CVE-2026-72116 (GCVE-0-2026-72116)

Vulnerability from cvelistv5 – Published: 2026-08-15 05:52 – Updated: 2026-08-19 16:36
VLAI
Title
can: bcm: fix stale rx/tx ops after device removal
Summary
In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix stale rx/tx ops after device removal RX: an RX_SETUP update(!) for an existing op skipped can_rx_register() unconditionally, even when a concurrent NETDEV_UNREGISTER had already torn down its registration (op->rx_reg_dev == NULL). This silently did not re-enable frame delivery for that updated filter. bcm_rx_setup() now re-registers in that case, while leaving rx_ops with ifindex = 0 (all CAN devices) which never carry a tracked rx_reg_dev registered as-is. TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving tx_ops with an active cyclic transmission re-arming its hrtimer indefinitely to execute bcm_tx_timeout_handler(). Cancelling the hrtimer prevents the runaway timer and any injection into a later reused ifindex, since nothing else calls bcm_can_tx() for the op until an explicit TX_SETUP update re-arms it. Unlike bcm_rx_unreg(), which clears the tracked rx_reg_dev for rx_ops, the ifindex is intentionally left unchanged for tx_ops. bcm_tx_setup() always rejects ifindex 0, so clearing it would strand the op: neither a later TX_SETUP (bcm_find_op()) nor TX_DELETE (bcm_delete_tx_op()) could ever find it again, since both require an exact ifindex match.
Impacted products
Vendor Product Version CPE status
Linux Linux Affected: ffd980f976e7fd666c2e61bf8ab35107efd11828 , < d30a36066ed3abefb72ae18901f71841ba18b350 (git)
Affected: ffd980f976e7fd666c2e61bf8ab35107efd11828 , < ca829677ffa2de5d79e06366e19ac1e4f5cc78dd (git)
Affected: ffd980f976e7fd666c2e61bf8ab35107efd11828 , < 9517d8fb0b191398d35b9b7f8c719c1cc7761cb1 (git)
Affected: ffd980f976e7fd666c2e61bf8ab35107efd11828 , < 60d8a7942f4ed2d975207aaeba1adb576707e53d (git)
Affected: ffd980f976e7fd666c2e61bf8ab35107efd11828 , < f749e4564952d60e96930c09f2be99955d07c22e (git)
Affected: ffd980f976e7fd666c2e61bf8ab35107efd11828 , < 6be3e1fedf03eab36a2c09d755d1171287b2014b (git)
Affected: ffd980f976e7fd666c2e61bf8ab35107efd11828 , < b31d0933509c5a35c0be5736a2ce8df0d1bf112c (git)
Affected: ffd980f976e7fd666c2e61bf8ab35107efd11828 , < 3b762c0d950383ab7a002686c9136b9aa55d2d70 (git)
guessed Create a notification for this product.
Linux Linux Affected: 2.6.25
Unaffected: 0 , < 2.6.25 (semver)
Unaffected: 5.10.265 , ≤ 5.10.* (semver)
Unaffected: 5.15.216 , ≤ 5.15.* (semver)
Unaffected: 6.1.183 , ≤ 6.1.* (semver)
Unaffected: 6.6.148 , ≤ 6.6.* (semver)
Unaffected: 6.12.101 , ≤ 6.12.* (semver)
Unaffected: 6.18.42 , ≤ 6.18.* (semver)
Unaffected: 7.1.5 , ≤ 7.1.* (semver)
Unaffected: 7.2 , ≤ * (original_commit_for_fix)
guessed Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "net/can/bcm.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "d30a36066ed3abefb72ae18901f71841ba18b350",
              "status": "affected",
              "version": "ffd980f976e7fd666c2e61bf8ab35107efd11828",
              "versionType": "git"
            },
            {
              "lessThan": "ca829677ffa2de5d79e06366e19ac1e4f5cc78dd",
              "status": "affected",
              "version": "ffd980f976e7fd666c2e61bf8ab35107efd11828",
              "versionType": "git"
            },
            {
              "lessThan": "9517d8fb0b191398d35b9b7f8c719c1cc7761cb1",
              "status": "affected",
              "version": "ffd980f976e7fd666c2e61bf8ab35107efd11828",
              "versionType": "git"
            },
            {
              "lessThan": "60d8a7942f4ed2d975207aaeba1adb576707e53d",
              "status": "affected",
              "version": "ffd980f976e7fd666c2e61bf8ab35107efd11828",
              "versionType": "git"
            },
            {
              "lessThan": "f749e4564952d60e96930c09f2be99955d07c22e",
              "status": "affected",
              "version": "ffd980f976e7fd666c2e61bf8ab35107efd11828",
              "versionType": "git"
            },
            {
              "lessThan": "6be3e1fedf03eab36a2c09d755d1171287b2014b",
              "status": "affected",
              "version": "ffd980f976e7fd666c2e61bf8ab35107efd11828",
              "versionType": "git"
            },
            {
              "lessThan": "b31d0933509c5a35c0be5736a2ce8df0d1bf112c",
              "status": "affected",
              "version": "ffd980f976e7fd666c2e61bf8ab35107efd11828",
              "versionType": "git"
            },
            {
              "lessThan": "3b762c0d950383ab7a002686c9136b9aa55d2d70",
              "status": "affected",
              "version": "ffd980f976e7fd666c2e61bf8ab35107efd11828",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "net/can/bcm.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "2.6.25"
            },
            {
              "lessThan": "2.6.25",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.10.*",
