GHSA-9GHH-MMCQ-8PHC
Vulnerability from github – Published: 2024-06-17 22:30 – Updated: 2024-10-16 19:26Impact
A vulnerability has been identified in which Rancher does not automatically clean up a user which has been deleted from the configured authentication provider (AP). This characteristic also applies to disabled or revoked users, Rancher will not reflect these modifications which may leave the user’s tokens still usable.
An AP must be enabled to be affected by this, as the built-in User Management feature is not affected by this vulnerability. This issue may lead to an adversary gaining unauthorized access, as the user’s access privileges may still be active within Rancher even though they are no longer valid on the configured AP (please consult the MITRE ATT&CK - Technique - Valid Accounts for further information about the associated technique of attack).
It’s important to note that all configurable APs are impacted, see Rancher Docs - Configuring Authentication - External vs. Local Authentication to get the full authentication providers list.
To address this issue, the fix introduces a new user retention process that can be configured to run periodically and disable and/or delete inactive users. If enabled a user becomes subject to retention if they don't login for a configurable period of time. It's possible to set overrides for users that are used mainly for programmatic access (e.g. CI, scripts etc.) so that they don't become subject to retention for a longer period of time or at all. The user retention process is disabled by default, to avoid deleting wrong accounts. It is up to each user to enable it and configure the retention period as it best suits its environment.
Be aware that once the process is enabled, it might take a few days for previous users that have been revoked or deleted from the AP to be automatically removed from Rancher. To attenuate the risk of this condition, we recommend to regularly audit the AP’s user accounts for activity and manually deactivate or remove them from Rancher, if they are no longer needed.
For further information about the user retention process configuration, please refer to the dedicated documentation Rancher Docs - Advanced User Guides - Enable User Retention.
Patches
Patched versions include releases 2.7.14 and 2.8.5.
Workarounds
Administrators that are unable to update to a patched Rancher Manager version, are advised to delete Rancher users, via kubectl or through the UI, as soon as those users are deleted from the Authentication Provider. If a user needs to be temporarily disabled on the Authentication Provider, similar intervention will need to take place to reflect that change on Rancher Manager.
Below is a procedure to list and remove a deleted/disabled user in Rancher using kubectl (with a privileged kubeconfig).
- List all users bound to a supported external auth provider, then returns
username,uid,displayNameandPrincipalIdswhich contains the relatedauthprovider_user://ID
#!/bin/bash
for authprovider in {activedirectory,azure,common,genericoidc,github googleauth, keycloakoidc,ldap,oidc,publicapi,saml}
do
kubectl get users -o json | jq --arg authprovider "$authprovider" '.items[] | select(.principalIds[] | test("^" + $authprovider + "_user://")) | {username: .metadata.name, uid: .metadata.uid, displayName: .displayName, principalIds: .principalIds}'
done
- Once the
authprovider_user://ID(and/orDisplayName) is confirmed, remove the user from the Rancher UI or usingkubectl delete users <USERNAME>.
For more information
If you have any questions or comments about this advisory:
- Reach out to the SUSE Rancher Security team for security related inquiries.
- Open an issue in the Rancher repository.
- Verify with our support matrix and product support lifecycle.
{
"affected": [
{
"package": {
"ecosystem": "Go",
"name": "github.com/rancher/rancher"
},
"ranges": [
{
"events": [
{
"introduced": "2.7.0"
},
{
"fixed": "2.7.14"
}
],
"type": "ECOSYSTEM"
}
]
},
{
"package": {
"ecosystem": "Go",
"name": "github.com/rancher/rancher"
},
"ranges": [
{
"events": [
{
"introduced": "2.8.0"
},
{
"fixed": "2.8.5"
}
],
"type": "ECOSYSTEM"
}
]
}
],
"aliases": [
"CVE-2023-22650"
],
"database_specific": {
"cwe_ids": [
"CWE-287",
"CWE-306",
"CWE-613"
],
"github_reviewed": true,
"github_reviewed_at": "2024-06-17T22:30:46Z",
"nvd_published_at": "2024-10-16T09:15:02Z",
"severity": "HIGH"
},
