{
  "document": {
    "acknowledgments": [
      {
        "organization": "ABB",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "En",
    "notes": [
      {
        "category": "summary",
        "text": "ABB is aware of public reports of a vulnerabilities in product versions listed as affected in this advisory. An attacker who successfully exploited these vulnerabilities could cause the product to stop, make the product inacces-sible, take remote control of the product or insert and run arbitrary code.\nAs part of ABB product lifecycle policy, once a product transitions to end-of-life, we discontinue maintenance, security patches, and technical support to focus on current and future technologies. While the product will continue to function, we strongly recommend implementing mitigations defined in this document, such as using a private APN cellular network between Arctic wireless gateways and ARM600 for establishing VPN tunnels, to mitigate security risks and avoid potential vulnerabilities.\nAs part of ABB product lifecycle policy, once a product transitions to Limited state, we discontinue maintenance, security patches, and technical support to focus on current and future technologies. While the product will continue to function, we strongly recommend implementing mitigations defined in this document to mitigate security risks.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n3.\tARM600 system is by default not dependent on the name service (DNS). If name service is not used in the system, the name service port (TCP/UDP port 53) can be blocked by a firewall.\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n5.\tFilter specific ICMP packets from external systems (ICMP type 13 and 14) by firewall for not exposing the system time. \n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n\n14.\tIn ARM600SW installations, avoid servers with AMD processors vulnerable to the following: CVE-2021-26401, CVE-2023-20569 and CVE-2023-20593.\n\n\n15.\tAvoid using AX88179_178A chipset-based USB -to-Ethernet devices.\n\n\nRefer to section General security recommendations for additional advice on how to keep your system secure.\n",
        "title": "Mitigating factors"
      },
      {
        "category": "other",
        "text": "For any installation of software-related ABB products we strongly recommend the following (non-exhaustive) list of cyber security practices:\n\u2013\tIsolate special purpose networks (e.g. for automation systems) and remote devices behind firewalls and separate them from any general-purpose network (e.g. office or home networks).\n\u2013\tInstall physical controls so no unauthorized personnel can access your devices, components, peripheral equipment, and networks.\n\u2013\tNever connect programming software or computers containing programing software to any network other than the network for the devices that it is intended for.\n\u2013\tScan all data imported into your environment before use to detect potential malware infections.\n\u2013\tMinimize network exposure for all applications and endpoints to ensure that they are not accessible from the internet unless they are designed for such exposure and the intended use requires such.\n\u2013\tEnsure all nodes are always up to date in terms of installed software, operating system, and firmware patches as well as anti-virus and firewall.\n\u2013\tWhen remote access is required, use secure methods, such as Virtual Private Networks (VPNs). Recognize that VPNs may have vulnerabilities and should be updated to the most current version available. Also, understand that VPNs are only as secure as the connected devices.\nMore information on recommended practices can be found in the following document:\n1MRS758860 Rev. F, Arctic Cyber Security Deployment Guideline\n",
        "title": "General security recommendations"
      },
      {
        "category": "other",
        "text": "For additional instructions and support please contact your local ABB service organization. For contact information, see www.abb.com/contactcenters.\nInformation about ABB\u2019s cyber security program and capabilities can be found at www.abb.com/cybersecurity.\n",
        "title": "Support"
      },
      {
        "category": "legal_disclaimer",
        "text": "The information in this document is subject to change without notice, and should not be construed as a commitment by ABB.\nABB provides no warranty, express or implied, including warranties of merchantability and fitness for a particular purpose, for the information contained in this document, and assumes no responsibility for any errors that may appear in this document. In no event shall ABB or any of its suppliers be liable for direct, indirect, special, incidental or consequential damages of any nature or kind arising from the use of this document, or from the use of any hardware or software described in this document, even if ABB or its suppliers have been advised of the possibility of such damages.\nThis document and parts hereof must not be reproduced or copied without written permission from ABB, and the contents hereof must not be imparted to a third party nor used for any unauthorized purpose.\nAll rights to registrations and trademarks reside with their respective owners.\n",
        "title": "Notice"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from ABB PSIRT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Energy",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Switzerland",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-25-105-08 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2025/icsa-25-105-08.json"
      },
      {
        "summary": "User Manual",
        "url": "https://library.e.abb.com/public/0498e4c0babd46aa9243aedd6f99c375/ARM600_user_758861_ENk.pdf"
      },
      {
        "summary": "ABB product lifecycle policy",
        "url": "https://new.abb.com/service/electrification/life-cycle-management?pe_data=D42415F457244415145784545584371%7C29609824"
      },
      {
        "summary": "ABB CYBERSECURITY ADVISORY - PDF version ",
        "url": "https://search.abb.com/library/Download.aspx?DocumentID=2NGA002579\u0026LanguageCode=en\u0026DocumentPartId=\u0026Action=Launch"
      },
      {
        "summary": "1MRS758860, Rev. F Arctic, Cyber Security Deployment Guideline",
        "url": "https://search.abb.com/library/Download.aspx?DocumentID=1MRS758860\u0026LanguageCode=en\u0026DocumentPartId=\u0026Action=Launch"
      },
      {
        "summary": "Cyber Security Deployment Guideline",
        "url": "https://library.e.abb.com/public/ffab1a14a42646c6adee38fc3de61dad/Arctic_csdepl_758860_ENf.pdf"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-25-105-08 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-25-105-08"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "ABB M2M Gateway",
    "tracking": {
      "current_release_date": "2025-04-07T10:30:00.000000Z",
      "generator": {
        "date": "2025-04-15T16:37:24.772764Z",
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-25-105-08",
      "initial_release_date": "2025-04-07T10:30:00.000000Z",
      "revision_history": [
        {
          "date": "2025-04-07T10:30:00.000000Z",
          "number": "1.0.0",
          "summary": "Initial Version"
        }
      ],
      "status": "final",
      "version": "1.0.0"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "branches": [
