CVE-2024-43893 (GCVE-0-2024-43893)
Vulnerability from cvelistv5 – Published: 2024-08-26 10:10 – Updated: 2026-10-15 00:49
VLAI
EPSS
VEX
Title
serial: core: check uartclk for zero to avoid divide by zero
Summary
In the Linux kernel, the following vulnerability has been resolved:
serial: core: check uartclk for zero to avoid divide by zero
Calling ioctl TIOCSSERIAL with an invalid baud_base can
result in uartclk being zero, which will result in a
divide by zero error in uart_get_divisor(). The check for
uartclk being zero in uart_set_info() needs to be done
before other settings are made as subsequent calls to
ioctl TIOCSSERIAL for the same port would be impacted if
the uartclk check was done where uartclk gets set.
Oops: divide error: 0000 PREEMPT SMP KASAN PTI
RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580)
Call Trace:
<TASK>
serial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576
drivers/tty/serial/8250/8250_port.c:2589)
serial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502
drivers/tty/serial/8250/8250_port.c:2741)
serial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862)
uart_change_line_settings (./include/linux/spinlock.h:376
./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222)
uart_port_startup (drivers/tty/serial/serial_core.c:342)
uart_startup (drivers/tty/serial/serial_core.c:368)
uart_set_info (drivers/tty/serial/serial_core.c:1034)
uart_set_info_user (drivers/tty/serial/serial_core.c:1059)
tty_set_serial (drivers/tty/tty_io.c:2637)
tty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791)
__x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907
fs/ioctl.c:893 fs/ioctl.c:893)
do_syscall_64 (arch/x86/entry/common.c:52
(discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Rule: add
Severity
No CVSS data available.
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2024-09-10 15:29 UTC
Assigner
References
13 references
Impacted products
6 products
| Vendor | Product | Version | CPE status | |
|---|---|---|---|---|
| Linux | Linux |
Affected:
1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 , < 3bbd90fca824e6fd61fb20f6dd2b0fa5f8b14bba
(git)
Affected: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 , < 55b2a5d331a6ceb1c4372945fdb77181265ba24f (git) Affected: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 , < 52b138f1021113e593ee6ad258ce08fe90693a9e (git) Affected: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 , < 9196e42a3b8eeff1707e6ef769112b4b6096be49 (git) Affected: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 , < e13ba3fe5ee070f8a9dab60029d52b1f61da5051 (git) Affected: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 , < e3ad503876283ac3fcca922a1bf243ef9eb0b0e2 (git) Affected: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 , < 68dc02f319b9ee54dc23caba742a5c754d1cccc8 (git) Affected: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 , < 6eabce6608d6f3440f4c03aa3d3ef50a47a3d193 (git) |
guessed | |
| Linux | Linux |
Affected:
2.6.12
Unaffected: 0 , < 2.6.12 (semver) Unaffected: 4.19.320 , ≤ 4.19.* (semver) Unaffected: 5.4.282 , ≤ 5.4.* (semver) Unaffected: 5.10.224 , ≤ 5.10.* (semver) Unaffected: 5.15.165 , ≤ 5.15.* (semver) Unaffected: 6.1.105 , ≤ 6.1.* (semver) Unaffected: 6.6.46 , ≤ 6.6.* (semver) Unaffected: 6.10.5 , ≤ 6.10.* (semver) Unaffected: 6.11 , ≤ * (original_commit_for_fix) |
guessed | |
| Siemens | RUGGEDCOM RST2428P |
Affected:
0 , < V3.1
(custom)
|
guessed | |
| Siemens | SCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 family |
Unaffected:
0 , < *
(custom)
|
guessed | |
| Siemens | SCALANCE XCM-/XRM-/XCH-/XRH-300 family |
Affected:
0 , < V3.1
(custom)
|
guessed | |
| Siemens | SIMATIC S7-1500 TM MFP - GNU/Linux subsystem |
Affected:
0 , < V1.1.1
(custom)
|
guessed |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2024-43893",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-09-10T15:29:15.877067Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2024-09-12T17:32:57.839Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
},
{
"providerMetadata": {
"dateUpdated": "2025-11-03T22:06:54.168Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "https://lists.debian.org/debian-lts-announce/2025/01/msg00001.html"
},
{
"url": "https://lists.debian.org/debian-lts-announce/2024/10/msg00003.html"
}
],
"title": "CVE Program Container"
},
{
"affected": [
{
"defaultStatus": "unknown",
"product": "RUGGEDCOM RST2428P",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 family",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE XCM-/XRM-/XCH-/XRH-300 family",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V1.1.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-15T00:49:09.415Z",
"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"shortName": "siemens-SADP"
},
"references": [
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-265688.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-613116.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-355557.html"
}
],
