version": {
"version_data": [
{
"version_value": "Moxa NPort 5110, 5130, and 5150"
}
]
}
}
]
},
"vendor_name": "n/a"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "A Resource Exhaustion issue was discovered in Moxa NPort 5110 Version 2.2, NPort 5110 Version 2.4, NPort 5110 Version 2.6, NPort 5110 Version 2.7, NPort 5130 Version 3.7 and prior, and NPort 5150 Version 3.7 and prior. An attacker may be able to exhaust memory resources by sending a large amount of TCP SYN packets."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-400"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "101885",
"refsource": "BID",
"url": "http://www.securityfocus.com/bid/101885"
},
{
"name": "https://ics-cert.us-cert.gov/advisories/ICSA-17-320-01",
"refsource": "MISC",
"url": "https://ics-cert.us-cert.gov/advisories/ICSA-17-320-01"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "7d14cffa-0d7d-4270-9dc0-52cabd5a23a6",
"assignerShortName": "icscert",
"cveId": "CVE-2017-14028",
"datePublished": "2017-11-16T21:00:00.000Z",
"dateReserved": "2017-08-30T00:00:00.000Z",
"dateUpdated": "2024-08-05T19:13:41.532Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2017-12741 (GCVE-0-2017-12741)
Vulnerability from cvelistv5 – Published: 2017-12-26 04:00 – Updated: 2024-08-05 18:51- CWE-400 - Uncontrolled Resource Consumption
| URL | Tags |
|---|---|
| https://www.securityfocus.com/bid/101964 | vdb-entryx_refsource_BID |
| https://cert-portal.siemens.com/productcert/pdf/s… | x_refsource_CONFIRM |
| https://cert-portal.siemens.com/productcert/pdf/s… | x_refsource_CONFIRM |
| https://cert-portal.siemens.com/productcert/pdf/s… | x_refsource_CONFIRM |
| https://cert-portal.siemens.com/productcert/html/… | |
| https://cert-portal.siemens.com/productcert/html/… | |
| https://cert-portal.siemens.com/productcert/html/… |
50 of 86 products shown. All of them on the page of CVE-2017-12741.
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T18:51:06.315Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"name": "101964",
"tags": [
"vdb-entry",
"x_refsource_BID",
"x_transferred"
],
"url": "https://www.securityfocus.com/bid/101964"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-546832.pdf"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-346262.pdf"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-141614.pdf"
},
{
"tags": [
"x_transferred"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-346262.html"
},
{
"tags": [
"x_transferred"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-546832.html"
},
{
"tags": [
"x_transferred"
],
"url": "https://cert-portal.siemens.com/productcert/html/ssa-141614.html"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unknown",
"product": "Development/Evaluation Kits for PROFINET IO: DK Standard Ethernet Controller",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.1.1 Patch 05"
}
]
},
{
"defaultStatus": "unknown",
"product": "Development/Evaluation Kits for PROFINET IO: EK-ERTEC 200",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.5"
}
]
},
{
"defaultStatus": "unknown",
"product": "Development/Evaluation Kits for PROFINET IO: EK-ERTEC 200P",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.5"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC Compact Field Unit",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET 200AL IM 157-1 PN",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V1.0.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET 200M (incl. SIPLUS variants)",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET 200MP IM 155-5 PN BA",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.0.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET 200MP IM 155-5 PN HF",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.2.0",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET 200MP IM 155-5 PN ST",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.1.0",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET 200pro IM 154-3 PN HF",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET 200pro IM 154-4 PN HF",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET 200SP IM 155-6 PN BA",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET 200SP IM 155-6 PN HA (incl. SIPLUS variants)",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V1.1.0"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET 200SP IM 155-6 PN HF",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.2.0",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET 200SP IM 155-6 PN HS",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.0.