                  {
                    "category": "product_version_range",
                    "name": "\u003e=4.1.2|\u003c=5.0.3",
                    "product": {
                      "name": "ABB M2M Gateway ARM600, firmware versions = 4.1.2 \u003c= 5.0.3",
                      "product_id": "CSAFPID-0001"
                    }
                  }
                ],
                "category": "product_name",
                "name": "ARM600"
              },
              {
                "branches": [
                  {
                    "category": "product_version_range",
                    "name": "\u003e=5.0.1|\u003c=5.0.3",
                    "product": {
                      "name": "ABB M2M Gateway SW, software versions = 5.0.1 \u003c= 5.0.3",
                      "product_id": "CSAFPID-0002"
                    }
                  }
                ],
                "category": "product_name",
                "name": "SW"
              }
            ],
            "category": "product_family",
            "name": "ABB M2M Gateway"
          }
        ],
        "category": "vendor",
        "name": "ABB"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-23521",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "description",
          "text": "Vulnerability in Git that arises from an issue with git attributes parsing. This flaw can lead to an integer overflow, which might be exploited by authenticated attackers to execute arbitrary code or cause a denial of service.",
          "title": "CVE description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2022-23521",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-23521"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 8.1,
            "environmentalSeverity": "HIGH",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 8.1,
            "temporalSeverity": "HIGH",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-23521"
    },
    {
      "cve": "CVE-2022-41903",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "description",
          "text": "Vulnerability in Git that involves a heap overflow in the git archive and git log --format commands. This flaw can potentially lead to remote code execution (RCE) if exploited by authenticated attacker.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2022-41903",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-41903"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 8.1,
            "environmentalSeverity": "HIGH",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 8.1,
            "temporalSeverity": "HIGH",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-41903"
    },
    {
      "cve": "CVE-2023-25690",
      "cwe": {
        "id": "CWE-444",
        "name": "Inconsistent Interpretation of HTTP Requests (\u0027HTTP Request/Response Smuggling\u0027)"
      },
      "notes": [
        {
          "category": "description",
          "text": "Vulnerability in Apache HTTP Server versions 2.4.0 through 2.4.55. It involves HTTP Request Smuggling\ndue to certain mod_proxy configurations combined with RewriteRule or ProxyPassMatch directives. This\nflaw can lead to bypassing access controls by an authenticated attacker.\n",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2023-25690",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-25690"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 8.1,
            "environmentalSeverity": "HIGH",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 8.1,
            "temporalSeverity": "HIGH",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-25690"
    },
    {
      "cve": "CVE-2023-38408",
      "cwe": {
        "id": "CWE-428",
        "name": "Unquoted Search Path or Element"
      },
      "notes": [
        {
          "category": "description",
          "text": "Vulnerability in the PKCS#11 feature of ssh-agent in OpenSSH versions before 9.3p2. It involves an \ninsufficiently trustworthy search path, which can lead to remote code execution if an agent is \nforwarded by authenticated user to an attacker-controlled system.\n",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD -CVE-2023-38408 ",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-38408"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 8.1,
            "environmentalSeverity": "HIGH",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 8.1,
            "temporalSeverity": "HIGH",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-38408"
    },
    {
      "cve": "CVE-2016-10009",
      "cwe": {
        "id": "CWE-426",
        "name": "Untrusted Search Path"
      },
      "notes": [
        {
          "category": "description",
          "text": "Untrusted search path vulnerability in ssh-agent.c in ssh-agent in OpenSSH before 7.4 allows remote\nattackers to execute arbitrary local PKCS#11 modules by leveraging control over a forwarded agent socket.\n",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2016-10009",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2016-10009"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "LOW",
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "LOW",
            "environmentalScore": 5.8,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "LOW",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 5.8,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2016-10009"
    },
    {
      "cve": "CVE-2022-2526",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "description",
          "text": "A use-after-free vulnerability was found in system. This issue occurs due to the on_stream_io() function and dns_stream_complete() function in \u0027resolved-dns-stream.c\u0027 not incrementing the reference counting for the DnsStream object. Therefore, other functions and callbacks called can dereference the DNSStream object, causing the use-after-free when the reference is still used later, allowing authenticated user to execute arbitrary code.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2022-2526",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-2526"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 7.8,
            "environmentalSeverity": "HIGH",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "REASONABLE",
            "scope": "UNCHANGED",
            "temporalScore": 7.8,
            "temporalSeverity": "HIGH",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:W/RC:R",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-2526"
    },
    {
      "cve": "CVE-2022-37434",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "description",
          "text": "zlib through 1.2.12 has a heap-based buffer over-read or buffer overflow in inflate in inflate.c via a large gzip header extra field, potentially allowing an authenticated attacker to reveal sensitive information or to cause a denial-of-service situation.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2022-37434",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-37434"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 8.1,
            "environmentalSeverity": "HIGH",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 8.1,
            "temporalSeverity": "HIGH",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-37434"
    },
    {
      "cve": "CVE-2023-20032",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "description",
