CVE-2026-89482 (GCVE-0-2026-89482)
Vulnerability from cvelistv5 – Published: 2026-09-11 19:43 – Updated: 2026-10-19 08:47
VLAI
EPSS
VEX
Title
nvme-tcp: do not accept C2HData based on blk_rq_payload_bytes() alone
Summary
In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: do not accept C2HData based on blk_rq_payload_bytes() alone
Commit 25e5cb780e62 ("nvme-tcp: fix possible crash in write_zeroes
processing") established that blk_rq_payload_bytes() must not be read
without first checking blk_rq_nr_phys_segments(), and recorded the
result in nvme_tcp_setup_cmd_pdu() as req->data_len. The receive side
was left as it was.
The two differ for REQ_OP_WRITE_ZEROES, which has no physical segments
but a non-zero blk_rq_bytes(), so setup leaves req->iter untouched
while the receive gate lets a C2HData through and nvme_tcp_recv_data()
copies into whatever the previous command on that tag left there. The
driver-private area is zeroed only when the tag set is allocated.
Reproduced with a test target that leaves a residual iterator on a tag
and then sends a C2HData for a WRITE_ZEROES command on the same tag:
BUG: KASAN: wild-memory-access in _copy_to_iter+0x642/0x1330
Write of size 512 at addr ffe728c2175dfa81 by task kworker/0:1H/103
CPU: 0 UID: 0 PID: 103 Comm: kworker/0:1H Not tainted 7.2.0-rc5-NVMETCP-gf5098b6bae76 #1 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: nvme_tcp_wq nvme_tcp_io_work
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
kasan_report+0xce/0x100
? _copy_to_iter+0x642/0x1330
kasan_check_range+0x105/0x1b0
__asan_memcpy+0x3c/0x60
_copy_to_iter+0x642/0x1330
? __pfx_sock_has_perm+0x10/0x10
? worker_thread+0x45b/0xd10
? __pfx__copy_to_iter+0x10/0x10
? _raw_spin_lock_bh+0x83/0xe0
? __pfx__raw_spin_lock_bh+0x10/0x10
__skb_datagram_iter+0xf3/0x820
? __pfx_simple_copy_to_iter+0x10/0x10
? __asan_memcpy+0x3c/0x60
? skb_copy_bits+0x58d/0x830
skb_copy_datagram_iter+0x37/0x120
nvme_tcp_recv_skb+0xa07/0x4320
? __pfx_nvme_tcp_recv_skb+0x10/0x10
__tcp_read_sock+0x1ab/0x810
? __pfx_nvme_tcp_recv_skb+0x10/0x10
? __pfx_lock_sock_nested+0x10/0x10
? __pfx___tcp_read_sock+0x10/0x10
nvme_tcp_try_recv+0x152/0x1e0
? __pfx_nvme_tcp_try_recv+0x10/0x10
? __pfx_mutex_unlock+0x10/0x10
nvme_tcp_io_work+0x1e4/0x6c0
? __schedule+0x181a/0x49f0
? __pfx_nvme_tcp_io_work+0x10/0x10
process_one_work+0x633/0x1030
Keep the blk_rq_payload_bytes() test and add req->data_len to it. The
old test is what rejects a C2HData naming a tag that is no longer in
flight, because blk_update_request() zeroes rq->__data_len on
completion; req->data_len and req->curr_bio are driver-private and
survive completion, so they cannot stand in for it. Setup initialises
the iterator only when both req->curr_bio and req->data_len are set, so
the gate now tests the same two.
