CVE-2026-23343 (GCVE-0-2026-23343)
Vulnerability from cvelistv5 – Published: 2026-03-25 10:27 – Updated: 2026-11-10 12:42
VLAI
EPSS
VEX
Title
xdp: produce a warning when calculated tailroom is negative
Summary
In the Linux kernel, the following vulnerability has been resolved:
xdp: produce a warning when calculated tailroom is negative
Many ethernet drivers report xdp Rx queue frag size as being the same as
DMA write size. However, the only user of this field, namely
bpf_xdp_frags_increase_tail(), clearly expects a truesize.
Such difference leads to unspecific memory corruption issues under certain
circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when
running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses
all DMA-writable space in 2 buffers. This would be fine, if only
rxq->frag_size was properly set to 4K, but value of 3K results in a
negative tailroom, because there is a non-zero page offset.
We are supposed to return -EINVAL and be done with it in such case, but due
to tailroom being stored as an unsigned int, it is reported to be somewhere
near UINT_MAX, resulting in a tail being grown, even if the requested
offset is too much (it is around 2K in the abovementioned test). This later
leads to all kinds of unspecific calltraces.
[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6
[ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4
[ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000]
[ 7340.339230] in xskxceiver[42b5,400000+69000]
[ 7340.340300] likely on CPU 6 (core 0, socket 6)
[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe
[ 7340.340888] likely on CPU 3 (core 0, socket 3)
[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7
[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI
[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)
[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80
[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89
[ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202
[ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010
[ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff
[ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0
[ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0
[ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500
[ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000
[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0
[ 7340.421237] PKRU: 55555554
[ 7340.421623] Call Trace:
[ 7340.421987] <TASK>
[ 7340.422309] ? softleaf_from_pte+0x77/0xa0
[ 7340.422855] swap_pte_batch+0xa7/0x290
[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270
[ 7340.424102] zap_pte_range+0x281/0x580
[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240
[ 7340.425177] unmap_page_range+0x24d/0x420
[ 7340.425714] unmap_vmas+0xa1/0x180
[ 7340.426185] exit_mmap+0xe1/0x3b0
[ 7340.426644] __mmput+0x41/0x150
[ 7340.427098] exit_mm+0xb1/0x110
[ 7340.427539] do_exit+0x1b2/0x460
[ 7340.427992] do_group_exit+0x2d/0xc0
[ 7340.428477] get_signal+0x79d/0x7e0
[ 7340.428957] arch_do_signal_or_restart+0x34/0x100
[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0
[ 7340.430159] do_syscall_64+0x188/
---truncated---
Severity
No CVSS data available.
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-11-05 21:27 UTC
Assigner
References
10 references
Impacted products
18 products
| Vendor | Product | Version | CPE status | |
|---|---|---|---|---|
| Linux | Linux |
Affected:
bf25146a5595269810b1f47d048f114c5ff9f544 , < 01379540452a02bbc52f639d45dd365cd3624efb
(git)
Affected: bf25146a5595269810b1f47d048f114c5ff9f544 , < a0fb59f527d03c60b2cd547cfae4a842ad84670f (git) Affected: bf25146a5595269810b1f47d048f114c5ff9f544 , < c7c790a07697148c41e2d03eb28efe132adda749 (git) Affected: bf25146a5595269810b1f47d048f114c5ff9f544 , < 98cd8b4d0b836d3edf70161f40efd9cbb8c8f252 (git) Affected: bf25146a5595269810b1f47d048f114c5ff9f544 , < 94b9da7e9f958cb3d115b21eff824ecd8c3217aa (git) Affected: bf25146a5595269810b1f47d048f114c5ff9f544 , < 8821e857759be9db3cde337ad328b71fe5c8a55f (git) |
guessed | |
| Linux | Linux |
Affected:
5.18
Unaffected: 0 , < 5.18 (semver) Unaffected: 6.1.167 , ≤ 6.1.* (semver) Unaffected: 6.6.130 , ≤ 6.6.* (semver) Unaffected: 6.12.77 , ≤ 6.12.* (semver) Unaffected: 6.18.17 , ≤ 6.18.* (semver) Unaffected: 6.19.7 , ≤ 6.19.* (semver) Unaffected: 7.0 , ≤ * (original_commit_for_fix) |
guessed | |
| Siemens | SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) |
Affected:
V3.1.6 , < *
(custom)
|
guessed | |
| Siemens | SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) |
Affected:
V3.1.5 , < *
(custom)
|
guessed | |
| Siemens | SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) |
Affected:
V3.1.7 , < *
(custom)
|
guessed | |
| Siemens | SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) |
Affected:
V3.1.6 , < *
(custom)
|
guessed | |
| Siemens | SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) |
Affected:
V3.1.5 , < *
(custom)
|
guessed | |
| Siemens | SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) |
Affected:
