FKIE_CVE-2026-43466

Vulnerability from fkie_nvd - Published: 2026-05-08 15:16 - Updated: 2026-05-21 15:39
Summary
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery In case of a TX error CQE, a recovery flow is triggered, mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc, desyncing the DMA FIFO producer and consumer. After recovery, the producer pushes new DMA entries at the old dma_fifo_pc, while the consumer reads from position 0. This causes us to unmap stale DMA addresses from before the recovery. The DMA FIFO is a purely software construct with no HW counterpart. At the point of reset, all WQEs have been flushed so dma_fifo_cc is already equal to dma_fifo_pc. There is no need to reset either counter, similar to how skb_fifo pc/cc are untouched. Remove the 'dma_fifo_cc = 0' reset. This fixes the following WARNING: WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90 Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00 Call Trace: <IRQ> ? __warn+0x7d/0x110 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0x16d/0x180 ? handle_bug+0x4f/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 ? iommu_dma_unmap_page+0x2e/0x90 dma_unmap_page_attrs+0x10d/0x1b0 mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core] mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core] mlx5e_napi_poll+0x8b/0xac0 [mlx5_core] __napi_poll+0x24/0x190 net_rx_action+0x32a/0x3b0 ? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core] ? notifier_call_chain+0x35/0xa0 handle_softirqs+0xc9/0x270 irq_exit_rcu+0x71/0xd0 common_interrupt+0x7f/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40

{
  "configurations": [
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "DEE6D861-833E-4A69-98AC-2743228E5BAF",
              "versionEndExcluding": "5.10.253",
              "versionStartIncluding": "4.17",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "20DDB3E9-AABF-4107-ADB0-5362AA067045",
              "versionEndExcluding": "5.15.203",
              "versionStartIncluding": "5.11",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "2EDC6BAF-B710-4E26-B6AA-D68922EE7B43",
              "versionEndExcluding": "6.1.167",
              "versionStartIncluding": "5.16",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "C57BB918-DF28-46B3-94F7-144176841267",
              "versionEndExcluding": "6.6.130",
              "versionStartIncluding": "6.2",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "28D591F5-B196-4CC9-905C-DC80F116E7A8",
              "versionEndExcluding": "6.12.78",
              "versionStartIncluding": "6.7",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "D394AC60-6F28-435F-872A-CCDF384B8331",
              "versionEndExcluding": "6.18.19",
              "versionStartIncluding": "6.13",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "E825E7C3-FEAC-4FD3-8A81-78D7387948C9",
              "versionEndExcluding": "6.19.9",
              "versionStartIncluding": "6.19",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc1:*:*:*:*:*:*",
              "matchCriteriaId": "F253B622-8837-4245-BCE5-A7BF8FC76A16",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc2:*:*:*:*:*:*",
              "matchCriteriaId": "4AE85AD8-4641-4E7C-A2F4-305E2CD9EE64",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc3:*:*:*:*:*:*",
              "matchCriteriaId": "F666C8D8-6538-46D4-B318-87610DE64C34",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery\n\nIn case of a TX error CQE, a recovery flow is triggered,\nmlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc,\ndesyncing the DMA FIFO producer and consumer.\n\nAfter recovery, the producer pushes new DMA entries at the old\ndma_fifo_pc, while the consumer reads from position 0.\nThis causes us to unmap stale DMA addresses from before the recovery.\n\nThe DMA FIFO is a purely software construct with no HW counterpart.\nAt the point of reset, all WQEs have been flushed so dma_fifo_cc is\nalready equal to dma_fifo_pc. There is no need to reset either counter,\nsimilar to how skb_fifo pc/cc are untouched.\n\nRemove the \u0027dma_fifo_cc = 0\u0027 reset.\n\nThis fixes the following WARNING:\n    WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90\n    Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables]\n    CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1\n    Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014\n    RIP: 0010:iommu_dma_unmap_page+0x79/0x90\n    Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff \u003c0f\u003e 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00\n    Call Trace:\n     \u003cIRQ\u003e\n     ? __warn+0x7d/0x110\n     ? iommu_dma_unmap_page+0x79/0x90\n     ? report_bug+0x16d/0x180\n     ? handle_bug+0x4f/0x90\n     ? exc_invalid_op+0x14/0x70\n     ? asm_exc_invalid_op+0x16/0x20\n     ? iommu_dma_unmap_page+0x79/0x90\n     ? iommu_dma_unmap_page+0x2e/0x90\n     dma_unmap_page_attrs+0x10d/0x1b0\n     mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core]\n     mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core]\n     mlx5e_napi_poll+0x8b/0xac0 [mlx5_core]\n     __napi_poll+0x24/0x190\n     net_rx_action+0x32a/0x3b0\n     ? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core]\n     ? notifier_call_chain+0x35/0xa0\n     handle_softirqs+0xc9/0x270\n     irq_exit_rcu+0x71/0xd0\n     common_interrupt+0x7f/0xa0\n     \u003c/IRQ\u003e\n     \u003cTASK\u003e\n     asm_common_interrupt+0x22/0x40"
    }
  ],
  "id": "CVE-2026-43466",
  "lastModified": "2026-05-21T15:39:39.883",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "NETWORK",
          "availabilityImpact": "HIGH",
          "baseScore": 8.2,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "NONE",
          "integrityImpact": "LOW",
          "privilegesRequired": "NONE",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 3.9,
        "impactScore": 4.2,
        "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "type": "Secondary"
      }
    ]
  },
  "published": "2026-05-08T15:16:59.543",
  "references": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/1633111d69053512d099658d4a05fc736fab36b0"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/383b37c04a4827ba60b2bafc1a6cdfd995aed58f"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/6eb68ecc5acc3b319986566c595990b8a7265b23"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/6f41f7812bfa7f991b732a4b45c5c52fc4be3b4e"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/821f85d619f7f22cda7b9d7de89cf5eeb1d11544"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/829efcccfa8f69db5dc8332961295587d218cee6"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/9c5ee9b981ee050b73fdf3f4a2464d6f1a8e10a8"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/ce1b19dd0684eeb68a124c11085bd611260b36d9"
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "vulnStatus": "Analyzed",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "NVD-CWE-noinfo"
        }
      ],
      "source": "nvd@nist.gov",
      "type": "Primary"
    }
  ]
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.


Loading…

Detection rules are retrieved from Rulezet.

Loading…

Loading…