Severity
9.8 (Critical)
SSVC
Exploitation: none
Automatable: yes
Technical Impact: total
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-10-16 19:22 UTC
Assigner
References
8 references
Impacted products
2 products
| Vendor | Product | Version | CPE status | |
|---|---|---|---|---|
| Linux | Linux |
Affected:
25e5cb780e62bde432b401f312bb847edc78b432 , < 32ea8ce96b9bd797c59c351ce490ffd97adaa8c0
(git)
Affected: 25e5cb780e62bde432b401f312bb847edc78b432 , < dd8906bb8f8d5bf1c9f861e1382c82b87bfe7cab (git) Affected: 25e5cb780e62bde432b401f312bb847edc78b432 , < 7ed0b61bbc145988be292c4d3ec580aebd8d2bcd (git) Affected: 25e5cb780e62bde432b401f312bb847edc78b432 , < b96e1ff75e5c0ad6e077ac002b1d30b0a2b49528 (git) Affected: 25e5cb780e62bde432b401f312bb847edc78b432 , < b36161701cb366f416afdcf70771d432a7c74753 (git) Affected: 25e5cb780e62bde432b401f312bb847edc78b432 , < 6a01b58263108eaf9869bb6f82f07709240c6589 (git) Affected: 25e5cb780e62bde432b401f312bb847edc78b432 , < 641ad3a30ba560f0a9a610376c568d7b75d2a2aa (git) Affected: 25e5cb780e62bde432b401f312bb847edc78b432 , < 3a4aa9e6ad3e35f8e24d5eaf38ee4d437075fb36 (git) Affected: f507ae6e33cbe56c4e3fe000434fc0ecc263d098 (git) Affected: b1458c16f4e26e87492e58e4d24a1873bd09232a (git) Affected: 5.4.36 , < 5.5 (semver) Affected: 5.6.8 , < 5.7 (semver) |
guessed | |
| Linux | Linux |
Affected:
5.7
Unaffected: 0 , < 5.7 (semver) Unaffected: 5.10.270 , ≤ 5.10.* (semver) Unaffected: 5.15.221 , ≤ 5.15.* (semver) Unaffected: 6.1.188 , ≤ 6.1.* (semver) Unaffected: 6.6.157 , ≤ 6.6.* (semver) Unaffected: 6.12.109 , ≤ 6.12.* (semver) Unaffected: 6.18.50 , ≤ 6.18.* (semver) Unaffected: 7.2.4 , ≤ 7.2.* (semver) Unaffected: 7.3 , ≤ * (original_commit_for_fix) |
guessed |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-89482",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-16T19:22:37.965026Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-10-16T19:26:39.839Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/nvme/host/tcp.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "32ea8ce96b9bd797c59c351ce490ffd97adaa8c0",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "dd8906bb8f8d5bf1c9f861e1382c82b87bfe7cab",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "7ed0b61bbc145988be292c4d3ec580aebd8d2bcd",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "b96e1ff75e5c0ad6e077ac002b1d30b0a2b49528",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "b36161701cb366f416afdcf70771d432a7c74753",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "6a01b58263108eaf9869bb6f82f07709240c6589",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "641ad3a30ba560f0a9a610376c568d7b75d2a2aa",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "3a4aa9e6ad3e35f8e24d5eaf38ee4d437075fb36",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"status": "affected",
"version": "f507ae6e33cbe56c4e3fe000434fc0ecc263d098",
"versionType": "git"
},
{
"status": "affected",
"version": "b1458c16f4e26e87492e58e4d24a1873bd09232a",
"versionType": "git"
},
{
"lessThan": "5.5",
"status": "affected",
"version": "5.4.36",
"versionType": "semver"
},
{
"lessThan": "5.7",
"status": "affected",
"version": "5.6.8",
"versionType": "semver"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/nvme/host/tcp.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "5.7"
},
{
"lessThan": "5.7",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.270",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.221",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.188",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.157",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.109",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.50",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.2.*",
"status": "unaffected",
"version": "7.2.4",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.3",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.270",
"versionStartIncluding": "5.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.221",
"versionStartIncluding": "5.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.188",
"versionStartIncluding": "5.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.157",
"versionStartIncluding": "5.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.109",
"versionStartIncluding": "5.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.50",
