GSD-2017-8229
Vulnerability from gsd - Updated: 2023-12-13 01:21{
"GSD": {
"alias": "CVE-2017-8229",
"description": "Amcrest IPM-721S V2.420.AC00.16.R.20160909 devices allow an unauthenticated attacker to download the administrative credentials. If the firmware version V2.420.AC00.16.R 9/9/2016 is dissected using binwalk tool, one obtains a _user-x.squashfs.img.extracted archive which contains the filesystem set up on the device that many of the binaries in the /usr folder. The binary \"sonia\" is the one that has the vulnerable function that sets up the default credentials on the device. If one opens this binary in IDA-pro one will notice that this follows a ARM little endian format. The function sub_436D6 in IDA pro is identified to be setting up the configuration for the device. If one scrolls to the address 0x000437C2 then one can see that /current_config is being set as an ALIAS for /mnt/mtd/Config folder on the device. If one TELNETs into the device and navigates to /mnt/mtd/Config folder, one can observe that it contains various files such as Account1, Account2, SHAACcount1, etc. This means that if one navigates to http://[IPofcamera]/current_config/Sha1Account1 then one should be able to view the content of the files. The security researchers assumed that this was only possible only after authentication to the device. However, when unauthenticated access tests were performed for the same URL as provided above, it was observed that the device file could be downloaded without any authentication.",
"id": "GSD-2017-8229",
"references": [
"https://packetstormsecurity.com/files/cve/CVE-2017-8229"
]
},
"gsd": {
"metadata": {
"exploitCode": "unknown",
"remediation": "unknown",
"reportConfidence": "confirmed",
"type": "vulnerability"
},
"osvSchema": {
"aliases": [
"CVE-2017-8229"
],
"details": "Amcrest IPM-721S V2.420.AC00.16.R.20160909 devices allow an unauthenticated attacker to download the administrative credentials. If the firmware version V2.420.AC00.16.R 9/9/2016 is dissected using binwalk tool, one obtains a _user-x.squashfs.img.extracted archive which contains the filesystem set up on the device that many of the binaries in the /usr folder. The binary \"sonia\" is the one that has the vulnerable function that sets up the default credentials on the device. If one opens this binary in IDA-pro one will notice that this follows a ARM little endian format. The function sub_436D6 in IDA pro is identified to be setting up the configuration for the device. If one scrolls to the address 0x000437C2 then one can see that /current_config is being set as an ALIAS for /mnt/mtd/Config folder on the device. If one TELNETs into the device and navigates to /mnt/mtd/Config folder, one can observe that it contains various files such as Account1, Account2, SHAACcount1, etc. This means that if one navigates to http://[IPofcamera]/current_config/Sha1Account1 then one should be able to view the content of the files. The security researchers assumed that this was only possible only after authentication to the device. However, when unauthenticated access tests were performed for the same URL as provided above, it was observed that the device file could be downloaded without any authentication.",
"id": "GSD-2017-8229",
"modified": "2023-12-13T01:21:08.522749Z",
"schema_version": "1.4.0"
}
},
"namespaces": {
"cve.org": {
"CVE_data_meta": {
"ASSIGNER": "cve@mitre.org",
"ID": "CVE-2017-8229",
"STATE": "PUBLIC"
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "n/a",
"version": {
"version_data": [
{
"version_value": "n/a"
}
]
}
}
]
},
"vendor_name": "n/a"
}
]
}
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "Amcrest IPM-721S V2.420.AC00.16.R.20160909 devices allow an unauthenticated attacker to download the administrative credentials. If the firmware version V2.420.AC00.16.R 9/9/2016 is dissected using binwalk tool, one obtains a _user-x.squashfs.img.extracted archive which contains the filesystem set up on the device that many of the binaries in the /usr folder. The binary \"sonia\" is the one that has the vulnerable function that sets up the default credentials on the device. If one opens this binary in IDA-pro one will notice that this follows a ARM little endian format. The function sub_436D6 in IDA pro is identified to be setting up the configuration for the device. If one scrolls to the address 0x000437C2 then one can see that /current_config is being set as an ALIAS for /mnt/mtd/Config folder on the device. If one TELNETs into the device and navigates to /mnt/mtd/Config folder, one can observe that it contains various files such as Account1, Account2, SHAACcount1, etc. This means that if one navigates to http://[IPofcamera]/current_config/Sha1Account1 then one should be able to view the content of the files. The security researchers assumed that this was only possible only after authentication to the device. However, when unauthenticated access tests were performed for the same URL as provided above, it was observed that the device file could be downloaded without any authentication."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "n/a"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "20190609 Newly releases IoT security issues",
