FKIE_CVE-2026-53059
Vulnerability from fkie_nvd - Published: 2026-06-24 17:17 - Updated: 2026-07-02 12:17
Severity
Summary
In the Linux kernel, the following vulnerability has been resolved:
dm log: fix out-of-bounds write due to region_count overflow
The local variable region_count in create_log_context() is declared as
unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).
When a device-mapper target has a sufficiently large ti->len with a small
region_size, the division result can exceed UINT_MAX. The truncated
value is then used to calculate bitset_size, causing clean_bits,
sync_bits, and recovering_bits to be allocated far smaller than needed
for the actual number of regions.
Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use
region indices derived from the full untruncated region space, causing
out-of-bounds writes to kernel heap memory allocated by vmalloc.
This can be reproduced by creating a mirror target whose region_count
overflows 32 bits:
dmsetup create bigzero --table '0 8589934594 zero'
dmsetup create mymirror --table '0 8589934594 mirror \
core 2 2 nosync 2 /dev/mapper/bigzero 0 \
/dev/mapper/bigzero 0'
The status output confirms the truncation (sync_count=1 instead of
4294967297, because 0x100000001 was truncated to 1):
$ dmsetup status mymirror
0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...
This leads to a kernel crash in core_in_sync:
BUG: scheduling while atomic: (udev-worker)/9150/0x00000000
RIP: 0010:core_in_sync+0x14/0x30 [dm_log]
CR2: 0000000000000008
Fixing recursive fault but reboot is needed!
Fix by widening the local region_count to sector_t and adding an
explicit overflow check before the value is assigned to lc->region_count.
References
Impacted products
| Vendor | Product | Version |
|---|
{
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/md/dm-log.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "44ab8875ae4a2842bde2d756bed195d375e0debb",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "defe483e47173768c227532694dc78cb65db5f09",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "3ec74da927b4e171a6fc0e77b1188ba4d019af51",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "d4ac87567f86a55c3c92e9a5144dcd943a9772a1",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "12bd5b88e91a02785244ff1d20fb157e96e9cdc8",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "b455903eed4558982be0811f5b7f44f6bbc4ff57",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "4ec8323b9f0764a14d532b1ae9b87f8a9fecb867",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "c20e36b7631d83e7535877f08af8b0af72c44b1a",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/md/dm-log.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "2.6.12"
},
{
"lessThan": "2.6.12",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.258",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.209",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.175",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.141",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.91",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.33",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.10",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"affectedData": [
{
"cpes": [
"cpe:/o:redhat:enterprise_linux:10"
],
"defaultStatus": "affected",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat"
},
{
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "affected",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "affected",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat"
},
{
"cpes": [
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat"
},
{
"cpes": [
"cpe:/o:redhat:enterprise_linux:6"
],
"defaultStatus": "unknown",
"product": "Red Hat Enterprise Linux 6",
"vendor": "Red Hat"
}
],
"source": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\ndm log: fix out-of-bounds write due to region_count overflow\n\nThe local variable region_count in create_log_context() is declared as\nunsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).\nWhen a device-mapper target has a sufficiently large ti-\u003elen with a small\nregion_size, the division result can exceed UINT_MAX. The truncated\nvalue is then used to calculate bitset_size, causing clean_bits,\nsync_bits, and recovering_bits to be allocated far smaller than needed\nfor the actual number of regions.\n\nSubsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use\nregion indices derived from the full untruncated region space, causing\nout-of-bounds writes to kernel heap memory allocated by vmalloc.\n\nThis can be reproduced by creating a mirror target whose region_count\noverflows 32 bits:\n\n dmsetup create bigzero --table \u00270 8589934594 zero\u0027\n dmsetup create mymirror --table \u00270 8589934594 mirror \\\n core 2 2 nosync 2 /dev/mapper/bigzero 0 \\\n /dev/mapper/bigzero 0\u0027\n\nThe status output confirms the truncation (sync_count=1 instead of\n4294967297, because 0x100000001 was truncated to 1):\n\n $ dmsetup status mymirror\n 0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...\n\nThis leads to a kernel crash in core_in_sync:\n\n BUG: scheduling while atomic: (udev-worker)/9150/0x00000000\n RIP: 0010:core_in_sync+0x14/0x30 [dm_log]\n CR2: 0000000000000008\n Fixing recursive fault but reboot is needed!\n\nFix by widening the local region_count to sector_t and adding an\nexplicit overflow check before the value is assigned to lc-\u003eregion_count."
}
],
"id": "CVE-2026-53059",
"lastModified": "2026-07-02T12:17:32.537",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "HIGH",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 6.3,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "HIGH",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:H",
"version": "3.1"
},
"exploitabilityScore": 1.0,
"impactScore": 5.2,
"source": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"type": "Secondary"
}
]
},
"published": "2026-06-24T17:17:18.463",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/12bd5b88e91a02785244ff1d20fb157e96e9cdc8"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/3ec74da927b4e171a6fc0e77b1188ba4d019af51"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/44ab8875ae4a2842bde2d756bed195d375e0debb"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/4ec8323b9f0764a14d532b1ae9b87f8a9fecb867"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/b455903eed4558982be0811f5b7f44f6bbc4ff57"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/c20e36b7631d83e7535877f08af8b0af72c44b1a"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/d4ac87567f86a55c3c92e9a5144dcd943a9772a1"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/defe483e47173768c227532694dc78cb65db5f09"
},
{
"source": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"url": "https://access.redhat.com/security/cve/CVE-2026-53059"
},
{
"source": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=2492277"
},
{
"source": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-53059.json"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Received",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-190"
}
],
"source": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"type": "Secondary"
}
]
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…