"versionStartIncluding": "5.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.2.4",
"versionStartIncluding": "5.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.3",
"versionStartIncluding": "5.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "5.4.36",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "5.6.8",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnvme-tcp: do not accept C2HData based on blk_rq_payload_bytes() alone\n\nCommit 25e5cb780e62 (\"nvme-tcp: fix possible crash in write_zeroes\nprocessing\") established that blk_rq_payload_bytes() must not be read\nwithout first checking blk_rq_nr_phys_segments(), and recorded the\nresult in nvme_tcp_setup_cmd_pdu() as req-\u003edata_len. The receive side\nwas left as it was.\n\nThe two differ for REQ_OP_WRITE_ZEROES, which has no physical segments\nbut a non-zero blk_rq_bytes(), so setup leaves req-\u003eiter untouched\nwhile the receive gate lets a C2HData through and nvme_tcp_recv_data()\ncopies into whatever the previous command on that tag left there. The\ndriver-private area is zeroed only when the tag set is allocated.\n\nReproduced with a test target that leaves a residual iterator on a tag\nand then sends a C2HData for a WRITE_ZEROES command on the same tag:\n\nBUG: KASAN: wild-memory-access in _copy_to_iter+0x642/0x1330\nWrite of size 512 at addr ffe728c2175dfa81 by task kworker/0:1H/103\n\nCPU: 0 UID: 0 PID: 103 Comm: kworker/0:1H Not tainted 7.2.0-rc5-NVMETCP-gf5098b6bae76 #1 PREEMPT(lazy)\nHardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014\nWorkqueue: nvme_tcp_wq nvme_tcp_io_work\nCall Trace:\n \u003cTASK\u003e\n dump_stack_lvl+0x53/0x70\n kasan_report+0xce/0x100\n ? _copy_to_iter+0x642/0x1330\n kasan_check_range+0x105/0x1b0\n __asan_memcpy+0x3c/0x60\n _copy_to_iter+0x642/0x1330\n ? __pfx_sock_has_perm+0x10/0x10\n ? worker_thread+0x45b/0xd10\n ? __pfx__copy_to_iter+0x10/0x10\n ? _raw_spin_lock_bh+0x83/0xe0\n ? __pfx__raw_spin_lock_bh+0x10/0x10\n __skb_datagram_iter+0xf3/0x820\n ? __pfx_simple_copy_to_iter+0x10/0x10\n ? __asan_memcpy+0x3c/0x60\n ? skb_copy_bits+0x58d/0x830\n skb_copy_datagram_iter+0x37/0x120\n nvme_tcp_recv_skb+0xa07/0x4320\n ? __pfx_nvme_tcp_recv_skb+0x10/0x10\n __tcp_read_sock+0x1ab/0x810\n ? __pfx_nvme_tcp_recv_skb+0x10/0x10\n ? __pfx_lock_sock_nested+0x10/0x10\n ? __pfx___tcp_read_sock+0x10/0x10\n nvme_tcp_try_recv+0x152/0x1e0\n ? __pfx_nvme_tcp_try_recv+0x10/0x10\n ? __pfx_mutex_unlock+0x10/0x10\n nvme_tcp_io_work+0x1e4/0x6c0\n ? __schedule+0x181a/0x49f0\n ? __pfx_nvme_tcp_io_work+0x10/0x10\n process_one_work+0x633/0x1030\n\nKeep the blk_rq_payload_bytes() test and add req-\u003edata_len to it. The\nold test is what rejects a C2HData naming a tag that is no longer in\nflight, because blk_update_request() zeroes rq-\u003e__data_len on\ncompletion; req-\u003edata_len and req-\u003ecurr_bio are driver-private and\nsurvive completion, so they cannot stand in for it. Setup initialises\nthe iterator only when both req-\u003ecurr_bio and req-\u003edata_len are set, so\nthe gate now tests the same two."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:N - The nvme-tcp host receive path parses C2HData PDUs from a remote NVMe/TCP target over a routable TCP connection (typically port 4420); a malicious or compromised target, or an on-path attacker injecting into the stream, triggers the bug from the network.\nAC:L - A malicious target can advertise WRITE_ZEROES, wait for tag reuse after a data command, and send C2HData for that in-flight WRITE_ZEROES; leftover iterator state is deterministic because driver-private fields are not cleared on reuse, so no race or memory-layout luck is required.\nPR:N - NVMe/TCP authentication (TLS, DH-HMAC-CHAP) is optional and off by default; the vulnerable copy runs on C2HData from the connected peer, which needs no credentials or privileges on the victim host.\nUI:N - Once the host is connected to the target as persistent storage, ordinary filesystem and block I/O generate WRITE_ZEROES commands; the attacker sends the crafted PDU without any further victim action.\nS:U - The stale-iterator write corrupts memory in the same host kernel security authority; this is not a VM, IOMMU, or sandbox boundary crossing.\nC:H - nvme_tcp_recv_data() writes attacker-controlled C2HData through a leftover iov_iter into pages from a previously completed command on the same tag, a use-after-free of those buffers that can be turned into an arbitrary read via heap reuse.\nI:H - The copy is a use-after-free / wild write of attacker-chosen contents and length into reused kernel or page-cache memory, which is exploitable for arbitrary write and control-flow hijacking.\nA:H - The same stale-iterator write was reproduced as a KASAN wild-memory-access in _copy_to_iter from nvme_tcp_io_work and can oops or panic the host kernel."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-19T08:47:32.356Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/32ea8ce96b9bd797c59c351ce490ffd97adaa8c0"