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET 200SP IM 155-6 PN ST",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET 200SP IM 155-6 PN ST",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET 200SP IM 155-6 PN ST BA",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET 200SP IM 155-6 PN ST BA",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET200ecoPN, 16DI, DC24V, 8xM12",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET200ecoPN, 16DO DC24V/1,3A, 8xM12",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET200ecoPN, 4AO U/I 4xM12",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET200ecoPN, 8 DIO, DC24V/1,3A, 8xM12",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET200ecoPN, 8 DO, DC24V/2A, 8xM12",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET200ecoPN, 8AI RTD/TC 8xM12",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET200ecoPN, 8AI; 4 U/I; 4 RTD/TC 8xM12",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET200ecoPN, 8DI, DC24V, 4xM12",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET200ecoPN, 8DI, DC24V, 8xM12",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET200ecoPN, 8DO, DC24V/0,5A, 4xM12",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET200ecoPN, 8DO, DC24V/1,3A, 4xM12",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET200ecoPN, 8DO, DC24V/1,3A, 8xM12",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET200ecoPN: IO-Link Master",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC ET200S (incl. SIPLUS variants)",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC PN/PN Coupler (incl. SIPLUS NET variants)",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.2.0"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1200 CPU family (incl. SIPLUS variants)",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.2.3"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants)",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V2.0"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 Software Controller",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V2.0"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-200 SMART",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V2.03.01"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-300 CPU family (incl. related ET200 CPUs and SIPLUS variants)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.X.16",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-400 H V6\u00a0and below\u00a0CPU family (incl. SIPLUS variants)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V6.0.8",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-400 PN/DP V6 and below CPU family (incl. SIPLUS variants)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V6.0.6",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-400 PN/DP V7 CPU family (incl. SIPLUS variants)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V7.0.2",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-410 V8 CPU family (incl. SIPLUS variants)",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V8.2.1"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC TDC CP51M1",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V1.1.8",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC TDC CPU555",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V1.1.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC WinAC RTX 2010",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V2010 SP3"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC WinAC RTX F 2010",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V2010 SP3"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMOCODE pro V PROFINET (incl. SIPLUS variants)",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V2.1.1"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMOTION C",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V5.1 HF1"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMOTION D",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V5.1 HF1"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMOTION D4xx V4.4 for SINAMICS SM150i-2 w. PROFINET (incl. SIPLUS variants)",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.4 HF26"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMOTION P V4.4 and V4.5",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.5 HF5"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMOTION P V5",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V5.1 HF1"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS DCM w. PN",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V1.4 SP1 HF6"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS DCP w. PN",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V1.2 HF2"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS G110M w. PN",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.7 SP9 HF1"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS G120(C/P/D) w. PN (incl. SIPLUS variants)",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.7 SP9 HF1"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS G130 V4.7 w. PN",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.7 HF29"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS G130 V4.8 w. PN",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.8 HF4"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS G150 V4.7 w. PN",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.7 HF29"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS G150 V4.8 w. PN",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.8 HF4"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS GH150 V4.7 w. PROFINET",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.7 SP5 HF7"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS GL150 V4.7 