ICSA-22-174-02

Vulnerability from csaf_cisa - Published: 2022-06-23 00:00 - Updated: 2022-06-23 00:00
Summary
Yokogawa CAMS for HIS
Notes
CISA Disclaimer: This CSAF advisory was extracted from unstructured data and may contain inaccuracies. If you notice any errors, please reach out to the designated contact at CISA CSAF: central@cisa.dhs.gov
Legal Notice: All information products included in https://us-cert.cisa.gov/ics are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.
Risk evaluation: If a computer using CAMS for HIS software is compromised, it can be used to compromise any number of other computers using CAMS for HIS software with the potential to crash any affected software.
Critical infrastructure sectors: Critical Manufacturing, Energy, Food and Agriculture
Countries/areas deployed: Worldwide
Company headquarters location: Japan
Recommended Practices: CISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability.
Recommended Practices: CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures. CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/icsSeveral recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Recommended Practices: Additional mitigation guidance and recommended practices are publicly available on the ICS webpage on cisa.gov/icsin the Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies. Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to CISA for tracking and correlation against other incidents.
Exploitability: No known public exploits specifically target this vulnerability. This vulnerability is not exploitable remotely.
CVE-2022-30707
6.4 (Medium)
CVSS:3.0/AV:A/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H
CWE-657 - Violation of Secure Design Principles
Affected products
Product Identifier Version Remediation
B/M9000 VP: Versions R6.01.01 - R8.03.01
Yokogawa / B/M9000 VP
 >= R6.01.01 | <= R8.03.01
Mitigation
Mitigation
Mitigation
Vendor Fix
Mitigation
Mitigation fix
Mitigation fix
Mitigation fix
B/M9000CS: Versions R5.04.01 - R5.05.01
Yokogawa / B/M9000CS
 >= R5.04.01 | <= R5.05.01
Mitigation
Mitigation
Mitigation
Vendor Fix
Mitigation
Mitigation fix
Mitigation fix
Mitigation fix
CENTUM CS 3000 (including CENTUM CS 3000 Entry Class): Versions R3.08.10 through R3.09.00. These vulnerabilities affect this product if LHS4800 (CAMS for HIS) is installed
Yokogawa / CENTUM CS 3000 (including CENTUM CS 3000 Entry Class)
 >= R3.08.10 | <= R3.09.00. | LHS4800 (CAMS for HIS) is installed.
Mitigation
Mitigation
Mitigation
Vendor Fix
Mitigation
Mitigation fix
Mitigation fix
Mitigation fix
CENTUM VP (including CENTUM VP Entry Class): Versions R4.01.00 through R4.03.00 (these product versions are affected only if CAMS function is used) Versions R5.01.00 through R5.04.20 and R6.01.00 through R6.09.00 (these product versions are affected regardless of whether CAMS function is used or not)
Yokogawa / CENTUM VP (including CENTUM VP Entry Class)
 >= R4.01.00 | <= R4.03.00 (these product versions are affected only if CAMS function is used) Versions R5.01.00 through R5.04.20 and R6.01.00 through R6.09.00 (these product versions are affected regardless of whether CAMS function is used or not)
Mitigation
Mitigation
Mitigation
Vendor Fix
Mitigation
Mitigation fix
Mitigation fix
Mitigation fix
Exaopc: Versions R3.72.00 through R3.80.00 (these product versions are affected if NTPF100-S6 "For CENTUM VP Support CAMS for HIS" is installed).
Yokogawa / Exaopc
 >= R3.72.00 | <= R3.80.00 (these product versions are affected if NTPF100-S6 "For CENTUM VP Support CAMS for HIS" is installed)
Mitigation
Mitigation
Mitigation
Vendor Fix
Mitigation
Mitigation fix
Mitigation fix
Mitigation fix
References
Acknowledgments
Dragos, Inc Jacob Baines
To clipboard 

