CVE-2026-128907 (GCVE-0-2026-128907)

Vulnerability from cvelistv5 – Published: 2026-11-13 14:26 – Updated: 2026-11-13 14:26 Unsupported When Assigned
VLAI
Title
DJI AeroScope Mobile: Missing authentication on the management interface
Summary
Missing authentication for a critical function (CWE-306) in the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to read device information, such as the serial number, MAC address, IP address and radio configuration, and to change configuration settings. The service accepts commands in DJI's proprietary DUML protocol without any authentication. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. The same commands are also accepted over the USB operator port. Confirmed on a physical device. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available.
CWE
  • CWE-306 - Missing Authentication for Critical Function
Assigner
NCSC.ch CNA under the mitre root
CNA scorecard B 79/100 over 85 records in the last 180 days details
References
Impacted products
Vendor Product Version CPE status
DJI AeroScope Mobile (TP703) Affected: 03.00.00.26 (custom)
guessed Create a notification for this product.
DJI AeroScope Mobile (TP703) 1300 communications board firmware Affected: 02.00.07.12 , ≤ 02.00.08.40 (custom)
guessed Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "cna": {
      "affected": [
        {
          "collectionURL": "https://www.dji.com",
          "defaultStatus": "unknown",
          "modules": [
            "1300 DM810X communications board (uavmonitor_usbv1)"
          ],
          "platforms": [
            "ARM"
          ],
          "product": "AeroScope Mobile (TP703)",
          "programFiles": [
            "opt/dvr_rdk/ti810x/bin/uavmonitor_usbv1"
          ],
          "vendor": "DJI",
          "versions": [
            {
              "status": "affected",
              "version": "03.00.00.26",
              "versionType": "custom"
            }
          ]
        },
        {
          "collectionURL": "https://www.dji.com",
          "defaultStatus": "unknown",
          "platforms": [
            "ARM"
          ],
          "product": "AeroScope Mobile (TP703) 1300 communications board firmware",
          "programFiles": [
            "opt/dvr_rdk/ti810x/bin/uavmonitor_usbv1"
          ],
          "vendor": "DJI",
          "versions": [
            {
              "lessThanOrEqual": "02.00.08.40",
              "status": "affected",
              "version": "02.00.07.12",
              "versionType": "custom"
            }
          ]
        }
      ],
      "credits": [
        {
          "lang": "en",
          "type": "finder",
          "value": "Lloren\u00e7 Rom\u00e1 Alvarez, Security Researcher, Cyber Defence Campus, Switzerland"
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003cp\u003eMissing authentication for a critical function (CWE-306) in the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to read device information, such as the serial number, MAC address, IP address and radio configuration, and to change configuration settings. The service accepts commands in DJI\u0027s proprietary DUML protocol without any authentication. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. The same commands are also accepted over the USB operator port. Confirmed on a physical device.\u003c/p\u003e\u003cp\u003eNOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available.\u003c/p\u003e"
            }
          ],
          "value": "Missing authentication for a critical function (CWE-306) in the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to read device information, such as the serial number, MAC address, IP address and radio configuration, and to change configuration settings. The service accepts commands in DJI\u0027s proprietary DUML protocol without any authentication. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. The same commands are also accepted over the USB operator port. Confirmed on a physical device.\n\n\n\nNOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "LOW",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "format": "CVSS",
          "scenarios": [
            {
              "lang": "en",
              "value": "Score agreed with the vendor for the standalone impact of the interface. Adjacent (AV:A) reach via the multicast discovery on 225.0.0.37:16001. C:N because the readable data is device identifiers and non-confidential configuration; I:L because configuration changes alone have limited impact; A:N. Command injection and firmware replacement through the same interface are scored in their own records. If the management interface is IP-routed, use AV:N -\u003e CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N = 5.3 MEDIUM."
            }
          ]
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-306",
              "description": "CWE-306 Missing Authentication for Critical Function",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-11-13T14:26:41.668Z",
        "orgId": "455daabc-a392-441d-aa46-37d35189897c",
        "shortName": "NCSC.ch"
      },
      "references": [
        {
          "name": "Cyber Defence Campus vulnerability advisories",
          "tags": [
            "third-party-advisory"
          ],
          "url": "https://cyber-defence-campus.github.io/projects/vulnerabilities/CVE-2026-128907/"
        },
        {
          "name": "DJI AeroScope product page",
          "tags": [
            "product"
          ],
          "url": "https://www.dji.com/aeroscope"
        },
        {
          "name": "DJI AeroScope Mobile research repository (technical details)",
          "tags": [
            "technical-description"
          ],
          "url": "https://github.com/llorencroma/dji-aeroscope-root"
        }
      ],
      "solutions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003cp\u003eDJI AeroScope Mobile has been discontinued and is no longer supported by DJI. No fixed firmware is available. Operators should plan to replace affected units with a supported product and, until then, apply the workarounds.\u003c/p\u003e"
            }
          ],
          "value": "DJI AeroScope Mobile has been discontinued and is no longer supported by DJI. No fixed firmware is available. Operators should plan to replace affected units with a supported product and, until then, apply the workarounds."