V3.1.7 , < *
(custom)
|
guessed | |
| Siemens | SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) |
Affected:
V3.1.6 , < *
(custom)
|
guessed | |
| Siemens | SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) |
Affected:
V3.1.5 , < *
(custom)
|
guessed | |
| Siemens | SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) |
Affected:
V3.1.7 , < *
(custom)
|
guessed | |
| Siemens | SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) |
Affected:
V3.1.6 , < *
(custom)
|
guessed | |
| Siemens | SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) |
Affected:
V3.1.5 , < *
(custom)
|
guessed | |
| Siemens | SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) |
Affected:
V3.1.7 , < *
(custom)
|
guessed | |
| Siemens | SIMATIC S7-1500 TM MFP - GNU/Linux subsystem |
Affected:
0 , < *
(custom)
|
guessed | |
| Siemens | SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) |
Affected:
V3.1.6 , < *
(custom)
|
guessed | |
| Siemens | SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) |
Affected:
V3.1.5 , < *
(custom)
|
guessed | |
| Siemens | SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) |
Affected:
V3.1.7 , < *
(custom)
|
guessed |
{
"containers": {
"adp": [
{
"affected": [
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-10T12:42:38.108Z",
"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"shortName": "siemens-SADP"
},
"references": [
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-082556.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-457936.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-784472.html"
}
],
"x_adpType": "supplier"
},
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-23343",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-05T21:27:24.669780Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-05T21:33:39.776Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"net/core/filter.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "01379540452a02bbc52f639d45dd365cd3624efb",
"status": "affected",
"version": "bf25146a5595269810b1f47d048f114c5ff9f544",
"versionType": "git"
},
{
"lessThan": "a0fb59f527d03c60b2cd547cfae4a842ad84670f",
"status": "affected",
"version": "bf25146a5595269810b1f47d048f114c5ff9f544",
"versionType": "git"
},
{
"lessThan": "c7c790a07697148c41e2d03eb28efe132adda749",
"status": "affected",
"version": "bf25146a5595269810b1f47d048f114c5ff9f544",
"versionType": "git"
},
{
"lessThan": "98cd8b4d0b836d3edf70161f40efd9cbb8c8f252",
"status": "affected",
"version": "bf25146a5595269810b1f47d048f114c5ff9f544",
"versionType": "git"
},
{
"lessThan": "94b9da7e9f958cb3d115b21eff824ecd8c3217aa",
"status": "affected",
"version": "bf25146a5595269810b1f47d048f114c5ff9f544",
"versionType": "git"
},
{
"lessThan": "8821e857759be9db3cde337ad328b71fe5c8a55f",
"status": "affected",
"version": "bf25146a5595269810b1f47d048f114c5ff9f544",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"net/core/filter.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "5.18"
},
{
"lessThan": "5.18",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.167",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.130",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.77",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.17",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.19.*",
"status": "unaffected",
"version": "6.19.7",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.0",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.167",
"versionStartIncluding": "5.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.130",
"versionStartIncluding": "5.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.77",
"versionStartIncluding": "5.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.17",
"versionStartIncluding": "5.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.19.7",
"versionStartIncluding": "5.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0",
"versionStartIncluding": "5.18",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nxdp: produce a warning when calculated tailroom is negative\n\nMany ethernet drivers report xdp Rx queue frag size as being the same as\nDMA write size. However, the only user of this field, namely\nbpf_xdp_frags_increase_tail(), clearly expects a truesize.\n\nSuch difference leads to unspecific memory corruption issues under certain\ncircumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when\nrunning xskxceiver\u0027s XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses\nall DMA-writable space in 2 buffers. This would be fine, if only\nrxq-\u003efrag_size was properly set to 4K, but value of 3K results in a\nnegative tailroom, because there is a non-zero page offset.\n\nWe are supposed to return -EINVAL and be done with it in such case, but due\nto tailroom being stored as an unsigned int, it is reported to be somewhere\nnear UINT_MAX, resulting in a tail being grown, even if the requested\noffset is too much (it is around 2K in the abovementioned test). This later\nleads to all kinds of unspecific calltraces.