CVE-2026-31465 (GCVE-0-2026-31465)

Vulnerability from cvelistv5 – Published: 2026-04-22 13:53 – Updated: 2026-05-11 22:09
VLAI
Title
writeback: don't block sync for filesystems with no data integrity guarantees
Summary
In the Linux kernel, the following vulnerability has been resolved: writeback: don't block sync for filesystems with no data integrity guarantees Add a SB_I_NO_DATA_INTEGRITY superblock flag for filesystems that cannot guarantee data persistence on sync (eg fuse). For superblocks with this flag set, sync kicks off writeback of dirty inodes but does not wait for the flusher threads to complete the writeback. This replaces the per-inode AS_NO_DATA_INTEGRITY mapping flag added in commit f9a49aa302a0 ("fs/writeback: skip AS_NO_DATA_INTEGRITY mappings in wait_sb_inodes()"). The flag belongs at the superblock level because data integrity is a filesystem-wide property, not a per-inode one. Having this flag at the superblock level also allows us to skip having to iterate every dirty inode in wait_sb_inodes() only to skip each inode individually. Prior to this commit, mappings with no data integrity guarantees skipped waiting on writeback completion but still waited on the flusher threads to finish initiating the writeback. Waiting on the flusher threads is unnecessary. This commit kicks off writeback but does not wait on the flusher threads. This change properly addresses a recent report [1] for a suspend-to-RAM hang seen on fuse-overlayfs that was caused by waiting on the flusher threads to finish: Workqueue: pm_fs_sync pm_fs_sync_work_fn Call Trace: <TASK> __schedule+0x457/0x1720 schedule+0x27/0xd0 wb_wait_for_completion+0x97/0xe0 sync_inodes_sb+0xf8/0x2e0 __iterate_supers+0xdc/0x160 ksys_sync+0x43/0xb0 pm_fs_sync_work_fn+0x17/0xa0 process_one_work+0x193/0x350 worker_thread+0x1a1/0x310 kthread+0xfc/0x240 ret_from_fork+0x243/0x280 ret_from_fork_asm+0x1a/0x30 </TASK> On fuse this is problematic because there are paths that may cause the flusher thread to block (eg if systemd freezes the user session cgroups first, which freezes the fuse daemon, before invoking the kernel suspend. The kernel suspend triggers ->write_node() which on fuse issues a synchronous setattr request, which cannot be processed since the daemon is frozen. Or if the daemon is buggy and cannot properly complete writeback, initiating writeback on a dirty folio already under writeback leads to writeback_get_folio() -> folio_prepare_writeback() -> unconditional wait on writeback to finish, which will cause a hang). This commit restores fuse to its prior behavior before tmp folios were removed, where sync was essentially a no-op. [1] https://lore.kernel.org/linux-fsdevel/CAJnrk1a-asuvfrbKXbEwwDSctvemF+6zfhdnuzO65Pt8HsFSRw@mail.gmail.com/T/#m632c4648e9cafc4239299887109ebd880ac6c5c1
Assigner
Linux CNA under the mitre root
CNA scorecard D 53/100 over 7143 records in the last 180 days details
Impacted products
Vendor Product Version CPE status
Linux Linux Affected: 0c58a97f919c24fe4245015f4375a39ff05665b6 , < 83800f8ef358ea2fc9b1ae4986b83f2bc24be927 (git)
Affected: 0c58a97f919c24fe4245015f4375a39ff05665b6 , < 5c24a13d8a0466ca0446e58309e51f2606520164 (git)
Affected: 0c58a97f919c24fe4245015f4375a39ff05665b6 , < 76f9377cd2ab7a9220c25d33940d9ca20d368172 (git)
guessed Create a notification for this product.
