GHSA-MMV8-63HV-MHRH
Vulnerability from github – Published: 2025-05-01 15:31 – Updated: 2025-11-07 00:30In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix an out-of-bounds shift when invalidating TLB
When the size of the range invalidated is larger than rounddown_pow_of_two(ULONG_MAX), The function macro roundup_pow_of_two(length) will hit an out-of-bounds shift [1].
Use a full TLB invalidation for such cases. v2: - Use a define for the range size limit over which we use a full TLB invalidation. (Lucas) - Use a better calculation of the limit.
[1]: [ 39.202421] ------------[ cut here ]------------ [ 39.202657] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 [ 39.202673] shift exponent 64 is too large for 64-bit type 'long unsigned int' [ 39.202688] CPU: 8 UID: 0 PID: 3129 Comm: xe_exec_system_ Tainted: G U 6.14.0+ #10 [ 39.202690] Tainted: [U]=USER [ 39.202690] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023 [ 39.202691] Call Trace: [ 39.202692] [ 39.202695] dump_stack_lvl+0x6e/0xa0 [ 39.202699] ubsan_epilogue+0x5/0x30 [ 39.202701] __ubsan_handle_shift_out_of_bounds.cold+0x61/0xe6 [ 39.202705] xe_gt_tlb_invalidation_range.cold+0x1d/0x3a [xe] [ 39.202800] ? find_held_lock+0x2b/0x80 [ 39.202803] ? mark_held_locks+0x40/0x70 [ 39.202806] xe_svm_invalidate+0x459/0x700 [xe] [ 39.202897] drm_gpusvm_notifier_invalidate+0x4d/0x70 [drm_gpusvm] [ 39.202900] __mmu_notifier_release+0x1f5/0x270 [ 39.202905] exit_mmap+0x40e/0x450 [ 39.202912] __mmput+0x45/0x110 [ 39.202914] exit_mm+0xc5/0x130 [ 39.202916] do_exit+0x21c/0x500 [ 39.202918] ? lockdep_hardirqs_on_prepare+0xdb/0x190 [ 39.202920] do_group_exit+0x36/0xa0 [ 39.202922] get_signal+0x8f8/0x900 [ 39.202926] arch_do_signal_or_restart+0x35/0x100 [ 39.202930] syscall_exit_to_user_mode+0x1fc/0x290 [ 39.202932] do_syscall_64+0xa1/0x180 [ 39.202934] ? do_user_addr_fault+0x59f/0x8a0 [ 39.202937] ? lock_release+0xd2/0x2a0 [ 39.202939] ? do_user_addr_fault+0x5a9/0x8a0 [ 39.202942] ? trace_hardirqs_off+0x4b/0xc0 [ 39.202944] ? clear_bhb_loop+0x25/0x80 [ 39.202946] ? clear_bhb_loop+0x25/0x80 [ 39.202947] ? clear_bhb_loop+0x25/0x80 [ 39.202950] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 39.202952] RIP: 0033:0x7fa945e543e1 [ 39.202961] Code: Unable to access opcode bytes at 0x7fa945e543b7. [ 39.202962] RSP: 002b:00007ffca8fb4170 EFLAGS: 00000293 [ 39.202963] RAX: 000000000000003d RBX: 0000000000000000 RCX: 00007fa945e543e3 [ 39.202964] RDX: 0000000000000000 RSI: 00007ffca8fb41ac RDI: 00000000ffffffff [ 39.202964] RBP: 00007ffca8fb4190 R08: 0000000000000000 R09: 00007fa945f600a0 [ 39.202965] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 [ 39.202966] R13: 00007fa9460dd310 R14: 00007ffca8fb41ac R15: 0000000000000000 [ 39.202970] [ 39.202970] ---[ end trace ]---
(cherry picked from commit b88f48f86500bc0b44b4f73ac66d500a40d320ad)
{
"affected": [],
"aliases": [
"CVE-2025-37761"
],
"database_specific": {
"cwe_ids": [
"CWE-125"
],
"github_reviewed": false,
"github_reviewed_at": null,
"nvd_published_at": "2025-05-01T14:15:38Z",
"severity": "HIGH"
},