"refsource": "BUGTRAQ",
"url": "https://seclists.org/bugtraq/2019/Jun/8"
},
{
"name": "http://packetstormsecurity.com/files/153224/Amcrest-IPM-721S-Credential-Disclosure-Privilege-Escalation.html",
"refsource": "MISC",
"url": "http://packetstormsecurity.com/files/153224/Amcrest-IPM-721S-Credential-Disclosure-Privilege-Escalation.html"
},
{
"name": "https://github.com/ethanhunnt/IoT_vulnerabilities/blob/master/Amcrest_sec_issues.pdf",
"refsource": "MISC",
"url": "https://github.com/ethanhunnt/IoT_vulnerabilities/blob/master/Amcrest_sec_issues.pdf"
}
]
}
},
"nvd.nist.gov": {
"configurations": {
"CVE_data_version": "4.0",
"nodes": [
{
"children": [
{
"children": [],
"cpe_match": [
{
"cpe23Uri": "cpe:2.3:o:amcrest:ipm-721s_firmware:*:*:*:*:*:*:*:*",
"cpe_name": [],
"versionEndIncluding": "2.420.ac00.16.r.20160909",
"vulnerable": true
}
],
"operator": "OR"
},
{
"children": [],
"cpe_match": [
{
"cpe23Uri": "cpe:2.3:h:amcrest:ipm-721s:-:*:*:*:*:*:*:*",
"cpe_name": [],
"vulnerable": false
}
],
"operator": "OR"
}
],
"cpe_match": [],
"operator": "AND"
}
]
},
"cve": {
"CVE_data_meta": {
"ASSIGNER": "cve@mitre.org",
"ID": "CVE-2017-8229"
},
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "en",
"value": "Amcrest IPM-721S V2.420.AC00.16.R.20160909 devices allow an unauthenticated attacker to download the administrative credentials. If the firmware version V2.420.AC00.16.R 9/9/2016 is dissected using binwalk tool, one obtains a _user-x.squashfs.img.extracted archive which contains the filesystem set up on the device that many of the binaries in the /usr folder. The binary \"sonia\" is the one that has the vulnerable function that sets up the default credentials on the device. If one opens this binary in IDA-pro one will notice that this follows a ARM little endian format. The function sub_436D6 in IDA pro is identified to be setting up the configuration for the device. If one scrolls to the address 0x000437C2 then one can see that /current_config is being set as an ALIAS for /mnt/mtd/Config folder on the device. If one TELNETs into the device and navigates to /mnt/mtd/Config folder, one can observe that it contains various files such as Account1, Account2, SHAACcount1, etc. This means that if one navigates to http://[IPofcamera]/current_config/Sha1Account1 then one should be able to view the content of the files. The security researchers assumed that this was only possible only after authentication to the device. However, when unauthenticated access tests were performed for the same URL as provided above, it was observed that the device file could be downloaded without any authentication."
}
]
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "en",
"value": "CWE-255"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "http://packetstormsecurity.com/files/153224/Amcrest-IPM-721S-Credential-Disclosure-Privilege-Escalation.html",
"refsource": "MISC",
"tags": [
"Third Party Advisory",
"VDB Entry"
],
"url": "http://packetstormsecurity.com/files/153224/Amcrest-IPM-721S-Credential-Disclosure-Privilege-Escalation.html"
},
{
"name": "https://github.com/ethanhunnt/IoT_vulnerabilities/blob/master/Amcrest_sec_issues.pdf",
"refsource": "MISC",
"tags": [
"Exploit",
"Third Party Advisory"
],
"url": "https://github.com/ethanhunnt/IoT_vulnerabilities/blob/master/Amcrest_sec_issues.pdf"
},
{
"name": "20190609 Newly releases IoT security issues",
"refsource": "BUGTRAQ",
"tags": [
"Mailing List",
"Third Party Advisory"
],
"url": "https://seclists.org/bugtraq/2019/Jun/8"
}
]
}
},
"impact": {
"baseMetricV2": {
"acInsufInfo": false,
"cvssV2": {
"accessComplexity": "LOW",
"accessVector": "NETWORK",
"authentication": "NONE",
"availabilityImpact": "NONE",
"baseScore": 5.0,
"confidentialityImpact": "PARTIAL",
"integrityImpact": "NONE",
"vectorString": "AV:N/AC:L/Au:N/C:P/I:N/A:N",
"version": "2.0"
},
"exploitabilityScore": 10.0,
"impactScore": 2.9,
"obtainAllPrivilege": false,
"obtainOtherPrivilege": false,
"obtainUserPrivilege": false,
"severity": "MEDIUM",
"userInteractionRequired": false
},
"baseMetricV3": {
"cvssV3": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.0"
},
"exploitabilityScore": 3.9,
"impactScore": 5.9
}
},
"lastModifiedDate": "2019-07-11T02:29Z",
"publishedDate": "2019-07-03T20:15Z"
}
}
}
Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline
Sightings and recorded dates, grouped by day · UTC
How durations are calculated
Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.
Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.
Loading timeline…
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.