Linux Linux Affected: 6.16
Unaffected: 0 , < 6.16 (semver)
Unaffected: 6.18.21 , ≤ 6.18.* (semver)
Unaffected: 6.19.11 , ≤ 6.19.* (semver)
Unaffected: 7.0 , ≤ * (original_commit_for_fix)
guessed Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "fs/fs-writeback.c",
            "fs/fuse/file.c",
            "fs/fuse/inode.c",
            "include/linux/fs/super_types.h",
            "include/linux/pagemap.h"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "83800f8ef358ea2fc9b1ae4986b83f2bc24be927",
              "status": "affected",
              "version": "0c58a97f919c24fe4245015f4375a39ff05665b6",
              "versionType": "git"
            },
            {
              "lessThan": "5c24a13d8a0466ca0446e58309e51f2606520164",
              "status": "affected",
              "version": "0c58a97f919c24fe4245015f4375a39ff05665b6",
              "versionType": "git"
            },
            {
              "lessThan": "76f9377cd2ab7a9220c25d33940d9ca20d368172",
              "status": "affected",
              "version": "0c58a97f919c24fe4245015f4375a39ff05665b6",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "fs/fs-writeback.c",
            "fs/fuse/file.c",
            "fs/fuse/inode.c",
            "include/linux/fs/super_types.h",
            "include/linux/pagemap.h"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.16"
            },
            {
              "lessThan": "6.16",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.21",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.19.*",
              "status": "unaffected",
              "version": "6.19.11",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.0",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.21",
                  "versionStartIncluding": "6.16",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.19.11",
                  "versionStartIncluding": "6.16",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.0",
                  "versionStartIncluding": "6.16",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nwriteback: don\u0027t block sync for filesystems with no data integrity guarantees\n\nAdd a SB_I_NO_DATA_INTEGRITY superblock flag for filesystems that cannot\nguarantee data persistence on sync (eg fuse). For superblocks with this\nflag set, sync kicks off writeback of dirty inodes but does not wait\nfor the flusher threads to complete the writeback.\n\nThis replaces the per-inode AS_NO_DATA_INTEGRITY mapping flag added in\ncommit f9a49aa302a0 (\"fs/writeback: skip AS_NO_DATA_INTEGRITY mappings\nin wait_sb_inodes()\"). The flag belongs at the superblock level because\ndata integrity is a filesystem-wide property, not a per-inode one.\nHaving this flag at the superblock level also allows us to skip having\nto iterate every dirty inode in wait_sb_inodes() only to skip each inode\nindividually.\n\nPrior to this commit, mappings with no data integrity guarantees skipped\nwaiting on writeback completion but still waited on the flusher threads\nto finish initiating the writeback. Waiting on the flusher threads is\nunnecessary. This commit kicks off writeback but does not wait on the\nflusher threads. This change properly addresses a recent report [1] for\na suspend-to-RAM hang seen on fuse-overlayfs that was caused by waiting\non the flusher threads to finish:\n\nWorkqueue: pm_fs_sync pm_fs_sync_work_fn\nCall Trace:\n \u003cTASK\u003e\n __schedule+0x457/0x1720\n schedule+0x27/0xd0\n wb_wait_for_completion+0x97/0xe0\n sync_inodes_sb+0xf8/0x2e0\n __iterate_supers+0xdc/0x160\n ksys_sync+0x43/0xb0\n pm_fs_sync_work_fn+0x17/0xa0\n process_one_work+0x193/0x350\n worker_thread+0x1a1/0x310\n kthread+0xfc/0x240\n ret_from_fork+0x243/0x280\n ret_from_fork_asm+0x1a/0x30\n \u003c/TASK\u003e\n\nOn fuse this is problematic because there are paths that may cause the\nflusher thread to block (eg if systemd freezes the user session cgroups\nfirst, which freezes the fuse daemon, before invoking the kernel\nsuspend. The kernel suspend triggers -\u003ewrite_node() which on fuse issues\na synchronous setattr request, which cannot be processed since the\ndaemon is frozen. Or if the daemon is buggy and cannot properly complete\nwriteback, initiating writeback on a dirty folio already under writeback\nleads to writeback_get_folio() -\u003e folio_prepare_writeback() -\u003e\nunconditional wait on writeback to finish, which will cause a hang).\nThis commit restores fuse to its prior behavior before tmp folios were\nremoved, where sync was essentially a no-op.\n\n[1] https://lore.kernel.org/linux-fsdevel/CAJnrk1a-asuvfrbKXbEwwDSctvemF+6zfhdnuzO65Pt8HsFSRw@mail.gmail.com/T/#m632c4648e9cafc4239299887109ebd880ac6c5c1"