          "text": "A vulnerability in the HFS+ partition file parser of ClamAV versions 1.0.0 and earlier, 0.105.1 and earlier, and 0.103.7 and earlier could allow an unauthenticated, remote attacker to execute arbitrary code. This vulnerability is due to a missing buffer size check that may result in a heap buffer overflow write. An authenticated attacker could exploit this vulnerability by submitting a crafted HFS+ partition file to be scanned by ClamAV on an affected device.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2023-20032",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-20032"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 7.2,
            "environmentalSeverity": "HIGH",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 7.2,
            "temporalSeverity": "HIGH",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-20032"
    },
    {
      "cve": "CVE-2022-38177",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "description",
          "text": "By spoofing the target resolver with responses that have a malformed ECDSA signature, an attacker can trigger a small memory leak. It is possible to gradually erode available memory to the point where named crashes for lack of resources.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD- CVE-2022-38177",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-38177"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "\nMitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n3.\tARM600 system is by default not dependent on the name service (DNS). If name service is not used in the system, the name service port (TCP/UDP port 53) can be blocked by a firewall.\n\n\nRefer to section General security recommendations for additional advice on how to keep your system secure.\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "environmentalScore": 6.9,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 6.9,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-38177"
    },
    {
      "cve": "CVE-2022-38178",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "description",
          "text": "By spoofing the target resolver with responses that have a malformed EdDSA signature, an attacker can trigger a small memory leak. It is possible to gradually erode available memory to the point where named crashes for lack of resources.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD -CVE-2022-38178",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-38178"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "\nMitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n3.\tARM600 system is by default not dependent on the name service (DNS). If name service is not used in the system, the name service port (TCP/UDP port 53) can be blocked by a firewall.\n\n\nRefer to section General security recommendations for additional advice on how to keep your system secure.\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "environmentalScore": 6.9,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 6.9,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-38178"
    },
    {
      "cve": "CVE-2023-2828",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "description",
          "text": "The vulnerability allows the configured max-cache-size limit to be significantly exceeded by querying the resolver for specific RRsets in a certain order. This can lead to a denial-of-service condition by ex-hausting all available memory on the host running named service.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD- CVE-2023-2828",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-2828"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "\nMitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n3.\tARM600 system is by default not dependent on the name service (DNS). If name service is not used in the system, the name service port (TCP/UDP port 53) can be blocked by a firewall.\n\n\nRefer to section General security recommendations for additional advice on how to keep your system secure.\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "environmentalScore": 6,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 6,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-2828"
    },
    {
      "cve": "CVE-2023-3341",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "description",
          "text": "The vulnerability involves the recursive processing of control channel messages sent to named, which can exhaust stack memory and cause named to terminate unexpectedly. Exploiting this flaw requires only network access to the control channel\u0027s configured TCP port, without needing a valid RNDC key.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2023-3341",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-3341"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "\nMitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n3.\tARM600 system is by default not dependent on the name service (DNS). If name service is not used in the system, the name service port (TCP/UDP port 53) can be blocked by a firewall.\n\n\nRefer to section General security recommendations for additional advice on how to keep your system secure.\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "environmentalScore": 6.9,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 6.9,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-3341"
    },
    {
      "cve": "CVE-2022-41974",
      "cwe": {
        "id": "CWE-269",
        "name": "Improper Privilege Management"
      },
      "notes": [
        {
          "category": "description",
          "text": "Local users able to write to UNIX domain sockets can bypass access controls and manipulate the mul-tipath setup. This can lead to local privilege escalation to root. This occurs because an attacker can repeat a keyword, which is mishandled because arithmetic ADD is used instead of bitwise OR.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD -CVE-2022-41974",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-41974"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 7.2,
            "environmentalSeverity": "HIGH",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 7.2,
            "temporalSeverity": "HIGH",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-41974"
    },
    {
      "cve": "CVE-2022-40674",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "description",
          "text": "Local users can write to UNIX domain sockets can bypass access controls and manipulate the multipath setup. This can lead to local privilege escalation to root. This occurs because an attacker can repeat a keyword, which is mishandled because arithmetic ADD is used instead of bitwise OR.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2022-40674",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-40674"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 6.9,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 6.9,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-40674"
    },
    {
      "cve": "CVE-2023-25652",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "description",
          "text": "By feeding specially crafted input as authenticated attacker to `git apply --reject`, a path outside the working tree can be overwritten with partially controlled contents, leading to potential arbitrary code execution.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD- CVE-2023-25652",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-25652"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "environmentalScore": 6.9,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "NONE",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 6.9,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-25652"