              "status": "unaffected",
              "version": "5.10.265",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.15.*",
              "status": "unaffected",
              "version": "5.15.216",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.183",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.148",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.101",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.42",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.1.*",
              "status": "unaffected",
              "version": "7.1.5",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.2",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.10.265",
                  "versionStartIncluding": "2.6.25",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.15.216",
                  "versionStartIncluding": "2.6.25",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.1.183",
                  "versionStartIncluding": "2.6.25",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.6.148",
                  "versionStartIncluding": "2.6.25",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.101",
                  "versionStartIncluding": "2.6.25",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.42",
                  "versionStartIncluding": "2.6.25",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.1.5",
                  "versionStartIncluding": "2.6.25",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.2",
                  "versionStartIncluding": "2.6.25",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ncan: bcm: fix stale rx/tx ops after device removal\n\nRX: an RX_SETUP update(!) for an existing op skipped can_rx_register()\nunconditionally, even when a concurrent NETDEV_UNREGISTER had already\ntorn down its registration (op-\u003erx_reg_dev == NULL). This silently\ndid not re-enable frame delivery for that updated filter. bcm_rx_setup()\nnow re-registers in that case, while leaving rx_ops with ifindex = 0\n(all CAN devices) which never carry a tracked rx_reg_dev registered as-is.\n\nTX: bcm_notify() only handled bo-\u003erx_ops on NETDEV_UNREGISTER, leaving\ntx_ops with an active cyclic transmission re-arming its hrtimer\nindefinitely to execute bcm_tx_timeout_handler(). Cancelling the hrtimer\nprevents the runaway timer and any injection into a later reused ifindex,\nsince nothing else calls bcm_can_tx() for the op until an explicit\nTX_SETUP update re-arms it.\n\nUnlike bcm_rx_unreg(), which clears the tracked rx_reg_dev for rx_ops,\nthe ifindex is intentionally left unchanged for tx_ops. bcm_tx_setup()\nalways rejects ifindex 0, so clearing it would strand the op: neither a\nlater TX_SETUP (bcm_find_op()) nor TX_DELETE (bcm_delete_tx_op()) could\never find it again, since both require an exact ifindex match."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H",
            "version": "3.1"
          },
          "scenarios": [
            {
              "lang": "en",
              "value": "AV:L - The bug is reached only via local PF_CAN/CAN_BCM syscalls (socket/connect/sendmsg TX_SETUP or RX_SETUP); bcm_tx_timeout_handler() is driven by a local hrtimer, not by remote network services or CAN bus frames alone.\nAC:L - An attacker controls both sides by arming cyclic TX with SETTIMER/STARTTIMER, then triggering or waiting for NETDEV_UNREGISTER (e.g., concurrent ip link del in a user namespace) while ifindex reuse is normal kernel behavior, making injection reliably achievable.\nPR:L - can_create(), bcm_connect(), and bcm_sendmsg() perform no capability checks; any local user with CAN access (or CAP_NET_ADMIN in an unprivileged user namespace to create vcan) can open BCM sockets and program cyclic TX/RX ops.\nUI:N - Exploitation requires only the attacker opening a BCM socket and sending TX_SETUP/RX_SETUP messages; no victim action such as mounting media or opening files is needed once local CAN access exists.\nS:U - Impact is unauthorized CAN transmission/monitoring disruption within the same kernel host; it does not cross VM, container, or IOMMU security boundaries even when frames reach an adjacent vehicle or factory CAN segment.\nC:N - The flaw causes stale timer-driven transmission and missed RX re-registration, not kernel memory disclosure; no out-of-bounds read, UAF, or other information-leak primitive is present in this bug.\nI:H - After NETDEV_UNREGISTER, orphaned tx_ops keep bcm_can_tx() running with a stale ifindex, so attacker-crafted cyclic CAN frames can be injected onto any later netdev that reuses that ifindex, including safety-critical automotive or industrial buses.\nA:H - Uncancelled hrtimers on stale tx_ops re-arm bcm_tx_timeout_handler() indefinitely after device removal, causing persistent timer/softirq CPU consumption, and the RX_SETUP path can silently stop frame delivery after unregister races."