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-05-11T22:09:15.426Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/83800f8ef358ea2fc9b1ae4986b83f2bc24be927"
        },
        {
          "url": "https://git.kernel.org/stable/c/5c24a13d8a0466ca0446e58309e51f2606520164"
        },
        {
          "url": "https://git.kernel.org/stable/c/76f9377cd2ab7a9220c25d33940d9ca20d368172"
        }
      ],
      "title": "writeback: don\u0027t block sync for filesystems with no data integrity guarantees",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-31465",
    "datePublished": "2026-04-22T13:53:55.614Z",
    "dateReserved": "2026-03-09T15:48:24.097Z",
    "dateUpdated": "2026-05-11T22:09:15.426Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-31465",
      "date": "2026-11-21",
      "epss": "0.00125",
      "percentile": "0.02213"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "defaultStatus": "unaffected",
                "product": "Linux",
                "programFiles": [
                  "fs/fs-writeback.c",
                  "fs/fuse/file.c",
                  "fs/fuse/inode.c",
                  "include/linux/fs/super_types.h",
                  "include/linux/pagemap.h"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "lessThan": "83800f8ef358ea2fc9b1ae4986b83f2bc24be927",
                    "status": "affected",
                    "version": "0c58a97f919c24fe4245015f4375a39ff05665b6",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "5c24a13d8a0466ca0446e58309e51f2606520164",
                    "status": "affected",
                    "version": "0c58a97f919c24fe4245015f4375a39ff05665b6",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "76f9377cd2ab7a9220c25d33940d9ca20d368172",
                    "status": "affected",
                    "version": "0c58a97f919c24fe4245015f4375a39ff05665b6",
                    "versionType": "git"
                  }
                ]
              },
              {
                "defaultStatus": "affected",
                "product": "Linux",
                "programFiles": [
                  "fs/fs-writeback.c",
                  "fs/fuse/file.c",
                  "fs/fuse/inode.c",
                  "include/linux/fs/super_types.h",
                  "include/linux/pagemap.h"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "status": "affected",
                    "version": "6.16"
                  },
                  {
                    "lessThan": "6.16",
                    "status": "unaffected",
                    "version": "0",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.18.*",
                    "status": "unaffected",
                    "version": "6.18.21",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.19.*",
                    "status": "unaffected",
                    "version": "6.19.11",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "*",
                    "status": "unaffected",
                    "version": "7.0",
                    "versionType": "original_commit_for_fix"
                  }
                ]
              }
            ],
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
          }
        ],
        "configurations": [
          {
            "nodes": [
              {
                "cpeMatch": [
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "A6CA36DA-3783-4321-81A6-485364836084",
                    "versionEndExcluding": "6.18.21",
                    "versionStartIncluding": "6.16",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "4CA2E747-A9EC-4518-9AA2-B4247FC748B7",
                    "versionEndExcluding": "6.19.11",
                    "versionStartIncluding": "6.19",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc1:*:*:*:*:*:*",
                    "matchCriteriaId": "F253B622-8837-4245-BCE5-A7BF8FC76A16",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc2:*:*:*:*:*:*",
