CVE-2022-50375 (GCVE-0-2022-50375)

Vulnerability from cvelistv5 – Published: 2025-09-18 13:32 – Updated: 2026-05-11 19:18
VLAI
Title
tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown
Summary
In the Linux kernel, the following vulnerability has been resolved: tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown lpuart_dma_shutdown tears down lpuart dma, but lpuart_flush_buffer can still occur which in turn tries to access dma apis if lpuart_dma_tx_use flag is true. At this point since dma is torn down, these dma apis can abort. Set lpuart_dma_tx_use and the corresponding rx flag lpuart_dma_rx_use to false in lpuart_dma_shutdown so that dmas are not accessed after they are relinquished. Otherwise, when try to kill btattach, kernel may panic. This patch may fix this issue. root@imx8ulpevk:~# btattach -B /dev/ttyLP2 -S 115200 ^C[ 90.182296] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP [ 90.189806] Modules linked in: moal(O) mlan(O) [ 90.194258] CPU: 0 PID: 503 Comm: btattach Tainted: G O 5.15.32-06136-g34eecdf2f9e4 #37 [ 90.203554] Hardware name: NXP i.MX8ULP 9X9 EVK (DT) [ 90.208513] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 90.215470] pc : fsl_edma3_disable_request+0x8/0x60 [ 90.220358] lr : fsl_edma3_terminate_all+0x34/0x20c [ 90.225237] sp : ffff800013f0bac0 [ 90.228548] x29: ffff800013f0bac0 x28: 0000000000000001 x27: ffff000008404800 [ 90.235681] x26: ffff000008404960 x25: ffff000008404a08 x24: ffff000008404a00 [ 90.242813] x23: ffff000008404a60 x22: 0000000000000002 x21: 0000000000000000 [ 90.249946] x20: ffff800013f0baf8 x19: ffff00000559c800 x18: 0000000000000000 [ 90.257078] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 90.264211] x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000040 [ 90.271344] x11: ffff00000600c248 x10: ffff800013f0bb10 x9 : ffff000057bcb090 [ 90.278477] x8 : fffffc0000241a08 x7 : ffff00000534ee00 x6 : ffff000008404804 [ 90.285609] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff0000055b3480 [ 90.292742] x2 : ffff8000135c0000 x1 : ffff00000534ee00 x0 : ffff00000559c800 [ 90.299876] Call trace: [ 90.302321] fsl_edma3_disable_request+0x8/0x60 [ 90.306851] lpuart_flush_buffer+0x40/0x160 [ 90.311037] uart_flush_buffer+0x88/0x120 [ 90.315050] tty_driver_flush_buffer+0x20/0x30 [ 90.319496] hci_uart_flush+0x44/0x90 [ 90.323162] +0x34/0x12c [ 90.327253] tty_ldisc_close+0x38/0x70 [ 90.331005] tty_ldisc_release+0xa8/0x190 [ 90.335018] tty_release_struct+0x24/0x8c [ 90.339022] tty_release+0x3ec/0x4c0 [ 90.342593] __fput+0x70/0x234 [ 90.345652] ____fput+0x14/0x20 [ 90.348790] task_work_run+0x84/0x17c [ 90.352455] do_exit+0x310/0x96c [ 90.355688] do_group_exit+0x3c/0xa0 [ 90.359259] __arm64_sys_exit_group+0x1c/0x20 [ 90.363609] invoke_syscall+0x48/0x114 [ 90.367362] el0_svc_common.constprop.0+0xd4/0xfc [ 90.372068] do_el0_svc+0x2c/0x94 [ 90.375379] el0_svc+0x28/0x80 [ 90.378438] el0t_64_sync_handler+0xa8/0x130 [ 90.382711] el0t_64_sync+0x1a0/0x1a4 [ 90.386376] Code: 17ffffda d503201f d503233f f9409802 (b9400041) [ 90.392467] ---[ end trace 2f60524b4a43f1f6 ]--- [ 90.397073] note: btattach[503] exited with preempt_count 1 [ 90.402636] Fixing recursive fault but reboot is needed!