    },
    {
      "cve": "CVE-2023-29007",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "description",
          "text": "A specially crafted `.gitmodules` file with submodule URLs that are longer than 1024 characters can used to exploit a bug in `config.c::git_config_copy_or_rename_section_in_file()`. This bug can be used to inject arbitrary configuration into a user\u0027s `$GIT_DIR/config` when attempting to remove the con-figuration section associated with that submodule. When the attacker injects configuration values which specify executables to run (such as `core.pager`, `core.editor`, `core.sshCommand`, etc.) this can lead to a remote code execution.",
          "title": "CVE Decsription"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD- CVE-2023-29007",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-29007"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 6.7,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 6.7,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-29007"
    },
    {
      "cve": "CVE-2022-2964",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "description",
          "text": "A flaw was found in the Linux kernel\u2019s driver for the ASIX AX88179_178A-based USB 2.0/3.0 Gigabit Ethernet Devices. The vulnerability contains multiple out-of-bounds reads and possible out-of-bounds writes.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2022-2964",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-2964"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n\n15.\tAvoid using AX88179_178A chipset-based USB -to-Ethernet devices.\n\n\n\nRefer to section General security recommendations for additional advice on how to keep your system secure.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 6.7,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 6.7,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-2964"
    },
    {
      "cve": "CVE-2021-26401",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "description",
          "text": "Flaw in certain AMD EPYC, Ryzen, Threadripper and Athlon processors considering LONGJMP assembly command. This could lead to arbitrary code execution. Note: ARM600 servers include Intel processors, but there may be ARM600 SW installations running in AMD processor environments.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2021-26401",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2021-26401"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n\n14.\tIn ARM600SW installations, avoid servers with AMD processors vulnerable to the following: CVE-2021-26401, CVE-2023-20569 and CVE-2023-20593.\n\nRefer to section General security recommendations for additional advice on how to keep your system secure.\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "LOCAL",
            "availabilityImpact": "NONE",
            "baseScore": 5.6,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 5.2,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "CHANGED",
            "temporalScore": 5.2,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2021-26401"
    },
    {
      "cve": "CVE-2022-4378",
      "cwe": {
        "id": "CWE-131",
        "name": "Incorrect Calculation of Buffer Size"
      },
      "notes": [
        {
          "category": "description",
          "text": "A stack overflow flaw was found in the Linux kernel\u0027s SYSCTL subsystem in how an authenticated user changes certain kernel parameters and variables. This flaw allows a local user to crash or potentially escalate their privileges on the system.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD- CVE-2022-4378",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-4378"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 7.2,
            "environmentalSeverity": "HIGH",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 7.2,
            "temporalSeverity": "HIGH",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-4378"
    },
    {
      "cve": "CVE-2022-42703",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "description",
          "text": "mm/rmap.c in the Linux kernel before 5.19.7 has a use-after-free related to leaf anon_vma double re-use. This could lead to a system crash or elevation of privileges.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2022-42703",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-42703"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "environmentalScore": 4.1,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "NONE",
            "privilegesRequired": "HIGH",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 4.1,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-42703"
    },
    {
      "cve": "CVE-2022-3564",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "description",
          "text": "A vulnerability classified as critical was found in Linux Kernel. Affected by this vulnerability is the function l2cap_reassemble_sdu of the file net/bluetooth/l2cap_core.c of the component Bluetooth. The manipulation leads to use after free. This could cause leaking of data or Denial of Service (DoS) conditions.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - cve-2022-3564",
          "url": "https://nvd.nist.gov/vuln/detail/cve-2022-3564"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 6.3,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 6.3,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-3564"
    },
    {
      "cve": "CVE-2023-32233",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "description",
          "text": "In the Linux kernel through 6.3.1, a use-after-free in Netfilter nf_tables when processing batch requests can be abused to perform arbitrary read and write operations on kernel memory. This could lead to an unprivileged local user gaining root access.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2023-32233",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-32233"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 7.2,
            "environmentalSeverity": "HIGH",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 7.2,
            "temporalSeverity": "HIGH",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-32233"
    },
    {
      "cve": "CVE-2023-35001",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "description",
          "text": "Kernel nftables Out-Of-Bounds Read/Write Vulnerability; nft_byteorder poorly handled vm register contents when CAP_NET_ADMIN is in any user or network namespace. This vulnerability could lead to local user privilege escalation.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2023-35001",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-35001"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 7.2,
            "environmentalSeverity": "HIGH",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 7.2,
            "temporalSeverity": "HIGH",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-35001"
    },
    {