"details": "In the Linux kernel, the following vulnerability has been resolved:\n\ndrm/xe: Fix an out-of-bounds shift when invalidating TLB\n\nWhen the size of the range invalidated is larger than\nrounddown_pow_of_two(ULONG_MAX),\nThe function macro roundup_pow_of_two(length) will hit an out-of-bounds\nshift [1].\n\nUse a full TLB invalidation for such cases.\nv2:\n- Use a define for the range size limit over which we use a full\n TLB invalidation. (Lucas)\n- Use a better calculation of the limit.\n\n[1]:\n[ 39.202421] ------------[ cut here ]------------\n[ 39.202657] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13\n[ 39.202673] shift exponent 64 is too large for 64-bit type \u0027long unsigned int\u0027\n[ 39.202688] CPU: 8 UID: 0 PID: 3129 Comm: xe_exec_system_ Tainted: G U 6.14.0+ #10\n[ 39.202690] Tainted: [U]=USER\n[ 39.202690] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023\n[ 39.202691] Call Trace:\n[ 39.202692] \u003cTASK\u003e\n[ 39.202695] dump_stack_lvl+0x6e/0xa0\n[ 39.202699] ubsan_epilogue+0x5/0x30\n[ 39.202701] __ubsan_handle_shift_out_of_bounds.cold+0x61/0xe6\n[ 39.202705] xe_gt_tlb_invalidation_range.cold+0x1d/0x3a [xe]\n[ 39.202800] ? find_held_lock+0x2b/0x80\n[ 39.202803] ? mark_held_locks+0x40/0x70\n[ 39.202806] xe_svm_invalidate+0x459/0x700 [xe]\n[ 39.202897] drm_gpusvm_notifier_invalidate+0x4d/0x70 [drm_gpusvm]\n[ 39.202900] __mmu_notifier_release+0x1f5/0x270\n[ 39.202905] exit_mmap+0x40e/0x450\n[ 39.202912] __mmput+0x45/0x110\n[ 39.202914] exit_mm+0xc5/0x130\n[ 39.202916] do_exit+0x21c/0x500\n[ 39.202918] ? lockdep_hardirqs_on_prepare+0xdb/0x190\n[ 39.202920] do_group_exit+0x36/0xa0\n[ 39.202922] get_signal+0x8f8/0x900\n[ 39.202926] arch_do_signal_or_restart+0x35/0x100\n[ 39.202930] syscall_exit_to_user_mode+0x1fc/0x290\n[ 39.202932] do_syscall_64+0xa1/0x180\n[ 39.202934] ? do_user_addr_fault+0x59f/0x8a0\n[ 39.202937] ? lock_release+0xd2/0x2a0\n[ 39.202939] ? do_user_addr_fault+0x5a9/0x8a0\n[ 39.202942] ? trace_hardirqs_off+0x4b/0xc0\n[ 39.202944] ? clear_bhb_loop+0x25/0x80\n[ 39.202946] ? clear_bhb_loop+0x25/0x80\n[ 39.202947] ? clear_bhb_loop+0x25/0x80\n[ 39.202950] entry_SYSCALL_64_after_hwframe+0x76/0x7e\n[ 39.202952] RIP: 0033:0x7fa945e543e1\n[ 39.202961] Code: Unable to access opcode bytes at 0x7fa945e543b7.\n[ 39.202962] RSP: 002b:00007ffca8fb4170 EFLAGS: 00000293\n[ 39.202963] RAX: 000000000000003d RBX: 0000000000000000 RCX: 00007fa945e543e3\n[ 39.202964] RDX: 0000000000000000 RSI: 00007ffca8fb41ac RDI: 00000000ffffffff\n[ 39.202964] RBP: 00007ffca8fb4190 R08: 0000000000000000 R09: 00007fa945f600a0\n[ 39.202965] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000\n[ 39.202966] R13: 00007fa9460dd310 R14: 00007ffca8fb41ac R15: 0000000000000000\n[ 39.202970] \u003c/TASK\u003e\n[ 39.202970] ---[ end trace ]---\n\n(cherry picked from commit b88f48f86500bc0b44b4f73ac66d500a40d320ad)",
"id": "GHSA-mmv8-63hv-mhrh",
"modified": "2025-11-07T00:30:26Z",
"published": "2025-05-01T15:31:43Z",
"references": [
{
"type": "ADVISORY",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2025-37761"
},
{
"type": "WEB",
"url": "https://git.kernel.org/stable/c/28477f701b63922ff88e9fb13f5519c11cd48b86"
},
{
"type": "WEB",
"url": "https://git.kernel.org/stable/c/7bcfeddb36b77f9fe3b010bb0b282b7618420bba"
},
{
"type": "WEB",
"url": "https://git.kernel.org/stable/c/e4715858f87b78ce58cfa03bbe140321edbbaf20"
}
],
"schema_version": "1.4.0",
"severity": [
{
"score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H",
"type": "CVSS_V3"
}
]
}
Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline
Sightings and recorded dates, grouped by day · UTC
How durations are calculated
Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.
Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.
Loading timeline…
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.