\n\n[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6\n[ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4\n[ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000]\n[ 7340.339230] in xskxceiver[42b5,400000+69000]\n[ 7340.340300] likely on CPU 6 (core 0, socket 6)\n[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 \u003c4c\u003e 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe\n[ 7340.340888] likely on CPU 3 (core 0, socket 3)\n[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff \u003c8b\u003e 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7\n[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI\n[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)\n[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014\n[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80\n[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 \u003c8b\u003e 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89\n[ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202\n[ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010\n[ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff\n[ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0\n[ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0\n[ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500\n[ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000\n[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033\n[ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0\n[ 7340.421237] PKRU: 55555554\n[ 7340.421623] Call Trace:\n[ 7340.421987] \u003cTASK\u003e\n[ 7340.422309] ? softleaf_from_pte+0x77/0xa0\n[ 7340.422855] swap_pte_batch+0xa7/0x290\n[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270\n[ 7340.424102] zap_pte_range+0x281/0x580\n[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240\n[ 7340.425177] unmap_page_range+0x24d/0x420\n[ 7340.425714] unmap_vmas+0xa1/0x180\n[ 7340.426185] exit_mmap+0xe1/0x3b0\n[ 7340.426644] __mmput+0x41/0x150\n[ 7340.427098] exit_mm+0xb1/0x110\n[ 7340.427539] do_exit+0x1b2/0x460\n[ 7340.427992] do_group_exit+0x2d/0xc0\n[ 7340.428477] get_signal+0x79d/0x7e0\n[ 7340.428957] arch_do_signal_or_restart+0x34/0x100\n[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0\n[ 7340.430159] do_syscall_64+0x188/\n---truncated---"
}
],
"providerMetadata": {
"dateUpdated": "2026-05-11T22:05:00.366Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/01379540452a02bbc52f639d45dd365cd3624efb"
},
{
"url": "https://git.kernel.org/stable/c/a0fb59f527d03c60b2cd547cfae4a842ad84670f"
},
{
"url": "https://git.kernel.org/stable/c/c7c790a07697148c41e2d03eb28efe132adda749"
},
{
"url": "https://git.kernel.org/stable/c/98cd8b4d0b836d3edf70161f40efd9cbb8c8f252"
},
{
"url": "https://git.kernel.org/stable/c/94b9da7e9f958cb3d115b21eff824ecd8c3217aa"
},
{
"url": "https://git.kernel.org/stable/c/8821e857759be9db3cde337ad328b71fe5c8a55f"
}
],
"title": "xdp: produce a warning when calculated tailroom is negative",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-23343",
"datePublished": "2026-03-25T10:27:31.130Z",
"dateReserved": "2026-01-13T15:37:45.999Z",
"dateUpdated": "2026-11-10T12:42:38.108Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-23343",
"date": "2026-11-15",
"epss": "0.00143",
"percentile": "0.03705"
},
"microsoft_vex": {
"current_release_date": "2026-03-27T14:44:00.000Z",
"cve": "CVE-2026-23343",
"id": "msrc_CVE-2026-23343",
"initial_release_date": "2026-03-02T00:00:00.000Z",
"product_status:fixed": "1",
"product_status:known_affected": "1",
"source": "Microsoft CSAF VEX",
"status": "final",
"title": "xdp: produce a warning when calculated tailroom is negative",
"url": "https://msrc.microsoft.com/csaf/vex/2026/msrc_cve-2026-23343.json",
"version": "2"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"net/core/filter.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "01379540452a02bbc52f639d45dd365cd3624efb",
"status": "affected",
"version": "bf25146a5595269810b1f47d048f114c5ff9f544",
"versionType": "git"
},
{
"lessThan": "a0fb59f527d03c60b2cd547cfae4a842ad84670f",
"status": "affected",
"version": "bf25146a5595269810b1f47d048f114c5ff9f544",
"versionType": "git"
},
{
"lessThan": "c7c790a07697148c41e2d03eb28efe132adda749",
"status": "affected",
"version": "bf25146a5595269810b1f47d048f114c5ff9f544",
"versionType": "git"
},
{
"lessThan": "98cd8b4d0b836d3edf70161f40efd9cbb8c8f252",
"status": "affected",
"version": "bf25146a5595269810b1f47d048f114c5ff9f544",
"versionType": "git"
},
{
"lessThan": "94b9da7e9f958cb3d115b21eff824ecd8c3217aa",
"status": "affected",
"version": "bf25146a5595269810b1f47d048f114c5ff9f544",
"versionType": "git"
},
{
"lessThan": "8821e857759be9db3cde337ad328b71fe5c8a55f",
"status": "affected",
"version": "bf25146a5595269810b1f47d048f114c5ff9f544",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"net/core/filter.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "5.18"
},
{
