OESA-2024-1796 (CVE-2024-35821)
Vulnerability from osv_openeuler – Published: 2024-07-05 11:07 – Updated: 2026-08-06 11:07 – Source websiteThe Linux Kernel, the operating system core itself.
Security Fix(es):
In the Linux kernel, the following vulnerability has been resolved:
ubifs: Set page uptodate in the correct place
Page cache reads are lockless, so setting the freshly allocated page uptodate before we've overwritten it with the data it's supposed to have in it will allow a simultaneous reader to see old data. Move the call to SetPageUptodate into ubifs_write_end(), which is after we copied the new data into the page.(CVE-2024-35821)
In the Linux kernel, the following vulnerability has been resolved:
kprobes: Fix possible use-after-free issue on kprobe registration
When unloading a module, its state is changing MODULE_STATE_LIVE ->
MODULE_STATE_GOING -> MODULE_STATE_UNFORMED. Each change will take
a time. is_module_text_address() and __module_text_address()
works with MODULE_STATE_LIVE and MODULE_STATE_GOING.
If we use is_module_text_address() and __module_text_address()
separately, there is a chance that the first one is succeeded but the
next one is failed because module->state becomes MODULE_STATE_UNFORMED
between those operations.
In check_kprobe_address_safe(), if the second __module_text_address()
is failed, that is ignored because it expected a kernel_text address.
But it may have failed simply because module->state has been changed
to MODULE_STATE_UNFORMED. In this case, arm_kprobe() will try to modify
non-exist module text address (use-after-free).
To fix this problem, we should not use separated is_module_text_address()
and __module_text_address(), but use only __module_text_address()
once and do try_module_get(module) which is only available with
MODULE_STATE_LIVE.(CVE-2024-35955)
In the Linux kernel, the following vulnerability has been resolved:
net/sched: taprio: always validate TCA_TAPRIO_ATTR_PRIOMAP
If one TCA_TAPRIO_ATTR_PRIOMAP attribute has been provided, taprio_parse_mqprio_opt() must validate it, or userspace can inject arbitrary data to the kernel, the second time taprio_change() is called.
First call (with valid attributes) sets dev->num_tc to a non zero value.
Second call (with arbitrary mqprio attributes) returns early from taprio_parse_mqprio_opt() and bad things can happen.(CVE-2024-36974)
In the Linux kernel, the following vulnerability has been resolved:
tcp: Fix shift-out-of-bounds in dctcp_update_alpha().
In dctcp_update_alpha(), we use a module parameter dctcp_shift_g as follows:
alpha -= min_not_zero(alpha, alpha >> dctcp_shift_g); ... delivered_ce <<= (10 - dctcp_shift_g);
It seems syzkaller started fuzzing module parameters and triggered shift-out-of-bounds [0] by setting 100 to dctcp_shift_g:
memcpy((void)0x20000080, "/sys/module/tcp_dctcp/parameters/dctcp_shift_g\000", 47); res = syscall(__NR_openat, /fd=/0xffffffffffffff9cul, /file=/0x20000080ul, /flags=/2ul, /mode=/0ul); memcpy((void)0x20000000, "100\000", 4); syscall(__NR_write, /fd=/r[0], /val=/0x20000000ul, /len=/4ul);
Let's limit the max value of dctcp_shift_g by param_set_uint_minmax().
With this patch:
# echo 10 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g # cat /sys/module/tcp_dctcp/parameters/dctcp_shift_g 10 # echo 11 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g -bash: echo: write error: Invalid argument
[0]: UBSAN: shift-out-of-bounds in net/ipv4/tcp_dctcp.c:143:12 shift exponent 100 is too large for 32-bit type 'u32' (aka 'unsigned int') CPU: 0 PID: 8083 Comm: syz-executor345 Not tainted 6.9.0-05151-g1b294a1f3561 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x201/0x300 lib/dump_stack.c:114 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_shift_out_of_bounds+0x346/0x3a0 lib/ubsan.c:468 dctcp_update_alpha+0x540/0x570 net/ipv4/tcp_dctcp.c:143 tcp_in_ack_event net/ipv4/tcp_input.c:3802 [inline] tcp_ack+0x17b1/0x3bc0 net/ipv4/tcp_input.c:3948 tcp_rcv_state_process+0x57a/0x2290 net/ipv4/tcp_input.c:6711 tcp_v4_do_rcv+0x764/0xc40 net/ipv4/tcp_ipv4.c:1937 sk_backlog_rcv include/net/sock.h:1106 [inline] __release_sock+0x20f/0x350 net/core/sock.c:2983 release_sock+0x61/0x1f0 net/core/sock.c:3549 mptcp_subflow_shutdown+0x3d0/0x620 net/mptcp/protocol.c:2907 mptcp_check_send_data_fin+0x225/0x410 net/mptcp/protocol.c:2976 __mptcp_close+0x238/0xad0 net/mptcp/protocol.c:3072 mptcp_close+0x2a/0x1a0 