FKIE_CVE-2024-50196

Vulnerability from fkie_nvd - Published: 2024-11-08 06:15 - Updated: 2026-06-17 08:03
Severity
5.5 (Medium) - CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
5.5 (Medium) - CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Summary
In the Linux kernel, the following vulnerability has been resolved: pinctrl: ocelot: fix system hang on level based interrupts The current implementation only calls chained_irq_enter() and chained_irq_exit() if it detects pending interrupts. ``` for (i = 0; i < info->stride; i++) { uregmap_read(info->map, id_reg + 4 * i, &reg); if (!reg) continue; chained_irq_enter(parent_chip, desc); ``` However, in case of GPIO pin configured in level mode and the parent controller configured in edge mode, GPIO interrupt might be lowered by the hardware. In the result, if the interrupt is short enough, the parent interrupt is still pending while the GPIO interrupt is cleared; chained_irq_enter() never gets called and the system hangs trying to service the parent interrupt. Moving chained_irq_enter() and chained_irq_exit() outside the for loop ensures that they are called even when GPIO interrupt is lowered by the hardware. The similar code with chained_irq_enter() / chained_irq_exit() functions wrapping interrupt checking loop may be found in many other drivers: ``` grep -r -A 10 chained_irq_enter drivers/pinctrl ```
References
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/20728e86289ab463b99b7ab4425515bd26aba417Patch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/4a81800ef05bea5a9896f199677f7b7f5020776aPatch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/655f5d4662b958122b260be05aa6dfdf8768efe6Patch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/93b8ddc54507a227087c60a0013ed833b6ae7d3cPatch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/dcbe9954634807ec54e22bde278b5b269f921381Patch
af854a3a-2127-422b-91ae-364da2661108https://lists.debian.org/debian-lts-announce/2025/01/msg00001.html
Impacted products
Vendor Product Version
linux linux_kernel *
linux linux_kernel *
linux linux_kernel *
linux linux_kernel *
linux linux_kernel 6.12
linux linux_kernel 6.12
linux linux_kernel 6.12
To clipboard 