      "cve": "CVE-2023-3609",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "description",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: cls_u32 component can be exploited to achieve local user privilege escalation.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2023-3609",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-3609"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 7.2,
            "environmentalSeverity": "HIGH",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 7.2,
            "temporalSeverity": "HIGH",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-3609"
    },
    {
      "cve": "CVE-2023-42753",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "description",
          "text": "A missing netfilter macro could lead to a miscalculation of the `h-\u003enets` array offset, providing attack-ers with the primitive to arbitrarily increment/decrement a memory buffer out-of-bounds. This vulnerability may allow a local user to crash the system or potentially escalate their privileges.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2023-42753",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-42753"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 7.2,
            "environmentalSeverity": "HIGH",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 7.2,
            "temporalSeverity": "HIGH",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-42753"
    },
    {
      "cve": "CVE-2022-42898",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "description",
          "text": "PAC parsing in krb5 has integer overflows that may lead to denial of service.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - cve-2022-42898",
          "url": "https://nvd.nist.gov/vuln/detail/cve-2022-42898"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 8,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 7.3,
            "environmentalSeverity": "HIGH",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 7.3,
            "temporalSeverity": "HIGH",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-42898"
    },
    {
      "cve": "CVE-2020-22218",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "description",
          "text": "An issue was discovered in function _libssh2_packet_add in libssh2 that allows attackers to access out of bounds memory. This could lead to a system crash by authenticated attacker.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD- CVE-2020-22218",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-22218"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "environmentalScore": 6,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 6,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2020-22218"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "description",
          "text": "X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE.  When CRL checking is enabled, this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD- CVE-2023-0286",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-0286"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.4,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 5.9,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 5.9,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:H/I:N/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-24329",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "description",
          "text": "An issue in the urllib.parse component of Python allows attackers to bypass blocklisting methods by supplying a URL that starts with blank characters. Successful exploitation of this vulnerability could lead to addition or modification of data by an authenticated attacker.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2023-24329",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-24329"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "environmentalScore": 6,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 6,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-24329"
    },
    {
      "cve": "CVE-2022-29154",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "description",
          "text": "Remote arbitrary files write inside the directories of connecting peers. A malicious rsync server can overwrite arbitrary files in the rsync client target directory and subdirectories.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD- CVE-2022-29154",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-29154"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "environmentalScore": 6.3,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 6.3,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-29154"
    },
    {
      "cve": "CVE-2023-22809",
      "cwe": {
        "id": "CWE-269",
        "name": "Improper Privilege Management"
      },
      "notes": [
        {
          "category": "description",
          "text": "The sudoedit (aka -e) feature mishandles extra arguments passed in the user-provided environment variables (SUDO_EDITOR, VISUAL, and EDITOR), allowing a local attacker to append arbitrary entries to the list of files to process. This could lead to privilege escalation.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2023-22809",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-22809"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 7.2,
            "environmentalSeverity": "HIGH",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 7.2,
            "temporalSeverity": "HIGH",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-22809"
    },
    {
      "cve": "CVE-2022-25147",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "description",
          "text": "Apache portable runtime utility issue may allow a malicious attacker to cause an out-of-bounds write due to an integer overflow when encoding/decoding a very long string using the base64 family of functions. This could lead to modification of data or denial of service.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2022-25147",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-25147"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "LOW",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "environmentalScore": 6,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "LOW",
            "privilegesRequired": "NONE",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 6,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:L/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-25147"
    },
    {
      "cve": "CVE-2021-25220",
      "cwe": {
        "id": "CWE-444",
        "name": "Inconsistent Interpretation of HTTP Requests (\u0027HTTP Request/Response Smuggling\u0027)"
      },
      "notes": [
        {
          "category": "description",
          "text": "When using forwarders, bogus NS records supplied by, or via, those forwarders may be cached and used by named if it needs to recurse for any reason, causing it to obtain and pass on potentially incor-rect answers. This could cause DNS cache poisoning that could potentially lead to a denial of service and information disclosure by an authenticated attacker.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD- CVE-2021-25220",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2021-25220"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "\nMitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n3.\tARM600 system is by default not dependent on the name service (DNS). If name service is not used in the system, the name service port (TCP/UDP port 53) can be blocked by a firewall.\n\n\nRefer to section General security recommendations for additional advice on how to keep your system secure.\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "environmentalScore": 6.3,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "HIGH",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "CHANGED",