"x_adpType": "supplier"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/tty/serial/serial_core.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "3bbd90fca824e6fd61fb20f6dd2b0fa5f8b14bba",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "55b2a5d331a6ceb1c4372945fdb77181265ba24f",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "52b138f1021113e593ee6ad258ce08fe90693a9e",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "9196e42a3b8eeff1707e6ef769112b4b6096be49",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "e13ba3fe5ee070f8a9dab60029d52b1f61da5051",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "e3ad503876283ac3fcca922a1bf243ef9eb0b0e2",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "68dc02f319b9ee54dc23caba742a5c754d1cccc8",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "6eabce6608d6f3440f4c03aa3d3ef50a47a3d193",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/tty/serial/serial_core.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "2.6.12"
},
{
"lessThan": "2.6.12",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "4.19.*",
"status": "unaffected",
"version": "4.19.320",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.4.*",
"status": "unaffected",
"version": "5.4.282",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.224",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.165",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.105",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.46",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.10.*",
"status": "unaffected",
"version": "6.10.5",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "6.11",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "4.19.320",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.4.282",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.224",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.165",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.105",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.46",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.10.5",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.11",
"versionStartIncluding": "2.6.12",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nserial: core: check uartclk for zero to avoid divide by zero\n\nCalling ioctl TIOCSSERIAL with an invalid baud_base can\nresult in uartclk being zero, which will result in a\ndivide by zero error in uart_get_divisor(). The check for\nuartclk being zero in uart_set_info() needs to be done\nbefore other settings are made as subsequent calls to\nioctl TIOCSSERIAL for the same port would be impacted if\nthe uartclk check was done where uartclk gets set.\n\nOops: divide error: 0000 PREEMPT SMP KASAN PTI\nRIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580)\nCall Trace:\n \u003cTASK\u003e\nserial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576\n drivers/tty/serial/8250/8250_port.c:2589)\nserial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502\n drivers/tty/serial/8250/8250_port.c:2741)\nserial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862)\nuart_change_line_settings (./include/linux/spinlock.h:376\n ./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222)\nuart_port_startup (drivers/tty/serial/serial_core.c:342)\nuart_startup (drivers/tty/serial/serial_core.c:368)\nuart_set_info (drivers/tty/serial/serial_core.c:1034)\nuart_set_info_user (drivers/tty/serial/serial_core.c:1059)\ntty_set_serial (drivers/tty/tty_io.c:2637)\ntty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791)\n__x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907\n fs/ioctl.c:893 fs/ioctl.c:893)\ndo_syscall_64 (arch/x86/entry/common.c:52\n (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))\nentry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)\n\nRule: add"
}
],
"providerMetadata": {
"dateUpdated": "2026-05-11T20:31:51.254Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/3bbd90fca824e6fd61fb20f6dd2b0fa5f8b14bba"
},
{
"url": "https://git.kernel.org/stable/c/55b2a5d331a6ceb1c4372945fdb77181265ba24f"
},
{
"url": "https://git.kernel.org/stable/c/52b138f1021113e593ee6ad258ce08fe90693a9e"
},
{
"url": "https://git.kernel.org/stable/c/9196e42a3b8eeff1707e6ef769112b4b6096be49"
},
{
"url": "https://git.kernel.org/stable/c/e13ba3fe5ee070f8a9dab60029d52b1f61da5051"
},
{
"url": "https://git.kernel.org/stable/c/e3ad503876283ac3fcca922a1bf243ef9eb0b0e2"
},
{
"url": "https://git.kernel.org/stable/c/68dc02f319b9ee54dc23caba742a5c754d1cccc8"
},
{
"url": "https://git.kernel.org/stable/c/6eabce6608d6f3440f4c03aa3d3ef50a47a3d193"
}
],
"title": "serial: core: check uartclk for zero to avoid divide by zero",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2024-43893",
"datePublished": "2024-08-26T10:10:48.046Z",
"dateReserved": "2024-08-17T09:11:59.290Z",
"dateUpdated": "2026-10-15T00:49:09.415Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2024-43893",
"date": "2026-11-07",
"epss": "0.00257",
"percentile": "0.1744"
},
"microsoft_vex": {
"current_release_date": "2026-02-18T02:15:15.000Z",
"cve": "CVE-2024-43893",
"id": "msrc_CVE-2024-43893",
"initial_release_date": "2024-08-02T00:00:00.000Z",
"product_status:fixed": "3",
"product_status:known_affected": "3",
"source": "Microsoft CSAF VEX",
"status": "final",
"title": "serial: core: check uartclk for zero to avoid divide by zero",
"url": "https://msrc.microsoft.com/csaf/vex/2024/msrc_cve-2024-43893.json",