net/mptcp/protocol.c:3127 inet_release+0x190/0x1f0 net/ipv4/af_inet.c:437 __sock_release net/socket.c:659 [inline] sock_close+0xc0/0x240 net/socket.c:1421 __fput+0x41b/0x890 fs/file_table.c:422 task_work_run+0x23b/0x300 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x9c8/0x2540 kernel/exit.c:878 do_group_exit+0x201/0x2b0 kernel/exit.c:1027 __do_sys_exit_group kernel/exit.c:1038 [inline] __se_sys_exit_group kernel/exit.c:1036 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1036 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xe4/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x67/0x6f RIP: 0033:0x7f6c2b5005b6 Code: Unable to access opcode bytes at 0x7f6c2b50058c. RSP: 002b:00007ffe883eb948 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00007f6c2b5862f0 RCX: 00007f6c2b5005b6 RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001 RBP: 0000000000000001 R08: 00000000000000e7 R09: ffffffffffffffc0 R10: 0000000000000006 R11: 0000000000000246 R12: 00007f6c2b5862f0 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 </TASK>(CVE-2024-37356)
In the Linux kernel, the following vulnerability has been resolved:
of: module: add buffer overflow check in of_modalias()
In of_modalias(), if the buffer happens to be too small even for the 1st snprintf() call, the len parameter will become negative and str parameter (if not NULL initially) will point beyond the buffer's end. Add the buffer overflow check after the 1st snprintf() call and fix such check after the strlen() call (accounting for the terminating NUL char).(CVE-2024-38541)
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Add a timeout to acquire the command queue semaphore
Prevent forced completion handling on an entry that has not yet been assigned an index, causing an out of bounds access on idx = -22. Instead of waiting indefinitely for the sem, blocking flow now waits for index to be allocated or a sem acquisition timeout before beginning the timer for FW completion.
Kernel log example: mlx5_core 0000:06:00.0: wait_func_handle_exec_timeout:1128:(pid 185911): cmd[-22]: CREATE_UCTX(0xa04) No done completion(CVE-2024-38556)
In the Linux kernel, the following vulnerability has been resolved:
bpf: Add BPF_PROG_TYPE_CGROUP_SKB attach type enforcement in BPF_LINK_CREATE
bpf_prog_attach uses attach_type_to_prog_type to enforce proper attach type for BPF_PROG_TYPE_CGROUP_SKB. link_create uses bpf_prog_get and relies on bpf_prog_attach_check_attach_type to properly verify prog_type <> attach_type association.
Add missing attach_type enforcement for the link_create case. Otherwise, it's currently possible to attach cgroup_skb prog types to other cgroup hooks.(CVE-2024-38564)
In the Linux kernel, the following vulnerability has been resolved:
ftrace: Fix possible use-after-free issue in ftrace_location()
KASAN reports a bug:
BUG: KASAN: use-after-free in ftrace_location+0x90/0x120 Read of size 8 at addr ffff888141d40010 by task insmod/424 CPU: 8 PID: 424 Comm: insmod Tainted: G W 6.9.0-rc2+ [...] Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 print_report+0xcf/0x610 kasan_report+0xb5/0xe0 ftrace_location+0x90/0x120 register_kprobe+0x14b/0xa40 kprobe_init+0x2d/0xff0 [kprobe_example] do_one_initcall+0x8f/0x2d0 do_init_module+0x13a/0x3c0 load_module+0x3082/0x33d0 init_module_from_file+0xd2/0x130 __x64_sys_finit_module+0x306/0x440 do_syscall_64+0x68/0x140 entry_SYSCALL_64_after_hwframe+0x71/0x79
The root cause is that, in lookup_rec(), ftrace record of some address is being searched in ftrace pages of some module, but those ftrace pages at the same time is being freed in ftrace_release_mod() as the corresponding module is being deleted:
CPU1 | CPU2
register_kprobes() { | delete_module() { check_kprobe_address_safe() { | arch_check_ftrace_location() { | ftrace_location() { | lookup_rec() // USE! | ftrace_release_mod() // Free!
To fix this issue: 1. Hold rcu lock as accessing ftrace pages in ftrace_location_range(); 2. Use ftrace_location_range() instead of lookup_rec() in ftrace_location(); 3. Call synchronize_rcu() before freeing any ftrace pages both in ftrace_process_locs()/ftrace_release_mod()/ftrace_free_mem().(CVE-2024-38588)
In the Linux kernel, the following vulnerability has been resolved:
jffs2: prevent xattr node from overflowing the eraseblock
Add a check to make sure that the requested xattr node size is no larger than the eraseblock minus the cleanmarker.
