VAR-200412-0107
Vulnerability from variot - Updated: 2025-04-03 22:31Buffer overflow in Entrust LibKmp ISAKMP library, as used by Symantec Enterprise Firewall 7.0 through 8.0, Gateway Security 5300 1.0, Gateway Security 5400 2.0, and VelociRaptor 1.5, allows remote attackers to execute arbitrary code via a crafted ISAKMP payload. The Entrust LibKMP ISAKMP library is reported to be affected by a remote buffer overflow vulnerability. Malicious ISAKMP packets may trigger a buffer overrun in the affected library resulting in the corruption of process memory. Although unconfirmed, it is conjectured that this vulnerability may be related to the vulnerability described in BID 10273, as Checkpoint VPN-1 may use the affected library. The Entrust LibKmp ISAKMP library is used by multiple VPN vendors to exchange IKE keys for IPSEC-based VPN products. libKmp handles all incoming ISAKMP packets, this library is also used to authenticate and check the processing of incoming requests. The Entrust LibKmp ISAKMP library does not correctly verify incoming ISAKMP packets when implementing the IKE key exchange protocol. Entrust\'\'s LibKmp library is provided by the vendor to third parties to handle the exchange of IKE keys. This library is used in several enterprise firewall VPN products. Entrust\'\'s LibKmp library is fully checked for handling ISAKMP payloads and sizes. But the proposal payload embedded in the main SA payload is not properly filtered. The code that handles these loads has a flaw that can lead to memory corruption, a heap overflow. An attacker exploits this vulnerability to send malicious ISAKMP packets, which can cause the VPN component to crash, and carefully constructed and submitted data may execute arbitrary instructions on the system with process privileges. Product: Symantec Gateway Security 2.0 - Model 5400 Series
Copyright \xa9 2004 Symantec Corporation August, 2004
Hotfix: SG8000-20040715-00 - Entrust updates
This document contains the following information about the Symantec Gateway Security 2.0 - Model 5400 Series:
- Prerequisites
- Included modules
- Fix description
- Installation instructions
- Uninstallation instructions
Prerequisites:
HB8000-20031023-00 - December 2003 patch SG8000-20040405-00 - April 2004 patch
Included modules:
isakmpd libEntrust.so libkmp.so
Fix description:
Corrects problem with Denial of Service attack reported against isakmpd in CAN-2004-0369.
Installation instructions:
The April 2004 patch must be installed prior to installing this hotfix.
To install the patch
- Download the entrust-sgs20.tgz file to a location that is accessible from the Security Gateway Management Interface (SGMI).
- In the SGMI, on the Action menu, click HotFix.
- In the left pane of the Hotfix Management window, click Install hotfix.
- In the right pane of the Hotfix Management window, click Browse.
- In the Choose file dialog box, browse to and select the entrust-sgs20.tgz file, and then click Open.
- In the right pane of the Hotfix Management window, click Install.
- Wait until a message appears in the right pane of the Hotfix Management window. (Note: there is no visible indication of activity.)
- If the message includes a "Restart" link, click the link and wait until the "Security gateway is restarting" message appears.
- Close the Hotfix Management window.
Uninstallation instructions:
To uninstall the patch
- In the SGMI, on the Action menu, click HotFix.
- In the left pane of the Hotfix Management window, click Uninstall hotfix.
- In the right pane of the Hotfix Management window, click the radio button next to hotfix ID SG8000-20040715-00.
- In the right pane of the Hotfix Management window, click Uninstall.
- Wait until a message appears in the right pane of the Hotfix Management window. (Note: there is no visible indication of activity.)
- If the message includes a "Restart" link, click the link and wait until the "Security gateway is restarting" message appears.
- Close the Hotfix Management window.