"version": "2"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/tty/serial/serial_core.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "3bbd90fca824e6fd61fb20f6dd2b0fa5f8b14bba",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "55b2a5d331a6ceb1c4372945fdb77181265ba24f",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "52b138f1021113e593ee6ad258ce08fe90693a9e",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "9196e42a3b8eeff1707e6ef769112b4b6096be49",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "e13ba3fe5ee070f8a9dab60029d52b1f61da5051",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "e3ad503876283ac3fcca922a1bf243ef9eb0b0e2",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "68dc02f319b9ee54dc23caba742a5c754d1cccc8",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "6eabce6608d6f3440f4c03aa3d3ef50a47a3d193",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/tty/serial/serial_core.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "2.6.12"
},
{
"lessThan": "2.6.12",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "4.19.*",
"status": "unaffected",
"version": "4.19.320",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.4.*",
"status": "unaffected",
"version": "5.4.282",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.224",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.165",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.105",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.46",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.10.*",
"status": "unaffected",
"version": "6.10.5",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "6.11",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"affectedData": [
{
"defaultStatus": "unknown",
"product": "RUGGEDCOM RST2428P",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 family",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE XCM-/XRM-/XCH-/XRH-300 family",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V1.1.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
}
],
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e"
}
],
"configurations": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "0B4EF915-550B-45E5-B2CA-648FEACD60FC",
"versionEndExcluding": "4.19.320",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "A8961D98-9ACF-4188-BA88-44038B14BC28",
"versionEndExcluding": "5.4.282",
"versionStartIncluding": "4.20",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "5CCEDF13-293D-4E64-B501-4409D0365AFE",
"versionEndExcluding": "5.10.224",
"versionStartIncluding": "5.5",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "B4E2B568-3171-41DE-B519-F2B1A3600D94",
"versionEndExcluding": "5.15.165",
"versionStartIncluding": "5.11",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "89BEB24B-0F37-4C92-A397-564DA7CD8EE9",
"versionEndExcluding": "6.1.105",
"versionStartIncluding": "5.16",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "FA11941E-81FB-484C-B583-881EEB488340",
"versionEndExcluding": "6.6.46",
"versionStartIncluding": "6.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "D074AE50-4A5E-499C-A2FD-75FD60DEA560",
"versionEndExcluding": "6.10.5",
"versionStartIncluding": "6.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:6.11:rc1:*:*:*:*:*:*",
"matchCriteriaId": "8B3CE743-2126-47A3-8B7C-822B502CF119",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:6.11:rc2:*:*:*:*:*:*",
"matchCriteriaId": "4DEB27E7-30AA-45CC-8934-B89263EF3551",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nserial: core: check uartclk for zero to avoid divide by zero\n\nCalling ioctl TIOCSSERIAL with an invalid baud_base can\nresult in uartclk being zero, which will result in a\ndivide by zero error in uart_get_divisor(). The check for\nuartclk being zero in uart_set_info() needs to be done\nbefore other settings are made as subsequent calls to\nioctl TIOCSSERIAL for the same port would be impacted if\nthe uartclk check was done where uartclk gets set.\n\nOops: divide error: 0000 PREEMPT SMP KASAN PTI\nRIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580)\nCall Trace:\n \u003cTASK\u003e\nserial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576\n drivers/tty/serial/8250/8250_port.c:2589)\nserial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502\n drivers/tty/serial/8250/8250_port.c:2741)\nserial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862)\nuart_change_line_settings (./include/linux/spinlock.h:376\n ./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222)\nuart_port_startup (drivers/tty/serial/serial_core.c:342)\nuart_startup (drivers/tty/serial/serial_core.c:368)\nuart_set_info (drivers/tty/serial/serial_core.c:1034)\nuart_set_info_user (drivers/tty/serial/serial_core.c:1059)\ntty_set_serial (drivers/tty/tty_io.c:2637)\ntty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791)\n__x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907\n fs/ioctl.c:893 fs/ioctl.c:893)\ndo_syscall_64 (arch/x86/entry/common.c:52\n (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))\nentry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)\n\nRule: add"
},
{
"lang": "es",