        }
      ],
      "source": {
        "discovery": "EXTERNAL"
      },
      "tags": [
        "unsupported-when-assigned"
      ],
      "timeline": [
        {
          "lang": "en",
          "time": "2026-09-25T00:00:00.000Z",
          "value": "Confirmed on a physical device"
        },
        {
          "lang": "en",
          "time": "2026-09-25T00:00:00.000Z",
          "value": "Reported to DJI"
        },
        {
          "lang": "en",
          "time": "2026-11-04T00:00:00.000Z",
          "value": "DJI acknowledged the vulnerability and provided its assessment"
        }
      ],
      "title": "DJI AeroScope Mobile: Missing authentication on the management interface",
      "workarounds": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003cp\u003eConnect the unit\u0027s management Ethernet port only to an isolated network segment with no untrusted hosts, and do not route or bridge that segment to other networks, so that TCP port 16000 and the multicast discovery traffic (225.0.0.37, UDP port 16001) cannot be reached. Restrict physical access to the USB operator port.\u003c/p\u003e"
            }
          ],
          "value": "Connect the unit\u0027s management Ethernet port only to an isolated network segment with no untrusted hosts, and do not route or bridge that segment to other networks, so that TCP port 16000 and the multicast discovery traffic (225.0.0.37, UDP port 16001) cannot be reached. Restrict physical access to the USB operator port."
        }
      ],
      "x_generator": {
        "engine": "Vulnogram 1.0.5"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "455daabc-a392-441d-aa46-37d35189897c",
    "assignerShortName": "NCSC.ch",
    "cveId": "CVE-2026-128907",
    "datePublished": "2026-11-13T14:26:41.668Z",
    "dateReserved": "2026-11-13T12:42:51.721Z",
    "dateUpdated": "2026-11-13T14:26:41.668Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-128907",
      "date": "2026-11-16",
      "epss": "0.00215",
      "percentile": "0.11943"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "collectionURL": "https://www.dji.com",
                "defaultStatus": "unknown",
                "modules": [
                  "1300 DM810X communications board (uavmonitor_usbv1)"
                ],
                "platforms": [
                  "ARM"
                ],
                "product": "AeroScope Mobile (TP703)",
                "programFiles": [
                  "opt/dvr_rdk/ti810x/bin/uavmonitor_usbv1"
                ],
                "vendor": "DJI",
                "versions": [
                  {
                    "status": "affected",
                    "version": "03.00.00.26",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "collectionURL": "https://www.dji.com",
                "defaultStatus": "unknown",
                "platforms": [
                  "ARM"
                ],
                "product": "AeroScope Mobile (TP703) 1300 communications board firmware",
                "programFiles": [
                  "opt/dvr_rdk/ti810x/bin/uavmonitor_usbv1"
                ],
                "vendor": "DJI",
                "versions": [
                  {
                    "lessThanOrEqual": "02.00.08.40",
                    "status": "affected",
                    "version": "02.00.07.12",
                    "versionType": "custom"
                  }
                ]
              }
            ],
            "source": "vulnerability@ncsc.ch"
          }
        ],
        "cveTags": [
          {
            "sourceIdentifier": "vulnerability@ncsc.ch",
            "tags": [
              "unsupported-when-assigned"
            ]
          }
        ],
        "descriptions": [
          {
            "lang": "en",
            "value": "Missing authentication for a critical function (CWE-306) in the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to read device information, such as the serial number, MAC address, IP address and radio configuration, and to change configuration settings. The service accepts commands in DJI\u0027s proprietary DUML protocol without any authentication. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. The same commands are also accepted over the USB operator port. Confirmed on a physical device.\n\n\n\nNOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available."
          }
        ],
        "id": "CVE-2026-128907",
        "lastModified": "2026-11-13T15:17:44.447",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "LOW",
                "attackVector": "ADJACENT_NETWORK",
                "availabilityImpact": "NONE",
                "baseScore": 4.3,
                "baseSeverity": "MEDIUM",
                "confidentialityImpact": "NONE",
                "integrityImpact": "LOW",
                "privilegesRequired": "NONE",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
                "version": "3.1"
              },
              "exploitabilityScore": 2.8,
              "impactScore": 1.4,
              "source": "vulnerability@ncsc.ch",
              "type": "Secondary"
            }
          ]
        },
        "published": "2026-11-13T15:17:44.447",
        "references": [
          {
            "source": "vulnerability@ncsc.ch",
            "url": "https://cyber-defence-campus.github.io/projects/vulnerabilities/CVE-2026-128907/"
          },
          {
            "source": "vulnerability@ncsc.ch",
            "url": "https://github.com/llorencroma/dji-aeroscope-root"
          },
          {
            "source": "vulnerability@ncsc.ch",
            "url": "https://www.dji.com/aeroscope"
          }
        ],
        "sourceIdentifier": "vulnerability@ncsc.ch",
        "vulnStatus": "Received",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "CWE-306"
              }
            ],
            "source": "vulnerability@ncsc.ch",
            "type": "Secondary"
          }
        ]
      }
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.