GHSA-5H36-FQXX-FJPH

Vulnerability from github – Published: 2026-11-02 00:30 – Updated: 2026-11-02 00:30
VLAI
Details

Insufficient session expiration in Apache Wicket.

org.apache.wicket.protocol.ws.WebSocketSettings#newWebSocketRequest() wraps the WebSocket upgrade request in an org.apache.wicket.protocol.ws.api.ServletRequestCopy, which is kept for the life of the connection and used to build the request for every frame that arrives on it. Copying the request is deliberate and is documented as such, because the container recycles the upgrade request once the handshake is over. The container session is copied along with it, into an org.apache.wicket.protocol.ws.api.HttpSessionCopy holding the session attributes as they stood when the connection was opened. That second copy is not necessary, because a session, unlike a request, is not discarded at the end of a request. Every frame afterwards resolves its Wicket session through ISessionStore#lookup(), which reads it out of the copy, so the connection is detached from the live container session for as long as it stays open.

Ending the session through the container therefore does not end the connection. After an idle timeout, an HttpSession#invalidate() call made from a filter or from a security framework, a container-managed logout, or a session replacement, the connection goes on resolving the org.apache.wicket.Session instance that existed when it was opened, together with that session's attributes and, for applications built on wicket-auth-roles, the signed-in state held on that same instance, so an authorization decision taken inside a WebSocket callback is taken against an identity that has already been revoked. The copy is also what the connection writes through: a Session#invalidateNow() issued from inside a WebSocket callback invalidates the copy and leaves the container session valid, and session attributes set over the connection are written to the copy rather than to the session.

An application is affected where it uses Wicket's native WebSocket support on pages or shared resources that require an authenticated session, and where sessions are ended by the container rather than by Wicket. Session#invalidateNow(), and AuthenticatedWebSession#invalidate() and #signOut() which call it, remain effective for a WebSocketBehavior on a page: they clear the page manager, and the connection can then no longer resolve the page it was opened for. A WebSocketResource is not limited in that way, because a frame naming a resource is served against a throwaway page and never consults the page manager, so such a connection outlives Wicket's own sign-out as well. Some containers close WebSocket connections themselves when the HTTP session they were opened under is destroyed, in which case the connection ends regardless; that is a property of the container rather than of Wicket. Applications that do not use the native WebSocket support are not affected.

This issue affects Apache Wicket: from 8.0.0 through 8.19.0, from 9.0.0 through 9.24.0, from 10.0.0 through 10.11.0. Older, unsupported releases from 6.0.0 onwards are also affected. Users are recommended to upgrade to version 8.20.0, 9.25.0 or 10.12.0, which fix the issue.

Show details on source website

{
  "affected": [],
  "aliases": [
    "CVE-2026-82559"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-613"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2026-11-01T22:17:47Z",
    "severity": "LOW"
  },
  "details": "Insufficient session expiration in Apache Wicket.\n\norg.apache.wicket.protocol.ws.WebSocketSettings#newWebSocketRequest() wraps the WebSocket upgrade request in an org.apache.wicket.protocol.ws.api.ServletRequestCopy, which is kept for the life of the connection and used to build the request for every frame that arrives on it. Copying the request is deliberate and is documented as such, because the container recycles the upgrade request once the handshake is over. The container session is copied along with it, into an org.apache.wicket.protocol.ws.api.HttpSessionCopy holding the session attributes as they stood when the connection was opened. That second copy is not necessary, because a session, unlike a request, is not discarded at the end of a request. Every frame afterwards resolves its Wicket session through ISessionStore#lookup(), which reads it out of the copy, so the connection is detached from the live container session for as long as it stays open.\n\nEnding the session through the container therefore does not end the connection. After an idle timeout, an HttpSession#invalidate() call made from a filter or from a security framework, a container-managed logout, or a session replacement, the connection goes on resolving the org.apache.wicket.Session instance that existed when it was opened, together with that session\u0027s attributes and, for applications built on wicket-auth-roles, the signed-in state held on that same instance, so an authorization decision taken inside a WebSocket callback is taken against an identity that has already been revoked. The copy is also what the connection writes through: a Session#invalidateNow() issued from inside a WebSocket callback invalidates the copy and leaves the container session valid, and session attributes set over the connection are written to the copy rather than to the session.\n\nAn application is affected where it uses Wicket\u0027s native WebSocket support on pages or shared resources that require an authenticated session, and where sessions are ended by the container rather than by Wicket. Session#invalidateNow(), and AuthenticatedWebSession#invalidate() and #signOut() which call it, remain effective for a WebSocketBehavior on a page: they clear the page manager, and the connection can then no longer resolve the page it was opened for. A WebSocketResource is not limited in that way, because a frame naming a resource is served against a throwaway page and never consults the page manager, so such a connection outlives Wicket\u0027s own sign-out as well. Some containers close WebSocket connections themselves when the HTTP session they were opened under is destroyed, in which case the connection ends regardless; that is a property of the container rather than of Wicket. Applications that do not use the native WebSocket support are not affected.\n\nThis issue affects Apache Wicket: from 8.0.0 through 8.19.0, from 9.0.0 through 9.24.0, from 10.0.0 through 10.11.0. Older, unsupported releases from 6.0.0 onwards are also affected. Users are recommended to upgrade to version 8.20.0, 9.25.0 or 10.12.0, which fix the issue.",
  "id": "GHSA-5h36-fqxx-fjph",
  "modified": "2026-11-02T00:30:26Z",
  "published": "2026-11-02T00:30:26Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-82559"
    },
    {
      "type": "WEB",
      "url": "https://lists.apache.org/thread.html/5vkw9wz6gf135ccosj928zjs4hqy7bcv"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:4.0/AV:N/AC:L/AT:P/PR:L/UI:N/VC:L/VI:L/VA:N/SC:N/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X",
      "type": "CVSS_V4"
    }
  ]
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.