"value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: serial: core: verifique uartclk en busca de cero para evitar la divisi\u00f3n por cero. Llamar a ioctl TIOCSSERIAL con un baud_base no v\u00e1lido puede resultar en que uartclk sea cero, lo que resultar\u00e1 en un error de divisi\u00f3n por cero en uart_get_divisor (). La verificaci\u00f3n de que uartclk sea cero en uart_set_info() debe realizarse antes de realizar otras configuraciones, ya que las llamadas posteriores a ioctl TIOCSSERIAL para el mismo puerto se ver\u00edan afectadas si la verificaci\u00f3n de uartclk se realiz\u00f3 donde se establece uartclk. Vaya: error de divisi\u00f3n: 0000 PREEMPT SMP KASAN PTI RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580) Seguimiento de llamadas: serial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576 drivers /tty/serial/8250/8250_port.c:2589) serial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502 drivers/tty/serial/8250/8250_port.c:2741) serial8250_set_termios (drivers/tty/serial/ 8250/8250_port.c:2862) uart_change_line_settings (./include/linux/spinlock.h:376 ./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222) uart_port_startup (drivers/tty/ serial/serial_core.c:342) uart_startup (drivers/tty/serial/serial_core.c:368) uart_set_info (drivers/tty/serial/serial_core.c:1034) uart_set_info_user (drivers/tty/serial/serial_core.c:1059) tty_set_serial (drivers/tty/tty_io.c:2637) tty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791) __x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907 fs /ioctl.c:893 fs/ioctl.c:893) do_syscall_64 (arch/x86/entry/common.c:52 (discriminador 1) arch/x86/entry/common.c:83 (discriminador 1)) Entry_SYSCALL_64_after_hwframe (arch /x86/entry/entry_64.S:130) Regla: agregar"
}
],
"id": "CVE-2024-43893",
"lastModified": "2026-10-15T01:18:49.490",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 5.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
},
"exploitabilityScore": 1.8,
"impactScore": 3.6,
"source": "nvd@nist.gov",
"type": "Primary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2024-43893",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-09-10T15:29:15.877067Z",
"version": "2.0.3"
}
}
]
},
"published": "2024-08-26T11:15:04.213",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/3bbd90fca824e6fd61fb20f6dd2b0fa5f8b14bba"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/52b138f1021113e593ee6ad258ce08fe90693a9e"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/55b2a5d331a6ceb1c4372945fdb77181265ba24f"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/68dc02f319b9ee54dc23caba742a5c754d1cccc8"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/6eabce6608d6f3440f4c03aa3d3ef50a47a3d193"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/9196e42a3b8eeff1707e6ef769112b4b6096be49"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/e13ba3fe5ee070f8a9dab60029d52b1f61da5051"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/e3ad503876283ac3fcca922a1bf243ef9eb0b0e2"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"url": "https://lists.debian.org/debian-lts-announce/2024/10/msg00003.html"
},
{
"source": "af854a3a-2127-422b-91ae-364da2661108",
"url": "https://lists.debian.org/debian-lts-announce/2025/01/msg00001.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"url": "https://cert-portal.siemens.com/productcert/html/ssa-265688.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"url": "https://cert-portal.siemens.com/productcert/html/ssa-355557.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"url": "https://cert-portal.siemens.com/productcert/html/ssa-613116.html"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Modified",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-369"
}
],
"source": "nvd@nist.gov",
"type": "Primary"
}
]
}
},
"redhat_vex": {
"aggregate_severity": "Low",
"current_release_date": "2026-11-07T10:40:35+00:00",
"cve": "CVE-2024-43893",
"id": "CVE-2024-43893",
"initial_release_date": "2024-08-26T00:00:00+00:00",
"product_status:known_affected": "185",
"product_status:known_not_affected": "14",
"source": "Red Hat CSAF VEX",
"status": "final",
"title": "kernel: serial: core: check uartclk for zero to avoid divide by zero",
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2024/cve-2024-43893.json",
"version": "3"
},
"vulnrichment": {
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2025-11-03T22:06:54.168Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "https://lists.debian.org/debian-lts-announce/2025/01/msg00001.html"
},
{
"url": "https://lists.debian.org/debian-lts-announce/2024/10/msg00003.html"
}
],
"title": "CVE Program Container"
},
{
"affected": [
{
"defaultStatus": "unknown",
"product": "RUGGEDCOM RST2428P",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE XC-300/XR-300/XC-400/XR-500WG/XR-500 family",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SCALANCE XCM-/XRM-/XCH-/XRH-300 family",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V3.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
"vendor": "Siemens",
"versions": [
{
"lessThan": "V1.1.1",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-15T00:49:09.415Z",
"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"shortName": "siemens-SADP"
},
"references": [
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-265688.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-613116.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-355557.html"
}
],
"x_adpType": "supplier"
},