Severity
5.5 (Medium)
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
SSVC
Exploitation: none Automatable: no Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-01-14 18:46 UTC
CWE
Assigner
Linux CNA under the mitre root
CNA scorecard D 53/100 over 7067 records in the last 180 days details
References
Impacted products
Vendor Product Version CPE status
Linux Linux Affected: 6250cc30c4c4e25393ba247f71bdc04b6af3191b , < 29b897ac7b990882c74bd08605692214e7e58b83 (git)
Affected: 6250cc30c4c4e25393ba247f71bdc04b6af3191b , < 9a56ade124d4891a31ab1300c57665f07f5b24d5 (git)
Affected: 6250cc30c4c4e25393ba247f71bdc04b6af3191b , < c4293def8860fd587a84400ccba5b49cec56e2c3 (git)
Affected: 6250cc30c4c4e25393ba247f71bdc04b6af3191b , < d554c14eb73ee91d76fc9aece4616f0b687c295d (git)
Affected: 6250cc30c4c4e25393ba247f71bdc04b6af3191b , < 3953e7f261e2f4d9c35f0c025df9f166f46aa626 (git)
Affected: 6250cc30c4c4e25393ba247f71bdc04b6af3191b , < 316ae95c175a7d770d1bfe4c011192712f57aa4a (git)
guessed Create a notification for this product.
Linux Linux Affected: 4.9
Unaffected: 0 , < 4.9 (semver)
Unaffected: 5.4.220 , ≤ 5.4.* (semver)
Unaffected: 5.10.150 , ≤ 5.10.* (semver)
Unaffected: 5.15.75 , ≤ 5.15.* (semver)
Unaffected: 5.19.17 , ≤ 5.19.* (semver)
Unaffected: 6.0.3 , ≤ 6.0.* (semver)
Unaffected: 6.1 , ≤ * (original_commit_for_fix)
guessed Create a notification for this product.
Show details on NVD website
To clipboard 

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "cvssV3_1": {
              "attackComplexity": "LOW",
              "attackVector": "LOCAL",
              "availabilityImpact": "HIGH",
              "baseScore": 5.5,
              "baseSeverity": "MEDIUM",
              "confidentialityImpact": "NONE",
              "integrityImpact": "NONE",
              "privilegesRequired": "LOW",
              "scope": "UNCHANGED",
              "userInteraction": "NONE",
              "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
              "version": "3.1"
            }
          },
          {
            "other": {
              "content": {
                "id": "CVE-2022-50375",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-01-14T18:46:25.103854Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "problemTypes": [
          {
            "descriptions": [
              {
                "description": "CWE-noinfo Not enough information",
                "lang": "en",
                "type": "CWE"
              }
            ]
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-01-14T18:53:02.884Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/tty/serial/fsl_lpuart.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "29b897ac7b990882c74bd08605692214e7e58b83",
              "status": "affected",
              "version": "6250cc30c4c4e25393ba247f71bdc04b6af3191b",
              "versionType": "git"
            },
            {
              "lessThan": "9a56ade124d4891a31ab1300c57665f07f5b24d5",
              "status": "affected",
              "version": "6250cc30c4c4e25393ba247f71bdc04b6af3191b",
              "versionType": "git"
            },
            {
              "lessThan": "c4293def8860fd587a84400ccba5b49cec56e2c3",
              "status": "affected",
              "version": "6250cc30c4c4e25393ba247f71bdc04b6af3191b",
              "versionType": "git"
            },
            {
              "lessThan": "d554c14eb73ee91d76fc9aece4616f0b687c295d",
              "status": "affected",
              "version": "6250cc30c4c4e25393ba247f71bdc04b6af3191b",
              "versionType": "git"
            },
            {
              "lessThan": "3953e7f261e2f4d9c35f0c025df9f166f46aa626",
              "status": "affected",
              "version": "6250cc30c4c4e25393ba247f71bdc04b6af3191b",
              "versionType": "git"
            },
            {
              "lessThan": "316ae95c175a7d770d1bfe4c011192712f57aa4a",
              "status": "affected",
              "version": "6250cc30c4c4e25393ba247f71bdc04b6af3191b",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/tty/serial/fsl_lpuart.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "4.9"
            },
            {
              "lessThan": "4.9",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.4.*",
              "status": "unaffected",
              "version": "5.4.220",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.10.*",