w. PROFINET",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.8 SP2"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS GM150 V4.7 w. PROFINET",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.7 HF31"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS S110 w. PN",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.4 SP3 HF6"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS S120 prior to V4.7 w. PN (incl. SIPLUS variants)",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.7"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS S120 V4.7 SP1 w. PN (incl. SIPLUS variants)",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS S120 V4.7 w. PN (incl. SIPLUS variants)",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.7 HF29"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS S120 V4.8 w. PN (incl. SIPLUS variants)",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.8 HF5"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS S150 V4.7 w. PN",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.7 HF29"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS S150 V4.8 w. PN",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.8 HF4"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS SL150 V4.7.0 w. PROFINET",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.7 HF30"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS SL150 V4.7.4 w. PROFINET",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.8 SP2"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS SL150 V4.7.5 w. PROFINET",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.8 SP2"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS SM120 V4.7 w. PROFINET",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.8 SP2"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINAMICS V90 w. PN",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V1.02"
}
]
},
{
"defaultStatus": "unknown",
"product": "SINUMERIK 840D sl",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions \u003c V4.8 SP3"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS ET 200MP IM 155-5 PN HF",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.2.0",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS ET 200MP IM 155-5 PN HF",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.2.0",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS ET 200MP IM 155-5 PN HF T1 RAIL",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.2.0",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS ET 200MP IM 155-5 PN ST",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.1.0",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS ET 200MP IM 155-5 PN ST TX RAIL",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.1.0",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS ET 200SP IM 155-6 PN HF",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.2.0",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS ET 200SP IM 155-6 PN HF",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.2.0",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS ET 200SP IM 155-6 PN HF T1 RAIL",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V4.2.0",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS ET 200SP IM 155-6 PN ST",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS ET 200SP IM 155-6 PN ST",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS ET 200SP IM 155-6 PN ST BA",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS ET 200SP IM 155-6 PN ST BA",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS ET 200SP IM 155-6 PN ST BA TX RAIL",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS ET 200SP IM 155-6 PN ST BA TX RAIL",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS ET 200SP IM 155-6 PN ST TX RAIL",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS ET 200SP IM 155-6 PN ST TX RAIL",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIRIUS Soft Starter 3RW44 PN",
"vendor": "Siemens",
"versions": [
{
"status": "affected",
"version": "All versions"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "Specially crafted packets sent to port 161/udp could cause a denial of service condition. The affected devices must be restarted manually."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.5,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
}
},
{
"cvssV4_0": {
"baseScore": 8.7,
"baseSeverity": "HIGH",
"vectorString": "CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N",
"version": "4.0"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400: Uncontrolled Resource Consumption",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2024-07-09T12:03:53.948Z",
"orgId": "cec7a2ec-15b4-4faf-bd53-b40f371f3a77",
"shortName": "siemens"
},
"references": [
{
"name": "101964",
"tags": [
"vdb-entry",
"x_refsource_BID"
],
"url": "https://www.securityfocus.com/bid/101964"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-546832.pdf"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-346262.pdf"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://cert-portal.siemens.com/productcert/pdf/ssa-141614.pdf"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-346262.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-546832.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-141614.html"
