FKIE_CVE-2026-80818
Vulnerability from fkie_nvd - Published: 2026-09-04 16:18 - Updated: 2026-10-19 09:17
Severity
Summary
In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Fix CMD_SYNC use-after-free on teardown
arm_smmu_impl_remove() is registered as a devres action in
arm_smmu_impl_probe(), before arm_smmu_init_queues() allocates
smmu->cmdq.q.base. On a devres unwind, whether a failed probe or an
unbind, the queue is freed first and arm_smmu_impl_remove() then runs
tegra241_cmdqv_remove_vintf(), whose VINTF deinit issues a CMD_SYNC on
the freed memory.
Observed during testing with a QEMU hack that makes the VCMDQ fail to
enable, so the impl reset fails and probe aborts into the devres unwind:
platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: failed to enable, STATUS=0x00000000
platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: GERRORN=0x0, GERROR=0x4, CONS=0x0
platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: uncleared error detected, resetting
arm-smmu-v3 arm-smmu-v3.0.auto: failed to reset impl
arm-smmu-v3 arm-smmu-v3.0.auto: probe with driver arm-smmu-v3 failed with error -110
Unable to handle kernel paging request at virtual address ffff8000891e0098
...
Internal error: Oops: 0000000096000047 [#1] SMP
...
Call trace:
arm_smmu_cmdq_issue_cmdlist+0x320/0x6fc (P)
tegra241_vcmdq_hw_deinit+0x98/0x168
tegra241_vintf_hw_deinit+0x5c/0x1b0
tegra241_cmdqv_remove_vintf+0x34/0xec
tegra241_cmdqv_remove+0x40/0x9c
arm_smmu_impl_remove+0x20/0x30
devm_action_release+0x14/0x20
devres_release_all+0xa8/0x110
device_unbind_cleanup+0x18/0x84
really_probe+0x1f0/0x29c
Drop the VINTF deinit from tegra241_cmdqv_remove_vintf() so the unwind no
longer touches the freed queue. Quiesce the VINTFs earlier instead. Add a
device_disable() impl op and run it from arm_smmu_disable_action() while
the CMDQ is still up. That handles a live unbind. A failed reset is already
handled because tegra241_vintf_hw_init() deinits the VINTF on its own error
path. tegra241_cmdqv_remove_vintf() is also used by the iommufd viommu
destroy path, so quiesce there too.
References
Impacted products
| Vendor | Product | Version |
|---|
{
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c",
"drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h",
"drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "d2ab08437e913d9e4dda4dfd0d327446ec8717fc",
"status": "affected",
"version": "4dc0d12474f9d4833c3dd96b73d61e406d3f5dc7",
"versionType": "git"
},
{
"lessThan": "a94309bb99eaf0c6a2ace4927864486d19458eb5",
"status": "affected",
"version": "4dc0d12474f9d4833c3dd96b73d61e406d3f5dc7",
"versionType": "git"
},
{
"lessThan": "5994617e09ee6016c1b094f29d9c85cac944b477",
"status": "affected",
"version": "4dc0d12474f9d4833c3dd96b73d61e406d3f5dc7",
"versionType": "git"
},
{
"lessThan": "9ff145a25c5c8a26b06ef7cf558fb536b18bba6d",
"status": "affected",
"version": "4dc0d12474f9d4833c3dd96b73d61e406d3f5dc7",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c",
"drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h",
"drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "6.17"
},
{
"lessThan": "6.17",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.47",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.1.*",
"status": "unaffected",
"version": "7.1.11",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.2.*",
"status": "unaffected",
"version": "7.2.1",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.3",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\niommu/tegra241-cmdqv: Fix CMD_SYNC use-after-free on teardown\n\narm_smmu_impl_remove() is registered as a devres action in\narm_smmu_impl_probe(), before arm_smmu_init_queues() allocates\nsmmu-\u003ecmdq.q.base. On a devres unwind, whether a failed probe or an\nunbind, the queue is freed first and arm_smmu_impl_remove() then runs\ntegra241_cmdqv_remove_vintf(), whose VINTF deinit issues a CMD_SYNC on\nthe freed memory.\n\nObserved during testing with a QEMU hack that makes the VCMDQ fail to\nenable, so the impl reset fails and probe aborts into the devres unwind:\n\n platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: failed to enable, STATUS=0x00000000\n platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: GERRORN=0x0, GERROR=0x4, CONS=0x0\n platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: uncleared error detected, resetting\n arm-smmu-v3 arm-smmu-v3.0.auto: failed to reset impl\n arm-smmu-v3 arm-smmu-v3.0.auto: probe with driver arm-smmu-v3 failed with error -110\n Unable to handle kernel paging request at virtual address ffff8000891e0098\n ...\n Internal error: Oops: 0000000096000047 [#1] SMP\n ...\n Call trace:\n arm_smmu_cmdq_issue_cmdlist+0x320/0x6fc (P)\n tegra241_vcmdq_hw_deinit+0x98/0x168\n tegra241_vintf_hw_deinit+0x5c/0x1b0\n tegra241_cmdqv_remove_vintf+0x34/0xec\n tegra241_cmdqv_remove+0x40/0x9c\n arm_smmu_impl_remove+0x20/0x30\n devm_action_release+0x14/0x20\n devres_release_all+0xa8/0x110\n device_unbind_cleanup+0x18/0x84\n really_probe+0x1f0/0x29c\n\nDrop the VINTF deinit from tegra241_cmdqv_remove_vintf() so the unwind no\nlonger touches the freed queue. Quiesce the VINTFs earlier instead. Add a\ndevice_disable() impl op and run it from arm_smmu_disable_action() while\nthe CMDQ is still up. That handles a live unbind. A failed reset is already\nhandled because tegra241_vintf_hw_init() deinits the VINTF on its own error\npath. tegra241_cmdqv_remove_vintf() is also used by the iommufd viommu\ndestroy path, so quiesce there too."
}
],
"id": "CVE-2026-80818",
"lastModified": "2026-10-19T09:17:16.713",
"metrics": {},
"published": "2026-09-04T16:18:09.453",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/5994617e09ee6016c1b094f29d9c85cac944b477"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/9ff145a25c5c8a26b06ef7cf558fb536b18bba6d"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/a94309bb99eaf0c6a2ace4927864486d19458eb5"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/d2ab08437e913d9e4dda4dfd0d327446ec8717fc"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Received"
}
Loading…
Loading…
Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline
Sightings and recorded dates, grouped by day · UTC
Loading timeline…
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.