GHSA-3J4Q-R565-VCJ9
Vulnerability from github – Published: 2025-10-21 12:31 – Updated: 2025-10-21 12:31In the Linux kernel, the following vulnerability has been resolved:
block: fix rq-qos breakage from skipping rq_qos_done_bio()
a647a524a467 ("block: don't call rq_qos_ops->done_bio if the bio isn't tracked") made bio_endio() skip rq_qos_done_bio() if BIO_TRACKED is not set. While this fixed a potential oops, it also broke blk-iocost by skipping the done_bio callback for merged bios.
Before, whether a bio goes through rq_qos_throttle() or rq_qos_merge(), rq_qos_done_bio() would be called on the bio on completion with BIO_TRACKED distinguishing the former from the latter. rq_qos_done_bio() is not called for bios which wenth through rq_qos_merge(). This royally confuses blk-iocost as the merged bios never finish and are considered perpetually in-flight.
One reliably reproducible failure mode is an intermediate cgroup geting stuck active preventing its children from being activated due to the leaf-only rule, leading to loss of control. The following is from resctl-bench protection scenario which emulates isolating a web server like workload from a memory bomb run on an iocost configuration which should yield a reasonable level of protection.
# cat /sys/block/nvme2n1/device/model Samsung SSD 970 PRO 512GB # cat /sys/fs/cgroup/io.cost.model 259:0 ctrl=user model=linear rbps=834913556 rseqiops=93622 rrandiops=102913 wbps=618985353 wseqiops=72325 wrandiops=71025 # cat /sys/fs/cgroup/io.cost.qos 259:0 enable=1 ctrl=user rpct=95.00 rlat=18776 wpct=95.00 wlat=8897 min=60.00 max=100.00 # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1 ... Memory Hog Summary ==================
IO Latency: R p50=242u:336u/2.5m p90=794u:1.4m/7.5m p99=2.7m:8.0m/62.5m max=8.0m:36.4m/350m W p50=221u:323u/1.5m p90=709u:1.2m/5.5m p99=1.5m:2.5m/9.5m max=6.9m:35.9m/350m
Isolation and Request Latency Impact Distributions:
min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev
isol% 15.90 15.90 15.90 40.05 57.24 59.07 60.01 74.63 74.63 90.35 90.35 58.12 15.82 lat-imp% 0 0 0 0 0 4.55 14.68 15.54 233.5 548.1 548.1 53.88 143.6
Result: isol=58.12:15.82% lat_imp=53.88%:143.6 work_csv=100.0% missing=3.96%
The isolation result of 58.12% is close to what this device would show without any IO control.
Fix it by introducing a new flag BIO_QOS_MERGED to mark merged bios and calling rq_qos_done_bio() on them too. For consistency and clarity, rename BIO_TRACKED to BIO_QOS_THROTTLED. The flag checks are moved into rq_qos_done_bio() so that it's next to the code paths that set the flags.
With the patch applied, the above same benchmark shows:
# resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1 ... Memory Hog Summary ==================
IO Latency: R p50=123u:84.4u/985u p90=322u:256u/2.5m p99=1.6m:1.4m/9.5m max=11.1m:36.0m/350m W p50=429u:274u/995u p90=1.7m:1.3m/4.5m p99=3.4m:2.7m/11.5m max=7.9m:5.9m/26.5m
Isolation and Request Latency Impact Distributions:
min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev
isol% 84.91 84.91 89.51 90.73 92.31 94.49 96.36 98.04 98.71 100.0 100.0 94.42 2.81 lat-imp% 0 0 0 0 0 2.81 5.73 11.11 13.92 17.53 22.61 4.10 4.68
Result: isol=94.42:2.81% lat_imp=4.10%:4.68 work_csv=58.34% missing=0%
{
"affected": [],
"aliases": [
"CVE-2022-49266"
],
"database_specific": {
"cwe_ids": [],
"github_reviewed": false,
"github_reviewed_at": null,
"nvd_published_at": "2025-02-26T07:01:03Z",
"severity": "MODERATE"
},
