CVE-2026-43486 (GCVE-0-2026-43486)

Vulnerability from cvelistv5 – Published: 2026-05-13 15:08 – Updated: 2026-05-13 15:08
VLAI
Title
arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults
Summary
In the Linux kernel, the following vulnerability has been resolved: arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults contpte_ptep_set_access_flags() compared the gathered ptep_get() value against the requested entry to detect no-ops. ptep_get() ORs AF/dirty from all sub-PTEs in the CONT block, so a dirty sibling can make the target appear already-dirty. When the gathered value matches entry, the function returns 0 even though the target sub-PTE still has PTE_RDONLY set in hardware. For a CPU with FEAT_HAFDBS this gathered view is fine, since hardware may set AF/dirty on any sub-PTE and CPU TLB behavior is effectively gathered across the CONT range. But page-table walkers that evaluate each descriptor individually (e.g. a CPU without DBM support, or an SMMU without HTTU, or with HA/HD disabled in CD.TCR) can keep faulting on the unchanged target sub-PTE, causing an infinite fault loop. Gathering can therefore cause false no-ops when only a sibling has been updated: - write faults: target still has PTE_RDONLY (needs PTE_RDONLY cleared) - read faults: target still lacks PTE_AF Fix by checking each sub-PTE against the requested AF/dirty/write state (the same bits consumed by __ptep_set_access_flags()), using raw per-PTE values rather than the gathered ptep_get() view, before returning no-op. Keep using the raw target PTE for the write-bit unfold decision. Per Arm ARM (DDI 0487) D8.7.1 ("The Contiguous bit"), any sub-PTE in a CONT range may become the effective cached translation and software must maintain consistent attributes across the range.
Severity
5.5 (Medium)
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Assigner
Linux CNA under the mitre root
CNA scorecard D 53/100 over 7056 records in the last 180 days details
References
Impacted products
Vendor Product Version CPE status
Linux Linux Affected: 4602e5757bcceb231c3a13c36c373ad4a750eddb , < 05d239f2c95e66e27e7fb4e99ee07eb56e3e34b0 (git)
Affected: 4602e5757bcceb231c3a13c36c373ad4a750eddb , < 6f92a7a8b48a523f910ef25dd83808710724f59b (git)
Affected: 4602e5757bcceb231c3a13c36c373ad4a750eddb , < 09d620555e59768776090073a2c59d2bc8506eb3 (git)
Affected: 4602e5757bcceb231c3a13c36c373ad4a750eddb , < 97c5550b763171dbef61e6239cab372b9f9cd4a2 (git)
guessed Create a notification for this product.
Linux Linux Affected: 6.9
Unaffected: 0 , < 6.9 (semver)
Unaffected: 6.12.78 , ≤ 6.12.* (semver)
Unaffected: 6.18.19 , ≤ 6.18.* (semver)
Unaffected: 6.19.9 , ≤ 6.19.* (semver)
Unaffected: 7.0 , ≤ * (original_commit_for_fix)
guessed Create a notification for this product.