"lessThan": "5.18",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.167",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.130",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.77",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.17",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.19.*",
"status": "unaffected",
"version": "6.19.7",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.0",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"affectedData": [
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
}
],
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e"
}
],
"configurations": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "855AA2BD-E6C2-496C-83DC-52A42A51EE40",
"versionEndExcluding": "6.1.167",
"versionStartIncluding": "5.18.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "C57BB918-DF28-46B3-94F7-144176841267",
"versionEndExcluding": "6.6.130",
"versionStartIncluding": "6.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "B3D12E00-E42D-4056-B354-BAD4903C03A5",
"versionEndExcluding": "6.12.77",
"versionStartIncluding": "6.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "A5E006E4-59C7-43C1-9231-62A72219F2BA",
"versionEndExcluding": "6.18.17",
"versionStartIncluding": "6.13",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "69245D10-0B71-485E-80C3-A64F077004D3",
"versionEndExcluding": "6.19.7",
"versionStartIncluding": "6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:5.18:-:*:*:*:*:*:*",
"matchCriteriaId": "0384FA0A-DE99-48D7-84E3-46ED0C3B5E03",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc1:*:*:*:*:*:*",
"matchCriteriaId": "F253B622-8837-4245-BCE5-A7BF8FC76A16",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc2:*:*:*:*:*:*",
"matchCriteriaId": "4AE85AD8-4641-4E7C-A2F4-305E2CD9EE64",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc3:*:*:*:*:*:*",
"matchCriteriaId": "F666C8D8-6538-46D4-B318-87610DE64C34",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc4:*:*:*:*:*:*",
"matchCriteriaId": "02259FDA-961B-47BC-AE7F-93D7EC6E90C2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc5:*:*:*:*:*:*",
"matchCriteriaId": "58A9FEFF-C040-420D-8F0A-BFDAAA1DF258",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc6:*:*:*:*:*:*",
"matchCriteriaId": "1D2315C0-D46F-4F85-9754-F9E5E11374A6",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc7:*:*:*:*:*:*",
"matchCriteriaId": "512EE3A8-A590-4501-9A94-5D4B268D6138",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nxdp: produce a warning when calculated tailroom is negative\n\nMany ethernet drivers report xdp Rx queue frag size as being the same as\nDMA write size. However, the only user of this field, namely\nbpf_xdp_frags_increase_tail(), clearly expects a truesize.\n\nSuch difference leads to unspecific memory corruption issues under certain\ncircumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when\nrunning xskxceiver\u0027s XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses\nall DMA-writable space in 2 buffers. This would be fine, if only\nrxq-\u003efrag_size was properly set to 4K, but value of 3K results in a\nnegative tailroom, because there is a non-zero page offset.\n\nWe are supposed to return -EINVAL and be done with it in such case, but due\nto tailroom being stored as an unsigned int, it is reported to be somewhere\nnear UINT_MAX, resulting in a tail being grown, even if the requested\noffset is too much (it is around 2K in the abovementioned test). This later\nleads to all kinds of unspecific calltraces.\n\n[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6\n[ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4\n[ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000]\n[ 7340.339230] in xskxceiver[42b5,400000+69000]\n[ 7340.340300] likely on CPU 6 (core 0, socket 6)\n[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 \u003c4c\u003e 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe\n[ 7340.340888] likely on CPU 3 (core 0, socket 3)\n[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff \u003c8b\u003e 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7\n[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI\n[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)\n[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014\n[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80\n[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 \u003c8b\u003e 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89\n[ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202\n[ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010\n[ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff\n[ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0\n[ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0\n[ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500\n[ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000\n[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033\n[ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0\n[ 7340.421237] PKRU: 55555554\n[ 7340.421623] Call Trace:\n[ 7340.421987] \u003cTASK\u003e\n[ 7340.422309] ? softleaf_from_pte+0x77/0xa0\n[ 7340.422855] swap_pte_batch+0xa7/0x290\n[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270\n[ 7340.424102] zap_pte_range+0x281/0x580\n[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240\n[ 7340.425177] unmap_page_range+0x24d/0x420\n[ 7340.425714] unmap_vmas+0xa1/0x180\n[ 7340.426185] exit_mmap+0xe1/0x3b0\n[ 7340.426644] __mmput+0x41/0x150\n[ 7340.427098] exit_mm+0xb1/0x110\n[ 7340.427539] do_exit+0x1b2/0x460\n[ 7340.427992] do_group_exit+0x2d/0xc0\n[ 7340.428477] get_signal+0x79d/0x7e0\n[ 7340.428957] arch_do_signal_or_restart+0x34/0x100\n[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0\n[ 7340.430159] do_syscall_64+0x188/\n---truncated---"