"details": "In the Linux kernel, the following vulnerability has been resolved:\n\nblock: fix rq-qos breakage from skipping rq_qos_done_bio()\n\na647a524a467 (\"block: don\u0027t call rq_qos_ops-\u003edone_bio if the bio isn\u0027t\ntracked\") made bio_endio() skip rq_qos_done_bio() if BIO_TRACKED is not set.\nWhile this fixed a potential oops, it also broke blk-iocost by skipping the\ndone_bio callback for merged bios.\n\nBefore, whether a bio goes through rq_qos_throttle() or rq_qos_merge(),\nrq_qos_done_bio() would be called on the bio on completion with BIO_TRACKED\ndistinguishing the former from the latter. rq_qos_done_bio() is not called\nfor bios which wenth through rq_qos_merge(). This royally confuses\nblk-iocost as the merged bios never finish and are considered perpetually\nin-flight.\n\nOne reliably reproducible failure mode is an intermediate cgroup geting\nstuck active preventing its children from being activated due to the\nleaf-only rule, leading to loss of control. The following is from\nresctl-bench protection scenario which emulates isolating a web server like\nworkload from a memory bomb run on an iocost configuration which should\nyield a reasonable level of protection.\n\n # cat /sys/block/nvme2n1/device/model\n Samsung SSD 970 PRO 512GB\n # cat /sys/fs/cgroup/io.cost.model\n 259:0 ctrl=user model=linear rbps=834913556 rseqiops=93622 rrandiops=102913 wbps=618985353 wseqiops=72325 wrandiops=71025\n # cat /sys/fs/cgroup/io.cost.qos\n 259:0 enable=1 ctrl=user rpct=95.00 rlat=18776 wpct=95.00 wlat=8897 min=60.00 max=100.00\n # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1\n ...\n Memory Hog Summary\n ==================\n\n IO Latency: R p50=242u:336u/2.5m p90=794u:1.4m/7.5m p99=2.7m:8.0m/62.5m max=8.0m:36.4m/350m\n W p50=221u:323u/1.5m p90=709u:1.2m/5.5m p99=1.5m:2.5m/9.5m max=6.9m:35.9m/350m\n\n Isolation and Request Latency Impact Distributions:\n\n min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev\n isol% 15.90 15.90 15.90 40.05 57.24 59.07 60.01 74.63 74.63 90.35 90.35 58.12 15.82\n lat-imp% 0 0 0 0 0 4.55 14.68 15.54 233.5 548.1 548.1 53.88 143.6\n\n Result: isol=58.12:15.82% lat_imp=53.88%:143.6 work_csv=100.0% missing=3.96%\n\nThe isolation result of 58.12% is close to what this device would show\nwithout any IO control.\n\nFix it by introducing a new flag BIO_QOS_MERGED to mark merged bios and\ncalling rq_qos_done_bio() on them too. For consistency and clarity, rename\nBIO_TRACKED to BIO_QOS_THROTTLED. The flag checks are moved into\nrq_qos_done_bio() so that it\u0027s next to the code paths that set the flags.\n\nWith the patch applied, the above same benchmark shows:\n\n # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1\n ...\n Memory Hog Summary\n ==================\n\n IO Latency: R p50=123u:84.4u/985u p90=322u:256u/2.5m p99=1.6m:1.4m/9.5m max=11.1m:36.0m/350m\n W p50=429u:274u/995u p90=1.7m:1.3m/4.5m p99=3.4m:2.7m/11.5m max=7.9m:5.9m/26.5m\n\n Isolation and Request Latency Impact Distributions:\n\n min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev\n isol% 84.91 84.91 89.51 90.73 92.31 94.49 96.36 98.04 98.71 100.0 100.0 94.42 2.81\n lat-imp% 0 0 0 0 0 2.81 5.73 11.11 13.92 17.53 22.61 4.10 4.68\n\n Result: isol=94.42:2.81% lat_imp=4.10%:4.68 work_csv=58.34% missing=0%",
"id": "GHSA-3j4q-r565-vcj9",
"modified": "2025-10-21T12:31:24Z",
"published": "2025-10-21T12:31:24Z",
"references": [
{
"type": "ADVISORY",
"url": "https://nvd.nist.gov/vuln/detail/CVE-2022-49266"
},
{
"type": "WEB",
"url": "https://git.kernel.org/stable/c/09737db4c891eba25e6f6383a7c38afd4acc883f"
},
{
"type": "WEB",
"url": "https://git.kernel.org/stable/c/aa1b46dcdc7baaf5fec0be25782ef24b26aa209e"
},
{
"type": "WEB",
"url": "https://git.kernel.org/stable/c/af9452dfdba4bf7359ef7645eee2d243a1df0649"
},
{
"type": "WEB",
"url": "https://git.kernel.org/stable/c/dbd20bb904ad5731aaca8d009367a930d6ada111"
}
],
"schema_version": "1.4.0",
"severity": [
{
"score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
"type": "CVSS_V3"
}
]
}
Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline
Sightings and recorded dates, grouped by day · UTC
How durations are calculated
Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.
Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.
Loading timeline…
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.