                    "matchCriteriaId": "4AE85AD8-4641-4E7C-A2F4-305E2CD9EE64",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc3:*:*:*:*:*:*",
                    "matchCriteriaId": "F666C8D8-6538-46D4-B318-87610DE64C34",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc4:*:*:*:*:*:*",
                    "matchCriteriaId": "02259FDA-961B-47BC-AE7F-93D7EC6E90C2",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc5:*:*:*:*:*:*",
                    "matchCriteriaId": "58A9FEFF-C040-420D-8F0A-BFDAAA1DF258",
                    "vulnerable": true
                  }
                ],
                "negate": false,
                "operator": "OR"
              }
            ]
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nwriteback: don\u0027t block sync for filesystems with no data integrity guarantees\n\nAdd a SB_I_NO_DATA_INTEGRITY superblock flag for filesystems that cannot\nguarantee data persistence on sync (eg fuse). For superblocks with this\nflag set, sync kicks off writeback of dirty inodes but does not wait\nfor the flusher threads to complete the writeback.\n\nThis replaces the per-inode AS_NO_DATA_INTEGRITY mapping flag added in\ncommit f9a49aa302a0 (\"fs/writeback: skip AS_NO_DATA_INTEGRITY mappings\nin wait_sb_inodes()\"). The flag belongs at the superblock level because\ndata integrity is a filesystem-wide property, not a per-inode one.\nHaving this flag at the superblock level also allows us to skip having\nto iterate every dirty inode in wait_sb_inodes() only to skip each inode\nindividually.\n\nPrior to this commit, mappings with no data integrity guarantees skipped\nwaiting on writeback completion but still waited on the flusher threads\nto finish initiating the writeback. Waiting on the flusher threads is\nunnecessary. This commit kicks off writeback but does not wait on the\nflusher threads. This change properly addresses a recent report [1] for\na suspend-to-RAM hang seen on fuse-overlayfs that was caused by waiting\non the flusher threads to finish:\n\nWorkqueue: pm_fs_sync pm_fs_sync_work_fn\nCall Trace:\n \u003cTASK\u003e\n __schedule+0x457/0x1720\n schedule+0x27/0xd0\n wb_wait_for_completion+0x97/0xe0\n sync_inodes_sb+0xf8/0x2e0\n __iterate_supers+0xdc/0x160\n ksys_sync+0x43/0xb0\n pm_fs_sync_work_fn+0x17/0xa0\n process_one_work+0x193/0x350\n worker_thread+0x1a1/0x310\n kthread+0xfc/0x240\n ret_from_fork+0x243/0x280\n ret_from_fork_asm+0x1a/0x30\n \u003c/TASK\u003e\n\nOn fuse this is problematic because there are paths that may cause the\nflusher thread to block (eg if systemd freezes the user session cgroups\nfirst, which freezes the fuse daemon, before invoking the kernel\nsuspend. The kernel suspend triggers -\u003ewrite_node() which on fuse issues\na synchronous setattr request, which cannot be processed since the\ndaemon is frozen. Or if the daemon is buggy and cannot properly complete\nwriteback, initiating writeback on a dirty folio already under writeback\nleads to writeback_get_folio() -\u003e folio_prepare_writeback() -\u003e\nunconditional wait on writeback to finish, which will cause a hang).\nThis commit restores fuse to its prior behavior before tmp folios were\nremoved, where sync was essentially a no-op.\n\n[1] https://lore.kernel.org/linux-fsdevel/CAJnrk1a-asuvfrbKXbEwwDSctvemF+6zfhdnuzO65Pt8HsFSRw@mail.gmail.com/T/#m632c4648e9cafc4239299887109ebd880ac6c5c1"
          },
          {
            "lang": "es",
            "value": "En el kernel de Linux, la siguiente vulnerabilidad ha sido resuelta:\n\nwriteback: no bloquear la sincronizaci\u00f3n para sistemas de archivos sin garant\u00edas de integridad de datos\n\nA\u00f1adir una bandera de superbloque SB_I_NO_DATA_INTEGRITY para sistemas de archivos que no pueden garantizar la persistencia de datos en la sincronizaci\u00f3n (por ejemplo, fuse). Para superbloques con esta bandera establecida, la sincronizaci\u00f3n inicia el writeback de inodos sucios pero no espera a que los hilos de vaciado completen el writeback.\n\nEsto reemplaza la bandera de mapeo AS_NO_DATA_INTEGRITY por inodo a\u00f1adida en el commit f9a49aa302a0 (\u2019fs/writeback: omitir mapeos AS_NO_DATA_INTEGRITY en wait_sb_inodes()\u2019). La bandera pertenece al nivel del superbloque porque la integridad de los datos es una propiedad de todo el sistema de archivos, no una por inodo. Tener esta bandera a nivel de superbloque tambi\u00e9n nos permite evitar tener que iterar cada inodo sucio en wait_sb_inodes() solo para omitir cada inodo individualmente.