}
],
"id": "CVE-2026-23343",
"lastModified": "2026-11-10T13:18:42.220",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"exploitabilityScore": 1.8,
"impactScore": 5.9,
"source": "nvd@nist.gov",
"type": "Primary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2026-23343",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-05T21:27:24.669780Z",
"version": "2.0.3"
}
}
]
},
"published": "2026-03-25T11:16:32.300",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/01379540452a02bbc52f639d45dd365cd3624efb"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/8821e857759be9db3cde337ad328b71fe5c8a55f"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/94b9da7e9f958cb3d115b21eff824ecd8c3217aa"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/98cd8b4d0b836d3edf70161f40efd9cbb8c8f252"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/a0fb59f527d03c60b2cd547cfae4a842ad84670f"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/c7c790a07697148c41e2d03eb28efe132adda749"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"url": "https://cert-portal.siemens.com/productcert/html/ssa-082556.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"url": "https://cert-portal.siemens.com/productcert/html/ssa-457936.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"url": "https://cert-portal.siemens.com/productcert/html/ssa-784472.html"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Modified",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-787"
}
],
"source": "nvd@nist.gov",
"type": "Primary"
}
]
}
},
"redhat_vex": {
"aggregate_severity": "Moderate",
"current_release_date": "2026-11-05T19:12:25+00:00",
"cve": "CVE-2026-23343",
"id": "CVE-2026-23343",
"initial_release_date": "2026-03-25T00:00:00+00:00",
"product_status:known_affected": "124",
"product_status:known_not_affected": "76",
"source": "Red Hat CSAF VEX",
"status": "final",
"title": "kernel: xdp: produce a warning when calculated tailroom is negative",
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-23343.json",
"version": "3"
},
"vulnrichment": {
"containers": {
"adp": [
{
"affected": [
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-10T12:42:38.108Z",
"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"shortName": "siemens-SADP"
},
"references": [
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-082556.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-457936.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-784472.html"
}
],
"x_adpType": "supplier"
},
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-23343",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-05T21:27:24.669780Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-05T21:27:25.617Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"net/core/filter.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "01379540452a02bbc52f639d45dd365cd3624efb",
"status": "affected",
"version": "bf25146a5595269810b1f47d048f114c5ff9f544",
"versionType": "git"
},
{
"lessThan": "a0fb59f527d03c60b2cd547cfae4a842ad84670f",
"status": "affected",
"version": "bf25146a5595269810b1f47d048f114c5ff9f544",
"versionType": "git"
},
{
"lessThan": "c7c790a07697148c41e2d03eb28efe132adda749",
"status": "affected",
"version": "bf25146a5595269810b1f47d048f114c5ff9f544",
"versionType": "git"
},
{
"lessThan": "98cd8b4d0b836d3edf70161f40efd9cbb8c8f252",
"status": "affected",
"version": "bf25146a5595269810b1f47d048f114c5ff9f544",
"versionType": "git"
},
{
"lessThan": "94b9da7e9f958cb3d115b21eff824ecd8c3217aa",
"status": "affected",
"version": "bf25146a5595269810b1f47d048f114c5ff9f544",
"versionType": "git"
},
{
"lessThan": "8821e857759be9db3cde337ad328b71fe5c8a55f",
"status": "affected",
"version": "bf25146a5595269810b1f47d048f114c5ff9f544",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"net/core/filter.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "5.18"
},
{
"lessThan": "5.18",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.167",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.130",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.77",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.17",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.19.*",
"status": "unaffected",
"version": "6.19.7",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.0",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.167",
"versionStartIncluding": "5.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.130",
