GHSA-MRRP-9GJM-749V

Vulnerability from github – Published: 2026-07-06 09:30 – Updated: 2026-08-28 19:32
VLAI
Summary
Apache Camel-CXF: The SOAP operation-selection headers used non-Camel-prefixed names (operationName, operationNamespace) that bypass the HTTP header filter, allowing an HTTP client to redirect the invoked SOAP operation
Details

Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel CXF SOAP component.

The camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATION_NAME / OPERATION_NAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route.

Show details on source website

{
  "affected": [
    {
      "package": {
        "ecosystem": "Maven",
        "name": "org.apache.camel:camel-cxf-soap"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "4.0.0"
            },
            {
              "fixed": "4.14.8"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "Maven",
        "name": "org.apache.camel:camel-cxf-soap"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "4.15.0"
            },
            {
              "fixed": "4.18.3"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "Maven",
        "name": "org.apache.camel:camel-cxf-soap"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "4.19.0"
            },
            {
              "fixed": "4.21.0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "Maven",
        "name": "org.apache.camel:camel-cxf-rest"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "4.0.0"
            },
            {
              "fixed": "4.14.8"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "Maven",
        "name": "org.apache.camel:camel-cxf-rest"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "4.15.0"
            },
            {
              "fixed": "4.18.3"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "Maven",
        "name": "org.apache.camel:camel-cxf-rest"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "4.19.0"
            },
            {
              "fixed": "4.21.0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    }
  ],
  "aliases": [
    "CVE-2026-46592"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-20",
      "CWE-441"
    ],
    "github_reviewed": true,
    "github_reviewed_at": "2026-08-28T19:32:19Z",
    "nvd_published_at": "2026-07-06T09:16:37Z",
    "severity": "HIGH"
  },
  "details": "Improper Input Validation, Unintended Proxy or Intermediary (\u0027Confused Deputy\u0027) vulnerability in Apache Camel CXF SOAP component.\n\nThe camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATION_NAME / OPERATION_NAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated.\nThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route.",
  "id": "GHSA-mrrp-9gjm-749v",
  "modified": "2026-08-28T19:32:19Z",
  "published": "2026-07-06T09:30:29Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-46592"
    },
    {
      "type": "WEB",
      "url": "https://github.com/apache/camel/pull/23326"
    },
    {
      "type": "WEB",
      "url": "https://github.com/apache/camel/pull/23369"
    },
    {
      "type": "WEB",
      "url": "https://github.com/apache/camel/pull/23376"
    },
    {
      "type": "WEB",
      "url": "https://github.com/apache/camel/commit/0138da45fc9428172c1585ab4561d42e8868cf49"
    },
    {
      "type": "WEB",
      "url": "https://github.com/apache/camel/commit/36a5088b58be38317a8f974ffda2a262fa00b4e4"
    },
    {
      "type": "WEB",
      "url": "https://github.com/apache/camel/commit/7240570a05687792c95badfa8d11ed2644117230"
    },
    {
      "type": "WEB",
      "url": "https://camel.apache.org/security/CVE-2026-46592.html"
    },
    {
      "type": "PACKAGE",
      "url": "https://github.com/apache/camel"
    },
    {
      "type": "WEB",
      "url": "https://github.com/apache/camel/releases/tag/camel-4.14.8"
    },
    {
      "type": "WEB",
      "url": "https://github.com/apache/camel/releases/tag/camel-4.18.3"
    },
    {
      "type": "WEB",
      "url": "https://github.com/apache/camel/releases/tag/camel-4.21.0"
    },
    {
      "type": "WEB",
      "url": "https://issues.apache.org/jira/browse/CAMEL-23526"
    },
    {
      "type": "WEB",
      "url": "http://www.openwall.com/lists/oss-security/2026/07/05/15"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N",
      "type": "CVSS_V3"
    }
  ],
  "summary": "Apache Camel-CXF: The SOAP operation-selection headers used non-Camel-prefixed names (operationName, operationNamespace) that bypass the HTTP header filter, allowing an HTTP client to redirect the invoked SOAP operation"
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.