FKIE_CVE-2026-98294
Vulnerability from fkie_nvd - Published: 2026-10-06 09:18 - Updated: 2026-10-06 09:18
Severity
Summary
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: Do not write to the serial port after it is closed
hci_uart_close() closes the serdev port if HCI_QUIRK_NON_PERSISTENT_SETUP
is set (for example, for the WCN399x family). A failed hci_dev_open_sync()
following a successful qca_setup() calls hdev->close() but not
hdev->shutdown(), so the port is closed while power->vregs_on is left true.
qca_serdev_remove() then passes its power->vregs_on test and calls
qca_power_off(), which writes to the closed port unconditionally.
Seen on a WCN3988 by unbinding the driver after a controller failure. The
trace below is from a 7.0.0 based kernel, where qca_power_off() was still
named qca_power_shutdown():
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000038
Call trace:
tty_set_termios+0x50/0x238 (P)
ttyport_set_baudrate+0x84/0xc0
serdev_device_set_baudrate+0x24/0x40
qca_power_shutdown+0x158/0x1fc [hci_uart]
qca_serdev_remove+0x54/0x68 [hci_uart]
serdev_drv_remove+0x1c/0x2c
device_remove+0x4c/0x80
device_release_driver_internal+0x1cc/0x224
device_driver_detach+0x18/0x24
unbind_store+0xb4/0xc0
Check HCI_UART_PROTO_READY, which hci_uart_close() clears in the same place
it closes the port, before writing to it. The regulator disable is left
unconditional so the controller is still powered down.
The dangling serport->tty that turns this into a use-after-free is
addressed in a separate patch.
References
Impacted products
| Vendor | Product | Version |
|---|
{
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/bluetooth/hci_qca.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "a5414b0a9464b863733c8bd97493cb443a210ec4",
"status": "affected",
"version": "fa9ad876b8e0ebd2b4367ef1580f89be64ebd5d3",
"versionType": "git"
},
{
"lessThan": "15754e4ec47ac5d117c9609c34a49ed6980ac4a1",
"status": "affected",
"version": "fa9ad876b8e0ebd2b4367ef1580f89be64ebd5d3",
"versionType": "git"
},
{
"lessThan": "4e93c65f87825e1e012bce56615320aeb123815d",
"status": "affected",
"version": "fa9ad876b8e0ebd2b4367ef1580f89be64ebd5d3",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/bluetooth/hci_qca.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "4.19"
},
{
"lessThan": "4.19",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.54",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.2.*",
"status": "unaffected",
"version": "7.2.8",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.3-rc4",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nBluetooth: hci_qca: Do not write to the serial port after it is closed\n\nhci_uart_close() closes the serdev port if HCI_QUIRK_NON_PERSISTENT_SETUP\nis set (for example, for the WCN399x family). A failed hci_dev_open_sync()\nfollowing a successful qca_setup() calls hdev-\u003eclose() but not\nhdev-\u003eshutdown(), so the port is closed while power-\u003evregs_on is left true.\nqca_serdev_remove() then passes its power-\u003evregs_on test and calls\nqca_power_off(), which writes to the closed port unconditionally.\n\nSeen on a WCN3988 by unbinding the driver after a controller failure. The\ntrace below is from a 7.0.0 based kernel, where qca_power_off() was still\nnamed qca_power_shutdown():\n\n Unable to handle kernel NULL pointer dereference at virtual address\n 0000000000000038\n Call trace:\n tty_set_termios+0x50/0x238 (P)\n ttyport_set_baudrate+0x84/0xc0\n serdev_device_set_baudrate+0x24/0x40\n qca_power_shutdown+0x158/0x1fc [hci_uart]\n qca_serdev_remove+0x54/0x68 [hci_uart]\n serdev_drv_remove+0x1c/0x2c\n device_remove+0x4c/0x80\n device_release_driver_internal+0x1cc/0x224\n device_driver_detach+0x18/0x24\n unbind_store+0xb4/0xc0\n\nCheck HCI_UART_PROTO_READY, which hci_uart_close() clears in the same place\nit closes the port, before writing to it. The regulator disable is left\nunconditional so the controller is still powered down.\n\nThe dangling serport-\u003etty that turns this into a use-after-free is\naddressed in a separate patch."
}
],
"id": "CVE-2026-98294",
"lastModified": "2026-10-06T09:18:19.887",
"metrics": {},
"published": "2026-10-06T09:18:19.887",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/15754e4ec47ac5d117c9609c34a49ed6980ac4a1"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/4e93c65f87825e1e012bce56615320aeb123815d"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/a5414b0a9464b863733c8bd97493cb443a210ec4"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Received"
}
Loading…
Loading…
Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline
Sightings and recorded dates, grouped by day · UTC
Loading timeline…
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.