              "status": "unaffected",
              "version": "5.10.150",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.15.*",
              "status": "unaffected",
              "version": "5.15.75",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.19.*",
              "status": "unaffected",
              "version": "5.19.17",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.0.*",
              "status": "unaffected",
              "version": "6.0.3",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "6.1",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.4.220",
                  "versionStartIncluding": "4.9",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.10.150",
                  "versionStartIncluding": "4.9",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.15.75",
                  "versionStartIncluding": "4.9",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.19.17",
                  "versionStartIncluding": "4.9",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.0.3",
                  "versionStartIncluding": "4.9",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.1",
                  "versionStartIncluding": "4.9",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ntty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown\n\nlpuart_dma_shutdown tears down lpuart dma, but lpuart_flush_buffer can\nstill occur which in turn tries to access dma apis if lpuart_dma_tx_use\nflag is true. At this point since dma is torn down, these dma apis can\nabort. Set lpuart_dma_tx_use and the corresponding rx flag\nlpuart_dma_rx_use to false in lpuart_dma_shutdown so that dmas are not\naccessed after they are relinquished.\n\nOtherwise, when try to kill btattach, kernel may panic. This patch may\nfix this issue.\nroot@imx8ulpevk:~# btattach -B /dev/ttyLP2 -S 115200\n^C[   90.182296] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP\n[   90.189806] Modules linked in: moal(O) mlan(O)\n[   90.194258] CPU: 0 PID: 503 Comm: btattach Tainted: G           O      5.15.32-06136-g34eecdf2f9e4 #37\n[   90.203554] Hardware name: NXP i.MX8ULP 9X9 EVK (DT)\n[   90.208513] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)\n[   90.215470] pc : fsl_edma3_disable_request+0x8/0x60\n[   90.220358] lr : fsl_edma3_terminate_all+0x34/0x20c\n[   90.225237] sp : ffff800013f0bac0\n[   90.228548] x29: ffff800013f0bac0 x28: 0000000000000001 x27: ffff000008404800\n[   90.235681] x26: ffff000008404960 x25: ffff000008404a08 x24: ffff000008404a00\n[   90.242813] x23: ffff000008404a60 x22: 0000000000000002 x21: 0000000000000000\n[   90.249946] x20: ffff800013f0baf8 x19: ffff00000559c800 x18: 0000000000000000\n[   90.257078] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000\n[   90.264211] x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000040\n[   90.271344] x11: ffff00000600c248 x10: ffff800013f0bb10 x9 : ffff000057bcb090\n[   90.278477] x8 : fffffc0000241a08 x7 : ffff00000534ee00 x6 : ffff000008404804\n[   90.285609] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff0000055b3480\n[   90.292742] x2 : ffff8000135c0000 x1 : ffff00000534ee00 x0 : ffff00000559c800\n[   90.299876] Call trace:\n[   90.302321]  fsl_edma3_disable_request+0x8/0x60\n[   90.306851]  lpuart_flush_buffer+0x40/0x160\n[   90.311037]  uart_flush_buffer+0x88/0x120\n[   90.315050]  tty_driver_flush_buffer+0x20/0x30\n[   90.319496]  hci_uart_flush+0x44/0x90\n[   90.323162]  +0x34/0x12c\n[   90.327253]  tty_ldisc_close+0x38/0x70\n[   90.331005]  tty_ldisc_release+0xa8/0x190\n[   90.335018]  tty_release_struct+0x24/0x8c\n[   90.339022]  tty_release+0x3ec/0x4c0\n[   90.342593]  __fput+0x70/0x234\n[   90.345652]  ____fput+0x14/0x20\n[   90.348790]  task_work_run+0x84/0x17c\n[   90.352455]  do_exit+0x310/0x96c\n[   90.355688]  do_group_exit+0x3c/0xa0\n[   90.359259]  __arm64_sys_exit_group+0x1c/0x20\n[   90.363609]  invoke_syscall+0x48/0x114\n[   90.367362]  el0_svc_common.constprop.0+0xd4/0xfc\n[   90.372068]  do_el0_svc+0x2c/0x94\n[   90.375379]  el0_svc+0x28/0x80\n[   90.378438]  el0t_64_sync_handler+0xa8/0x130\n[   90.382711]  el0t_64_sync+0x1a0/0x1a4\n[   90.386376] Code: 17ffffda d503201f d503233f f9409802 (b9400041)\n[   90.392467] ---[ end trace 2f60524b4a43f1f6 ]---\n[   90.397073] note: btattach[503] exited with preempt_count 1\n[   90.402636] Fixing recursive fault but reboot is needed!"