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2024-43893",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-09-10T15:29:15.877067Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2024-09-11T12:42:12.483Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/tty/serial/serial_core.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "3bbd90fca824e6fd61fb20f6dd2b0fa5f8b14bba",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "55b2a5d331a6ceb1c4372945fdb77181265ba24f",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "52b138f1021113e593ee6ad258ce08fe90693a9e",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "9196e42a3b8eeff1707e6ef769112b4b6096be49",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "e13ba3fe5ee070f8a9dab60029d52b1f61da5051",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "e3ad503876283ac3fcca922a1bf243ef9eb0b0e2",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "68dc02f319b9ee54dc23caba742a5c754d1cccc8",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "6eabce6608d6f3440f4c03aa3d3ef50a47a3d193",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/tty/serial/serial_core.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "2.6.12"
},
{
"lessThan": "2.6.12",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "4.19.*",
"status": "unaffected",
"version": "4.19.320",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.4.*",
"status": "unaffected",
"version": "5.4.282",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.224",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.165",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.105",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.46",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.10.*",
"status": "unaffected",
"version": "6.10.5",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "6.11",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "4.19.320",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.4.282",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.224",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.165",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.105",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.46",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.10.5",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.11",
"versionStartIncluding": "2.6.12",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nserial: core: check uartclk for zero to avoid divide by zero\n\nCalling ioctl TIOCSSERIAL with an invalid baud_base can\nresult in uartclk being zero, which will result in a\ndivide by zero error in uart_get_divisor(). The check for\nuartclk being zero in uart_set_info() needs to be done\nbefore other settings are made as subsequent calls to\nioctl TIOCSSERIAL for the same port would be impacted if\nthe uartclk check was done where uartclk gets set.\n\nOops: divide error: 0000 PREEMPT SMP KASAN PTI\nRIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580)\nCall Trace:\n \u003cTASK\u003e\nserial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576\n drivers/tty/serial/8250/8250_port.c:2589)\nserial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502\n drivers/tty/serial/8250/8250_port.c:2741)\nserial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862)\nuart_change_line_settings (./include/linux/spinlock.h:376\n ./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222)\nuart_port_startup (drivers/tty/serial/serial_core.c:342)\nuart_startup (drivers/tty/serial/serial_core.c:368)\nuart_set_info (drivers/tty/serial/serial_core.c:1034)\nuart_set_info_user (drivers/tty/serial/serial_core.c:1059)\ntty_set_serial (drivers/tty/tty_io.c:2637)\ntty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791)\n__x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907\n fs/ioctl.c:893 fs/ioctl.c:893)\ndo_syscall_64 (arch/x86/entry/common.c:52\n (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))\nentry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)\n\nRule: add"
}
],
"providerMetadata": {
"dateUpdated": "2026-05-11T20:31:51.254Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/3bbd90fca824e6fd61fb20f6dd2b0fa5f8b14bba"
},
{
"url": "https://git.kernel.org/stable/c/55b2a5d331a6ceb1c4372945fdb77181265ba24f"
},
{
"url": "https://git.kernel.org/stable/c/52b138f1021113e593ee6ad258ce08fe90693a9e"
},
{
"url": "https://git.kernel.org/stable/c/9196e42a3b8eeff1707e6ef769112b4b6096be49"
},
{
"url": "https://git.kernel.org/stable/c/e13ba3fe5ee070f8a9dab60029d52b1f61da5051"
},
{
"url": "https://git.kernel.org/stable/c/e3ad503876283ac3fcca922a1bf243ef9eb0b0e2"
},
{
"url": "https://git.kernel.org/stable/c/68dc02f319b9ee54dc23caba742a5c754d1cccc8"
},
{
"url": "https://git.kernel.org/stable/c/6eabce6608d6f3440f4c03aa3d3ef50a47a3d193"
}
],
"title": "serial: core: check uartclk for zero to avoid divide by zero",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2024-43893",
"datePublished": "2024-08-26T10:10:48.046Z",
"dateReserved": "2024-08-17T09:11:59.290Z",
"dateUpdated": "2026-10-15T00:49:09.415Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
}
}
Loading…
Loading…
Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline
Sightings and recorded dates, grouped by day · UTC
How durations are calculated
Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.
Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.
Loading timeline…
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.