},
{
"url": "https://git.kernel.org/stable/c/dd8906bb8f8d5bf1c9f861e1382c82b87bfe7cab"
},
{
"url": "https://git.kernel.org/stable/c/7ed0b61bbc145988be292c4d3ec580aebd8d2bcd"
},
{
"url": "https://git.kernel.org/stable/c/b96e1ff75e5c0ad6e077ac002b1d30b0a2b49528"
},
{
"url": "https://git.kernel.org/stable/c/b36161701cb366f416afdcf70771d432a7c74753"
},
{
"url": "https://git.kernel.org/stable/c/6a01b58263108eaf9869bb6f82f07709240c6589"
},
{
"url": "https://git.kernel.org/stable/c/641ad3a30ba560f0a9a610376c568d7b75d2a2aa"
},
{
"url": "https://git.kernel.org/stable/c/3a4aa9e6ad3e35f8e24d5eaf38ee4d437075fb36"
}
],
"title": "nvme-tcp: do not accept C2HData based on blk_rq_payload_bytes() alone",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-89482",
"datePublished": "2026-09-11T19:43:37.236Z",
"dateReserved": "2026-09-11T19:38:34.712Z",
"dateUpdated": "2026-10-19T08:47:32.356Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-89482",
"date": "2026-11-01",
"epss": "0.00714",
"percentile": "0.53691"
},
"microsoft_vex": {
"current_release_date": "2026-09-25T01:53:26.000Z",
"cve": "CVE-2026-89482",
"id": "msrc_CVE-2026-89482",
"initial_release_date": "2026-09-13T01:04:57.000Z",
"product_status:fixed": "1",
"product_status:known_affected": "2",
"source": "Microsoft CSAF VEX",
"status": "final",
"title": "nvme-tcp: do not accept C2HData based on blk_rq_payload_bytes() alone",
"url": "https://msrc.microsoft.com/csaf/vex/2026/msrc_cve-2026-89482.json",
"version": "5"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/nvme/host/tcp.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "32ea8ce96b9bd797c59c351ce490ffd97adaa8c0",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "dd8906bb8f8d5bf1c9f861e1382c82b87bfe7cab",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "7ed0b61bbc145988be292c4d3ec580aebd8d2bcd",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "b96e1ff75e5c0ad6e077ac002b1d30b0a2b49528",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "b36161701cb366f416afdcf70771d432a7c74753",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "6a01b58263108eaf9869bb6f82f07709240c6589",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "641ad3a30ba560f0a9a610376c568d7b75d2a2aa",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "3a4aa9e6ad3e35f8e24d5eaf38ee4d437075fb36",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"status": "affected",
"version": "f507ae6e33cbe56c4e3fe000434fc0ecc263d098",
"versionType": "git"
},
{
"status": "affected",
"version": "b1458c16f4e26e87492e58e4d24a1873bd09232a",
"versionType": "git"
},
{
"lessThan": "5.5",
"status": "affected",
"version": "5.4.36",
"versionType": "semver"
},
{
"lessThan": "5.7",
"status": "affected",
"version": "5.6.8",
"versionType": "semver"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/nvme/host/tcp.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "5.7"
},
{
"lessThan": "5.7",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.270",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.221",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.188",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.157",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.109",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.50",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.2.*",
"status": "unaffected",