"versionStartIncluding": "5.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.77",
"versionStartIncluding": "5.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.17",
"versionStartIncluding": "5.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.19.7",
"versionStartIncluding": "5.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0",
"versionStartIncluding": "5.18",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nxdp: produce a warning when calculated tailroom is negative\n\nMany ethernet drivers report xdp Rx queue frag size as being the same as\nDMA write size. However, the only user of this field, namely\nbpf_xdp_frags_increase_tail(), clearly expects a truesize.\n\nSuch difference leads to unspecific memory corruption issues under certain\ncircumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when\nrunning xskxceiver\u0027s XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses\nall DMA-writable space in 2 buffers. This would be fine, if only\nrxq-\u003efrag_size was properly set to 4K, but value of 3K results in a\nnegative tailroom, because there is a non-zero page offset.\n\nWe are supposed to return -EINVAL and be done with it in such case, but due\nto tailroom being stored as an unsigned int, it is reported to be somewhere\nnear UINT_MAX, resulting in a tail being grown, even if the requested\noffset is too much (it is around 2K in the abovementioned test). This later\nleads to all kinds of unspecific calltraces.\n\n[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6\n[ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4\n[ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000]\n[ 7340.339230] in xskxceiver[42b5,400000+69000]\n[ 7340.340300] likely on CPU 6 (core 0, socket 6)\n[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 \u003c4c\u003e 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe\n[ 7340.340888] likely on CPU 3 (core 0, socket 3)\n[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff \u003c8b\u003e 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7\n[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI\n[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)\n[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014\n[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80\n[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 \u003c8b\u003e 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89\n[ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202\n[ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010\n[ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff\n[ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0\n[ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0\n[ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500\n[ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000\n[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033\n[ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0\n[ 7340.421237] PKRU: 55555554\n[ 7340.421623] Call Trace:\n[ 7340.421987] \u003cTASK\u003e\n[ 7340.422309] ? softleaf_from_pte+0x77/0xa0\n[ 7340.422855] swap_pte_batch+0xa7/0x290\n[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270\n[ 7340.424102] zap_pte_range+0x281/0x580\n[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240\n[ 7340.425177] unmap_page_range+0x24d/0x420\n[ 7340.425714] unmap_vmas+0xa1/0x180\n[ 7340.426185] exit_mmap+0xe1/0x3b0\n[ 7340.426644] __mmput+0x41/0x150\n[ 7340.427098] exit_mm+0xb1/0x110\n[ 7340.427539] do_exit+0x1b2/0x460\n[ 7340.427992] do_group_exit+0x2d/0xc0\n[ 7340.428477] get_signal+0x79d/0x7e0\n[ 7340.428957] arch_do_signal_or_restart+0x34/0x100\n[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0\n[ 7340.430159] do_syscall_64+0x188/\n---truncated---"
}
],
"providerMetadata": {
"dateUpdated": "2026-05-11T22:05:00.366Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/01379540452a02bbc52f639d45dd365cd3624efb"
},
{
"url": "https://git.kernel.org/stable/c/a0fb59f527d03c60b2cd547cfae4a842ad84670f"
},
{
"url": "https://git.kernel.org/stable/c/c7c790a07697148c41e2d03eb28efe132adda749"
},
{
"url": "https://git.kernel.org/stable/c/98cd8b4d0b836d3edf70161f40efd9cbb8c8f252"
},
{
"url": "https://git.kernel.org/stable/c/94b9da7e9f958cb3d115b21eff824ecd8c3217aa"
},
{
"url": "https://git.kernel.org/stable/c/8821e857759be9db3cde337ad328b71fe5c8a55f"
}
],
"title": "xdp: produce a warning when calculated tailroom is negative",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-23343",
"datePublished": "2026-03-25T10:27:31.130Z",
"dateReserved": "2026-01-13T15:37:45.999Z",
"dateUpdated": "2026-11-10T12:42:38.108Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
}
}
Loading…
Loading…
Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline
Sightings and recorded dates, grouped by day · UTC
How durations are calculated
Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.
Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.
Loading timeline…
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.