. Connect to Symantec Gateway Security (SGS) using the SRMC. Connect to the VelociRaptor using the SRMC. Right-click the VelociRaptor icon. Browse to the location of the *.tgz file. Select Open to load the patch. Answer "No" when asked if you want to reboot the system. Connect to the VelociRaptor using the SRMC. Right-click the VelociRaptor. Select All Tasks > SRL Client. Log into the system. Type: cd /usr/vr/hotfixes/SG7004-20040715-00 and press Enter. Type: ./Uninstall and press Enter
Show details on source website{
"affected_products": {
"_id": null,
"data": [
{
"_id": null,
"model": "enterprise firewall",
"scope": "eq",
"trust": 2.4,
"vendor": "symantec",
"version": "7.0.4"
},
{
"_id": null,
"model": "enterprise firewall",
"scope": "eq",
"trust": 2.4,
"vendor": "symantec",
"version": "8.0"
},
{
"_id": null,
"model": "velociraptor",
"scope": "eq",
"trust": 1.9,
"vendor": "symantec",
"version": "1.5"
},
{
"_id": null,
"model": "enterprise firewall",
"scope": "eq",
"trust": 1.8,
"vendor": "symantec",
"version": "7.0"
},
{
"_id": null,
"model": "gateway security 5300",
"scope": "eq",
"trust": 1.6,
"vendor": "symantec",
"version": "1.0"
},
{
"_id": null,
"model": "gateway security 5400",
"scope": "eq",
"trust": 1.6,
"vendor": "symantec",
"version": "2.0"
},
{
"_id": null,
"model": "libkmp isakmp library",
"scope": "eq",
"trust": 1.0,
"vendor": "entrust",
"version": "*"
},
{
"_id": null,
"model": "gateway security",
"scope": "eq",
"trust": 0.3,
"vendor": "symantec",
"version": "5440"
},
{
"_id": null,
"model": "gateway security",
"scope": "eq",
"trust": 0.3,
"vendor": "symantec",
"version": "5300"
},
{
"_id": null,
"model": "gateway security",
"scope": "eq",
"trust": 0.3,
"vendor": "symantec",
"version": "52001.0"
},
{
"_id": null,
"model": "gateway security",
"scope": "eq",
"trust": 0.3,
"vendor": "symantec",
"version": "51101.0"
},
{
"_id": null,
"model": "gateway security 360r",
"scope": null,
"trust": 0.3,
"vendor": "symantec",
"version": null
},
{
"_id": null,
"model": "enterprise firewall solaris",
"scope": "eq",
"trust": 0.3,
"vendor": "symantec",
"version": "7.0.4"
},
{
"_id": null,
"model": "enterprise firewall nt/2000",
"scope": "eq",
"trust": 0.3,
"vendor": "symantec",
"version": "7.0.4"
},
{
"_id": null,
"model": "enterprise firewall solaris",
"scope": "eq",
"trust": 0.3,
"vendor": "symantec",
"version": "7.0"
},
{
"_id": null,
"model": "enterprise firewall nt/2000",
"scope": "eq",
"trust": 0.3,
"vendor": "symantec",
"version": "7.0"
},
{
"_id": null,
"model": "libkmp isakmp library",
"scope": null,
"trust": 0.3,
"vendor": "entrust",
"version": null
}
],
"sources": [
{
"db": "BID",
"id": "11039"
},
{
"db": "JVNDB",
"id": "JVNDB-2004-000340"
},
{
"db": "CNNVD",
"id": "CNNVD-200412-576"
},
{
"db": "NVD",
"id": "CVE-2004-0369"
}
]
},
"configurations": {
"_id": null,
"data": [
{
"CVE_data_version": "4.0",
"nodes": [
{
"cpe_match": [
{
"cpe22Uri": "cpe:/a:symantec:enterprise_firewall",
"vulnerable": true
}
],
"operator": "OR"
}
]
}
],
"sources": [
{
"db": "JVNDB",
"id": "JVNDB-2004-000340"
}
]
},
"credits": {
"_id": null,
"data": "Mark Dowd\nNeel Mehta",
"sources": [
{
"db": "CNNVD",
"id": "CNNVD-200412-576"
}
],
"trust": 0.6
},
"cve": "CVE-2004-0369",
"cvss": {
"_id": null,
"data": [
{
"cvssV2": [
{
"accessComplexity": "LOW",
"accessVector": "NETWORK",
"authentication": "NONE",