}
]
}
},
"cveMetadata": {
"assignerOrgId": "cec7a2ec-15b4-4faf-bd53-b40f371f3a77",
"assignerShortName": "siemens",
"cveId": "CVE-2017-12741",
"datePublished": "2017-12-26T04:00:00.000Z",
"dateReserved": "2017-08-09T00:00:00.000Z",
"dateUpdated": "2024-08-05T18:51:06.315Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2017-12190 (GCVE-0-2017-12190)
Vulnerability from cvelistv5 – Published: 2017-11-22 18:00 – Updated: 2024-08-05 18:28| Vendor | Product | Version | |
|---|---|---|---|
| n/a | Linux kernel through v4.14-rc5 |
Affected:
Linux kernel through v4.14-rc5
|
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T18:28:16.645Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=2b04e8f6bbb196cab4b232af0f8d48ff2c7a8058"
},
{
"name": "101911",
"tags": [
"vdb-entry",
"x_refsource_BID",
"x_transferred"
],
"url": "http://www.securityfocus.com/bid/101911"
},
{
"name": "[debian-lts-announce] 20171210 [SECURITY] [DLA 1200-1] linux security update",
"tags": [
"mailing-list",
"x_refsource_MLIST",
"x_transferred"
],
"url": "https://lists.debian.org/debian-lts-announce/2017/12/msg00004.html"
},
{
"name": "USN-3583-2",
"tags": [
"vendor-advisory",
"x_refsource_UBUNTU",
"x_transferred"
],
"url": "https://usn.ubuntu.com/3583-2/"
},
{
"name": "RHSA-2018:1854",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT",
"x_transferred"
],
"url": "https://access.redhat.com/errata/RHSA-2018:1854"
},
{
"name": "USN-3582-1",
"tags": [
"vendor-advisory",
"x_refsource_UBUNTU",
"x_transferred"
],
"url": "https://usn.ubuntu.com/3582-1/"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "http://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.13.8"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=95d78c28b5a85bacbc29b8dba7c04babb9b0d467"
},
{
"name": "RHSA-2018:1062",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT",
"x_transferred"
],
"url": "https://access.redhat.com/errata/RHSA-2018:1062"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://github.com/torvalds/linux/commit/95d78c28b5a85bacbc29b8dba7c04babb9b0d467"
},
{
"name": "RHSA-2018:0654",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT",
"x_transferred"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0654"
},
{
"name": "USN-3583-1",
"tags": [
"vendor-advisory",
"x_refsource_UBUNTU",
"x_transferred"
],
"url": "https://usn.ubuntu.com/3583-1/"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1495089"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://github.com/torvalds/linux/commit/2b04e8f6bbb196cab4b232af0f8d48ff2c7a8058"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "http://seclists.org/oss-sec/2017/q4/52"
},
{
"name": "RHSA-2018:0676",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT",
"x_transferred"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0676"
},
{
"name": "USN-3582-2",
"tags": [
"vendor-advisory",
"x_refsource_UBUNTU",
"x_transferred"
],
"url": "https://usn.ubuntu.com/3582-2/"
},
{
"name": "RHSA-2019:1170",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT",
"x_transferred"
],
"url": "https://access.redhat.com/errata/RHSA-2019:1170"
},
{
"name": "RHSA-2019:1190",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT",
"x_transferred"
],
"url": "https://access.redhat.com/errata/RHSA-2019:1190"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://support.f5.com/csp/article/K93472064?utm_source=f5support\u0026amp%3Butm_medium=RSS"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"product": "Linux kernel through v4.14-rc5",
"vendor": "n/a",
"versions": [
{
"status": "affected",
"version": "Linux kernel through v4.14-rc5"
}
]
}
],
"datePublic": "2017-11-22T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "The bio_map_user_iov and bio_unmap_user functions in block/bio.c in the Linux kernel before 4.13.8 do unbalanced refcounting when a SCSI I/O vector has small consecutive buffers belonging to the same page. The bio_add_pc_page function merges them into one, but the page reference is never dropped. This causes a memory leak and possible system lockup (exploitable against the host OS by a guest OS user, if a SCSI disk is passed through to a virtual machine) due to an out-of-memory condition."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2019-11-13T02:06:45.000Z",
"orgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
"shortName": "redhat"
},
"references": [
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=2b04e8f6bbb196cab4b232af0f8d48ff2c7a8058"
},
{
"name": "101911",
"tags": [
"vdb-entry",
"x_refsource_BID"
],
"url": "http://www.securityfocus.com/bid/101911"
},
{
"name": "[debian-lts-announce] 20171210 [SECURITY] [DLA 1200-1] linux security update",
"tags": [
"mailing-list",
"x_refsource_MLIST"
],
"url": "https://lists.debian.org/debian-lts-announce/2017/12/msg00004.html"
},
{
"name": "USN-3583-2",
"tags": [
"vendor-advisory",
"x_refsource_UBUNTU"
],
"url": "https://usn.ubuntu.com/3583-2/"
},
{
"name": "RHSA-2018:1854",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2018:1854"
},
{
"name": "USN-3582-1",
