FKIE_CVE-2026-64504
Vulnerability from fkie_nvd - Published: 2026-07-25 10:17 - Updated: 2026-07-25 10:17
Severity
Summary
In the Linux kernel, the following vulnerability has been resolved:
iio: accel: bmc150: clamp the device-reported FIFO frame count
__bmc150_accel_fifo_flush() copies the number of samples the device
reports in its hardware FIFO into an on-stack buffer
u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3];
which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The
frame count is read from the FIFO_STATUS register and only masked to its
7 valid bits:
count = val & 0x7F;
so it can be 0..127. The only other limit applied to it is the optional
caller-supplied sample budget:
if (samples && count > samples)
count = samples;
which does not constrain count on the flush-all path (samples == 0), and
leaves it well above 32 whenever samples is larger. count samples are
then transferred into buffer[]:
bmc150_accel_fifo_transfer(data, (u8 *)buffer, count);
bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a
malfunctioning, malicious or counterfeit accelerometer (or an attacker
tampering with the I2C/SPI bus) that reports up to 127 frames writes up
to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up
to 570 bytes that clobbers the stack canary, saved registers and the
return address.
Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[]
is sized for, before the transfer, mirroring the watermark clamp already
done in bmc150_accel_set_watermark(). A well-formed flush reports at most
BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected.
References
Impacted products
| Vendor | Product | Version |
|---|
{
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/iio/accel/bmc150-accel-core.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "b5a9f521e0a49a0266200fd535b32a9668ecb33b",
"status": "affected",
"version": "3bbec9773389112330954a6a64422eaa78d546c1",
"versionType": "git"
},
{
"lessThan": "2fe0531dd73eff1de0f2584cb77716d645e548d5",
"status": "affected",
"version": "3bbec9773389112330954a6a64422eaa78d546c1",
"versionType": "git"
},
{
"lessThan": "d0e6d924a5484e005cae5aff6a0aa07a22f3c9ff",
"status": "affected",
"version": "3bbec9773389112330954a6a64422eaa78d546c1",
"versionType": "git"
},
{
"lessThan": "bfffc98f3de92e0f76be7c7b72e63ac1776a6dbc",
"status": "affected",
"version": "3bbec9773389112330954a6a64422eaa78d546c1",
"versionType": "git"
},
{
"lessThan": "89f4a4ca0ac3a933c750569a771c079a290b0721",
"status": "affected",
"version": "3bbec9773389112330954a6a64422eaa78d546c1",
"versionType": "git"
},
{
"lessThan": "3e766526827acd542bcd36c20c4d5f397e0f6521",
"status": "affected",
"version": "3bbec9773389112330954a6a64422eaa78d546c1",
"versionType": "git"
},
{
"lessThan": "35a3cd8fd65e15029eb90f1e510045b1bb071175",
"status": "affected",
"version": "3bbec9773389112330954a6a64422eaa78d546c1",
"versionType": "git"
},
{
"lessThan": "ce0e1cae26096fe959a0da5563a6d6d5a801d5fb",
"status": "affected",
"version": "3bbec9773389112330954a6a64422eaa78d546c1",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/iio/accel/bmc150-accel-core.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "4.1"
},
{
"lessThan": "4.1",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.261",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.212",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.178",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.145",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.96",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.39",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.1.*",
"status": "unaffected",
"version": "7.1.4",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.2-rc3",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\niio: accel: bmc150: clamp the device-reported FIFO frame count\n\n__bmc150_accel_fifo_flush() copies the number of samples the device\nreports in its hardware FIFO into an on-stack buffer\n\n\tu16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3];\n\nwhich is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The\nframe count is read from the FIFO_STATUS register and only masked to its\n7 valid bits:\n\n\tcount = val \u0026 0x7F;\n\nso it can be 0..127. The only other limit applied to it is the optional\ncaller-supplied sample budget:\n\n\tif (samples \u0026\u0026 count \u003e samples)\n\t\tcount = samples;\n\nwhich does not constrain count on the flush-all path (samples == 0), and\nleaves it well above 32 whenever samples is larger. count samples are\nthen transferred into buffer[]:\n\n\tbmc150_accel_fifo_transfer(data, (u8 *)buffer, count);\n\nbmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a\nmalfunctioning, malicious or counterfeit accelerometer (or an attacker\ntampering with the I2C/SPI bus) that reports up to 127 frames writes up\nto 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up\nto 570 bytes that clobbers the stack canary, saved registers and the\nreturn address.\n\nClamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[]\nis sized for, before the transfer, mirroring the watermark clamp already\ndone in bmc150_accel_set_watermark(). A well-formed flush reports at most\nBMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected."
}
],
"id": "CVE-2026-64504",
"lastModified": "2026-07-25T10:17:36.443",
"metrics": {},
"published": "2026-07-25T10:17:36.443",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/2fe0531dd73eff1de0f2584cb77716d645e548d5"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/35a3cd8fd65e15029eb90f1e510045b1bb071175"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/3e766526827acd542bcd36c20c4d5f397e0f6521"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/89f4a4ca0ac3a933c750569a771c079a290b0721"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/b5a9f521e0a49a0266200fd535b32a9668ecb33b"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/bfffc98f3de92e0f76be7c7b72e63ac1776a6dbc"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/ce0e1cae26096fe959a0da5563a6d6d5a801d5fb"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/d0e6d924a5484e005cae5aff6a0aa07a22f3c9ff"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Received"
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…