"author": "nvd@nist.gov",
"availabilityImpact": "PARTIAL",
"baseScore": 7.5,
"confidentialityImpact": "PARTIAL",
"exploitabilityScore": 10.0,
"id": "CVE-2004-0369",
"impactScore": 6.4,
"integrityImpact": "PARTIAL",
"severity": "HIGH",
"trust": 1.8,
"vectorString": "AV:N/AC:L/Au:N/C:P/I:P/A:P",
"version": "2.0"
},
{
"accessComplexity": "LOW",
"accessVector": "NETWORK",
"authentication": "NONE",
"author": "VULHUB",
"availabilityImpact": "PARTIAL",
"baseScore": 7.5,
"confidentialityImpact": "PARTIAL",
"exploitabilityScore": 10.0,
"id": "VHN-8799",
"impactScore": 6.4,
"integrityImpact": "PARTIAL",
"severity": "HIGH",
"trust": 0.1,
"vectorString": "AV:N/AC:L/AU:N/C:P/I:P/A:P",
"version": "2.0"
}
],
"cvssV3": [],
"severity": [
{
"author": "nvd@nist.gov",
"id": "CVE-2004-0369",
"trust": 1.0,
"value": "HIGH"
},
{
"author": "NVD",
"id": "CVE-2004-0369",
"trust": 0.8,
"value": "High"
},
{
"author": "CNNVD",
"id": "CNNVD-200412-576",
"trust": 0.6,
"value": "HIGH"
},
{
"author": "VULHUB",
"id": "VHN-8799",
"trust": 0.1,
"value": "HIGH"
}
]
}
],
"sources": [
{
"db": "VULHUB",
"id": "VHN-8799"
},
{
"db": "JVNDB",
"id": "JVNDB-2004-000340"
},
{
"db": "CNNVD",
"id": "CNNVD-200412-576"
},
{
"db": "NVD",
"id": "CVE-2004-0369"
}
]
},
"description": {
"_id": null,
"data": "Buffer overflow in Entrust LibKmp ISAKMP library, as used by Symantec Enterprise Firewall 7.0 through 8.0, Gateway Security 5300 1.0, Gateway Security 5400 2.0, and VelociRaptor 1.5, allows remote attackers to execute arbitrary code via a crafted ISAKMP payload. The Entrust LibKMP ISAKMP library is reported to be affected by a remote buffer overflow vulnerability. Malicious ISAKMP packets may trigger a buffer overrun in the affected library resulting in the corruption of process memory. \nAlthough unconfirmed, it is conjectured that this vulnerability may be related to the vulnerability described in BID 10273, as Checkpoint VPN-1 may use the affected library. The Entrust LibKmp ISAKMP library is used by multiple VPN vendors to exchange IKE keys for IPSEC-based VPN products. libKmp handles all incoming ISAKMP packets, this library is also used to authenticate and check the processing of incoming requests. The Entrust LibKmp ISAKMP library does not correctly verify incoming ISAKMP packets when implementing the IKE key exchange protocol. Entrust\\\u0027\\\u0027s LibKmp library is provided by the vendor to third parties to handle the exchange of IKE keys. This library is used in several enterprise firewall VPN products. Entrust\\\u0027\\\u0027s LibKmp library is fully checked for handling ISAKMP payloads and sizes. But the proposal payload embedded in the main SA payload is not properly filtered. The code that handles these loads has a flaw that can lead to memory corruption, a heap overflow. An attacker exploits this vulnerability to send malicious ISAKMP packets, which can cause the VPN component to crash, and carefully constructed and submitted data may execute arbitrary instructions on the system with process privileges. \nProduct: Symantec Gateway Security 2.0 - Model 5400 Series\t\n\nCopyright \\xa9 2004 Symantec Corporation August, 2004\n************************************************************************************\nHotfix: SG8000-20040715-00 - Entrust updates\n\n************************************************************************************\nThis