Unlike the usual inode nodes, the xattr nodes aren't split into parts and spread across multiple eraseblocks, which means that a xattr node must not occupy more than one eraseblock. If the requested xattr value is too large, the xattr node can spill onto the next eraseblock, overwriting the nodes and causing errors such as:
jffs2: argh. node added in wrong place at 0x0000b050(2) jffs2: nextblock 0x0000a000, expected at 0000b00c jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050, read=0xfc892c93, calc=0x000000 jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed at 0x01e00c. {848f,2fc4,0fef511f,59a3d171} jffs2: Node at 0x0000000c with length 0x00001044 would run over the end of the erase block jffs2: Perhaps the file system was created with the wrong erase size? jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000010: 0x1044 instead
This breaks the filesystem and can lead to KASAN crashes such as:
BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0 Read of size 4 at addr ffff88802c31e914 by task repro/830 CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xc4/0x620 ? __virt_addr_valid+0x308/0x5b0 kasan_report+0xc1/0xf0 ? jffs2_sum_add_kvec+0x125e/0x15d0 ? jffs2_sum_add_kvec+0x125e/0x15d0 jffs2_sum_add_kvec+0x125e/0x15d0 jffs2_flash_direct_writev+0xa8/0xd0 jffs2_flash_writev+0x9c9/0xef0 ? __x64_sys_setxattr+0xc4/0x160 ? do_syscall_64+0x69/0x140 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [...]
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.(CVE-2024-38599)
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Use variable length array instead of fixed size
Should fix smatch warning: ntfs_set_label() error: __builtin_memcpy() 'uni->name' too small (20 vs 256)(CVE-2024-38623)
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Use 64 bit variable to avoid 32 bit overflow
For example, in the expression: vbo = 2 * vbo + skip(CVE-2024-38624)
In the Linux kernel, the following vulnerability has been resolved:
watchdog: cpu5wdt.c: Fix use-after-free bug caused by cpu5wdt_trigger
When the cpu5wdt module is removing, the origin code uses del_timer() to de-activate the timer. If the timer handler is running, del_timer() could not stop it and will return directly. If the port region is released by release_region() and then the timer handler cpu5wdt_trigger() calls outb() to write into the region that is released, the use-after-free bug will happen.
Change del_timer() to timer_shutdown_sync() in order that the timer handler could be finished before the port region is released.(CVE-2024-38630)
In the Linux kernel, the following vulnerability has been resolved:
s390/ap: Fix crash in AP internal function modify_bitmap()
A system crash like this
Failing address: 200000cb7df6f000 TEID: 200000cb7df6f403 Fault in home space mode while using kernel ASCE. AS:00000002d71bc007 R3:00000003fe5b8007 S:000000011a446000 P:000000015660c13d Oops: 0038 ilc:3 [#1] PREEMPT SMP Modules linked in: mlx5_ib ... CPU: 8 PID: 7556 Comm: bash Not tainted 6.9.0-rc7 #8 Hardware name: IBM 3931 A01 704 (LPAR) Krnl PSW : 0704e00180000000 0000014b75e7b606 (ap_parse_bitmap_str+0x10e/0x1f8) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000001 ffffffffffffffc0 0000000000000001 00000048f96b75d3 000000cb00000100 ffffffffffffffff ffffffffffffffff 000000cb7df6fce0 000000cb7df6fce0 00000000ffffffff 000000000000002b 00000048ffffffff 000003ff9b2dbc80 200000cb7df6fcd8 0000014bffffffc0 000000cb7df6fbc8 Krnl Code: 0000014b75e7b5fc: a7840047 brc 8,0000014b75e7b68a 0000014b75e7b600: 18b2 lr %r11,%r2 #0000014b75e7b602: a7f4000a brc 15,0000014b75e7b616 >0000014b75e7b606: eb22d00000e6 laog %r2,%r2,0(%r13) 0000014b75e7b60c: a7680001 lhi %r6,1 0000014b75e7b610: 187b lr %r7,%r11 0000014b75e7b612: 84960021 brxh %r9,%r6,0000014b75e7b654 0000014b75e7b616: 18e9 lr %r14,%r9 Call Trace: [<0000014b75e7b606>] ap_parse_bitmap_str+0x10e/0x1f8 ([<0000014b75e7b5dc>] ap_parse_bitmap_str+0xe4/0x1f8) [<0000014b75e7b758>] apmask_store+0x68/0x140 [<0000014b75679196>] kernfs_fop_write_iter+0x14e/0x1e8 [<0000014b75598524>] vfs_write+0x1b4/0x448 [<0000014b7559894c>] ksys_write+0x74/0x100 [<0000014b7618a440>] __do_syscall+0x268/0x328 [<0000014b761a3558>] system_call+0x70/0x98 INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000014b75e7b636>] ap_parse_bitmap_str+0x13e/0x1f8 Kernel panic - not syncing: Fatal exception: panic_on_oops
occured when /sys/bus/ap/a[pq]mask was updated with a relative mask value (like +0x10-0x12,+60,-90) with one of the numeric values exceeding INT_MAX.
The fix is simple: use unsigned long values for the internal variables. The correct checks are already in place in the function but a simple int for the internal variables was used with the possibility to overflow.(CVE-2024-38661)
In the Linux kernel, the following vulnerability has been resolved:
um: Add winch to winch_handlers before registering winch IRQ
Registering a winch IRQ is racy, an interrupt may occur before the winch is added to the winch_handlers list.