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-05-11T19:18:20.373Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/29b897ac7b990882c74bd08605692214e7e58b83"
        },
        {
          "url": "https://git.kernel.org/stable/c/9a56ade124d4891a31ab1300c57665f07f5b24d5"
        },
        {
          "url": "https://git.kernel.org/stable/c/c4293def8860fd587a84400ccba5b49cec56e2c3"
        },
        {
          "url": "https://git.kernel.org/stable/c/d554c14eb73ee91d76fc9aece4616f0b687c295d"
        },
        {
          "url": "https://git.kernel.org/stable/c/3953e7f261e2f4d9c35f0c025df9f166f46aa626"
        },
        {
          "url": "https://git.kernel.org/stable/c/316ae95c175a7d770d1bfe4c011192712f57aa4a"
        }
      ],
      "title": "tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2022-50375",
    "datePublished": "2025-09-18T13:32:58.361Z",
    "dateReserved": "2025-09-17T14:53:06.996Z",
    "dateUpdated": "2026-05-11T19:18:20.373Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2022-50375",
      "date": "2026-10-26",
      "epss": "0.0016",
      "percentile": "0.05088"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "defaultStatus": "unaffected",
                "product": "Linux",
                "programFiles": [
                  "drivers/tty/serial/fsl_lpuart.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "lessThan": "29b897ac7b990882c74bd08605692214e7e58b83",
                    "status": "affected",
                    "version": "6250cc30c4c4e25393ba247f71bdc04b6af3191b",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "9a56ade124d4891a31ab1300c57665f07f5b24d5",
                    "status": "affected",
                    "version": "6250cc30c4c4e25393ba247f71bdc04b6af3191b",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "c4293def8860fd587a84400ccba5b49cec56e2c3",
                    "status": "affected",
                    "version": "6250cc30c4c4e25393ba247f71bdc04b6af3191b",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "d554c14eb73ee91d76fc9aece4616f0b687c295d",
                    "status": "affected",
                    "version": "6250cc30c4c4e25393ba247f71bdc04b6af3191b",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "3953e7f261e2f4d9c35f0c025df9f166f46aa626",
                    "status": "affected",
                    "version": "6250cc30c4c4e25393ba247f71bdc04b6af3191b",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "316ae95c175a7d770d1bfe4c011192712f57aa4a",
                    "status": "affected",
                    "version": "6250cc30c4c4e25393ba247f71bdc04b6af3191b",
                    "versionType": "git"
                  }
                ]
              },
              {
                "defaultStatus": "affected",
                "product": "Linux",
                "programFiles": [
                  "drivers/tty/serial/fsl_lpuart.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "status": "affected",
                    "version": "4.9"
                  },
                  {
                    "lessThan": "4.9",
                    "status": "unaffected",
                    "version": "0",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "5.4.*",
                    "status": "unaffected",
                    "version": "5.4.220",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "5.10.*",
                    "status": "unaffected",
                    "version": "5.10.150",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "5.15.*",
                    "status": "unaffected",
                    "version": "5.15.75",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "5.19.*",
                    "status": "unaffected",
                    "version": "5.19.17",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.0.*",
                    "status": "unaffected",
                    "version": "6.0.3",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "*",
                    "status": "unaffected",
                    "version": "6.1",
                    "versionType": "original_commit_for_fix"
                  }
                ]
              }
            ],
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
          }
        ],
        "configurations": [
          {
            "nodes": [
              {
                "cpeMatch": [