"details": "### Impact\n\nA vulnerability has been identified in which Rancher does not automatically clean up a user which has been deleted from the configured authentication provider (AP). This characteristic also applies to disabled or revoked users, Rancher will not reflect these modifications which may leave the user\u2019s tokens still usable.\n\nAn AP must be enabled to be affected by this, as the built-in User Management feature is not affected by this vulnerability.\nThis issue may lead to an adversary gaining unauthorized access, as the user\u2019s access privileges may still be active within Rancher even though they are no longer valid on the configured AP (please consult the [MITRE ATT\u0026CK - Technique - Valid Accounts](https://attack.mitre.org/techniques/T1078/) for further information about the associated technique of attack).\n\nIt\u2019s important to note that all configurable APs are impacted, see [Rancher Docs - Configuring Authentication - External vs. Local Authentication](https://ranchermanager.docs.rancher.com/how-to-guides/new-user-guides/authentication-permissions-and-global-configuration/authentication-config#external-vs-local-authentication) to get the full authentication providers list.\n\n\nTo address this issue, the fix introduces a new user retention process that can be configured to run periodically and disable and/or delete inactive users. If enabled a user becomes subject to retention if they don\u0027t login for a configurable period of time. It\u0027s possible to set overrides for users that are used mainly for programmatic access (e.g. CI, scripts etc.) so that they don\u0027t become subject to retention for a longer period of time or at all. The user retention process is disabled by default, to avoid deleting wrong accounts. It is up to each user to enable it and configure the retention period as it best suits its environment.\n\nBe aware that once the process is enabled, it might take a few days for previous users that have been revoked or deleted from the AP to be automatically removed from Rancher. To attenuate the risk of this condition, we recommend to regularly audit the AP\u2019s user accounts for activity and manually deactivate or remove them from Rancher, if they are no longer needed.\n\nFor further information about the user retention process configuration, please refer to the dedicated documentation [Rancher Docs - Advanced User Guides - Enable User Retention](https://ranchermanager.docs.rancher.com/how-to-guides/advanced-user-guides/enable-user-retention).\n\n### Patches\n\nPatched versions include releases `2.7.14` and `2.8.5`.\n\n### Workarounds\n\nAdministrators that are unable to update to a patched Rancher Manager version, are advised to delete Rancher users, via kubectl or through the UI, as soon as those users are deleted from the Authentication Provider. If a user needs to be temporarily disabled on the Authentication Provider, similar intervention will need to take place to reflect that change on Rancher Manager.\n\n\nBelow is a procedure to list and remove a deleted/disabled user in Rancher using `kubectl` (with a privileged kubeconfig).\n\n1. List all users bound to a supported external auth provider, then returns `username`, `uid`, `displayName` and `PrincipalIds` which contains the related `authprovider_user://ID`\n\n```shell\n#!/bin/bash\n\nfor authprovider in {activedirectory,azure,common,genericoidc,github googleauth, keycloakoidc,ldap,oidc,publicapi,saml}\ndo \n\tkubectl get users -o json | jq --arg authprovider \"$authprovider\" \u0027.items[] | select(.principalIds[] | test(\"^\" + $authprovider + \"_user://\")) | {username: .metadata.name, uid: .metadata.uid, displayName: .displayName, principalIds: .principalIds}\u0027\ndone\n```\n\n2. Once the `authprovider_user://ID` (and/or `DisplayName`) is confirmed, remove the user from the Rancher UI or using `kubectl delete users \u003cUSERNAME\u003e`.\n\n\n### For more information\n\nIf you have any questions or comments about this advisory:\n\n- Reach out to the [SUSE Rancher Security team](https://github.com/rancher/rancher/security/policy) for security related inquiries.\n- Open an issue in the [Rancher](https://github.com/rancher/rancher/issues/new/choose) repository.\n- Verify with our [support matrix](https://www.suse.com/suse-rancher/support-matrix/all-supported-versions/) and [product support lifecycle](https://www.suse.com/lifecycle/).\n",
"id": "GHSA-9ghh-mmcq-8phc",
"modified": "2024-10-16T19:26:09Z",
"published": "2024-06-17T22:30:46Z",
"references": [
{
"type": "WEB",
"url": "https://github.com/rancher/rancher/security/advisories/GHSA-9ghh-mmcq-8phc"
},
{
"type": "ADVISORY",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2023-22650"
},
{
"type": "WEB",
"url": "https://bugzilla.suse.com/show_bug.cgi?id=CVE-2023-22650"
},
{
"type": "PACKAGE",
"url": "https://github.com/rancher/rancher"
}
],
"schema_version": "1.4.0",
"severity": [
{
"score": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"type": "CVSS_V3"
},
{
"score": "CVSS:4.0/AV:N/AC:L/AT:N/PR:L/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N",
"type": "CVSS_V4"
}
],
"summary": "Rancher does not automatically clean up a user deleted or disabled from the configured Authentication Provider"
}
Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline
Sightings and recorded dates, grouped by day · UTC
How durations are calculated
Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.
Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.
Loading timeline…
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.