"version": "7.2.4",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.3",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnvme-tcp: do not accept C2HData based on blk_rq_payload_bytes() alone\n\nCommit 25e5cb780e62 (\"nvme-tcp: fix possible crash in write_zeroes\nprocessing\") established that blk_rq_payload_bytes() must not be read\nwithout first checking blk_rq_nr_phys_segments(), and recorded the\nresult in nvme_tcp_setup_cmd_pdu() as req-\u003edata_len. The receive side\nwas left as it was.\n\nThe two differ for REQ_OP_WRITE_ZEROES, which has no physical segments\nbut a non-zero blk_rq_bytes(), so setup leaves req-\u003eiter untouched\nwhile the receive gate lets a C2HData through and nvme_tcp_recv_data()\ncopies into whatever the previous command on that tag left there. The\ndriver-private area is zeroed only when the tag set is allocated.\n\nReproduced with a test target that leaves a residual iterator on a tag\nand then sends a C2HData for a WRITE_ZEROES command on the same tag:\n\nBUG: KASAN: wild-memory-access in _copy_to_iter+0x642/0x1330\nWrite of size 512 at addr ffe728c2175dfa81 by task kworker/0:1H/103\n\nCPU: 0 UID: 0 PID: 103 Comm: kworker/0:1H Not tainted 7.2.0-rc5-NVMETCP-gf5098b6bae76 #1 PREEMPT(lazy)\nHardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014\nWorkqueue: nvme_tcp_wq nvme_tcp_io_work\nCall Trace:\n \u003cTASK\u003e\n dump_stack_lvl+0x53/0x70\n kasan_report+0xce/0x100\n ? _copy_to_iter+0x642/0x1330\n kasan_check_range+0x105/0x1b0\n __asan_memcpy+0x3c/0x60\n _copy_to_iter+0x642/0x1330\n ? __pfx_sock_has_perm+0x10/0x10\n ? worker_thread+0x45b/0xd10\n ? __pfx__copy_to_iter+0x10/0x10\n ? _raw_spin_lock_bh+0x83/0xe0\n ? __pfx__raw_spin_lock_bh+0x10/0x10\n __skb_datagram_iter+0xf3/0x820\n ? __pfx_simple_copy_to_iter+0x10/0x10\n ? __asan_memcpy+0x3c/0x60\n ? skb_copy_bits+0x58d/0x830\n skb_copy_datagram_iter+0x37/0x120\n nvme_tcp_recv_skb+0xa07/0x4320\n ? __pfx_nvme_tcp_recv_skb+0x10/0x10\n __tcp_read_sock+0x1ab/0x810\n ? __pfx_nvme_tcp_recv_skb+0x10/0x10\n ? __pfx_lock_sock_nested+0x10/0x10\n ? __pfx___tcp_read_sock+0x10/0x10\n nvme_tcp_try_recv+0x152/0x1e0\n ? __pfx_nvme_tcp_try_recv+0x10/0x10\n ? __pfx_mutex_unlock+0x10/0x10\n nvme_tcp_io_work+0x1e4/0x6c0\n ? __schedule+0x181a/0x49f0\n ? __pfx_nvme_tcp_io_work+0x10/0x10\n process_one_work+0x633/0x1030\n\nKeep the blk_rq_payload_bytes() test and add req-\u003edata_len to it. The\nold test is what rejects a C2HData naming a tag that is no longer in\nflight, because blk_update_request() zeroes rq-\u003e__data_len on\ncompletion; req-\u003edata_len and req-\u003ecurr_bio are driver-private and\nsurvive completion, so they cannot stand in for it. Setup initialises\nthe iterator only when both req-\u003ecurr_bio and req-\u003edata_len are set, so\nthe gate now tests the same two."
}
],
"id": "CVE-2026-89482",
"lastModified": "2026-10-19T09:17:41.540",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"exploitabilityScore": 3.9,
"impactScore": 5.9,
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"type": "Secondary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2026-89482",
"options": [
{
"exploitation": "none"
},
{
"automatable": "yes"
},
{
"technicalImpact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-16T19:22:37.965026Z",
"version": "2.0.3"
}
}
]
},
"published": "2026-09-11T20:19:29.730",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/32ea8ce96b9bd797c59c351ce490ffd97adaa8c0"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/3a4aa9e6ad3e35f8e24d5eaf38ee4d437075fb36"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/641ad3a30ba560f0a9a610376c568d7b75d2a2aa"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/6a01b58263108eaf9869bb6f82f07709240c6589"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/7ed0b61bbc145988be292c4d3ec580aebd8d2bcd"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/b36161701cb366f416afdcf70771d432a7c74753"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/b96e1ff75e5c0ad6e077ac002b1d30b0a2b49528"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"url": "https://git.kernel.org/stable/c/dd8906bb8f8d5bf1c9f861e1382c82b87bfe7cab"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Received"
}
},
"redhat_vex": {
"aggregate_severity": "Moderate",
"current_release_date": "2026-10-24T01:35:31+00:00",
"cve": "CVE-2026-89482",
"id": "CVE-2026-89482",
"initial_release_date": "2026-09-11T00:00:00+00:00",
"product_status:known_affected": "236",
"product_status:known_not_affected": "42",
"source": "Red Hat CSAF VEX",
"status": "final",
"title": "kernel: nvme-tcp: do not accept C2HData based on blk_rq_payload_bytes() alone",
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-89482.json",
"version": "3"
},
"vulnrichment": {