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "D05A0EB9-6C7F-4991-8BD1-D66EE9637027",
                    "versionEndExcluding": "5.4.220",
                    "versionStartIncluding": "4.9",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "C495821C-2A71-4F09-BED8-6A6EB4C9BA27",
                    "versionEndExcluding": "5.10.150",
                    "versionStartIncluding": "5.5",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "6D945F46-F32F-4C09-8400-C3477E22A9FB",
                    "versionEndExcluding": "5.15.75",
                    "versionStartIncluding": "5.11",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "19B4C3A4-E5C3-41DC-BB14-BE72858E7D35",
                    "versionEndExcluding": "5.19.17",
                    "versionStartIncluding": "5.16",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "5BCD8201-B847-4442-B894-70D430128DEF",
                    "versionEndExcluding": "6.0.3",
                    "versionStartIncluding": "6.0",
                    "vulnerable": true
                  }
                ],
                "negate": false,
                "operator": "OR"
              }
            ]
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ntty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown\n\nlpuart_dma_shutdown tears down lpuart dma, but lpuart_flush_buffer can\nstill occur which in turn tries to access dma apis if lpuart_dma_tx_use\nflag is true. At this point since dma is torn down, these dma apis can\nabort. Set lpuart_dma_tx_use and the corresponding rx flag\nlpuart_dma_rx_use to false in lpuart_dma_shutdown so that dmas are not\naccessed after they are relinquished.\n\nOtherwise, when try to kill btattach, kernel may panic. This patch may\nfix this issue.\nroot@imx8ulpevk:~# btattach -B /dev/ttyLP2 -S 115200\n^C[   90.182296] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP\n[   90.189806] Modules linked in: moal(O) mlan(O)\n[   90.194258] CPU: 0 PID: 503 Comm: btattach Tainted: G           O      5.15.32-06136-g34eecdf2f9e4 #37\n[   90.203554] Hardware name: NXP i.MX8ULP 9X9 EVK (DT)\n[   90.208513] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)\n[   90.215470] pc : fsl_edma3_disable_request+0x8/0x60\n[   90.220358] lr : fsl_edma3_terminate_all+0x34/0x20c\n[   90.225237] sp : ffff800013f0bac0\n[   90.228548] x29: ffff800013f0bac0 x28: 0000000000000001 x27: ffff000008404800\n[   90.235681] x26: ffff000008404960 x25: ffff000008404a08 x24: ffff000008404a00\n[   90.242813] x23: ffff000008404a60 x22: 0000000000000002 x21: 0000000000000000\n[   90.249946] x20: ffff800013f0baf8 x19: ffff00000559c800 x18: 0000000000000000\n[   90.257078] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000\n[   90.264211] x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000040\n[   90.271344] x11: ffff00000600c248 x10: ffff800013f0bb10 x9 : ffff000057bcb090\n[   90.278477] x8 : fffffc0000241a08 x7 : ffff00000534ee00 x6 : ffff000008404804\n[   90.285609] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff0000055b3480\n[   90.292742] x2 : ffff8000135c0000 x1 : ffff00000534ee00 x0 : ffff00000559c800\n[   90.299876] Call trace:\n[   90.302321]  fsl_edma3_disable_request+0x8/0x60\n[   90.306851]  lpuart_flush_buffer+0x40/0x160\n[   90.311037]  uart_flush_buffer+0x88/0x120\n[   90.315050]  tty_driver_flush_buffer+0x20/0x30\n[   90.319496]  hci_uart_flush+0x44/0x90\n[   90.323162]  +0x34/0x12c\n[   90.327253]  tty_ldisc_close+0x38/0x70\n[   90.331005]  tty_ldisc_release+0xa8/0x190\n[   90.335018]  tty_release_struct+0x24/0x8c\n[   90.339022]  tty_release+0x3ec/0x4c0\n[   90.342593]  __fput+0x70/0x234\n[   90.345652]  ____fput+0x14/0x20\n[   90.348790]  task_work_run+0x84/0x17c\n[   90.352455]  do_exit+0x310/0x96c\n[   90.355688]  do_group_exit+0x3c/0xa0\n[   90.359259]  __arm64_sys_exit_group+0x1c/0x20\n[   90.363609]  invoke_syscall+0x48/0x114\n[   90.367362]  el0_svc_common.constprop.0+0xd4/0xfc\n[   90.372068]  do_el0_svc+0x2c/0x94\n[   90.375379]  el0_svc+0x28/0x80\n[   90.378438]  el0t_64_sync_handler+0xa8/0x130\n[   90.382711]  el0t_64_sync+0x1a0/0x1a4\n[   90.386376] Code: 17ffffda d503201f d503233f f9409802 (b9400041)\n[   90.392467] ---[ end trace 2f60524b4a43f1f6 ]---\n[   90.397073] note: btattach[503] exited with preempt_count 1\n[   90.402636] Fixing recursive fault but reboot is needed!"
