FKIE_CVE-2020-3507

Vulnerability from fkie_nvd - Published: 2020-08-26 17:15 - Updated: 2026-06-17 03:18
Summary
Multiple vulnerabilities in the Cisco Discovery Protocol implementation for Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to execute code remotely or cause a reload of an affected IP camera. These vulnerabilities are due to missing checks when the IP cameras process a Cisco Discovery Protocol packet. An attacker could exploit these vulnerabilities by sending a malicious Cisco Discovery Protocol packet to the targeted IP camera. A successful exploit could allow the attacker to execute code on the affected IP camera or cause it to reload unexpectedly, resulting in a denial of service (DoS) condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

{
  "affected": [
    {
      "affectedData": [
        {
          "product": "Cisco Video Surveillance 8000 Series IP Cameras",
          "vendor": "Cisco",
          "versions": [
            {
              "status": "affected",
              "version": "n/a"
            }
          ]
        }
      ],
      "source": "psirt@cisco.com"
    }
  ],
  "configurations": [
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:cisco:8000p_ip_camera_firmware:1.0.9-1:*:*:*:*:*:*:*",
              "matchCriteriaId": "D3935C4D-C2CC-41CC-B4AD-C937AE0EE453",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        },
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:h:cisco:8000p_ip_camera:-:*:*:*:*:*:*:*",
              "matchCriteriaId": "EC586459-C532-4A89-8C43-58DA17181A38",
              "vulnerable": false
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ],
      "operator": "AND"
    },
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:cisco:8020_ip_camera_firmware:1.0.9-1:*:*:*:*:*:*:*",
              "matchCriteriaId": "FA240114-0DD3-4A51-A608-1FF580101C42",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        },
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:h:cisco:8020_ip_camera:-:*:*:*:*:*:*:*",
              "matchCriteriaId": "B783A438-0D5A-4BA7-97E0-0FA917045B37",
              "vulnerable": false
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ],
      "operator": "AND"
    },
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:cisco:8030_ip_camera_firmware:1.0.9-1:*:*:*:*:*:*:*",
              "matchCriteriaId": "72FB8025-1CAC-47B7-8257-AD3F9ABBF09A",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        },
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:h:cisco:8030_ip_camera:-:*:*:*:*:*:*:*",
              "matchCriteriaId": "42E1CC6F-8A71-4012-ABF8-F0DF96B23949",
              "vulnerable": false
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ],
      "operator": "AND"
    },
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:cisco:8070_ip_camera_firmware:1.0.9-1:*:*:*:*:*:*:*",
              "matchCriteriaId": "0FD7FD0A-54D3-4509-BCEF-744768806D66",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        },
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:h:cisco:8070_ip_camera:-:*:*:*:*:*:*:*",
              "matchCriteriaId": "BD2510BB-580C-4826-BE9D-4879F2B8BDA5",
              "vulnerable": false
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ],
      "operator": "AND"
    },
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:cisco:8400_ip_camera_firmware:1.0.9-1:*:*:*:*:*:*:*",
              "matchCriteriaId": "0218F35E-821A-458E-BFE7-3E261D27799A",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        },
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:h:cisco:8400_ip_camera:-:*:*:*:*:*:*:*",
              "matchCriteriaId": "12067AE1-9A55-43BE-8C75-849E060AF41A",
              "vulnerable": false
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ],
      "operator": "AND"
    },
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:cisco:8620_ip_camera_firmware:1.0.9-1:*:*:*:*:*:*:*",
              "matchCriteriaId": "A6A0652F-6877-4E90-BF44-7ABAAC073FAE",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        },
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:h:cisco:8620_ip_camera:-:*:*:*:*:*:*:*",
              "matchCriteriaId": "AA06EF29-7996-4916-90E1-6A569EB95C6B",
              "vulnerable": false
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ],
      "operator": "AND"
    },
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:cisco:8630_ip_camera_firmware:1.0.9-1:*:*:*:*:*:*:*",
              "matchCriteriaId": "25BD75BB-6A2B-4826-AE0A-DD1561EC12A9",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        },
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:h:cisco:8630_ip_camera:-:*:*:*:*:*:*:*",
              "matchCriteriaId": "3214D558-A6FF-4B03-947B-40AD12355235",
              "vulnerable": false
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ],
      "operator": "AND"
    },
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:cisco:8930_speed_dome_ip_camera_firmware:1.0.9-1:*:*:*:*:*:*:*",
              "matchCriteriaId": "39CBBC9B-BBFB-4971-A34C-88619B0BC9C0",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        },
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:h:cisco:8930_speed_dome_ip_camera:-:*:*:*:*:*:*:*",
              "matchCriteriaId": "39E0E98A-F382-4AA8-B940-78A78C99736A",
              "vulnerable": false
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ],
      "operator": "AND"
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "Multiple vulnerabilities in the Cisco Discovery Protocol implementation for Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to execute code remotely or cause a reload of an affected IP camera. These vulnerabilities are due to missing checks when the IP cameras process a Cisco Discovery Protocol packet. An attacker could exploit these vulnerabilities by sending a malicious Cisco Discovery Protocol packet to the targeted IP camera. A successful exploit could allow the attacker to execute code on the affected IP camera or cause it to reload unexpectedly, resulting in a denial of service (DoS) condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent)."