If that happens, register_winch_irq() adds to that list a winch that is scheduled to be (or has already been) freed, causing a panic later in winch_cleanup().
Avoid the race by adding the winch to the winch_handlers list before registering the IRQ, and rolling back if um_request_irq() fails.(CVE-2024-39292)
{
"affected": [
{
"ecosystem_specific": {
"aarch64": [
"kernel-5.10.0-136.83.0.164.oe2203sp1.aarch64.rpm",
"kernel-debuginfo-5.10.0-136.83.0.164.oe2203sp1.aarch64.rpm",
"kernel-debugsource-5.10.0-136.83.0.164.oe2203sp1.aarch64.rpm",
"kernel-devel-5.10.0-136.83.0.164.oe2203sp1.aarch64.rpm",
"kernel-headers-5.10.0-136.83.0.164.oe2203sp1.aarch64.rpm",
"kernel-source-5.10.0-136.83.0.164.oe2203sp1.aarch64.rpm",
"kernel-tools-5.10.0-136.83.0.164.oe2203sp1.aarch64.rpm",
"kernel-tools-debuginfo-5.10.0-136.83.0.164.oe2203sp1.aarch64.rpm",
"kernel-tools-devel-5.10.0-136.83.0.164.oe2203sp1.aarch64.rpm",
"perf-5.10.0-136.83.0.164.oe2203sp1.aarch64.rpm",
"perf-debuginfo-5.10.0-136.83.0.164.oe2203sp1.aarch64.rpm",
"python3-perf-5.10.0-136.83.0.164.oe2203sp1.aarch64.rpm",
"python3-perf-debuginfo-5.10.0-136.83.0.164.oe2203sp1.aarch64.rpm"
],
"src": [
"kernel-5.10.0-136.83.0.164.oe2203sp1.src.rpm"
],
"x86_64": [
"kernel-5.10.0-136.83.0.164.oe2203sp1.x86_64.rpm",
"kernel-debuginfo-5.10.0-136.83.0.164.oe2203sp1.x86_64.rpm",
"kernel-debugsource-5.10.0-136.83.0.164.oe2203sp1.x86_64.rpm",
"kernel-devel-5.10.0-136.83.0.164.oe2203sp1.x86_64.rpm",
"kernel-headers-5.10.0-136.83.0.164.oe2203sp1.x86_64.rpm",
"kernel-source-5.10.0-136.83.0.164.oe2203sp1.x86_64.rpm",
"kernel-tools-5.10.0-136.83.0.164.oe2203sp1.x86_64.rpm",
"kernel-tools-debuginfo-5.10.0-136.83.0.164.oe2203sp1.x86_64.rpm",
"kernel-tools-devel-5.10.0-136.83.0.164.oe2203sp1.x86_64.rpm",
"perf-5.10.0-136.83.0.164.oe2203sp1.x86_64.rpm",
"perf-debuginfo-5.10.0-136.83.0.164.oe2203sp1.x86_64.rpm",
"python3-perf-5.10.0-136.83.0.164.oe2203sp1.x86_64.rpm",
"python3-perf-debuginfo-5.10.0-136.83.0.164.oe2203sp1.x86_64.rpm"
]
},
"package": {
"ecosystem": "openEuler:22.03-LTS-SP1",
"name": "kernel",
"purl": "pkg:rpm/openEuler/kernel\u0026distro=openEuler-22.03-LTS-SP1"
},
"ranges": [
{
"events": [
{
"introduced": "0"
},
{
"fixed": "5.10.0-136.83.0.164.oe2203sp1"
}
],
"type": "ECOSYSTEM"
}
]
}
],
"database_specific": {
"severity": "High"
},
"details": "The Linux Kernel, the operating system core itself.\r\n\r\nSecurity Fix(es):\r\n\r\nIn the Linux kernel, the following vulnerability has been resolved:\r\n\r\nubifs: Set page uptodate in the correct place\r\n\r\nPage cache reads are lockless, so setting the freshly allocated page\nuptodate before we\u0026apos;ve overwritten it with the data it\u0026apos;s supposed to have\nin it will allow a simultaneous reader to see old data. Move the call\nto SetPageUptodate into ubifs_write_end(), which is after we copied the\nnew data into the page.(CVE-2024-35821)\r\n\r\nIn the Linux kernel, the following vulnerability has been resolved:\r\n\r\nkprobes: Fix possible use-after-free issue on kprobe registration\r\n\r\nWhen unloading a module, its state is changing MODULE_STATE_LIVE -\u0026gt;\n MODULE_STATE_GOING -\u0026gt; MODULE_STATE_UNFORMED. Each change will take\na time. `is_module_text_address()` and `__module_text_address()`\nworks with MODULE_STATE_LIVE and MODULE_STATE_GOING.\nIf we use `is_module_text_address()` and `__module_text_address()`\nseparately, there is a chance that the first one is succeeded but the\nnext one is failed because module-\u0026gt;state becomes MODULE_STATE_UNFORMED\nbetween those operations.\r\n\r\nIn `check_kprobe_address_safe()`, if the second `__module_text_address()`\nis failed, that is ignored because it expected a kernel_text address.\nBut it may have failed simply because module-\u0026gt;state has been changed\nto MODULE_STATE_UNFORMED. In this case, arm_kprobe() will try to modify\nnon-exist module text address (use-after-free).