          }
        ],
        "id": "CVE-2022-50375",
        "lastModified": "2026-06-17T05:23:22.370",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "LOW",
                "attackVector": "LOCAL",
                "availabilityImpact": "HIGH",
                "baseScore": 5.5,
                "baseSeverity": "MEDIUM",
                "confidentialityImpact": "NONE",
                "integrityImpact": "NONE",
                "privilegesRequired": "LOW",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
                "version": "3.1"
              },
              "exploitabilityScore": 1.8,
              "impactScore": 3.6,
              "source": "nvd@nist.gov",
              "type": "Primary"
            },
            {
              "cvssData": {
                "attackComplexity": "LOW",
                "attackVector": "LOCAL",
                "availabilityImpact": "HIGH",
                "baseScore": 5.5,
                "baseSeverity": "MEDIUM",
                "confidentialityImpact": "NONE",
                "integrityImpact": "NONE",
                "privilegesRequired": "LOW",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
                "version": "3.1"
              },
              "exploitabilityScore": 1.8,
              "impactScore": 3.6,
              "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "type": "Secondary"
            }
          ],
          "ssvcV203": [
            {
              "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "ssvcData": {
                "id": "CVE-2022-50375",
                "options": [
                  {
                    "exploitation": "none"
                  },
                  {
                    "automatable": "no"
                  },
                  {
                    "technicalImpact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-01-14T18:46:25.103854Z",
                "version": "2.0.3"
              }
            }
          ]
        },
        "published": "2025-09-18T14:15:36.110",
        "references": [
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/29b897ac7b990882c74bd08605692214e7e58b83"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/316ae95c175a7d770d1bfe4c011192712f57aa4a"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/3953e7f261e2f4d9c35f0c025df9f166f46aa626"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/9a56ade124d4891a31ab1300c57665f07f5b24d5"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/c4293def8860fd587a84400ccba5b49cec56e2c3"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/d554c14eb73ee91d76fc9aece4616f0b687c295d"
          }
        ],
        "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "vulnStatus": "Modified",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "NVD-CWE-noinfo"
              }
            ],
            "source": "nvd@nist.gov",
            "type": "Primary"
          }
        ]
      }
    },
    "redhat_vex": {
      "aggregate_severity": "Moderate",
      "current_release_date": "2026-06-29T21:49:00+00:00",
      "cve": "CVE-2022-50375",
      "id": "CVE-2022-50375",
      "initial_release_date": "2022-01-01T00:00:00+00:00",
      "product_status:known_affected": "108",
      "product_status:known_not_affected": "166",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2022/cve-2022-50375.json",
      "version": "3"
    },
    "vulnrichment": {
      "containers": {
        "adp": [
          {
            "metrics": [
              {
                "cvssV3_1": {
                  "attackComplexity": "LOW",
                  "attackVector": "LOCAL",
                  "availabilityImpact": "HIGH",
                  "baseScore": 5.5,
                  "baseSeverity": "MEDIUM",
                  "confidentialityImpact": "NONE",
                  "integrityImpact": "NONE",
                  "privilegesRequired": "LOW",
                  "scope": "UNCHANGED",
                  "userInteraction": "NONE",
                  "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
                  "version": "3.1"
                }
              },
              {
                "other": {
                  "content": {
                    "id": "CVE-2022-50375",
                    "options": [
                      {
                        "Exploitation": "none"
                      },
                      {
                        "Automatable": "no"
                      },
                      {
                        "Technical Impact": "partial"
                      }
                    ],
                    "role": "CISA Coordinator",
                    "timestamp": "2026-01-14T18:46:25.103854Z",
                    "version": "2.0.3"
                  },
                  "type": "ssvc"
                }
              }
            ],
            "problemTypes": [
              {
                "descriptions": [
                  {
                    "description": "CWE-noinfo Not enough information",