            "temporalScore": 6.3,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:N/I:H/A:N/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2021-25220"
    },
    {
      "cve": "CVE-2022-2795",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "description",
          "text": "Processing large delegations may severely degrade resolver performance effectively denying legitimate clients access to the DNS resolution service. This could cause a denial-of-service conditions.",
          "title": "CVE Descritpion"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2022-2795",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-2795"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "\nMitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n3.\tARM600 system is by default not dependent on the name service (DNS). If name service is not used in the system, the name service port (TCP/UDP port 53) can be blocked by a firewall.\n\n\nRefer to section General security recommendations for additional advice on how to keep your system secure.\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "LOW",
            "baseScore": 2.7,
            "baseSeverity": "LOW",
            "confidentialityImpact": "NONE",
            "environmentalScore": 2.5,
            "environmentalSeverity": "LOW",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "NONE",
            "privilegesRequired": "HIGH",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 2.5,
            "temporalSeverity": "LOW",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:L/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-2795"
    },
    {
      "cve": "CVE-2022-43750",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "description",
          "text": "drivers/usb/mon/mon_bin.c in usbmon in the Linux kernel allows a user-space client to corrupt the monitor\u0027s internal memory. This could lead to denial-of-service or information disclosure conditions by an authenticated attacker.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD- CVE-2022-43750",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2022-43750"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 6.2,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "HIGH",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 6.2,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-43750"
    },
    {
      "cve": "CVE-2023-20569",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "description",
          "text": "Return Address Predictor vulnerability leading to information disclosure in certain AMD processors. This may result in speculative execution at an attacker-controlled\u202faddress, potentially leading to information disclosure. Note: ARM600 servers utilize Intel processors, but there may be ARM600 SW installations running in AMD processor environments.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD- CVE-2023-20569",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-20569"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n\n14.\tIn ARM600SW installations, avoid servers with AMD processors vulnerable to the following: CVE-2021-26401, CVE-2023-20569 and CVE-2023-20593.\n\nRefer to section General security recommendations for additional advice on how to keep your system secure.\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "LOCAL",
            "availabilityImpact": "NONE",
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 4.3,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 4.3,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-20569"
    },
    {
      "cve": "CVE-2023-20593",
      "cwe": {
        "id": "CWE-209",
        "name": "Generation of Error Message Containing Sensitive Information"
      },
      "notes": [
        {
          "category": "description",
          "text": "Cross-Process Information Leak in certain AMD processors. This could lead to an attacker potentially accessing confidential information. Note: ARM600 servers utilize Intel processors, but there may be ARM600 SW installations running in AMD processor environments.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-2023-20593",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-20593"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "NONE",
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 5.1,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 5.1,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-20593"
    },
    {
      "cve": "CVE-2023-40217",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "description",
          "text": "If a TLS server side socket is created, receives data, and then closes quickly, there\u0027s a brief window where the SSLSocket instance detects it as \"not connected\" and won\u0027t initiate a handshake. Buffered data remains readable but unauthenticated if client certificate authentication is expected. This data is limited to the buffer size. An unauthenticated attacker could exploit this vulnerability for revealing sensitive information from the server.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD- CVE-2023-40217",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-40217"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "LOW",
            "environmentalScore": 4.9,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 4.9,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-40217"
    },
    {
      "cve": "CVE-2023-48795",
      "cwe": {
        "id": "CWE-354",
        "name": "Improper Validation of Integrity Check Value"
      },
      "notes": [
        {
          "category": "description",
          "text": "Remote attackers may bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD- CVE-2023-48795",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-48795"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "environmentalScore": 5.4,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "NONE",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 5.4,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-48795"
    },
    {
      "cve": "CVE-2013-0169",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "description",
          "text": "TLS protocol version 1.1 and 1.2 and the DTLS protocol 1.0 and 1.2 do not properly consider timing side-channel attacks on a MAC check requirement during the processing of malformed CBC padding, which allows remote attackers to conduct distinguishing attacks and plaintext-recovery attacks via statistical analysis of timing data for crafted packets, aka the \"Lucky Thirteen\" issue.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD- CVE-2013-0169",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2013-0169"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "LOW",
            "environmentalScore": 6,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "HIGH",
            "privilegesRequired": "NONE",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 6,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:H/A:N/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2013-0169"
    },
    {
      "cve": "CVE-2012-4929",
      "cwe": {