\n\nAntes de este commit, los mapeos sin garant\u00edas de integridad de datos omit\u00edan esperar la finalizaci\u00f3n del writeback pero a\u00fan esperaban a que los hilos de vaciado terminaran de iniciar el writeback. Esperar a los hilos de vaciado es innecesario. Este commit inicia el writeback pero no espera a los hilos de vaciado. Este cambio aborda correctamente un informe reciente [1] por un cuelgue de suspensi\u00f3n a RAM visto en fuse-overlayfs que fue causado por esperar a que los hilos de vaciado terminaran:\n\nWorkqueue: pm_fs_sync pm_fs_sync_work_fn\nRastro de Llamada:\n [TAREA]\n __schedule+0x457/0x 1720\n schedule+0x27/0xd0\n wb_wait_for_completion+0x97/0xe0\n sync_inodes_sb+0xf8/0x2e0\n __iterate_supers+0xdc/0x160\n ksys_sync+0x43/0xb0\n pm_fs_sync_work_fn+0x17/0xa0\n process_one_work+0x193/0x350\n worker_thread+0x1a1/0x310\n kthread+0xfc/0x240\n ret_from_fork+0x243/0x280\n ret_from_fork_asm+0x1a/0x30\n [/TAREA]\n\nEn fuse esto es problem\u00e1tico porque hay rutas que pueden causar que el hilo de vaciado se bloquee (por ejemplo, si systemd congela primero los cgroups de la sesi\u00f3n de usuario, lo que congela el demonio fuse, antes de invocar la suspensi\u00f3n del kernel. La suspensi\u00f3n del kernel activa   -\u003e  write_node() que en fuse emite una solicitud setattr s\u00edncrona, que no puede procesarse ya que el demonio est\u00e1 congelado. O si el demonio tiene errores y no puede completar correctamente el writeback, iniciar el writeback en un folio sucio que ya est\u00e1 en writeback lleva a writeback_get_folio()   -\u003e   folio_prepare_writeback()   -\u003e   espera incondicional a que el writeback termine, lo que causar\u00e1 un cuelgue). Este commit restaura fuse a su comportamiento anterior antes de que se eliminaran los folios temporales, donde la sincronizaci\u00f3n era esencialmente una operaci\u00f3n nula.\n\n[1] https://lore.kernel.org/linux-fsdevel/CAJnrk1a-asuvfrbKXbEwwDSctvemF+6zfhdnuzO65Pt8HsFSRw@mail.gmail.com/T/#m632c4648e9cafc4239299887109ebd880ac6c5c1"
          }
        ],
        "id": "CVE-2026-31465",
        "lastModified": "2026-11-11T23:10:00.263",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "LOW",
                "attackVector": "LOCAL",
                "availabilityImpact": "HIGH",
                "baseScore": 5.5,
                "baseSeverity": "MEDIUM",
                "confidentialityImpact": "NONE",
                "integrityImpact": "NONE",
                "privilegesRequired": "LOW",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
                "version": "3.1"
              },
              "exploitabilityScore": 1.8,
              "impactScore": 3.6,
              "source": "nvd@nist.gov",
              "type": "Primary"
            }
          ]
        },
        "published": "2026-04-22T14:16:42.633",
        "references": [
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/5c24a13d8a0466ca0446e58309e51f2606520164"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/76f9377cd2ab7a9220c25d33940d9ca20d368172"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/83800f8ef358ea2fc9b1ae4986b83f2bc24be927"
          }
        ],
        "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "vulnStatus": "Analyzed",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "NVD-CWE-noinfo"
              }
            ],
            "source": "nvd@nist.gov",
            "type": "Primary"
          }
        ]
      }
    },
    "redhat_vex": {
      "aggregate_severity": "Low",
      "current_release_date": "2026-11-07T04:17:37+00:00",
      "cve": "CVE-2026-31465",
      "id": "CVE-2026-31465",
      "initial_release_date": "2026-04-22T00:00:00+00:00",
      "product_status:known_affected": "14",
      "product_status:known_not_affected": "186",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: writeback: don\u0027t block sync for filesystems with no data integrity guarantees",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-31465.json",
      "version": "3"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.