ICSA-26-225-08
Vulnerability from csaf_cisa - Published: 2026-08-11 00:00 - Updated: 2026-08-13 06:00The affected devices are vulnerable to a denial-of-service (DoS) vulnerability. An attacker can exploit this issue by sending a malformed BACnet packet, causing the device to stop responding to BACnet queries. Recovery requires a device reset or reboot to restore normal functionality.
| Product | Identifier | Version | Remediation |
|---|---|---|---|
|
Desigo DXR2 < V01.21.233.16-7862
Siemens / Desigo DXR2
|
vers:intdot/<01.21.233.16-7862 |
Vendor Fix
|
|
|
Desigo PXC3 < V01.21.233.16-7862
Siemens / Desigo PXC3
|
vers:intdot/<01.21.233.16-7862 |
Vendor Fix
|
|
|
Desigo PXC4 < V02.21.194.36-2715
Siemens / Desigo PXC4
|
vers:intdot/<02.21.194.36-2715 |
Vendor Fix
|
|
|
Desigo PXC5.E003 < V02.21.194.36-2715
Siemens / Desigo PXC5.E003
|
vers:intdot/<02.21.194.36-2715 |
Vendor Fix
|
|
|
Desigo PXC5.E24 < V02.21.194.36-2715
Siemens / Desigo PXC5.E24
|
vers:intdot/<02.21.194.36-2715 |
Vendor Fix
|
|
|
Desigo PXC7 < V02.21.194.36-2715
Siemens / Desigo PXC7
|
vers:intdot/<02.21.194.36-2715 |
Vendor Fix
|
{
"document": {
"acknowledgments": [
{
"names": [
"Thomas EBI"
],
"organization": "Sauter",
"summary": "reported this vulnerability to Siemens"
}
],
"category": "csaf_security_advisory",
"csaf_version": "2.0",
"distribution": {
"text": "Disclosure is not limited",
"tlp": {
"label": "WHITE",
"url": "https://www.cisa.gov/news-events/news/traffic-light-protocol-tlp-definitions-and-usage"
}
},
"lang": "en",
"notes": [
{
"category": "summary",
"text": "A vulnerability in Desigo DXR and PXC controllers has been identified that could allow an attacker to cause denial of service conditions by sending malformed BACnet packets. Recovery requires a device reset or reboot to restore normal functionality.\n\nSiemens has released new versions for the affected products and recommends to update to the latest versions.",
"title": "Summary"
},
{
"category": "general",
"text": "As a general security measure, Siemens strongly recommends protecting network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends configuring the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: https://www.siemens.com/cert/operational-guidelines-industrial-security), and following the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
"title": "General Recommendations"
},
{
"category": "general",
"text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
"title": "Additional Resources"
},
{
"category": "legal_disclaimer",
"text": "The use of Siemens Security Advisories is subject to the terms and conditions listed on: https://www.siemens.com/productcert/terms-of-use.",
"title": "Terms of Use"
},
{
"category": "legal_disclaimer",
"text": "This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy \u0026 Use policy (https://www.cisa.gov/privacy-policy).",
"title": "Legal Notice and Terms of Use"
},
{
"category": "other",
"text": "This ICSA is a verbatim republication of Siemens SSA-781903 from a direct conversion of the vendor\u0027s Common Security Advisory Framework (CSAF) advisory. This is republished to CISA\u0027s website as a means of increasing visibility and is provided \"as-is\" for informational purposes only. CISA is not responsible for the editorial or technical accuracy of republished advisories and provides no warranties of any kind regarding any information contained within this advisory. Further, CISA does not endorse any commercial product or service. Please contact Siemens ProductCERT directly for any questions regarding this advisory.",
"title": "Advisory Conversion Disclaimer"
},
{
"category": "general",
"text": "CISA recommends users take defensive measures to minimize the exploitation risk of these vulnerabilities. Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet. Locate control system networks and remote devices behind firewalls and isolate them from business networks. When remote access is required, use more secure methods, such as virtual private networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
"title": "Recommended Practices"
},
{
"category": "general",
"text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
"title": "Recommended Practices"
},
{
"category": "general",
"text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
"title": "Recommended Practices"
},
{
"category": "general",
"text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
"title": "Recommended Practices"
},
{
"category": "general",
"text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
"title": "Recommended Practices"
},
{
"category": "other",
"text": "Commercial Facilities, Critical Manufacturing, Energy, Healthcare and Public Health, Transportation Systems",
"title": "Critical infrastructure sectors"
},
{
"category": "other",
"text": "Worldwide",
"title": "Countries/areas deployed"
},
{
"category": "other",
"text": "Germany",
"title": "Company headquarters location"
}
],
"publisher": {
"category": "other",
"contact_details": "central@cisa.dhs.gov",
"name": "CISA",
"namespace": "https://www.cisa.gov/"
},
"references": [
{
"category": "self",
"summary": "SSA-781903: Denial of Service Vulnerability in Desigo DXR and PXC Controllers - CSAF Version",
"url": "https://cert-portal.siemens.com/productcert/csaf/ssa-781903.json"
},
{
"category": "self",
"summary": "SSA-781903: Denial of Service Vulnerability in Desigo DXR and PXC Controllers - HTML Version",
"url": "https://cert-portal.siemens.com/productcert/html/ssa-781903.html"
},
{
"category": "self",
"summary": "ICS Advisory ICSA-26-225-08 JSON",