"tags": [
"vendor-advisory",
"x_refsource_UBUNTU"
],
"url": "https://usn.ubuntu.com/3582-1/"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "http://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.13.8"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=95d78c28b5a85bacbc29b8dba7c04babb9b0d467"
},
{
"name": "RHSA-2018:1062",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2018:1062"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://github.com/torvalds/linux/commit/95d78c28b5a85bacbc29b8dba7c04babb9b0d467"
},
{
"name": "RHSA-2018:0654",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0654"
},
{
"name": "USN-3583-1",
"tags": [
"vendor-advisory",
"x_refsource_UBUNTU"
],
"url": "https://usn.ubuntu.com/3583-1/"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=1495089"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://github.com/torvalds/linux/commit/2b04e8f6bbb196cab4b232af0f8d48ff2c7a8058"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "http://seclists.org/oss-sec/2017/q4/52"
},
{
"name": "RHSA-2018:0676",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0676"
},
{
"name": "USN-3582-2",
"tags": [
"vendor-advisory",
"x_refsource_UBUNTU"
],
"url": "https://usn.ubuntu.com/3582-2/"
},
{
"name": "RHSA-2019:1170",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2019:1170"
},
{
"name": "RHSA-2019:1190",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2019:1190"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://support.f5.com/csp/article/K93472064?utm_source=f5support\u0026amp%3Butm_medium=RSS"
}
]
}
},
"cveMetadata": {
"assignerOrgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
"assignerShortName": "redhat",
"cveId": "CVE-2017-12190",
"datePublished": "2017-11-22T18:00:00.000Z",
"dateReserved": "2017-08-01T00:00:00.000Z",
"dateUpdated": "2024-08-05T18:28:16.645Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2017-12174 (GCVE-0-2017-12174)
Vulnerability from cvelistv5 – Published: 2018-03-07 22:00 – Updated: 2024-08-05 18:28| URL | Tags |
|---|---|
| https://access.redhat.com/errata/RHSA-2018:0479 | vendor-advisoryx_refsource_REDHAT |
| https://access.redhat.com/errata/RHSA-2018:0481 | vendor-advisoryx_refsource_REDHAT |
| https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2… | x_refsource_CONFIRM |
| https://access.redhat.com/errata/RHSA-2018:0269 | vendor-advisoryx_refsource_REDHAT |
| https://access.redhat.com/errata/RHSA-2018:0270 | vendor-advisoryx_refsource_REDHAT |
| https://access.redhat.com/errata/RHSA-2018:0271 | vendor-advisoryx_refsource_REDHAT |
| https://access.redhat.com/errata/RHSA-2018:0268 | vendor-advisoryx_refsource_REDHAT |
| https://access.redhat.com/errata/RHSA-2018:0480 | vendor-advisoryx_refsource_REDHAT |
| https://access.redhat.com/errata/RHSA-2018:0275 | vendor-advisoryx_refsource_REDHAT |
| https://access.redhat.com/errata/RHSA-2018:0478 | vendor-advisoryx_refsource_REDHAT |
| https://lists.apache.org/thread.html/rc96ad63f148… | mailing-listx_refsource_MLIST |
| https://lists.apache.org/thread.html/rb2fd3bf2dce… | mailing-listx_refsource_MLIST |
| Vendor | Product | Version | |
|---|---|---|---|
| Red Hat, Inc. | HornetQ/Artemis |
Affected:
before 2.4.0
|
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T18:28:16.599Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"name": "RHSA-2018:0479",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT",
"x_transferred"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0479"
},
{
"name": "RHSA-2018:0481",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT",
"x_transferred"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0481"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2017-12174"
},
{
"name": "RHSA-2018:0269",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT",
"x_transferred"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0269"
},
{
"name": "RHSA-2018:0270",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT",
"x_transferred"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0270"
},
{
"name": "RHSA-2018:0271",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT",
"x_transferred"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0271"
},
{
"name": "RHSA-2018:0268",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT",
"x_transferred"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0268"
},
{
"name": "RHSA-2018:0480",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT",
"x_transferred"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0480"
},
{
"name": "RHSA-2018:0275",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT",
"x_transferred"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0275"
},
{
"name": "RHSA-2018:0478",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT",
"x_transferred"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0478"
},
{
"name": "[activemq-commits] 20210127 [activemq-website] branch master updated: Publish CVE-2021-26118",
"tags": [
"mailing-list",
"x_refsource_MLIST",
"x_transferred"
],
"url": "https://lists.apache.org/thread.html/rc96ad63f148f784c84ea7f0a178c84a8985c6afccabbcd9847a82088%40%3Ccommits.activemq.apache.org%3E"
},
{