document contains the following information about the Symantec Gateway Security\n2.0 - Model 5400 Series:\n\n* Prerequisites\n* Included modules\n* Fix description\n* Installation instructions\n* Uninstallation instructions\n\n************************************************************************************\nPrerequisites:\n\nHB8000-20031023-00 - December 2003 patch\nSG8000-20040405-00 - April 2004 patch\n\n************************************************************************************\nIncluded modules:\n\nisakmpd\nlibEntrust.so\nlibkmp.so\n \n************************************************************************************\nFix description:\n\nCorrects problem with Denial of Service attack reported against isakmpd in \nCAN-2004-0369. \n\n************************************************************************************\nInstallation instructions:\n\nThe April 2004 patch must be installed prior to installing this hotfix. \n\nTo install the patch\n\n1. Download the entrust-sgs20.tgz file to a location that is accessible from \n the Security Gateway Management Interface (SGMI). \n2. In the SGMI, on the Action menu, click HotFix. \n3. In the left pane of the Hotfix Management window, click Install hotfix. \n4. In the right pane of the Hotfix Management window, click Browse. \n5. In the Choose file dialog box, browse to and select the entrust-sgs20.tgz file,\n and then click Open. \n6. In the right pane of the Hotfix Management window, click Install. \n7. Wait until a message appears in the right pane of the Hotfix Management window. \n (Note: there is no visible indication of activity.)\n8. If the message includes a \"Restart\" link, click the link and wait until the\n \"Security gateway is restarting\" message appears. \n9. Close the Hotfix Management window. \n\n\n************************************************************************************\nUninstallation instructions:\n\nTo uninstall the patch\n\n1. In the SGMI, on the Action menu, click HotFix. \n2. In the left pane of the Hotfix Management window, click Uninstall hotfix. \n3. In the right pane of the Hotfix Management window, click the radio button next\n to hotfix ID SG8000-20040715-00. \n4. In the right pane of the Hotfix Management window, click Uninstall. \n5. Wait until a message appears in the right pane of the Hotfix Management window. \n (Note: there is no visible indication of activity.)\n6. If the message includes a \"Restart\" link, click the link and wait until the\n \"Security gateway is restarting\" message appears. \n7. Close the Hotfix Management window. \n\n\n************************************************************************************\n\n. Connect to Symantec Gateway Security (SGS) using the SRMC. Connect to the VelociRaptor using the SRMC. Right-click the VelociRaptor icon. Browse to the location of the *.tgz file. Select Open to load the patch. Answer \"No\" when asked if you want to reboot the system. Connect to the VelociRaptor using the SRMC. Right-click the VelociRaptor. Select All Tasks \u003e SRL Client. Log into the system. Type: cd /usr/vr/hotfixes/SG7004-20040715-00 and press Enter. Type: ./Uninstall and press Enter",
"sources": [
{
"db": "NVD",
"id": "CVE-2004-0369"
},
{
"db": "JVNDB",
"id": "JVNDB-2004-000340"
},
{
"db": "BID",
"id": "11039"
},
{
"db": "VULHUB",