"url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2026/ICSA-26-225-08.json"
},
{
"category": "self",
"summary": "ICS Advisory ICSA-26-225-08 - Web Version",
"url": "https://www.cisa.gov/news-events/ics-advisories/ICSA-26-225-08"
},
{
"category": "external",
"summary": "Recommended Practices",
"url": "https://www.cisa.gov/news-events/ics-alerts/ics-alert-10-301-01"
},
{
"category": "external",
"summary": "Recommended Practices",
"url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
},
{
"category": "external",
"summary": "Recommended Practices",
"url": "https://www.cisa.gov/topics/industrial-control-systems"
},
{
"category": "external",
"summary": "Recommended Practices",
"url": "https://www.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
},
{
"category": "external",
"summary": "Recommended Practices",
"url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
},
{
"category": "external",
"summary": "Recommended Practices",
"url": "https://www.cisa.gov/news-events/news/targeted-cyber-intrusion-detection-and-mitigation-strategies-update-b"
}
],
"title": "Siemens Desigo DXR and PXC Controllers",
"tracking": {
"current_release_date": "2026-08-13T06:00:00.000000Z",
"generator": {
"date": "2026-08-11T17:58:05.727651Z",
"engine": {
"name": "CISA CSAF Generator",
"version": "1.5.0"
}
},
"id": "ICSA-26-225-08",
"initial_release_date": "2026-08-11T00:00:00.000000Z",
"revision_history": [
{
"date": "2026-08-11T00:00:00.000000Z",
"legacy_version": "Initial",
"number": "1",
"summary": "Publication Date"
},
{
"date": "2026-08-13T06:00:00.000000Z",
"legacy_version": "CISA Republication",
"number": "2",
"summary": "Initial CISA Republication of Siemens SSA-781903 advisory"
}
],
"status": "final",
"version": "2"
}
},
"product_tree": {
"branches": [
{
"branches": [
{
"branches": [
{
"category": "product_version_range",
"name": "vers:intdot/\u003c01.21.233.16-7862",
"product": {
"name": "Desigo DXR2 \u003c V01.21.233.16-7862",
"product_id": "CSAFPID-0001"
}
}
],
"category": "product_name",
"name": "Desigo DXR2"
},
{
"branches": [
{
"category": "product_version_range",
"name": "vers:intdot/\u003c01.21.233.16-7862",
"product": {
"name": "Desigo PXC3 \u003c V01.21.233.16-7862",
"product_id": "CSAFPID-0002"
}
}
],
"category": "product_name",
"name": "Desigo PXC3"
},
{
"branches": [
{
"category": "product_version_range",
"name": "vers:intdot/\u003c02.21.194.36-2715",
"product": {
"name": "Desigo PXC4 \u003c V02.21.194.36-2715",
"product_id": "CSAFPID-0003"
}
}
],
"category": "product_name",
"name": "Desigo PXC4"
},
{
"branches": [
{
"category": "product_version_range",
"name": "vers:intdot/\u003c02.21.194.36-2715",
"product": {
"name": "Desigo PXC5.E003 \u003c V02.21.194.36-2715",
"product_id": "CSAFPID-0004"
}
}
],
"category": "product_name",
"name": "Desigo PXC5.E003"
},
{
"branches": [
{
"category": "product_version_range",
"name": "vers:intdot/\u003c02.21.194.36-2715",
"product": {
"name": "Desigo PXC5.E24 \u003c V02.21.194.36-2715",
"product_id": "CSAFPID-0005"
}
}
],
"category": "product_name",
"name": "Desigo PXC5.E24"
},
{
"branches": [
{
"category": "product_version_range",
"name": "vers:intdot/\u003c02.21.194.36-2715",
"product": {
"name": "Desigo PXC7 \u003c V02.21.194.36-2715",
"product_id": "CSAFPID-0006"
}
}
],
"category": "product_name",
"name": "Desigo PXC7"
}
],
"category": "vendor",
"name": "Siemens"
}
]
},
"vulnerabilities": [
{
"cve": "CVE-2026-59693",
"cwe": {
"id": "CWE-754",
"name": "Improper Check for Unusual or Exceptional Conditions"
},
"notes": [
{
"category": "description",
"text": "The affected devices are vulnerable to a denial-of-service (DoS) vulnerability. An attacker can exploit this issue by sending a malformed BACnet packet, causing the device to stop responding to BACnet queries. Recovery requires a device reset or reboot to restore normal functionality.",
"title": "CVE Description"
}
],
"product_status": {
"known_affected": [
"CSAFPID-0001",
"CSAFPID-0002",
"CSAFPID-0003",
"CSAFPID-0004",
"CSAFPID-0005",
"CSAFPID-0006"
]
},
"references": [
{
"category": "external",
"summary": "www.cve.org",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-59693"
},
{
"category": "external",
"summary": "cwe.mitre.org",
"url": "https://cwe.mitre.org/data/definitions/754.html"
},
{
"category": "external",
"summary": "www.first.org",
"url": "https://www.first.org/cvss/calculator/3.1#CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L"
}
],
"remediations": [
{
"category": "vendor_fix",
"details": "Update to V01.21.233.16-7862 or later version\nPlease contact your local Siemens office for additional support in obtaining the update.",
"product_ids": [
"CSAFPID-0001",
"CSAFPID-0002"
]
},
{
"category": "vendor_fix",
"details": "Update to V02.21.194.36-2715 or later version\nPlease contact your local Siemens office for additional support in obtaining the update.",
"product_ids": [
"CSAFPID-0003",
"CSAFPID-0004",
"CSAFPID-0005",
"CSAFPID-0006"
]
}
],
"scores": [
{
"cvss_v3": {
"baseScore": 4.3,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
"version": "3.1"
},
"products": [
"CSAFPID-0001",
"CSAFPID-0002",
"CSAFPID-0003",
"CSAFPID-0004",
"CSAFPID-0005",
"CSAFPID-0006"
]
}
],
"title": "CVE-2026-59693"
}
]
}
Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline
Sightings and recorded dates, grouped by day · UTC
How durations are calculated
Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.
Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.
Loading timeline…
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.