\r\n\r\nTo fix this problem, we should not use separated `is_module_text_address()`\nand `__module_text_address()`, but use only `__module_text_address()`\nonce and do `try_module_get(module)` which is only available with\nMODULE_STATE_LIVE.(CVE-2024-35955)\r\n\r\nIn the Linux kernel, the following vulnerability has been resolved:\r\n\r\nnet/sched: taprio: always validate TCA_TAPRIO_ATTR_PRIOMAP\r\n\r\nIf one TCA_TAPRIO_ATTR_PRIOMAP attribute has been provided,\ntaprio_parse_mqprio_opt() must validate it, or userspace\ncan inject arbitrary data to the kernel, the second time\ntaprio_change() is called.\r\n\r\nFirst call (with valid attributes) sets dev-\u0026gt;num_tc\nto a non zero value.\r\n\r\nSecond call (with arbitrary mqprio attributes)\nreturns early from taprio_parse_mqprio_opt()\nand bad things can happen.(CVE-2024-36974)\r\n\r\nIn the Linux kernel, the following vulnerability has been resolved:\r\n\r\ntcp: Fix shift-out-of-bounds in dctcp_update_alpha().\r\n\r\nIn dctcp_update_alpha(), we use a module parameter dctcp_shift_g\nas follows:\r\n\r\n alpha -= min_not_zero(alpha, alpha \u0026gt;\u0026gt; dctcp_shift_g);\n ...\n delivered_ce \u0026lt;\u0026lt;= (10 - dctcp_shift_g);\r\n\r\nIt seems syzkaller started fuzzing module parameters and triggered\nshift-out-of-bounds [0] by setting 100 to dctcp_shift_g:\r\n\r\n memcpy((void*)0x20000080,\n \u0026quot;/sys/module/tcp_dctcp/parameters/dctcp_shift_g\\000\u0026quot;, 47);\n res = syscall(__NR_openat, /*fd=*/0xffffffffffffff9cul, /*file=*/0x20000080ul,\n /*flags=*/2ul, /*mode=*/0ul);\n memcpy((void*)0x20000000, \u0026quot;100\\000\u0026quot;, 4);\n syscall(__NR_write, /*fd=*/r[0], /*val=*/0x20000000ul, /*len=*/4ul);\r\n\r\nLet\u0026apos;s limit the max value of dctcp_shift_g by param_set_uint_minmax().\r\n\r\nWith this patch:\r\n\r\n # echo 10 \u0026gt; /sys/module/tcp_dctcp/parameters/dctcp_shift_g\n # cat /sys/module/tcp_dctcp/parameters/dctcp_shift_g\n 10\n # echo 11 \u0026gt; /sys/module/tcp_dctcp/parameters/dctcp_shift_g\n -bash: echo: write error: Invalid argument\r\n\r\n[0]:\nUBSAN: shift-out-of-bounds in net/ipv4/tcp_dctcp.c:143:12\nshift exponent 100 is too large for 32-bit type \u0026apos;u32\u0026apos; (aka \u0026apos;unsigned int\u0026apos;)\nCPU: 0 PID: 8083 Comm: syz-executor345 Not tainted 6.9.0-05151-g1b294a1f3561 #2\nHardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS\n1.13.0-1ubuntu1.1 04/01/2014\nCall Trace:\n \u0026lt;TASK\u0026gt;\n __dump_stack lib/dump_stack.c:88 [inline]\n dump_stack_lvl+0x201/0x300 lib/dump_stack.c:114\n ubsan_epilogue lib/ubsan.c:231 [inline]\n __ubsan_handle_shift_out_of_bounds+0x346/0x3a0 lib/ubsan.c:468\n dctcp_update_alpha+0x540/0x570 net/ipv4/tcp_dctcp.c:143\n tcp_in_ack_event net/ipv4/tcp_input.c:3802 [inline]\n tcp_ack+0x17b1/0x3bc0 net/ipv4/tcp_input.c:3948\n tcp_rcv_state_process+0x57a/0x2290 net/ipv4/tcp_input.c:6711\n tcp_v4_do_rcv+0x764/0xc40 net/ipv4/tcp_ipv4.c:1937\n sk_backlog_rcv include/net/sock.h:1106 [inline]\n __release_sock+0x20f/0x350 net/core/sock.c:2983\n release_sock+0x61/0x1f0 net/core/sock.c:3549\n mptcp_subflow_shutdown+0x3d0/0x620 net/mptcp/protocol.c:2907\n mptcp_check_send_data_fin+0x225/0x410 net/mptcp/protocol.c:2976\n __mptcp_close+0x238/0xad0 net/mptcp/protocol.c:3072\n mptcp_close+0x2a/0x1a0 net/mptcp/protocol.c:3127\n inet_release+0x190/0x1f0 net/ipv4/af_inet.c:437\n __sock_release net/socket.c:659 [inline]\n sock_close+0xc0/0x240 net/socket.c:1421\n __fput+0x41b/0x890 fs/file_table.c:422\n task_work_run+0x23b/0x300 kernel/task_work.c:180\n exit_task_work include/linux/task_work.h:38 [inline]\n do_exit+0x9c8/0x2540 kernel/exit.c:878\n do_group_exit+0x201/0x2b0 kernel/exit.c:1027\n __do_sys_exit_group kernel/exit.c:1038 [inline]\n __se_sys_exit_group kernel/exit.c:1036 [inline]\n __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1036\n do_syscall_x64 arch/x86/entry/common.c:52 [inline]\n do_syscall_64+0xe4/0x240 arch/x86/entry/common.c:83\n entry_SYSCALL_64_after_hwframe+0x67/0x6f\nRIP: 0033:0x7f6c2b5005b6\nCode: Unable to access opcode bytes at 0x7f6c2b50058c.