{
  "affected": [
    {
      "affectedData": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/pinctrl/pinctrl-ocelot.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "655f5d4662b958122b260be05aa6dfdf8768efe6",
              "status": "affected",
              "version": "ce8dc0943357a5d10b05dcf0556b537c1d7b8b1f",
              "versionType": "git"
            },
            {
              "lessThan": "4a81800ef05bea5a9896f199677f7b7f5020776a",
              "status": "affected",
              "version": "ce8dc0943357a5d10b05dcf0556b537c1d7b8b1f",
              "versionType": "git"
            },
            {
              "lessThan": "20728e86289ab463b99b7ab4425515bd26aba417",
              "status": "affected",
              "version": "ce8dc0943357a5d10b05dcf0556b537c1d7b8b1f",
              "versionType": "git"
            },
            {
              "lessThan": "dcbe9954634807ec54e22bde278b5b269f921381",
              "status": "affected",
              "version": "ce8dc0943357a5d10b05dcf0556b537c1d7b8b1f",
              "versionType": "git"
            },
            {
              "lessThan": "93b8ddc54507a227087c60a0013ed833b6ae7d3c",
              "status": "affected",
              "version": "ce8dc0943357a5d10b05dcf0556b537c1d7b8b1f",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/pinctrl/pinctrl-ocelot.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "4.16"
            },
            {
              "lessThan": "4.16",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.15.*",
              "status": "unaffected",
              "version": "5.15.169",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.114",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.58",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.11.*",
              "status": "unaffected",
              "version": "6.11.5",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "6.12",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "configurations": [
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "6BDAF23B-6DD3-4FF3-9077-AE6E61F87D65",
              "versionEndExcluding": "5.15.169",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "10FD2B3E-C7D9-4A9C-BD64-41877EDF88EB",
              "versionEndExcluding": "6.1.114",
              "versionStartIncluding": "5.16",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "6B9489BC-825E-4EEE-8D93-F93C801988C8",
              "versionEndExcluding": "6.6.58",
              "versionStartIncluding": "6.2",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "6E62D61A-F704-44DB-A311-17B7534DA7BC",
              "versionEndExcluding": "6.11.5",
              "versionStartIncluding": "6.7",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.12:rc1:*:*:*:*:*:*",
              "matchCriteriaId": "7F361E1D-580F-4A2D-A509-7615F73167A1",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.12:rc2:*:*:*:*:*:*",
              "matchCriteriaId": "925478D0-3E3D-4E6F-ACD5-09F28D5DF82C",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.12:rc3:*:*:*:*:*:*",
              "matchCriteriaId": "3C95E234-D335-4B6C-96BF-E2CEBD8654ED",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\npinctrl: ocelot: fix system hang on level based interrupts\n\nThe current implementation only calls chained_irq_enter() and\nchained_irq_exit() if it detects pending interrupts.\n\n```\nfor (i = 0; i \u003c info-\u003estride; i++) {\n\turegmap_read(info-\u003emap, id_reg + 4 * i, \u0026reg);\n\tif (!reg)\n\t\tcontinue;\n\n\tchained_irq_enter(parent_chip, desc);\n```\n\nHowever, in case of GPIO pin configured in level mode and the parent\ncontroller configured in edge mode, GPIO interrupt might be lowered by the\nhardware. In the result, if the interrupt is short enough, the parent\ninterrupt is still pending while the GPIO interrupt is cleared;\nchained_irq_enter() never gets called and the system hangs trying to\nservice the parent interrupt.\n\nMoving chained_irq_enter() and chained_irq_exit() outside the for loop\nensures that they are called even when GPIO interrupt is lowered by the\nhardware.\n\nThe similar code with chained_irq_enter() / chained_irq_exit() functions\nwrapping interrupt checking loop may be found in many other drivers:\n```\ngrep -r -A 10 chained_irq_enter drivers/pinctrl\n```"
    },
    {
      "lang": "es",
      "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: pinctrl: ocelot: arregla el bloqueo del sistema en interrupciones basadas en niveles La implementaci\u00f3n actual solo llama a chained_irq_enter() y chained_irq_exit() si detecta interrupciones pendientes. ``` for (i = 0; i \u0026lt; info-\u0026gt;stride; i++) { uregmap_read(info-\u0026gt;map, id_reg + 4 * i, \u00ae); if (!reg) continue; chained_irq_enter(parent_chip, desc); ``` Sin embargo, en el caso de que el pin GPIO est\u00e9 configurado en modo de nivel y el controlador principal est\u00e9 configurado en modo de borde, el hardware puede reducir la interrupci\u00f3n GPIO. Como resultado, si la interrupci\u00f3n es lo suficientemente corta, la interrupci\u00f3n principal sigue pendiente mientras se borra la interrupci\u00f3n GPIO; chained_irq_enter() nunca se llama y el sistema se cuelga al intentar dar servicio a la interrupci\u00f3n principal. Mover chained_irq_enter() y chained_irq_exit() fuera del bucle for garantiza que se llamen incluso cuando el hardware reduce la interrupci\u00f3n GPIO. El c\u00f3digo similar con las funciones chained_irq_enter() / chained_irq_exit() que envuelven el bucle de verificaci\u00f3n de interrupciones se puede encontrar en muchos otros controladores: ``` grep -r -A 10 chained_irq_enter drivers/pinctrl ```"
    }
  ],
  "id": "CVE-2024-50196",
  "lastModified": "2026-06-17T08:03:50.810",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "LOCAL",
          "availabilityImpact": "HIGH",
          "baseScore": 5.5,
          "baseSeverity": "MEDIUM",
          "confidentialityImpact": "NONE",
          "integrityImpact": "NONE",
          "privilegesRequired": "LOW",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 1.8,
        "impactScore": 3.6,
        "source": "nvd@nist.gov",
        "type": "Primary"
      },
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "LOCAL",
          "availabilityImpact": "HIGH",
          "baseScore": 5.5,
          "baseSeverity": "MEDIUM",
          "confidentialityImpact": "NONE",
          "integrityImpact": "NONE",
          "privilegesRequired": "LOW",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 1.8,
        "impactScore": 3.6,
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "type": "Secondary"
      }
    ],
    "ssvcV203": [
      {
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "ssvcData": {
          "id": "CVE-2024-50196",
          "options": [
            {
              "exploitation": "none"
            },
            {
              "automatable": "no"
            },
            {
              "technicalImpact": "partial"
            }
          ],
          "role": "CISA Coordinator",
          "timestamp": "2025-10-01T20:17:59.256112Z",
          "version": "2.0.3"
        }
      }
    ]
  },
  "published": "2024-11-08T06:15:16.347",
  "references": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/20728e86289ab463b99b7ab4425515bd26aba417"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/4a81800ef05bea5a9896f199677f7b7f5020776a"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/655f5d4662b958122b260be05aa6dfdf8768efe6"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/93b8ddc54507a227087c60a0013ed833b6ae7d3c"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/dcbe9954634807ec54e22bde278b5b269f921381"
    },
    {
      "source": "af854a3a-2127-422b-91ae-364da2661108",
      "url": "https://lists.debian.org/debian-lts-announce/2025/01/msg00001.html"
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "vulnStatus": "Modified",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "CWE-754"
        }
      ],
      "source": "nvd@nist.gov",
      "type": "Primary"
    },
    {
      "description": [
        {
          "lang": "en",
          "value": "CWE-754"
        }
      ],
      "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
      "type": "Secondary"
    }
  ]
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Loading timeline…




    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.