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-89482",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-16T19:22:37.965026Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-10-16T19:22:38.509Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/nvme/host/tcp.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "32ea8ce96b9bd797c59c351ce490ffd97adaa8c0",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "dd8906bb8f8d5bf1c9f861e1382c82b87bfe7cab",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "7ed0b61bbc145988be292c4d3ec580aebd8d2bcd",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "b96e1ff75e5c0ad6e077ac002b1d30b0a2b49528",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "b36161701cb366f416afdcf70771d432a7c74753",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "6a01b58263108eaf9869bb6f82f07709240c6589",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "641ad3a30ba560f0a9a610376c568d7b75d2a2aa",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"lessThan": "3a4aa9e6ad3e35f8e24d5eaf38ee4d437075fb36",
"status": "affected",
"version": "25e5cb780e62bde432b401f312bb847edc78b432",
"versionType": "git"
},
{
"status": "affected",
"version": "f507ae6e33cbe56c4e3fe000434fc0ecc263d098",
"versionType": "git"
},
{
"status": "affected",
"version": "b1458c16f4e26e87492e58e4d24a1873bd09232a",
"versionType": "git"
},
{
"lessThan": "5.5",
"status": "affected",
"version": "5.4.36",
"versionType": "semver"
},
{
"lessThan": "5.7",
"status": "affected",
"version": "5.6.8",
"versionType": "semver"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/nvme/host/tcp.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "5.7"
},
{
"lessThan": "5.7",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.270",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.221",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.188",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.157",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.109",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.50",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.2.*",
"status": "unaffected",
"version": "7.2.4",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.3",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.270",
"versionStartIncluding": "5.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.221",
"versionStartIncluding": "5.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.188",
"versionStartIncluding": "5.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.157",
"versionStartIncluding": "5.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.109",
"versionStartIncluding": "5.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.50",
"versionStartIncluding": "5.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.2.4",
"versionStartIncluding": "5.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.3",
"versionStartIncluding": "5.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "5.4.36",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "5.6.8",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnvme-tcp: do not accept C2HData based on blk_rq_payload_bytes() alone\n\nCommit 25e5cb780e62 (\"nvme-tcp: fix possible crash in write_zeroes\nprocessing\") established that blk_rq_payload_bytes() must not be read\nwithout first checking blk_rq_nr_phys_segments(), and recorded the\nresult in nvme_tcp_setup_cmd_pdu() as req-\u003edata_len. The receive side\nwas left as it was.\n\nThe two differ for REQ_OP_WRITE_ZEROES, which has no physical segments\nbut a non-zero blk_rq_bytes(), so setup leaves req-\u003eiter untouched\nwhile the receive gate lets a C2HData through and nvme_tcp_recv_data()\ncopies into whatever the previous command on that tag left there. The\ndriver-private area is zeroed only when the tag set is allocated.