\nRSP: 002b:00007ffe883eb948 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7\nRAX: ffffffffffffffda RBX: 00007f6c2b5862f0 RCX: 00007f6c2b5005b6\nRDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001\nRBP: 0000000000000001 R08: 00000000000000e7 R09: ffffffffffffffc0\nR10: 0000000000000006 R11: 0000000000000246 R12: 00007f6c2b5862f0\nR13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001\n \u0026lt;/TASK\u0026gt;(CVE-2024-37356)\r\n\r\nIn the Linux kernel, the following vulnerability has been resolved:\r\n\r\nof: module: add buffer overflow check in of_modalias()\r\n\r\nIn of_modalias(), if the buffer happens to be too small even for the 1st\nsnprintf() call, the len parameter will become negative and str parameter\n(if not NULL initially) will point beyond the buffer\u0026apos;s end. Add the buffer\noverflow check after the 1st snprintf() call and fix such check after the\nstrlen() call (accounting for the terminating NUL char).(CVE-2024-38541)\r\n\r\nIn the Linux kernel, the following vulnerability has been resolved:\r\n\r\nnet/mlx5: Add a timeout to acquire the command queue semaphore\r\n\r\nPrevent forced completion handling on an entry that has not yet been\nassigned an index, causing an out of bounds access on idx = -22.\nInstead of waiting indefinitely for the sem, blocking flow now waits for\nindex to be allocated or a sem acquisition timeout before beginning the\ntimer for FW completion.\r\n\r\nKernel log example:\nmlx5_core 0000:06:00.0: wait_func_handle_exec_timeout:1128:(pid 185911): cmd[-22]: CREATE_UCTX(0xa04) No done completion(CVE-2024-38556)\r\n\r\nIn the Linux kernel, the following vulnerability has been resolved:\r\n\r\nbpf: Add BPF_PROG_TYPE_CGROUP_SKB attach type enforcement in BPF_LINK_CREATE\r\n\r\nbpf_prog_attach uses attach_type_to_prog_type to enforce proper\nattach type for BPF_PROG_TYPE_CGROUP_SKB. link_create uses\nbpf_prog_get and relies on bpf_prog_attach_check_attach_type\nto properly verify prog_type \u0026lt;\u0026gt; attach_type association.\r\n\r\nAdd missing attach_type enforcement for the link_create case.\nOtherwise, it\u0026apos;s currently possible to attach cgroup_skb prog\ntypes to other cgroup hooks.(CVE-2024-38564)\r\n\r\nIn the Linux kernel, the following vulnerability has been resolved:\r\n\r\nftrace: Fix possible use-after-free issue in ftrace_location()\r\n\r\nKASAN reports a bug:\r\n\r\n BUG: KASAN: use-after-free in ftrace_location+0x90/0x120\n Read of size 8 at addr ffff888141d40010 by task insmod/424\n CPU: 8 PID: 424 Comm: insmod Tainted: G W 6.9.0-rc2+\n [...]\n Call Trace:\n \u0026lt;TASK\u0026gt;\n dump_stack_lvl+0x68/0xa0\n print_report+0xcf/0x610\n kasan_report+0xb5/0xe0\n ftrace_location+0x90/0x120\n register_kprobe+0x14b/0xa40\n kprobe_init+0x2d/0xff0 [kprobe_example]\n do_one_initcall+0x8f/0x2d0\n do_init_module+0x13a/0x3c0\n load_module+0x3082/0x33d0\n init_module_from_file+0xd2/0x130\n __x64_sys_finit_module+0x306/0x440\n do_syscall_64+0x68/0x140\n entry_SYSCALL_64_after_hwframe+0x71/0x79\r\n\r\nThe root cause is that, in lookup_rec(), ftrace record of some address\nis being searched in ftrace pages of some module, but those ftrace pages\nat the same time is being freed in ftrace_release_mod() as the\ncorresponding module is being deleted:\r\n\r\n CPU1 | CPU2\n register_kprobes() { | delete_module() {\n check_kprobe_address_safe() { |\n arch_check_ftrace_location() { |\n ftrace_location() { |\n lookup_rec() // USE! | ftrace_release_mod() // Free!\r\n\r\nTo fix this issue:\n 1. Hold rcu lock as accessing ftrace pages in ftrace_location_range();\n 2. Use ftrace_location_range() instead of lookup_rec() in\n ftrace_location();\n 3. Call synchronize_rcu() before freeing any ftrace pages both in\n ftrace_process_locs()/ftrace_release_mod()/ftrace_free_mem().(CVE-2024-38588)\r\n\r\nIn the Linux kernel, the following vulnerability has been resolved:\r\n\r\njffs2: prevent xattr node from overflowing the eraseblock\r\n\r\nAdd a check to make sure that the requested xattr node size is no larger\nthan the eraseblock minus the cleanmarker.