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-08-19T16:36:05.976Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/d30a36066ed3abefb72ae18901f71841ba18b350"
        },
        {
          "url": "https://git.kernel.org/stable/c/ca829677ffa2de5d79e06366e19ac1e4f5cc78dd"
        },
        {
          "url": "https://git.kernel.org/stable/c/9517d8fb0b191398d35b9b7f8c719c1cc7761cb1"
        },
        {
          "url": "https://git.kernel.org/stable/c/60d8a7942f4ed2d975207aaeba1adb576707e53d"
        },
        {
          "url": "https://git.kernel.org/stable/c/f749e4564952d60e96930c09f2be99955d07c22e"
        },
        {
          "url": "https://git.kernel.org/stable/c/6be3e1fedf03eab36a2c09d755d1171287b2014b"
        },
        {
          "url": "https://git.kernel.org/stable/c/b31d0933509c5a35c0be5736a2ce8df0d1bf112c"
        },
        {
          "url": "https://git.kernel.org/stable/c/3b762c0d950383ab7a002686c9136b9aa55d2d70"
        }
      ],
      "title": "can: bcm: fix stale rx/tx ops after device removal",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-72116",
    "datePublished": "2026-08-15T05:52:56.260Z",
    "dateReserved": "2026-08-09T03:40:39.906Z",
    "dateUpdated": "2026-08-19T16:36:05.976Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-72116",
      "date": "2026-08-24",
      "epss": "0.00181",
      "percentile": "0.07641"
    },
    "nvd": "{\"cve\":{\"id\":\"CVE-2026-72116\",\"sourceIdentifier\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"published\":\"2026-08-15T06:21:26.020\",\"lastModified\":\"2026-08-19T17:20:57.960\",\"vulnStatus\":\"Received\",\"cveTags\":[],\"descriptions\":[{\"lang\":\"en\",\"value\":\"In the Linux kernel, the following vulnerability has been resolved:\\n\\ncan: bcm: fix stale rx/tx ops after device removal\\n\\nRX: an RX_SETUP update(!) for an existing op skipped can_rx_register()\\nunconditionally, even when a concurrent NETDEV_UNREGISTER had already\\ntorn down its registration (op-\u003erx_reg_dev == NULL). This silently\\ndid not re-enable frame delivery for that updated filter. bcm_rx_setup()\\nnow re-registers in that case, while leaving rx_ops with ifindex = 0\\n(all CAN devices) which never carry a tracked rx_reg_dev registered as-is.\\n\\nTX: bcm_notify() only handled bo-\u003erx_ops on NETDEV_UNREGISTER, leaving\\ntx_ops with an active cyclic transmission re-arming its hrtimer\\nindefinitely to execute bcm_tx_timeout_handler(). Cancelling the hrtimer\\nprevents the runaway timer and any injection into a later reused ifindex,\\nsince nothing else calls bcm_can_tx() for the op until an explicit\\nTX_SETUP update re-arms it.\\n\\nUnlike bcm_rx_unreg(), which clears the tracked rx_reg_dev for rx_ops,\\nthe ifindex is intentionally left unchanged for tx_ops. bcm_tx_setup()\\nalways rejects ifindex 0, so clearing it would strand the op: neither a\\nlater TX_SETUP (bcm_find_op()) nor TX_DELETE (bcm_delete_tx_op()) could\\never find it again, since both require an exact ifindex match.\"}],\"affected\":[{\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"affectedData\":[{\"vendor\":\"Linux\",\"product\":\"Linux\",\"defaultStatus\":\"unaffected\",\"programFiles\":[\"net/can/bcm.c\"],\"repo\":\"https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git\",\"versions\":[{\"version\":\"ffd980f976e7fd666c2e61bf8ab35107efd11828\",\"lessThan\":\"d30a36066ed3abefb72ae18901f71841ba18b350\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"ffd980f976e7fd666c2e61bf8ab35107efd11828\",\"lessThan\":\"ca829677ffa2de5d79e06366e19ac1e4f5cc78dd\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"ffd980f976e7fd666c2e61bf8ab35107efd11828\",\"lessThan\":\"9517d8fb0b191398d35b9b7f8c719c1cc7761cb1\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"ffd980f976e7fd666c2e61bf8ab35107efd11828\",