Show details on NVD website
To clipboard 

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "arch/arm64/mm/contpte.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "05d239f2c95e66e27e7fb4e99ee07eb56e3e34b0",
              "status": "affected",
              "version": "4602e5757bcceb231c3a13c36c373ad4a750eddb",
              "versionType": "git"
            },
            {
              "lessThan": "6f92a7a8b48a523f910ef25dd83808710724f59b",
              "status": "affected",
              "version": "4602e5757bcceb231c3a13c36c373ad4a750eddb",
              "versionType": "git"
            },
            {
              "lessThan": "09d620555e59768776090073a2c59d2bc8506eb3",
              "status": "affected",
              "version": "4602e5757bcceb231c3a13c36c373ad4a750eddb",
              "versionType": "git"
            },
            {
              "lessThan": "97c5550b763171dbef61e6239cab372b9f9cd4a2",
              "status": "affected",
              "version": "4602e5757bcceb231c3a13c36c373ad4a750eddb",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "arch/arm64/mm/contpte.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.9"
            },
            {
              "lessThan": "6.9",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.78",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.19",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.19.*",
              "status": "unaffected",
              "version": "6.19.9",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.0",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.78",
                  "versionStartIncluding": "6.9",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.19",
                  "versionStartIncluding": "6.9",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.19.9",
                  "versionStartIncluding": "6.9",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.0",
                  "versionStartIncluding": "6.9",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\narm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults\n\ncontpte_ptep_set_access_flags() compared the gathered ptep_get() value\nagainst the requested entry to detect no-ops. ptep_get() ORs AF/dirty\nfrom all sub-PTEs in the CONT block, so a dirty sibling can make the\ntarget appear already-dirty. When the gathered value matches entry, the\nfunction returns 0 even though the target sub-PTE still has PTE_RDONLY\nset in hardware.\n\nFor a CPU with FEAT_HAFDBS this gathered view is fine, since hardware may\nset AF/dirty on any sub-PTE and CPU TLB behavior is effectively gathered\nacross the CONT range. But page-table walkers that evaluate each\ndescriptor individually (e.g. a CPU without DBM support, or an SMMU\nwithout HTTU, or with HA/HD disabled in CD.TCR) can keep faulting on the\nunchanged target sub-PTE, causing an infinite fault loop.\n\nGathering can therefore cause false no-ops when only a sibling has been\nupdated:\n - write faults: target still has PTE_RDONLY (needs PTE_RDONLY cleared)\n - read faults:  target still lacks PTE_AF\n\nFix by checking each sub-PTE against the requested AF/dirty/write state\n(the same bits consumed by __ptep_set_access_flags()), using raw\nper-PTE values rather than the gathered ptep_get() view, before\nreturning no-op. Keep using the raw target PTE for the write-bit unfold\ndecision.\n\nPer Arm ARM (DDI 0487) D8.7.1 (\"The Contiguous bit\"), any sub-PTE in a CONT\nrange may become the effective cached translation and software must\nmaintain consistent attributes across the range."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-05-13T15:08:32.085Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/05d239f2c95e66e27e7fb4e99ee07eb56e3e34b0"
        },
        {
          "url": "https://git.kernel.org/stable/c/6f92a7a8b48a523f910ef25dd83808710724f59b"
        },
        {
          "url": "https://git.kernel.org/stable/c/09d620555e59768776090073a2c59d2bc8506eb3"
        },
        {
          "url": "https://git.kernel.org/stable/c/97c5550b763171dbef61e6239cab372b9f9cd4a2"
        }
      ],
      "title": "arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-43486",
    "datePublished": "2026-05-13T15:08:32.085Z",
    "dateReserved": "2026-05-01T14:12:56.012Z",
    "dateUpdated": "2026-05-13T15:08:32.085Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-43486",
      "date": "2026-10-25",
      "epss": "0.00114",
      "percentile": "0.01447"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "defaultStatus": "unaffected",
                "product": "Linux",
                "programFiles": [
                  "arch/arm64/mm/contpte.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "lessThan": "05d239f2c95e66e27e7fb4e99ee07eb56e3e34b0",
                    "status": "affected",
                    "version": "4602e5757bcceb231c3a13c36c373ad4a750eddb",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "6f92a7a8b48a523f910ef25dd83808710724f59b",
                    "status": "affected",
                    "version": "4602e5757bcceb231c3a13c36c373ad4a750eddb",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "09d620555e59768776090073a2c59d2bc8506eb3",
                    "status": "affected",
                    "version": "4602e5757bcceb231c3a13c36c373ad4a750eddb",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "97c5550b763171dbef61e6239cab372b9f9cd4a2",
                    "status": "affected",
                    "version": "4602e5757bcceb231c3a13c36c373ad4a750eddb",
                    "versionType": "git"
                  }
                ]
              },
              {
                "defaultStatus": "affected",
                "product": "Linux",
                "programFiles": [
                  "arch/arm64/mm/contpte.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "status": "affected",