"id": "VHN-8799"
},
{
"db": "PACKETSTORM",
"id": "34156"
},
{
"db": "PACKETSTORM",
"id": "34155"
},
{
"db": "PACKETSTORM",
"id": "34154"
}
],
"trust": 2.25
},
"external_ids": {
"_id": null,
"data": [
{
"db": "NVD",
"id": "CVE-2004-0369",
"trust": 3.1
},
{
"db": "BID",
"id": "11039",
"trust": 2.8
},
{
"db": "AUSCERT",
"id": "ESB-2004.0538",
"trust": 1.7
},
{
"db": "SECUNIA",
"id": "12371",
"trust": 0.8
},
{
"db": "JVNDB",
"id": "JVNDB-2004-000340",
"trust": 0.8
},
{
"db": "CNNVD",
"id": "CNNVD-200412-576",
"trust": 0.7
},
{
"db": "ISS",
"id": "20040826 ENTRUST LIBKMP LIBRARY BUFFER OVERFLOW",
"trust": 0.6
},
{
"db": "CIAC",
"id": "O-206",
"trust": 0.6
},
{
"db": "XF",
"id": "15669",
"trust": 0.6
},
{
"db": "NSFOCUS",
"id": "6852",
"trust": 0.6
},
{
"db": "PACKETSTORM",
"id": "34156",
"trust": 0.2
},
{
"db": "PACKETSTORM",
"id": "34155",
"trust": 0.2
},
{
"db": "PACKETSTORM",
"id": "34154",
"trust": 0.2
},
{
"db": "VULHUB",
"id": "VHN-8799",
"trust": 0.1
}
],
"sources": [
{
"db": "VULHUB",
"id": "VHN-8799"
},
{
"db": "BID",
"id": "11039"
},
{
"db": "JVNDB",
"id": "JVNDB-2004-000340"
},
{
"db": "PACKETSTORM",
"id": "34156"
},
{
"db": "PACKETSTORM",
"id": "34155"
},
{
"db": "PACKETSTORM",
"id": "34154"
},
{
"db": "CNNVD",
"id": "CNNVD-200412-576"
},
{
"db": "NVD",
"id": "CVE-2004-0369"
}
]
},
"id": "VAR-200412-0107",
"iot": {
"_id": null,
"data": true,
"sources": [
{
"db": "VULHUB",
"id": "VHN-8799"
}
],
"trust": 0.01
},
"last_update_date": "2025-04-03T22:31:39.482000Z",
"patch": {
"_id": null,
"data": [
{
"title": "SYM04-012",
"trust": 0.8,
"url": "http://securityresponse.symantec.com/avcenter/security/Content/2004.08.26.html"
},
{
"title": "SYM04-012",
"trust": 0.8,
"url": "http://www.symantec.com/region/jp/sarcj/security/content/2004.08.26.html"
}
],
"sources": [
{
"db": "JVNDB",
"id": "JVNDB-2004-000340"
}
]
},
"problemtype_data": {
"_id": null,
"data": [
{
"problemtype": "NVD-CWE-Other",
"trust": 1.0
}
],
"sources": [
{
"db": "NVD",
"id": "CVE-2004-0369"
}
]
},
"references": {
"_id": null,
"data": [
{
"trust": 2.8,
"url": "http://xforce.iss.net/xforce/alerts/id/181"
},
{
"trust": 2.5,
"url": "http://www.securityfocus.com/bid/11039"
},
{
"trust": 2.0,
"url": "http://securityresponse.symantec.com/avcenter/security/content/2004.08.26.html"
},
{
"trust": 1.7,
"url": "http://www.auscert.org.au/render.html?it=4339"
},
{
"trust": 1.7,
"url": "http://www.ciac.org/ciac/bulletins/o-206.shtml"
},
{
"trust": 1.1,
"url": "https://exchange.xforce.ibmcloud.com/vulnerabilities/15669"
},
{
"trust": 0.8,
"url": "http://cve.mitre.org/cgi-bin/cvename.cgi?name=cve-2004-0369"
},
{
"trust": 0.8,
"url": "http://nvd.nist.gov/nvd.cfm?cvename=cve-2004-0369"
},
{
"trust": 0.8,
"url": "http://secunia.com/advisories/12371/"
},
{
"trust": 0.6,
"url": "http://xforce.iss.net/xforce/xfdb/15669"
},
{
"trust": 0.6,
"url": "http://www.nsfocus.net/vulndb/6852"
},
{
"trust": 0.3,
"url": "https://www.entrust.com/trustedcare/troubleshooting/bulletins.htm"
},
{
"trust": 0.3,
"url": "http://enterprisesecurity.symantec.com/products/products.cfm?productid=342\u0026eid=0"
},
{
"trust": 0.3,
"url": "ftp://ftp.symantec.com/public/updates/entrust-70w-readme.txt"
},
{
"trust": 0.3,
"url": "ftp://ftp.symantec.com/public/updates/entrust-70s-readme.txt"
},
{
"trust": 0.3,
"url": "ftp://ftp.symantec.com/public/updates/entrust-704s-readme.txt"