"name": "[activemq-commits] 20210127 [activemq-website] branch master updated: Publish CVE-2021-26117",
"tags": [
"mailing-list",
"x_refsource_MLIST",
"x_transferred"
],
"url": "https://lists.apache.org/thread.html/rb2fd3bf2dce042e0ab3f3c94c4767c96bb2e7e6737624d63162df36d%40%3Ccommits.activemq.apache.org%3E"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"product": "HornetQ/Artemis",
"vendor": "Red Hat, Inc.",
"versions": [
{
"status": "affected",
"version": "before 2.4.0"
}
]
}
],
"datePublic": "2018-02-05T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "It was found that when Artemis and HornetQ before 2.4.0 are configured with UDP discovery and JGroups discovery a huge byte array is created when receiving an unexpected multicast message. This may result in a heap memory exhaustion, full GC, or OutOfMemoryError."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2021-01-27T18:06:16.000Z",
"orgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
"shortName": "redhat"
},
"references": [
{
"name": "RHSA-2018:0479",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0479"
},
{
"name": "RHSA-2018:0481",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0481"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2017-12174"
},
{
"name": "RHSA-2018:0269",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0269"
},
{
"name": "RHSA-2018:0270",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0270"
},
{
"name": "RHSA-2018:0271",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0271"
},
{
"name": "RHSA-2018:0268",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0268"
},
{
"name": "RHSA-2018:0480",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0480"
},
{
"name": "RHSA-2018:0275",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0275"
},
{
"name": "RHSA-2018:0478",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2018:0478"
},
{
"name": "[activemq-commits] 20210127 [activemq-website] branch master updated: Publish CVE-2021-26118",
"tags": [
"mailing-list",
"x_refsource_MLIST"
],
"url": "https://lists.apache.org/thread.html/rc96ad63f148f784c84ea7f0a178c84a8985c6afccabbcd9847a82088%40%3Ccommits.activemq.apache.org%3E"
},
{
"name": "[activemq-commits] 20210127 [activemq-website] branch master updated: Publish CVE-2021-26117",
"tags": [
"mailing-list",
"x_refsource_MLIST"
],
"url": "https://lists.apache.org/thread.html/rb2fd3bf2dce042e0ab3f3c94c4767c96bb2e7e6737624d63162df36d%40%3Ccommits.activemq.apache.org%3E"
}
]
}
},
"cveMetadata": {
"assignerOrgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
"assignerShortName": "redhat",
"cveId": "CVE-2017-12174",
"datePublished": "2018-03-07T22:00:00.000Z",
"dateReserved": "2017-08-01T00:00:00.000Z",
"dateUpdated": "2024-08-05T18:28:16.599Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
CVE-2017-9627 (GCVE-0-2017-9627)
Vulnerability from cvelistv5 – Published: 2017-07-07 17:00 – Updated: 2024-08-05 17:11| URL | Tags |
|---|---|
| http://www.securityfocus.com/bid/99488 | vdb-entryx_refsource_BID |
| https://ics-cert.us-cert.gov/advisories/ICSA-17-187-04 | x_refsource_MISC |
| http://software.schneider-electric.com/pdf/securi… | x_refsource_MISC |
| http://www.securitytracker.com/id/1038836 | vdb-entryx_refsource_SECTRACK |
| Vendor | Product | Version | |
|---|---|---|---|
| n/a | Schneider Electric Wonderware ArchestrA Logger |
Affected:
Schneider Electric Wonderware ArchestrA Logger
|
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-05T17:11:02.370Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"name": "99488",
"tags": [
"vdb-entry",
"x_refsource_BID",
"x_transferred"
],
"url": "http://www.securityfocus.com/bid/99488"
},
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "https://ics-cert.us-cert.gov/advisories/ICSA-17-187-04"
},
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "http://software.schneider-electric.com/pdf/security-bulletin/lfsec00000116/"
},
{
"name": "1038836",
"tags": [
"vdb-entry",
"x_refsource_SECTRACK",
"x_transferred"
],
"url": "http://www.securitytracker.com/id/1038836"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"product": "Schneider Electric Wonderware ArchestrA Logger",
"vendor": "n/a",
"versions": [
{
"status": "affected",
"version": "Schneider Electric Wonderware ArchestrA Logger"
}
]
}
],
"datePublic": "2017-07-07T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "An Uncontrolled Resource Consumption issue was discovered in Schneider Electric Wonderware ArchestrA Logger, versions 2017.426.2307.1 and prior. The uncontrolled resource consumption vulnerability could allow an attacker to exhaust the memory resources of the machine, causing a denial of service."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2017-07-11T09:57:01.000Z",
"orgId": "7d14cffa-0d7d-4270-9dc0-52cabd5a23a6",
"shortName": "icscert"
},
"references": [
{
"name": "99488",
"tags": [
"vdb-entry",
"x_refsource_BID"
],
"url": "http://www.securityfocus.com/bid/99488"
},
{
"tags": [
"x_refsource_MISC"
],
"url": "https://ics-cert.us-cert.gov/advisories/ICSA-17-187-04"
},
{
"tags": [
"x_refsource_MISC"
],
"url": "http://software.schneider-electric.com/pdf/security-bulletin/lfsec00000116/"