        "id": "CWE-212",
        "name": "Improper Removal of Sensitive Information Before Storage or Transfer"
      },
      "notes": [
        {
          "category": "description",
          "text": "The TLS protocol 1.2 and earlier can encrypt compressed data without properly obfuscating the length of the unencrypted data, which allows man-in-the-middle attackers to obtain plaintext HTTP headers by observing length differences during a series of guesses in which a string in an HTTP request potentially matches an unknown string in an HTTP header, aka a \"CRIME\" attack.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD-CVE-2012-4929",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2012-4929"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n1.\tObtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn\u2019t expose the traffic between remote sites and main site to the internet but rather uses cellular operator\u2019s private wide area network (WAN). Therefore, the ARM600 wouldn\u2019t need open ports to the internet.\n\n2.\tAvoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client).\n\n4.\tPerform firewall configuration by the \"allowlisting\" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic.\n\n\n6.\tIf the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ).\n\n7.\tChange the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system.\n\n\n8.\tUse administrator (i.e., root user) privileges only when required by the task.\n\n\n9.\tSupporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. \n\nAny data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring.\n\n\n10.\tIntroduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following:\na.\tCheck that the entire system has backups available from all applicable parts.\nb.\tStore the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms.\nc.\tEnsure the security of the configuration PCs that may have local copies of device configurations.\nd.\tValidate the backups to make sure that they\u2019re working.\n\n\n11.\tFollow cyber security best practices for installation, operation, and decommissioning as described in the product\u2019s Cyber Security Deployment Guideline and User Manual.\n\n\n12.\tUse continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system\n\n\n13.\tConsider hardening the system according to the following:\na.\tRemove any unnecessary communication links in the system.\nb.\tIf possible, close unused physical ports.\nc.\tOpen only the necessary TCP/UDP ports in the configuration.\nd.\tRemove all unnecessary user accounts.\ne.\tRestrict traffic by firewall.\nf.\tAllow the traffic only from/to necessary hosts\u0027 IP addresses (i.e., define both source and destination in the firewall rules, where possible).\ng.\tDefine client IP address as allowed address in SCADA communication protocols, if such configuration is supported.\nh.\tRemove or deactivate all unused processes, communication ports and services, where possible.\ni.\tUse physical access controls to the system installations (e.g., to server rooms and device cabinets). \n\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "confidentialityImpact": "LOW",
            "environmentalScore": 3.4,
            "environmentalSeverity": "LOW",
            "exploitCodeMaturity": "PROOF_OF_CONCEPT",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "remediationLevel": "WORKAROUND",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 3.4,
            "temporalSeverity": "LOW",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:W/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2012-4929"
    },
    {
      "cve": "CVE-1999-0524",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "description",
          "text": "The \u201cICMP Timestamp Request Remote Date Disclosure\u201d vulnerability involves the use of ICMP (internet Control Message Protocol) to request and receive timestamp information from a target system.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "NVD - CVE-1999-0524",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-1999-0524"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "\nMitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended.\n\n5.\tFilter specific ICMP packets from external systems (ICMP type 13 and 14) by firewall for not exposing the system time.\n\nRefer to section General security recommendations for additional advice on how to keep your system secure.\n",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "LOW",
            "environmentalScore": 5,
            "environmentalSeverity": "MEDIUM",
            "exploitCodeMaturity": "FUNCTIONAL",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "remediationLevel": "TEMPORARY_FIX",
            "reportConfidence": "CONFIRMED",
            "scope": "UNCHANGED",
            "temporalScore": 5,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:F/RL:T/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-1999-0524"
    }
  ]
}

{
  "document": {
    "category": "csaf_vex",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Public",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en-US",
    "notes": [
      {
        "category": "general",
        "text": "To determine the support lifecycle for your software, see the Microsoft Support Lifecycle: https://support.microsoft.com/lifecycle",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "The information provided in the Microsoft Knowledge Base is provided \\\"as is\\\" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.",
        "title": "Disclaimer"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "secure@microsoft.com",
      "name": "Microsoft Security Response Center",
      "namespace": "https://msrc.microsoft.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "CVE-2023-38408 The PKCS#11 feature in ssh-agent in OpenSSH before 9.3p2 has an insufficiently trustworthy search path leading to remote code execution if an agent is forwarded to an attacker-controlled system. (Code in /usr/lib is not necessarily safe for loading into ssh-agent.) NOTE: this issue exists because of an incomplete fix for CVE-2016-10009. - VEX",
        "url": "https://msrc.microsoft.com/csaf/vex/2023/msrc_cve-2023-38408.json"
      },
      {
        "category": "external",
        "summary": "Microsoft Support Lifecycle",
        "url": "https://support.microsoft.com/lifecycle"
      },
      {
        "category": "external",
        "summary": "Common Vulnerability Scoring System",
        "url": "https://www.first.org/cvss"
      }
    ],
    "title": "The PKCS#11 feature in ssh-agent in OpenSSH before 9.3p2 has an insufficiently trustworthy search path leading to remote code execution if an agent is forwarded to an attacker-controlled system. (Code in /usr/lib is not necessarily safe for loading into ssh-agent.) NOTE: this issue exists because of an incomplete fix for CVE-2016-10009.",
    "tracking": {
      "current_release_date": "2023-07-31T00:00:00.000Z",
      "generator": {
        "date": "2025-12-27T16:55:11.573Z",
        "engine": {
          "name": "MSRC Generator",
          "version": "1.0"
        }
      },
      "id": "msrc_CVE-2023-38408",
      "initial_release_date": "2023-07-01T07:00:00.000Z",
      "revision_history": [
        {
          "date": "2023-07-31T00:00:00.000Z",
          "legacy_version": "1",
          "number": "1",
          "summary": "Information published."
