FKIE_CVE-2026-68116

Vulnerability from fkie_nvd - Published: 2026-08-10 13:19 - Updated: 2026-10-16 16:19
Summary
In the Linux kernel, the following vulnerability has been resolved: vxlan: mdb: Fix source list corruption on a failed replace When replacing the source list of an MDB remote entry, all existing sources are first marked for deletion and vxlan_mdb_remote_srcs_add() is then called to add the new source list. Sources present in the new list have their deletion mark cleared, and any sources left marked afterwards are removed. If vxlan_mdb_remote_srcs_add() fails partway through, its error path deletes all entries on the remote's source list. That rollback is only correct for its other caller, vxlan_mdb_remote_add(), where the remote was just allocated and the list contains solely entries added during the call. On the replace path the list also holds pre-existing sources, so a failed replace tears them down together with their (S, G) forwarding entries instead of leaving the entry unchanged. This is reachable from an existing (*, G) remote. An EXCLUDE filter that loses sources starts forwarding traffic that should be blocked, while an INCLUDE filter that loses sources drops traffic that should be forwarded. Mark entries created during the current pass with a new VXLAN_SGRP_F_NEW flag. On failure, delete only those entries and clear the deletion mark on the pre-existing ones, so a failed replace leaves the source list untouched. Retain the flag until the whole operation succeeds and then clear it. Also stop vxlan_mdb_remote_src_add() from deleting a pre-existing entry it only looked up when adding that entry's forwarding entry fails.
Impacted products
Vendor Product Version

{
  "affected": [
    {
      "affectedData": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/vxlan/vxlan_mdb.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "5bc8fc1d2ff802eec839e03adef5df597421898d",
              "status": "affected",
              "version": "a3a48de5eade770e911d35291217bdd69ce04ef1",
              "versionType": "git"
            },
            {
              "lessThan": "2c54dff57606590fa4abec46bab6bea3133f1539",
              "status": "affected",
              "version": "a3a48de5eade770e911d35291217bdd69ce04ef1",
              "versionType": "git"
            },
            {
              "lessThan": "79370b573e92e8f190eb5f9a511fa5398340d8b2",
              "status": "affected",
              "version": "a3a48de5eade770e911d35291217bdd69ce04ef1",
              "versionType": "git"
            },
            {
              "lessThan": "54a3c27b357dfb34f327f89bfadeb998bef8051e",
              "status": "affected",
              "version": "a3a48de5eade770e911d35291217bdd69ce04ef1",
              "versionType": "git"
            },
            {
              "lessThan": "dcd9b465965422b9654f6026e8a2fa8984f74c3c",
              "status": "affected",
              "version": "a3a48de5eade770e911d35291217bdd69ce04ef1",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/vxlan/vxlan_mdb.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.4"
            },
            {
              "lessThan": "6.4",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.148",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.101",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.42",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.1.*",
              "status": "unaffected",
              "version": "7.1.6",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.2",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nvxlan: mdb: Fix source list corruption on a failed replace\n\nWhen replacing the source list of an MDB remote entry, all existing\nsources are first marked for deletion and vxlan_mdb_remote_srcs_add()\nis then called to add the new source list. Sources present in the new\nlist have their deletion mark cleared, and any sources left marked\nafterwards are removed.\n\nIf vxlan_mdb_remote_srcs_add() fails partway through, its error path\ndeletes all entries on the remote\u0027s source list. That rollback is only\ncorrect for its other caller, vxlan_mdb_remote_add(), where the remote\nwas just allocated and the list contains solely entries added during\nthe call. On the replace path the list also holds pre-existing sources,\nso a failed replace tears them down together with their (S, G)\nforwarding entries instead of leaving the entry unchanged.\n\nThis is reachable from an existing (*, G) remote. An EXCLUDE filter\nthat loses sources starts forwarding traffic that should be blocked,\nwhile an INCLUDE filter that loses sources drops traffic that should be\nforwarded.\n\nMark entries created during the current pass with a new\nVXLAN_SGRP_F_NEW flag. On failure, delete only those entries and clear\nthe deletion mark on the pre-existing ones, so a failed replace leaves\nthe source list untouched. Retain the flag until the whole operation\nsucceeds and then clear it. Also stop vxlan_mdb_remote_src_add() from\ndeleting a pre-existing entry it only looked up when adding that\nentry\u0027s forwarding entry fails."
    }
  ],
  "id": "CVE-2026-68116",
  "lastModified": "2026-10-16T16:19:40.267",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "LOCAL",
          "availabilityImpact": "HIGH",
          "baseScore": 7.9,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "LOW",
          "integrityImpact": "LOW",
          "privilegesRequired": "LOW",
          "scope": "CHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:L/I:L/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 2.0,
        "impactScore": 5.3,
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "type": "Secondary"
      }
    ],
    "ssvcV203": [
      {
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "ssvcData": {
          "id": "CVE-2026-68116",
          "options": [
            {
              "exploitation": "none"
            },
            {
              "automatable": "no"
            },
            {
              "technicalImpact": "partial"
            }
          ],
          "role": "CISA Coordinator",
          "timestamp": "2026-10-16T15:44:03.646035Z",
          "version": "2.0.3"
        }
      }
    ]
  },
  "published": "2026-08-10T13:19:56.560",
  "references": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/2c54dff57606590fa4abec46bab6bea3133f1539"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/54a3c27b357dfb34f327f89bfadeb998bef8051e"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/5bc8fc1d2ff802eec839e03adef5df597421898d"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/79370b573e92e8f190eb5f9a511fa5398340d8b2"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/dcd9b465965422b9654f6026e8a2fa8984f74c3c"
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "vulnStatus": "Received"
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.