},
{
"name": "1038836",
"tags": [
"vdb-entry",
"x_refsource_SECTRACK"
],
"url": "http://www.securitytracker.com/id/1038836"
}
],
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "ics-cert@hq.dhs.gov",
"ID": "CVE-2017-9627",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "Schneider Electric Wonderware ArchestrA Logger",
"version": {
"version_data": [
{
"version_value": "Schneider Electric Wonderware ArchestrA Logger"
}
]
}
}
]
},
"vendor_name": "n/a"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "An Uncontrolled Resource Consumption issue was discovered in Schneider Electric Wonderware ArchestrA Logger, versions 2017.426.2307.1 and prior. The uncontrolled resource consumption vulnerability could allow an attacker to exhaust the memory resources of the machine, causing a denial of service."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-400"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "99488",
"refsource": "BID",
"url": "http://www.securityfocus.com/bid/99488"
},
{
"name": "https://ics-cert.us-cert.gov/advisories/ICSA-17-187-04",
"refsource": "MISC",
"url": "https://ics-cert.us-cert.gov/advisories/ICSA-17-187-04"
},
{
"name": "http://software.schneider-electric.com/pdf/security-bulletin/lfsec00000116/",
"refsource": "MISC",
"url": "http://software.schneider-electric.com/pdf/security-bulletin/lfsec00000116/"
},
{
"name": "1038836",
"refsource": "SECTRACK",
"url": "http://www.securitytracker.com/id/1038836"
}
]
}
}
}
},
"cveMetadata": {
"assignerOrgId": "7d14cffa-0d7d-4270-9dc0-52cabd5a23a6",
"assignerShortName": "icscert",
"cveId": "CVE-2017-9627",
"datePublished": "2017-07-07T17:00:00.000Z",
"dateReserved": "2017-06-14T00:00:00.000Z",
"dateUpdated": "2024-08-05T17:11:02.370Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
Mitigation
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended. A strong authentication and access control model will help prevent such attacks from occurring in the first place. The login application should be protected against DoS attacks as much as possible. Limiting the database access, perhaps by caching result sets, can help minimize the resources expended. To further limit the potential for a DoS attack, consider tracking the rate of requests received from users and blocking requests that exceed a defined rate threshold.
Mitigation
- Mitigation of resource exhaustion attacks requires that the target system either:
- recognizes the attack and denies that user further access for a given amount of time, or
- uniformly throttles all requests in order to make it more difficult to consume resources more quickly than they can again be freed.
- The first of these solutions is an issue in itself though, since it may allow attackers to prevent the use of the system by a particular valid user. If the attacker impersonates the valid user, they may be able to prevent the user from accessing the server in question.
- The second solution is simply difficult to effectively institute -- and even when properly done, it does not provide a full solution. It simply makes the attack require more resources on the part of the attacker.
Mitigation
Ensure that protocols have specific limits of scale placed on them.
Mitigation
Ensure that all failures in resource allocation place the system into a safe posture.
CAPEC-147: XML Ping of the Death
An attacker initiates a resource depletion attack where a large number of small XML messages are delivered at a sufficiently rapid rate to cause a denial of service or crash of the target. Transactions such as repetitive SOAP transactions can deplete resources faster than a simple flooding attack because of the additional resources used by the SOAP protocol and the resources necessary to process SOAP messages. The transactions used are immaterial as long as they cause resource utilization on the target. In other words, this is a normal flooding attack augmented by using messages that will require extra processing on the target.
CAPEC-227: Sustained Client Engagement
An adversary attempts to deny legitimate users access to a resource by continually engaging a specific resource in an attempt to keep the resource tied up as long as possible. The adversary's primary goal is not to crash or flood the target, which would alert defenders; rather it is to repeatedly perform actions or abuse algorithmic flaws such that a given resource is tied up and not available to a legitimate user. By carefully crafting a requests that keep the resource engaged through what is seemingly benign requests, legitimate users are limited or completely denied access to the resource.
CAPEC-492: Regular Expression Exponential Blowup
An adversary may execute an attack on a program that uses a poor Regular Expression(Regex) implementation by choosing input that results in an extreme situation for the Regex. A typical extreme situation operates at exponential time compared to the input size. This is due to most implementations using a Nondeterministic Finite Automaton(NFA) state machine to be built by the Regex algorithm since NFA allows backtracking and thus more complex regular expressions.