\r\n\r\nUnlike the usual inode nodes, the xattr nodes aren\u0026apos;t split into parts\nand spread across multiple eraseblocks, which means that a xattr node\nmust not occupy more than one eraseblock. If the requested xattr value is\ntoo large, the xattr node can spill onto the next eraseblock, overwriting\nthe nodes and causing errors such as:\r\n\r\njffs2: argh. node added in wrong place at 0x0000b050(2)\njffs2: nextblock 0x0000a000, expected at 0000b00c\njffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,\nread=0xfc892c93, calc=0x000000\njffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed\nat 0x01e00c. {848f,2fc4,0fef511f,59a3d171}\njffs2: Node at 0x0000000c with length 0x00001044 would run over the\nend of the erase block\njffs2: Perhaps the file system was created with the wrong erase size?\njffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found\nat 0x00000010: 0x1044 instead\r\n\r\nThis breaks the filesystem and can lead to KASAN crashes such as:\r\n\r\nBUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0\nRead of size 4 at addr ffff88802c31e914 by task repro/830\nCPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1\nHardware name: QEMU Standard PC (i440FX + PIIX, 1996),\nBIOS Arch Linux 1.16.3-1-1 04/01/2014\nCall Trace:\n \u0026lt;TASK\u0026gt;\n dump_stack_lvl+0xc6/0x120\n print_report+0xc4/0x620\n ? __virt_addr_valid+0x308/0x5b0\n kasan_report+0xc1/0xf0\n ? jffs2_sum_add_kvec+0x125e/0x15d0\n ? jffs2_sum_add_kvec+0x125e/0x15d0\n jffs2_sum_add_kvec+0x125e/0x15d0\n jffs2_flash_direct_writev+0xa8/0xd0\n jffs2_flash_writev+0x9c9/0xef0\n ? __x64_sys_setxattr+0xc4/0x160\n ? do_syscall_64+0x69/0x140\n ? entry_SYSCALL_64_after_hwframe+0x76/0x7e\n [...]\r\n\r\nFound by Linux Verification Center (linuxtesting.org) with Syzkaller.(CVE-2024-38599)\r\n\r\nIn the Linux kernel, the following vulnerability has been resolved:\r\n\r\nfs/ntfs3: Use variable length array instead of fixed size\r\n\r\nShould fix smatch warning:\n\tntfs_set_label() error: __builtin_memcpy() \u0026apos;uni-\u0026gt;name\u0026apos; too small (20 vs 256)(CVE-2024-38623)\r\n\r\nIn the Linux kernel, the following vulnerability has been resolved:\r\n\r\nfs/ntfs3: Use 64 bit variable to avoid 32 bit overflow\r\n\r\nFor example, in the expression:\n\tvbo = 2 * vbo + skip(CVE-2024-38624)\r\n\r\nIn the Linux kernel, the following vulnerability has been resolved:\r\n\r\nwatchdog: cpu5wdt.c: Fix use-after-free bug caused by cpu5wdt_trigger\r\n\r\nWhen the cpu5wdt module is removing, the origin code uses del_timer() to\nde-activate the timer. If the timer handler is running, del_timer() could\nnot stop it and will return directly. If the port region is released by\nrelease_region() and then the timer handler cpu5wdt_trigger() calls outb()\nto write into the region that is released, the use-after-free bug will\nhappen.\r\n\r\nChange del_timer() to timer_shutdown_sync() in order that the timer handler\ncould be finished before the port region is released.(CVE-2024-38630)\r\n\r\nIn the Linux kernel, the following vulnerability has been resolved:\r\n\r\ns390/ap: Fix crash in AP internal function modify_bitmap()\r\n\r\nA system crash like this\r\n\r\n Failing address: 200000cb7df6f000 TEID: 200000cb7df6f403\n Fault in home space mode while using kernel ASCE.\n AS:00000002d71bc007 R3:00000003fe5b8007 S:000000011a446000 P:000000015660c13d\n Oops: 0038 ilc:3 [#1] PREEMPT SMP\n Modules linked in: mlx5_ib ...