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version",
                "name": "1.0",
                "product": {
                  "name": "CBL Mariner 1.0",
                  "product_id": "16820"
                }
              },
              {
                "category": "product_version",
                "name": "2.0",
                "product": {
                  "name": "CBL Mariner 2.0",
                  "product_id": "17086"
                }
              }
            ],
            "category": "product_name",
            "name": "Azure Linux"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003ccm1 openssh 8.9p1-3",
                "product": {
                  "name": "\u003ccm1 openssh 8.9p1-3",
                  "product_id": "2"
                }
              },
              {
                "category": "product_version",
                "name": "cm1 openssh 8.9p1-3",
                "product": {
                  "name": "cm1 openssh 8.9p1-3",
                  "product_id": "17825"
                }
              },
              {
                "category": "product_version_range",
                "name": "\u003ccbl2 openssh 8.9p1-1",
                "product": {
                  "name": "\u003ccbl2 openssh 8.9p1-1",
                  "product_id": "1"
                }
              },
              {
                "category": "product_version",
                "name": "cbl2 openssh 8.9p1-1",
                "product": {
                  "name": "cbl2 openssh 8.9p1-1",
                  "product_id": "17826"
                }
              }
            ],
            "category": "product_name",
            "name": "openssh"
          }
        ],
        "category": "vendor",
        "name": "Microsoft"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "\u003ccm1 openssh 8.9p1-3 as a component of CBL Mariner 1.0",
          "product_id": "16820-2"
        },
        "product_reference": "2",
        "relates_to_product_reference": "16820"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "cm1 openssh 8.9p1-3 as a component of CBL Mariner 1.0",
          "product_id": "17825-16820"
        },
        "product_reference": "17825",
        "relates_to_product_reference": "16820"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "\u003ccbl2 openssh 8.9p1-1 as a component of CBL Mariner 2.0",
          "product_id": "17086-1"
        },
        "product_reference": "1",
        "relates_to_product_reference": "17086"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "cbl2 openssh 8.9p1-1 as a component of CBL Mariner 2.0",
          "product_id": "17826-17086"
        },
        "product_reference": "17826",
        "relates_to_product_reference": "17086"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-38408",
      "cwe": {
        "id": "CWE-428",
        "name": "Unquoted Search Path or Element"
      },
      "notes": [
        {
          "category": "general",
          "text": "mitre",
          "title": "Assigning CNA"
        }
      ],
      "product_status": {
        "fixed": [
          "17825-16820",
          "17826-17086"
        ],
        "known_affected": [
          "16820-2",
          "17086-1"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "CVE-2023-38408 The PKCS#11 feature in ssh-agent in OpenSSH before 9.3p2 has an insufficiently trustworthy search path leading to remote code execution if an agent is forwarded to an attacker-controlled system. (Code in /usr/lib is not necessarily safe for loading into ssh-agent.) NOTE: this issue exists because of an incomplete fix for CVE-2016-10009. - VEX",
          "url": "https://msrc.microsoft.com/csaf/vex/2023/msrc_cve-2023-38408.json"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2023-07-31T00:00:00.000Z",
          "details": "8.9p1-3:Security Update:https://learn.microsoft.com/en-us/azure/azure-linux/tutorial-azure-linux-upgrade",
          "product_ids": [
            "16820-2"
          ],
          "url": "https://learn.microsoft.com/en-us/azure/azure-linux/tutorial-azure-linux-upgrade"
        },
        {
          "category": "vendor_fix",
          "date": "2023-07-31T00:00:00.000Z",
          "details": "-:Security Update:https://learn.microsoft.com/en-us/azure/azure-linux/tutorial-azure-linux-upgrade",
          "product_ids": [
            "17086-1"
          ],
          "url": "https://learn.microsoft.com/en-us/azure/azure-linux/tutorial-azure-linux-upgrade"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "confidentialityImpact": "HIGH",
            "environmentalsScore": 0.0,
            "integrityImpact": "HIGH",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "temporalScore": 9.8,
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "16820-2",
            "17086-1"
          ]
        }
      ],
      "title": "The PKCS#11 feature in ssh-agent in OpenSSH before 9.3p2 has an insufficiently trustworthy search path leading to remote code execution if an agent is forwarded to an attacker-controlled system. (Code in /usr/lib is not necessarily safe for loading into ssh-agent.) NOTE: this issue exists because of an incomplete fix for CVE-2016-10009."
    }
  ]
}