                    "lang": "en",
                    "type": "CWE"
                  }
                ]
              }
            ],
            "providerMetadata": {
              "dateUpdated": "2026-01-14T18:46:20.798Z",
              "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "shortName": "CISA-ADP"
            },
            "title": "CISA ADP Vulnrichment"
          }
        ],
        "cna": {
          "affected": [
            {
              "defaultStatus": "unaffected",
              "product": "Linux",
              "programFiles": [
                "drivers/tty/serial/fsl_lpuart.c"
              ],
              "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
              "vendor": "Linux",
              "versions": [
                {
                  "lessThan": "29b897ac7b990882c74bd08605692214e7e58b83",
                  "status": "affected",
                  "version": "6250cc30c4c4e25393ba247f71bdc04b6af3191b",
                  "versionType": "git"
                },
                {
                  "lessThan": "9a56ade124d4891a31ab1300c57665f07f5b24d5",
                  "status": "affected",
                  "version": "6250cc30c4c4e25393ba247f71bdc04b6af3191b",
                  "versionType": "git"
                },
                {
                  "lessThan": "c4293def8860fd587a84400ccba5b49cec56e2c3",
                  "status": "affected",
                  "version": "6250cc30c4c4e25393ba247f71bdc04b6af3191b",
                  "versionType": "git"
                },
                {
                  "lessThan": "d554c14eb73ee91d76fc9aece4616f0b687c295d",
                  "status": "affected",
                  "version": "6250cc30c4c4e25393ba247f71bdc04b6af3191b",
                  "versionType": "git"
                },
                {
                  "lessThan": "3953e7f261e2f4d9c35f0c025df9f166f46aa626",
                  "status": "affected",
                  "version": "6250cc30c4c4e25393ba247f71bdc04b6af3191b",
                  "versionType": "git"
                },
                {
                  "lessThan": "316ae95c175a7d770d1bfe4c011192712f57aa4a",
                  "status": "affected",
                  "version": "6250cc30c4c4e25393ba247f71bdc04b6af3191b",
                  "versionType": "git"
                }
              ]
            },
            {
              "defaultStatus": "affected",
              "product": "Linux",
              "programFiles": [
                "drivers/tty/serial/fsl_lpuart.c"
              ],
              "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
              "vendor": "Linux",
              "versions": [
                {
                  "status": "affected",
                  "version": "4.9"
                },
                {
                  "lessThan": "4.9",
                  "status": "unaffected",
                  "version": "0",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "5.4.*",
                  "status": "unaffected",
                  "version": "5.4.220",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "5.10.*",
                  "status": "unaffected",
                  "version": "5.10.150",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "5.15.*",
                  "status": "unaffected",
                  "version": "5.15.75",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "5.19.*",
                  "status": "unaffected",
                  "version": "5.19.17",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.0.*",
                  "status": "unaffected",
                  "version": "6.0.3",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "*",
                  "status": "unaffected",
                  "version": "6.1",
                  "versionType": "original_commit_for_fix"
                }
              ]
            }
          ],
          "cpeApplicability": [
            {
              "nodes": [
                {
                  "cpeMatch": [
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "5.4.220",
                      "versionStartIncluding": "4.9",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "5.10.150",
                      "versionStartIncluding": "4.9",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "5.15.75",
                      "versionStartIncluding": "4.9",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "5.19.17",
                      "versionStartIncluding": "4.9",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.0.3",
                      "versionStartIncluding": "4.9",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.1",
                      "versionStartIncluding": "4.9",
                      "vulnerable": true
                    }
                  ],
                  "negate": false,
                  "operator": "OR"
                }
              ]
            }
          ],