\"lessThan\":\"60d8a7942f4ed2d975207aaeba1adb576707e53d\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"ffd980f976e7fd666c2e61bf8ab35107efd11828\",\"lessThan\":\"f749e4564952d60e96930c09f2be99955d07c22e\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"ffd980f976e7fd666c2e61bf8ab35107efd11828\",\"lessThan\":\"6be3e1fedf03eab36a2c09d755d1171287b2014b\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"ffd980f976e7fd666c2e61bf8ab35107efd11828\",\"lessThan\":\"b31d0933509c5a35c0be5736a2ce8df0d1bf112c\",\"versionType\":\"git\",\"status\":\"affected\"},{\"version\":\"ffd980f976e7fd666c2e61bf8ab35107efd11828\",\"lessThan\":\"3b762c0d950383ab7a002686c9136b9aa55d2d70\",\"versionType\":\"git\",\"status\":\"affected\"}]},{\"vendor\":\"Linux\",\"product\":\"Linux\",\"defaultStatus\":\"affected\",\"programFiles\":[\"net/can/bcm.c\"],\"repo\":\"https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git\",\"versions\":[{\"version\":\"2.6.25\",\"status\":\"affected\"},{\"version\":\"0\",\"lessThan\":\"2.6.25\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"5.10.265\",\"lessThanOrEqual\":\"5.10.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"5.15.216\",\"lessThanOrEqual\":\"5.15.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"6.1.183\",\"lessThanOrEqual\":\"6.1.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"6.6.148\",\"lessThanOrEqual\":\"6.6.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"6.12.101\",\"lessThanOrEqual\":\"6.12.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"6.18.42\",\"lessThanOrEqual\":\"6.18.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"7.1.5\",\"lessThanOrEqual\":\"7.1.*\",\"versionType\":\"semver\",\"status\":\"unaffected\"},{\"version\":\"7.2\",\"lessThanOrEqual\":\"*\",\"versionType\":\"original_commit_for_fix\",\"status\":\"unaffected\"}]}]}],\"metrics\":{\"cvssMetricV31\":[{\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"type\":\"Secondary\",\"cvssData\":{\"version\":\"3.1\",\"vectorString\":\"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H\",\"baseScore\":7.1,\"baseSeverity\":\"HIGH\",\"attackVector\":\"LOCAL\",\"attackComplexity\":\"LOW\",\"privilegesRequired\":\"LOW\",\"userInteraction\":\"NONE\",\"scope\":\"UNCHANGED\",\"confidentialityImpact\":\"NONE\",\"integrityImpact\":\"HIGH\",\"availabilityImpact\":\"HIGH\"},\"exploitabilityScore\":1.8,\"impactScore\":5.2}]},\"references\":[{\"url\":\"https://git.kernel.org/stable/c/3b762c0d950383ab7a002686c9136b9aa55d2d70\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/60d8a7942f4ed2d975207aaeba1adb576707e53d\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/6be3e1fedf03eab36a2c09d755d1171287b2014b\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/9517d8fb0b191398d35b9b7f8c719c1cc7761cb1\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/b31d0933509c5a35c0be5736a2ce8df0d1bf112c\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/ca829677ffa2de5d79e06366e19ac1e4f5cc78dd\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/d30a36066ed3abefb72ae18901f71841ba18b350\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/f749e4564952d60e96930c09f2be99955d07c22e\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"}]}}",
    "redhat_vex": {
      "aggregate_severity": "Moderate",
      "current_release_date": "2026-08-17T22:48:12+00:00",
      "cve": "CVE-2026-72116",
      "id": "CVE-2026-72116",
      "initial_release_date": "2026-08-15T00:00:00+00:00",
      "product_status:known_affected": "274",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: can: bcm: fix stale rx/tx ops after device removal",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-72116.json",
      "version": "3"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.

Loading…

Detection rules are retrieved from Rulezet.

Loading…

Loading…

Loading…