\n\nReproduced with a test target that leaves a residual iterator on a tag\nand then sends a C2HData for a WRITE_ZEROES command on the same tag:\n\nBUG: KASAN: wild-memory-access in _copy_to_iter+0x642/0x1330\nWrite of size 512 at addr ffe728c2175dfa81 by task kworker/0:1H/103\n\nCPU: 0 UID: 0 PID: 103 Comm: kworker/0:1H Not tainted 7.2.0-rc5-NVMETCP-gf5098b6bae76 #1 PREEMPT(lazy)\nHardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014\nWorkqueue: nvme_tcp_wq nvme_tcp_io_work\nCall Trace:\n \u003cTASK\u003e\n dump_stack_lvl+0x53/0x70\n kasan_report+0xce/0x100\n ? _copy_to_iter+0x642/0x1330\n kasan_check_range+0x105/0x1b0\n __asan_memcpy+0x3c/0x60\n _copy_to_iter+0x642/0x1330\n ? __pfx_sock_has_perm+0x10/0x10\n ? worker_thread+0x45b/0xd10\n ? __pfx__copy_to_iter+0x10/0x10\n ? _raw_spin_lock_bh+0x83/0xe0\n ? __pfx__raw_spin_lock_bh+0x10/0x10\n __skb_datagram_iter+0xf3/0x820\n ? __pfx_simple_copy_to_iter+0x10/0x10\n ? __asan_memcpy+0x3c/0x60\n ? skb_copy_bits+0x58d/0x830\n skb_copy_datagram_iter+0x37/0x120\n nvme_tcp_recv_skb+0xa07/0x4320\n ? __pfx_nvme_tcp_recv_skb+0x10/0x10\n __tcp_read_sock+0x1ab/0x810\n ? __pfx_nvme_tcp_recv_skb+0x10/0x10\n ? __pfx_lock_sock_nested+0x10/0x10\n ? __pfx___tcp_read_sock+0x10/0x10\n nvme_tcp_try_recv+0x152/0x1e0\n ? __pfx_nvme_tcp_try_recv+0x10/0x10\n ? __pfx_mutex_unlock+0x10/0x10\n nvme_tcp_io_work+0x1e4/0x6c0\n ? __schedule+0x181a/0x49f0\n ? __pfx_nvme_tcp_io_work+0x10/0x10\n process_one_work+0x633/0x1030\n\nKeep the blk_rq_payload_bytes() test and add req-\u003edata_len to it. The\nold test is what rejects a C2HData naming a tag that is no longer in\nflight, because blk_update_request() zeroes rq-\u003e__data_len on\ncompletion; req-\u003edata_len and req-\u003ecurr_bio are driver-private and\nsurvive completion, so they cannot stand in for it. Setup initialises\nthe iterator only when both req-\u003ecurr_bio and req-\u003edata_len are set, so\nthe gate now tests the same two."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:N - The nvme-tcp host receive path parses C2HData PDUs from a remote NVMe/TCP target over a routable TCP connection (typically port 4420); a malicious or compromised target, or an on-path attacker injecting into the stream, triggers the bug from the network.\nAC:L - A malicious target can advertise WRITE_ZEROES, wait for tag reuse after a data command, and send C2HData for that in-flight WRITE_ZEROES; leftover iterator state is deterministic because driver-private fields are not cleared on reuse, so no race or memory-layout luck is required.\nPR:N - NVMe/TCP authentication (TLS, DH-HMAC-CHAP) is optional and off by default; the vulnerable copy runs on C2HData from the connected peer, which needs no credentials or privileges on the victim host.\nUI:N - Once the host is connected to the target as persistent storage, ordinary filesystem and block I/O generate WRITE_ZEROES commands; the attacker sends the crafted PDU without any further victim action.\nS:U - The stale-iterator write corrupts memory in the same host kernel security authority; this is not a VM, IOMMU, or sandbox boundary crossing.\nC:H - nvme_tcp_recv_data() writes attacker-controlled C2HData through a leftover iov_iter into pages from a previously completed command on the same tag, a use-after-free of those buffers that can be turned into an arbitrary read via heap reuse.\nI:H - The copy is a use-after-free / wild write of attacker-chosen contents and length into reused kernel or page-cache memory, which is exploitable for arbitrary write and control-flow hijacking.\nA:H - The same stale-iterator write was reproduced as a KASAN wild-memory-access in _copy_to_iter from nvme_tcp_io_work and can oops or panic the host kernel."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-19T08:47:32.356Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/32ea8ce96b9bd797c59c351ce490ffd97adaa8c0"
},
{
"url": "https://git.kernel.org/stable/c/dd8906bb8f8d5bf1c9f861e1382c82b87bfe7cab"
},
{
"url": "https://git.kernel.org/stable/c/7ed0b61bbc145988be292c4d3ec580aebd8d2bcd"
},
{
"url": "https://git.kernel.org/stable/c/b96e1ff75e5c0ad6e077ac002b1d30b0a2b49528"
},
{
"url": "https://git.kernel.org/stable/c/b36161701cb366f416afdcf70771d432a7c74753"
},
{
"url": "https://git.kernel.org/stable/c/6a01b58263108eaf9869bb6f82f07709240c6589"
},
{
"url": "https://git.kernel.org/stable/c/641ad3a30ba560f0a9a610376c568d7b75d2a2aa"
},
{
"url": "https://git.kernel.org/stable/c/3a4aa9e6ad3e35f8e24d5eaf38ee4d437075fb36"
}
],
"title": "nvme-tcp: do not accept C2HData based on blk_rq_payload_bytes() alone",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-89482",
"datePublished": "2026-09-11T19:43:37.236Z",
"dateReserved": "2026-09-11T19:38:34.712Z",
"dateUpdated": "2026-10-19T08:47:32.356Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
}
}
Loading…
Loading…
Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline
Sightings and recorded dates, grouped by day · UTC
Loading timeline…
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.