          "descriptions": [
            {
              "lang": "en",
              "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ntty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown\n\nlpuart_dma_shutdown tears down lpuart dma, but lpuart_flush_buffer can\nstill occur which in turn tries to access dma apis if lpuart_dma_tx_use\nflag is true. At this point since dma is torn down, these dma apis can\nabort. Set lpuart_dma_tx_use and the corresponding rx flag\nlpuart_dma_rx_use to false in lpuart_dma_shutdown so that dmas are not\naccessed after they are relinquished.\n\nOtherwise, when try to kill btattach, kernel may panic. This patch may\nfix this issue.\nroot@imx8ulpevk:~# btattach -B /dev/ttyLP2 -S 115200\n^C[   90.182296] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP\n[   90.189806] Modules linked in: moal(O) mlan(O)\n[   90.194258] CPU: 0 PID: 503 Comm: btattach Tainted: G           O      5.15.32-06136-g34eecdf2f9e4 #37\n[   90.203554] Hardware name: NXP i.MX8ULP 9X9 EVK (DT)\n[   90.208513] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)\n[   90.215470] pc : fsl_edma3_disable_request+0x8/0x60\n[   90.220358] lr : fsl_edma3_terminate_all+0x34/0x20c\n[   90.225237] sp : ffff800013f0bac0\n[   90.228548] x29: ffff800013f0bac0 x28: 0000000000000001 x27: ffff000008404800\n[   90.235681] x26: ffff000008404960 x25: ffff000008404a08 x24: ffff000008404a00\n[   90.242813] x23: ffff000008404a60 x22: 0000000000000002 x21: 0000000000000000\n[   90.249946] x20: ffff800013f0baf8 x19: ffff00000559c800 x18: 0000000000000000\n[   90.257078] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000\n[   90.264211] x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000040\n[   90.271344] x11: ffff00000600c248 x10: ffff800013f0bb10 x9 : ffff000057bcb090\n[   90.278477] x8 : fffffc0000241a08 x7 : ffff00000534ee00 x6 : ffff000008404804\n[   90.285609] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff0000055b3480\n[   90.292742] x2 : ffff8000135c0000 x1 : ffff00000534ee00 x0 : ffff00000559c800\n[   90.299876] Call trace:\n[   90.302321]  fsl_edma3_disable_request+0x8/0x60\n[   90.306851]  lpuart_flush_buffer+0x40/0x160\n[   90.311037]  uart_flush_buffer+0x88/0x120\n[   90.315050]  tty_driver_flush_buffer+0x20/0x30\n[   90.319496]  hci_uart_flush+0x44/0x90\n[   90.323162]  +0x34/0x12c\n[   90.327253]  tty_ldisc_close+0x38/0x70\n[   90.331005]  tty_ldisc_release+0xa8/0x190\n[   90.335018]  tty_release_struct+0x24/0x8c\n[   90.339022]  tty_release+0x3ec/0x4c0\n[   90.342593]  __fput+0x70/0x234\n[   90.345652]  ____fput+0x14/0x20\n[   90.348790]  task_work_run+0x84/0x17c\n[   90.352455]  do_exit+0x310/0x96c\n[   90.355688]  do_group_exit+0x3c/0xa0\n[   90.359259]  __arm64_sys_exit_group+0x1c/0x20\n[   90.363609]  invoke_syscall+0x48/0x114\n[   90.367362]  el0_svc_common.constprop.0+0xd4/0xfc\n[   90.372068]  do_el0_svc+0x2c/0x94\n[   90.375379]  el0_svc+0x28/0x80\n[   90.378438]  el0t_64_sync_handler+0xa8/0x130\n[   90.382711]  el0t_64_sync+0x1a0/0x1a4\n[   90.386376] Code: 17ffffda d503201f d503233f f9409802 (b9400041)\n[   90.392467] ---[ end trace 2f60524b4a43f1f6 ]---\n[   90.397073] note: btattach[503] exited with preempt_count 1\n[   90.402636] Fixing recursive fault but reboot is needed!"
            }
          ],
          "providerMetadata": {
            "dateUpdated": "2026-05-11T19:18:20.373Z",
            "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "shortName": "Linux"
          },
          "references": [
            {
              "url": "https://git.kernel.org/stable/c/29b897ac7b990882c74bd08605692214e7e58b83"
            },
            {
              "url": "https://git.kernel.org/stable/c/9a56ade124d4891a31ab1300c57665f07f5b24d5"
            },
            {
              "url": "https://git.kernel.org/stable/c/c4293def8860fd587a84400ccba5b49cec56e2c3"
            },
            {
              "url": "https://git.kernel.org/stable/c/d554c14eb73ee91d76fc9aece4616f0b687c295d"
            },
            {
              "url": "https://git.kernel.org/stable/c/3953e7f261e2f4d9c35f0c025df9f166f46aa626"
            },
            {
              "url": "https://git.kernel.org/stable/c/316ae95c175a7d770d1bfe4c011192712f57aa4a"
            }
          ],
          "title": "tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown",
          "x_generator": {
            "engine": "bippy-1.2.0"
          }
        }
      },
      "cveMetadata": {
        "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "assignerShortName": "Linux",
        "cveId": "CVE-2022-50375",
        "datePublished": "2025-09-18T13:32:58.361Z",
        "dateReserved": "2025-09-17T14:53:06.996Z",
        "dateUpdated": "2026-05-11T19:18:20.373Z",
        "state": "PUBLISHED"
      },
      "dataType": "CVE_RECORD",
      "dataVersion": "5.2"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON

Loading timeline…




    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.