\n CPU: 8 PID: 7556 Comm: bash Not tainted 6.9.0-rc7 #8\n Hardware name: IBM 3931 A01 704 (LPAR)\n Krnl PSW : 0704e00180000000 0000014b75e7b606 (ap_parse_bitmap_str+0x10e/0x1f8)\n R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3\n Krnl GPRS: 0000000000000001 ffffffffffffffc0 0000000000000001 00000048f96b75d3\n 000000cb00000100 ffffffffffffffff ffffffffffffffff 000000cb7df6fce0\n 000000cb7df6fce0 00000000ffffffff 000000000000002b 00000048ffffffff\n 000003ff9b2dbc80 200000cb7df6fcd8 0000014bffffffc0 000000cb7df6fbc8\n Krnl Code: 0000014b75e7b5fc: a7840047 brc 8,0000014b75e7b68a\n 0000014b75e7b600: 18b2 lr %r11,%r2\n #0000014b75e7b602: a7f4000a brc 15,0000014b75e7b616\n \u0026gt;0000014b75e7b606: eb22d00000e6 laog %r2,%r2,0(%r13)\n 0000014b75e7b60c: a7680001 lhi %r6,1\n 0000014b75e7b610: 187b lr %r7,%r11\n 0000014b75e7b612: 84960021 brxh %r9,%r6,0000014b75e7b654\n 0000014b75e7b616: 18e9 lr %r14,%r9\n Call Trace:\n [\u0026lt;0000014b75e7b606\u0026gt;] ap_parse_bitmap_str+0x10e/0x1f8\n ([\u0026lt;0000014b75e7b5dc\u0026gt;] ap_parse_bitmap_str+0xe4/0x1f8)\n [\u0026lt;0000014b75e7b758\u0026gt;] apmask_store+0x68/0x140\n [\u0026lt;0000014b75679196\u0026gt;] kernfs_fop_write_iter+0x14e/0x1e8\n [\u0026lt;0000014b75598524\u0026gt;] vfs_write+0x1b4/0x448\n [\u0026lt;0000014b7559894c\u0026gt;] ksys_write+0x74/0x100\n [\u0026lt;0000014b7618a440\u0026gt;] __do_syscall+0x268/0x328\n [\u0026lt;0000014b761a3558\u0026gt;] system_call+0x70/0x98\n INFO: lockdep is turned off.\n Last Breaking-Event-Address:\n [\u0026lt;0000014b75e7b636\u0026gt;] ap_parse_bitmap_str+0x13e/0x1f8\n Kernel panic - not syncing: Fatal exception: panic_on_oops\r\n\r\noccured when /sys/bus/ap/a[pq]mask was updated with a relative mask value\n(like +0x10-0x12,+60,-90) with one of the numeric values exceeding INT_MAX.\r\n\r\nThe fix is simple: use unsigned long values for the internal variables. The\ncorrect checks are already in place in the function but a simple int for\nthe internal variables was used with the possibility to overflow.(CVE-2024-38661)\r\n\r\nIn the Linux kernel, the following vulnerability has been resolved:\r\n\r\num: Add winch to winch_handlers before registering winch IRQ\r\n\r\nRegistering a winch IRQ is racy, an interrupt may occur before the winch is\nadded to the winch_handlers list.\r\n\r\nIf that happens, register_winch_irq() adds to that list a winch that is\nscheduled to be (or has already been) freed, causing a panic later in\nwinch_cleanup().\r\n\r\nAvoid the race by adding the winch to the winch_handlers list before\nregistering the IRQ, and rolling back if um_request_irq() fails.(CVE-2024-39292)",
"id": "OESA-2024-1796",
"modified": "2026-08-06T11:07:15Z",
"published": "2024-07-05T11:07:15Z",
"references": [
{
"type": "ADVISORY",
"url": "https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-1796"
},
{
"type": "ADVISORY",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2024-35821"
},
{
"type": "ADVISORY",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2024-35955"
},
{
"type": "ADVISORY",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2024-36974"
},
{
"type": "ADVISORY",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2024-37356"
},
{
"type": "ADVISORY",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2024-38541"
},
{
"type": "ADVISORY",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2024-38556"
},
{
"type": "ADVISORY",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2024-38564"
},
{
"type": "ADVISORY",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2024-38588"
},
{
"type": "ADVISORY",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2024-38599"
},
{
"type": "ADVISORY",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2024-38623"
},
{
"type": "ADVISORY",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2024-38624"
},
{
"type": "ADVISORY",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2024-38630"
},
{
"type": "ADVISORY",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2024-38661"
},
{
"type": "ADVISORY",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2024-39292"
}
],
"schema_version": "1.7.2",
"severity": [
{
"score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H",
"type": "CVSS_V3"
}
],
"summary": "kernel security update",
"upstream": [
"CVE-2024-35821",
"CVE-2024-35955",
"CVE-2024-36974",
"CVE-2024-37356",
"CVE-2024-38541",
"CVE-2024-38556",
"CVE-2024-38564",
"CVE-2024-38588",
"CVE-2024-38599",
"CVE-2024-38623",
"CVE-2024-38624",
"CVE-2024-38630",
"CVE-2024-38661",
"CVE-2024-39292"
]
}
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.