GHSA-JRG6-QWP6-F549

Vulnerability from github – Published: 2026-01-31 12:30 – Updated: 2026-03-25 21:30
VLAI
Details

In the Linux kernel, the following vulnerability has been resolved:

btrfs: always detect conflicting inodes when logging inode refs

After rename exchanging (either with the rename exchange operation or regular renames in multiple non-atomic steps) two inodes and at least one of them is a directory, we can end up with a log tree that contains only of the inodes and after a power failure that can result in an attempt to delete the other inode when it should not because it was not deleted before the power failure. In some case that delete attempt fails when the target inode is a directory that contains a subvolume inside it, since the log replay code is not prepared to deal with directory entries that point to root items (only inode items).

1) We have directories "dir1" (inode A) and "dir2" (inode B) under the same parent directory;

2) We have a file (inode C) under directory "dir1" (inode A);

3) We have a subvolume inside directory "dir2" (inode B);

4) All these inodes were persisted in a past transaction and we are currently at transaction N;

5) We rename the file (inode C), so at btrfs_log_new_name() we update inode C's last_unlink_trans to N;

6) We get a rename exchange for "dir1" (inode A) and "dir2" (inode B), so after the exchange "dir1" is inode B and "dir2" is inode A. During the rename exchange we call btrfs_log_new_name() for inodes A and B, but because they are directories, we don't update their last_unlink_trans to N;

7) An fsync against the file (inode C) is done, and because its inode has a last_unlink_trans with a value of N we log its parent directory (inode A) (through btrfs_log_all_parents(), called from btrfs_log_inode_parent()).

8) So we end up with inode B not logged, which now has the old name of inode A. At copy_inode_items_to_log(), when logging inode A, we did not check if we had any conflicting inode to log because inode A has a generation lower than the current transaction (created in a past transaction);

9) After a power failure, when replaying the log tree, since we find that inode A has a new name that conflicts with the name of inode B in the fs tree, we attempt to delete inode B... this is wrong since that directory was never deleted before the power failure, and because there is a subvolume inside that directory, attempting to delete it will fail since replay_dir_deletes() and btrfs_unlink_inode() are not prepared to deal with dir items that point to roots instead of inodes.

When that happens the mount fails and we get a stack trace like the following:

[87.2314] BTRFS info (device dm-0): start tree-log replay [87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259 [87.2332] ------------[ cut here ]------------ [87.2338] BTRFS: Transaction aborted (error -2) [87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs] [87.2368] Modules linked in: btrfs loop dm_thin_pool (...) [87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G W 6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full) [87.2489] Tainted: [W]=WARN [87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs] [87.2538] Code: c0 89 04 24 (...) [87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286 [87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000 [87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff [87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840 [87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0 [87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10 [87.2618] FS: 00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000 [87. ---truncated---

Show details on source website

{
  "affected": [],
  "aliases": [
    "CVE-2025-71183"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-362"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2026-01-31T12:16:03Z",
    "severity": "MODERATE"
  },
  "details": "In the Linux kernel, the following vulnerability has been resolved:\n\nbtrfs: always detect conflicting inodes when logging inode refs\n\nAfter rename exchanging (either with the rename exchange operation or\nregular renames in multiple non-atomic steps) two inodes and at least\none of them is a directory, we can end up with a log tree that contains\nonly of the inodes and after a power failure that can result in an attempt\nto delete the other inode when it should not because it was not deleted\nbefore the power failure. In some case that delete attempt fails when\nthe target inode is a directory that contains a subvolume inside it, since\nthe log replay code is not prepared to deal with directory entries that\npoint to root items (only inode items).\n\n1) We have directories \"dir1\" (inode A) and \"dir2\" (inode B) under the\n   same parent directory;\n\n2) We have a file (inode C) under directory \"dir1\" (inode A);\n\n3) We have a subvolume inside directory \"dir2\" (inode B);\n\n4) All these inodes were persisted in a past transaction and we are\n   currently at transaction N;\n\n5) We rename the file (inode C), so at btrfs_log_new_name() we update\n   inode C\u0027s last_unlink_trans to N;\n\n6) We get a rename exchange for \"dir1\" (inode A) and \"dir2\" (inode B),\n   so after the exchange \"dir1\" is inode B and \"dir2\" is inode A.\n   During the rename exchange we call btrfs_log_new_name() for inodes\n   A and B, but because they are directories, we don\u0027t update their\n   last_unlink_trans to N;\n\n7) An fsync against the file (inode C) is done, and because its inode\n   has a last_unlink_trans with a value of N we log its parent directory\n   (inode A) (through btrfs_log_all_parents(), called from\n   btrfs_log_inode_parent()).\n\n8) So we end up with inode B not logged, which now has the old name\n   of inode A. At copy_inode_items_to_log(), when logging inode A, we\n   did not check if we had any conflicting inode to log because inode\n   A has a generation lower than the current transaction (created in\n   a past transaction);\n\n9) After a power failure, when replaying the log tree, since we find that\n   inode A has a new name that conflicts with the name of inode B in the\n   fs tree, we attempt to delete inode B... this is wrong since that\n   directory was never deleted before the power failure, and because there\n   is a subvolume inside that directory, attempting to delete it will fail\n   since replay_dir_deletes() and btrfs_unlink_inode() are not prepared\n   to deal with dir items that point to roots instead of inodes.\n\n   When that happens the mount fails and we get a stack trace like the\n   following:\n\n   [87.2314] BTRFS info (device dm-0): start tree-log replay\n   [87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259\n   [87.2332] ------------[ cut here ]------------\n   [87.2338] BTRFS: Transaction aborted (error -2)\n   [87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs]\n   [87.2368] Modules linked in: btrfs loop dm_thin_pool (...)\n   [87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G        W           6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full)\n   [87.2489] Tainted: [W]=WARN\n   [87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014\n   [87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs]\n   [87.2538] Code: c0 89 04 24 (...)\n   [87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286\n   [87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000\n   [87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff\n   [87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840\n   [87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0\n   [87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10\n   [87.2618] FS:  00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000\n   [87.\n---truncated---",
  "id": "GHSA-jrg6-qwp6-f549",
  "modified": "2026-03-25T21:30:24Z",
  "published": "2026-01-31T12:30:11Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2025-71183"
    },
    {
      "type": "WEB",
      "url": "https://git.kernel.org/stable/c/0c2413c69129f6ce60157f7b53d9ba880260400b"
    },
    {
      "type": "WEB",
      "url": "https://git.kernel.org/stable/c/7ba0b6461bc4edb3005ea6e00cdae189bcf908a5"
    },
    {
      "type": "WEB",
      "url": "https://git.kernel.org/stable/c/a63998cd6687c14b160dccb0bbcf281b2eb0dab3"
    },
    {
      "type": "WEB",
      "url": "https://git.kernel.org/stable/c/c7f0207db68d5a1b4af23acbef1a8e8ddc431ebb"
    },
    {
      "type": "WEB",
      "url": "https://git.kernel.org/stable/c/d52af58dd463821c5c516aebb031a58934f696ea"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ]
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.