},
{
"trust": 0.3,
"url": "ftp://ftp.symantec.com/public/updates/entrust-704w-readme.txt"
},
{
"trust": 0.3,
"url": "http://enterprisesecurity.symantec.com/products/products.cfm?productid=47"
},
{
"trust": 0.3,
"url": "ftp://ftp.symantec.com/public/updates/entrust-sgs10-readme.txt"
},
{
"trust": 0.3,
"url": "ftp://ftp.symantec.com/public/updates/entrust-sgs20-readme.txt"
},
{
"trust": 0.3,
"url": "https://nvd.nist.gov/vuln/detail/cve-2004-0369"
}
],
"sources": [
{
"db": "VULHUB",
"id": "VHN-8799"
},
{
"db": "BID",
"id": "11039"
},
{
"db": "JVNDB",
"id": "JVNDB-2004-000340"
},
{
"db": "PACKETSTORM",
"id": "34156"
},
{
"db": "PACKETSTORM",
"id": "34155"
},
{
"db": "PACKETSTORM",
"id": "34154"
},
{
"db": "CNNVD",
"id": "CNNVD-200412-576"
},
{
"db": "NVD",
"id": "CVE-2004-0369"
}
]
},
"sources": {
"_id": null,
"data": [
{
"db": "VULHUB",
"id": "VHN-8799",
"ident": null
},
{
"db": "BID",
"id": "11039",
"ident": null
},
{
"db": "JVNDB",
"id": "JVNDB-2004-000340",
"ident": null
},
{
"db": "PACKETSTORM",
"id": "34156",
"ident": null
},
{
"db": "PACKETSTORM",
"id": "34155",
"ident": null
},
{
"db": "PACKETSTORM",
"id": "34154",
"ident": null
},
{
"db": "CNNVD",
"id": "CNNVD-200412-576",
"ident": null
},
{
"db": "NVD",
"id": "CVE-2004-0369",
"ident": null
}
]
},
"sources_release_date": {
"_id": null,
"data": [
{
"date": "2004-12-31T00:00:00",
"db": "VULHUB",
"id": "VHN-8799",
"ident": null
},
{
"date": "2004-08-25T00:00:00",
"db": "BID",
"id": "11039",
"ident": null
},
{
"date": "2007-04-01T00:00:00",
"db": "JVNDB",
"id": "JVNDB-2004-000340",
"ident": null
},
{
"date": "2004-08-26T20:10:18",
"db": "PACKETSTORM",
"id": "34156",
"ident": null
},
{
"date": "2004-08-26T20:09:14",
"db": "PACKETSTORM",
"id": "34155",
"ident": null
},
{
"date": "2004-08-26T20:07:58",
"db": "PACKETSTORM",
"id": "34154",
"ident": null
},
{
"date": "2004-08-26T00:00:00",
"db": "CNNVD",
"id": "CNNVD-200412-576",
"ident": null
},
{
"date": "2004-12-31T05:00:00",
"db": "NVD",
"id": "CVE-2004-0369",
"ident": null
}
]
},
"sources_update_date": {
"_id": null,
"data": [
{
"date": "2017-07-11T00:00:00",
"db": "VULHUB",
"id": "VHN-8799",
"ident": null
},
{
"date": "2009-07-12T06:17:00",
"db": "BID",
"id": "11039",
"ident": null
},
{
"date": "2007-04-01T00:00:00",
"db": "JVNDB",
"id": "JVNDB-2004-000340",
"ident": null
},
{
"date": "2005-10-20T00:00:00",
"db": "CNNVD",
"id": "CNNVD-200412-576",
"ident": null
},
{
"date": "2025-04-03T01:03:51.193000",
"db": "NVD",
"id": "CVE-2004-0369",
"ident": null
}
]
},
"threat_type": {
"_id": null,
"data": "remote",
"sources": [
{
"db": "CNNVD",
"id": "CNNVD-200412-576"
}
],
"trust": 0.6
},
"title": {
"_id": null,
"data": "Entrust LibKMP ISAKMP Library Remote IPsec/ISAKMP Buffer Overflow Vulnerability",
"sources": [
{
"db": "BID",
"id": "11039"
},
{
"db": "CNNVD",
"id": "CNNVD-200412-576"
}
],
"trust": 0.9
},
"type": {
"_id": null,
"data": "Boundary Condition Error",
"sources": [
{
"db": "BID",
"id": "11039"
},
{
"db": "CNNVD",
"id": "CNNVD-200412-576"
}
],
"trust": 0.9
}
}
Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline
Sightings and recorded dates, grouped by day · UTC
How durations are calculated
Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.
Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.
Loading timeline…
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.