{
  "document": {
    "acknowledgments": [
      {
        "names": [
          "Jacob Baines"
        ],
        "organization": "Dragos, Inc",
        "summary": "reporting this vulnerability to Yokogawa"
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en-US",
    "notes": [
      {
        "category": "general",
        "text": "This CSAF advisory was extracted from unstructured data and may contain inaccuracies. If you notice any errors, please reach out to the designated contact at CISA CSAF: central@cisa.dhs.gov",
        "title": "CISA Disclaimer"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "summary",
        "text": "If a computer using CAMS for HIS software is compromised, it can be used to compromise any number of other computers using CAMS for HIS software with the potential to crash any affected software.",
        "title": "Risk evaluation"
      },
      {
        "category": "other",
        "text": "Critical Manufacturing, Energy, Food and Agriculture",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Japan",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.\nCISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/icsSeveral recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Additional mitigation guidance and recommended practices are publicly available on the ICS webpage on cisa.gov/icsin the Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.\nOrganizations observing any suspected malicious activity should follow their established internal procedures and report their findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      },
      {
        "category": "other",
        "text": "No known public exploits specifically target this vulnerability. This vulnerability is not exploitable remotely.",
        "title": "Exploitability"
      }
    ],
    "publisher": {
      "category": "coordinator",
      "contact_details": "Email: CISAservicedesk@cisa.dhs.gov;\n Toll Free: 1-888-282-0870",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-22-174-02 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2022/icsa-22-174-02.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-22-174-02 Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-22-174-02"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-22-174-02"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Yokogawa CAMS for HIS",
    "tracking": {
      "current_release_date": "2022-06-23T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-22-174-02",
      "initial_release_date": "2022-06-23T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2022-06-23T00:00:00.000000Z",
          "legacy_version": "Initial",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e= R6.01.01 | \u003c= R8.03.01",
                "product": {
                  "name": "B/M9000 VP: Versions R6.01.01 - R8.03.01",
                  "product_id": "CSAFPID-0001"
                }
              }
            ],
            "category": "product_name",
            "name": "B/M9000 VP"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e= R5.04.01 | \u003c= R5.05.01",
                "product": {
                  "name": "B/M9000CS: Versions R5.04.01 - R5.05.01",
                  "product_id": "CSAFPID-0002"
                }
              }
            ],
            "category": "product_name",
            "name": "B/M9000CS"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e= R3.08.10 | \u003c= R3.09.00. | LHS4800 (CAMS for HIS)  is installed.",
                "product": {
                  "name": "CENTUM CS 3000 (including CENTUM CS 3000 Entry Class): Versions R3.08.10 through R3.09.00. These vulnerabilities affect this product if LHS4800 (CAMS for HIS) is installed",
                  "product_id": "CSAFPID-0003"
                }
              }
            ],
            "category": "product_name",
            "name": "CENTUM CS 3000 (including CENTUM CS 3000 Entry Class)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e= R4.01.00 | \u003c= R4.03.00 (these product versions are affected only if CAMS function is used) Versions R5.01.00 through R5.04.20 and R6.01.00 through R6.09.00 (these product versions are affected regardless of whether CAMS function is used or not)",
                "product": {
                  "name": "CENTUM VP (including CENTUM VP Entry Class): Versions R4.01.00 through R4.03.00 (these product versions are affected only if CAMS function is used) Versions R5.01.00 through R5.04.20 and R6.01.00 through R6.09.00 (these product versions are affected regardless of whether CAMS function is used or not)",
                  "product_id": "CSAFPID-0004"
                }
              }
            ],
            "category": "product_name",
            "name": "CENTUM VP (including CENTUM VP Entry Class)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e= R3.72.00 | \u003c= R3.80.00 (these product versions are affected if NTPF100-S6 \"For CENTUM VP Support CAMS for HIS\" is installed)",
                "product": {
                  "name": "Exaopc: Versions R3.72.00 through R3.80.00 (these product versions are affected if NTPF100-S6 \"For CENTUM VP Support CAMS for HIS\" is installed).",
                  "product_id": "CSAFPID-0005"
                }
              }
            ],
            "category": "product_name",
            "name": "Exaopc"
          }
        ],
        "category": "vendor",
        "name": "Yokogawa"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-30707",
      "cwe": {
        "id": "CWE-657",
        "name": "Violation of Secure Design Principles"
      },
      "notes": [
        {
          "category": "summary",
          "text": "If an attacker successfully compromises a computer using CAMS for HIS software, they can use credentials from the compromised machine to access data from another machine using CAMS for HIS software. This can lead to a disabling of CAMS for HIS software functions on any affected machines. CVE-2022-30707 has been assigned to this vulnerability. A CVSS v3 base score of 6.4 has been calculated; the CVSS vector string is (AV:A/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H).",
          "title": "Vulnerability Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "web.nvd.nist.gov",
          "url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2022-30707"
        },
        {
          "category": "external",
          "summary": "www.first.org",
          "url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:A/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "CENTUM CS 3000 (Including CENTUM CS 3000 Entry Class): No software patch will be made available as these products are end-of-life. Upgrade systems to the latest version of CENTUM VP.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "Versions R4.01.00 through R4.03.00, and R5.01.00 through R5.04.20: No software patch will be made available as these products are end-of-life. Consider upgrading systems to the latest version of CENTUM VP.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "Versions R6.01.00 through R6.09.00: Update systems to Version R6.09.00 and apply software patch R6.09.03",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Exaopc: Update systems to Version R3.80.00 and apply software patch R3.80.01",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "B/M9000CS and B/M9000 VP: These products are not directly affected by the vulnerability. However, these products are affected if CENTUM is installed on the same PC. If CENTUM is installed, update as described above. Also update B/M9000 to the latest version.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "Please see Yokogawa Security Advisory Report YSAR-22-0006 at the following locations for more information: English",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://web-material3.yokogawa.com/1/32780/files/YSAR-22-0006-E.pdf"
        },
        {
          "category": "mitigation",
          "details": "Please see Yokogawa Security Advisory Report YSAR-22-0006 at the following locations for more information: Japanese",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://web-material3.yokogawa.com/19/32780/files/YSAR-22-0006-J.pdf"
        },
        {
          "category": "mitigation",
          "details": "For questions related to these mitigations, please contact Yokogawa.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://contact.yokogawa.com/cs/gw?c-id=000498"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.0/AV:A/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H",
            "version": "3.0"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ]
    }
  ]
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Loading timeline…




    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.