                    "version": "6.9"
                  },
                  {
                    "lessThan": "6.9",
                    "status": "unaffected",
                    "version": "0",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.12.*",
                    "status": "unaffected",
                    "version": "6.12.78",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.18.*",
                    "status": "unaffected",
                    "version": "6.18.19",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.19.*",
                    "status": "unaffected",
                    "version": "6.19.9",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "*",
                    "status": "unaffected",
                    "version": "7.0",
                    "versionType": "original_commit_for_fix"
                  }
                ]
              }
            ],
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
          }
        ],
        "configurations": [
          {
            "nodes": [
              {
                "cpeMatch": [
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "D1D90B78-24E3-418D-A238-3FE23C32239B",
                    "versionEndExcluding": "6.12.78",
                    "versionStartIncluding": "6.9",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "D394AC60-6F28-435F-872A-CCDF384B8331",
                    "versionEndExcluding": "6.18.19",
                    "versionStartIncluding": "6.13",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "E825E7C3-FEAC-4FD3-8A81-78D7387948C9",
                    "versionEndExcluding": "6.19.9",
                    "versionStartIncluding": "6.19",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc1:*:*:*:*:*:*",
                    "matchCriteriaId": "F253B622-8837-4245-BCE5-A7BF8FC76A16",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc2:*:*:*:*:*:*",
                    "matchCriteriaId": "4AE85AD8-4641-4E7C-A2F4-305E2CD9EE64",
                    "vulnerable": true
                  }
                ],
                "negate": false,
                "operator": "OR"
              }
            ]
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "In the Linux kernel, the following vulnerability has been resolved:\n\narm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults\n\ncontpte_ptep_set_access_flags() compared the gathered ptep_get() value\nagainst the requested entry to detect no-ops. ptep_get() ORs AF/dirty\nfrom all sub-PTEs in the CONT block, so a dirty sibling can make the\ntarget appear already-dirty. When the gathered value matches entry, the\nfunction returns 0 even though the target sub-PTE still has PTE_RDONLY\nset in hardware.\n\nFor a CPU with FEAT_HAFDBS this gathered view is fine, since hardware may\nset AF/dirty on any sub-PTE and CPU TLB behavior is effectively gathered\nacross the CONT range. But page-table walkers that evaluate each\ndescriptor individually (e.g. a CPU without DBM support, or an SMMU\nwithout HTTU, or with HA/HD disabled in CD.TCR) can keep faulting on the\nunchanged target sub-PTE, causing an infinite fault loop.\n\nGathering can therefore cause false no-ops when only a sibling has been\nupdated:\n - write faults: target still has PTE_RDONLY (needs PTE_RDONLY cleared)\n - read faults:  target still lacks PTE_AF\n\nFix by checking each sub-PTE against the requested AF/dirty/write state\n(the same bits consumed by __ptep_set_access_flags()), using raw\nper-PTE values rather than the gathered ptep_get() view, before\nreturning no-op. Keep using the raw target PTE for the write-bit unfold\ndecision.\n\nPer Arm ARM (DDI 0487) D8.7.1 (\"The Contiguous bit\"), any sub-PTE in a CONT\nrange may become the effective cached translation and software must\nmaintain consistent attributes across the range."
          }
        ],
        "id": "CVE-2026-43486",
        "lastModified": "2026-06-26T19:23:45.627",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "LOW",
                "attackVector": "LOCAL",
                "availabilityImpact": "HIGH",
                "baseScore": 5.5,
                "baseSeverity": "MEDIUM",
                "confidentialityImpact": "NONE",
                "integrityImpact": "NONE",
                "privilegesRequired": "LOW",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
                "version": "3.1"
              },
              "exploitabilityScore": 1.8,
              "impactScore": 3.6,
              "source": "nvd@nist.gov",
              "type": "Primary"
            }
          ]
        },
        "published": "2026-05-13T16:16:51.880",
        "references": [
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/05d239f2c95e66e27e7fb4e99ee07eb56e3e34b0"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/09d620555e59768776090073a2c59d2bc8506eb3"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/6f92a7a8b48a523f910ef25dd83808710724f59b"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/97c5550b763171dbef61e6239cab372b9f9cd4a2"
          }
        ],
        "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "vulnStatus": "Analyzed",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "CWE-835"
              }
            ],
            "source": "nvd@nist.gov",
            "type": "Primary"
          }
        ]
      }
    },
    "redhat_vex": {
      "aggregate_severity": "Moderate",
      "current_release_date": "2026-06-28T06:05:17+00:00",
      "cve": "CVE-2026-43486",
      "id": "CVE-2026-43486",
      "initial_release_date": "2026-05-13T00:00:00+00:00",
      "product_status:known_affected": "76",
      "product_status:known_not_affected": "198",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-43486.json",
      "version": "3"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON

Loading timeline…




    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.