    },
    {
      "lang": "es",
      "value": "M\u00faltiples vulnerabilidades en la implementaci\u00f3n de Cisco Discovery Protocol  para Cisco Video Surveillance 8000 Series IP Cameras, podr\u00edan permitir a un atacante adyacente no autenticado ejecutar c\u00f3digo remotamente o causar una recarga de una c\u00e1mara IP afectada. Estas vulnerabilidades son debido a una falta de comprobaciones cuando las c\u00e1maras IP procesan un paquete de Cisco Discovery Protocol. Un atacante podr\u00eda explotar estas vulnerabilidades mediante el env\u00edo de un paquete de Cisco Discovery Protocol malicioso hacia la c\u00e1mara IP objetivo. Una explotaci\u00f3n con \u00e9xito podr\u00eda permitir a un atacante ejecutar c\u00f3digo en la c\u00e1mara IP afectada o causar que se recargue inesperadamente, resultando en una condici\u00f3n de denegaci\u00f3n de servicio (DoS). Nota: Cisco Discovery Protocol es un protocolo de Capa 2. Para explotar estas vulnerabilidades, un atacante debe estar en el mismo dominio de transmisi\u00f3n que el dispositivo afectado (adyacente a Capa 2)"
    }
  ],
  "id": "CVE-2020-3507",
  "lastModified": "2026-06-17T03:18:27.750",
  "metrics": {
    "cvssMetricV2": [
      {
        "acInsufInfo": false,
        "baseSeverity": "HIGH",
        "cvssData": {
          "accessComplexity": "LOW",
          "accessVector": "ADJACENT_NETWORK",
          "authentication": "NONE",
          "availabilityImpact": "COMPLETE",
          "baseScore": 8.3,
          "confidentialityImpact": "COMPLETE",
          "integrityImpact": "COMPLETE",
          "vectorString": "AV:A/AC:L/Au:N/C:C/I:C/A:C",
          "version": "2.0"
        },
        "exploitabilityScore": 6.5,
        "impactScore": 10.0,
        "obtainAllPrivilege": false,
        "obtainOtherPrivilege": false,
        "obtainUserPrivilege": false,
        "source": "nvd@nist.gov",
        "type": "Primary",
        "userInteractionRequired": false
      }
    ],
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "ADJACENT_NETWORK",
          "availabilityImpact": "HIGH",
          "baseScore": 8.8,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 2.8,
        "impactScore": 5.9,
        "source": "psirt@cisco.com",
        "type": "Secondary"
      },
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "ADJACENT_NETWORK",
          "availabilityImpact": "HIGH",
          "baseScore": 8.8,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 2.8,
        "impactScore": 5.9,
        "source": "nvd@nist.gov",
        "type": "Primary"
      }
    ],
    "ssvcV203": [
      {
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "ssvcData": {
          "id": "CVE-2020-3507",
          "options": [
            {
              "exploitation": "none"
            },
            {
              "automatable": "no"
            },
            {
              "technicalImpact": "total"
            }
          ],
          "role": "CISA Coordinator",
          "timestamp": "2024-11-13T17:18:23.419030Z",
          "version": "2.0.3"
        }
      }
    ]
  },
  "published": "2020-08-26T17:15:14.490",
  "references": [
    {
      "source": "psirt@cisco.com",
      "tags": [
        "Vendor Advisory"
      ],
      "url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ipcameras-rce-dos-uPyJYxN3"
    },
    {
      "source": "af854a3a-2127-422b-91ae-364da2661108",
      "tags": [
        "Vendor Advisory"
      ],
      "url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ipcameras-rce-dos-uPyJYxN3"
    }
  ],
  "sourceIdentifier": "psirt@cisco.com",
  "vulnStatus": "Modified",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "CWE-20"
        }
      ],
      "source": "psirt@cisco.com",
      "type": "Secondary"
    },
    {
      "description": [
        {
          "lang": "en",
          "value": "CWE-20"
        }
      ],
      "source": "nvd@nist.gov",
      "type": "Primary"
    }
  ]
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.