CWE-400
Weakness DiscouragedUncontrolled Resource Consumption
Abstraction: Class · Status: Draft
The product does not properly control the allocation and maintenance of a limited resource.
Dimensions
- Behavior-Property: Uncontrolled
- Behavior-Type: Consumption
- Resource-Type: Resource
Mapping guidance
CWE-400 is intended for incorrect behaviors in which the product is expected to track and restrict how many resources it consumes, but CWE-400 is often misused because it is conflated with the "technical impact" of vulnerabilities in which resource consumption occurs. It is sometimes used for low-information vulnerability reports. It is a level-1 Class (i.e., a child of a Pillar).
Closely analyze the specific mistake that is causing resource consumption, and perform a CWE mapping for that mistake. Consider children/descendants.
Modes of introduction
The product could be operated in a system or environment with lower resource limits than expected, which might make it easier for attackers to consume all available resources.
The product could be configured with lower resource limits than expected, which might make it easier for attackers to consume all available resources.
The designer might not consider how to handle and throttle excessive resource requests, which typically requires careful planning to handle more gracefully than a crash or exit.
There are at least three distinct scenarios that can commonly lead to resource exhaustion:
Lack of throttling for the number of allocated resources.
Losing all references to a resource before reaching the shutdown stage.
Not closing/returning a resource after processing.
Resource exhaustion problems often occur due to an incorrect implementation of the following situations:
Error conditions and other exceptional circumstances.
Confusion over which part of the program is responsible for releasing the resource.
Detection methods
Automated Static Analysis
Automated static analysis typically has limited utility in recognizing resource exhaustion problems, except for program-independent system resources such as files, sockets, and processes. For system resources, automated static analysis may be able to detect circumstances in which resources are not released after they have expired. Automated analysis of configuration files may be able to detect settings that do not specify a maximum value.
Automated static analysis tools will not be appropriate for detecting exhaustion of custom resources, such as an intended security policy in which a bulletin board user is only allowed to make a limited number of posts per day.
Effectiveness: Limited
Automated Dynamic Analysis
Certain automated dynamic analysis techniques may be effective in spotting resource exhaustion problems, especially with resources such as processes, memory, and connections. The technique may involve generating a large number of requests to the product within a short time frame.
Effectiveness: Moderate
Fuzzing
While fuzzing is typically geared toward finding low-level implementation bugs, it can inadvertently find resource exhaustion problems. This can occur when the fuzzer generates a large number of test cases but does not restart the targeted product in between test cases. If an individual test case produces a crash, but it does not do so reliably, then an inability to handle resource exhaustion may be the cause.
Effectiveness: Opportunistic
Notes
Theoretical
Vulnerability theory is largely about how behaviors and resources interact. "Resource exhaustion" can be regarded as either a consequence or an attack, depending on the perspective. This entry is an attempt to reflect the underlying weaknesses that enable these attacks (or consequences) to take place.
Other
Database queries that take a long time to process are good DoS targets. An attacker would have to write a few lines of code to generate enough traffic to exceed the site's ability to keep up. This would effectively prevent authorized users from using the site at all. Resources can be exploited simply by ensuring that the target machine must do much more work and consume more resources in order to service a request than the attacker must do to initiate a request.
A prime example of this can be found in old switches that were vulnerable to "macof" attacks (so named for a tool developed by Dugsong). These attacks flooded a switch with random IP and MAC address combinations, therefore exhausting the switch's cache, which held the information of which port corresponded to which MAC addresses. Once this cache was exhausted, the switch would fail in an insecure way and would begin to act simply as a hub, broadcasting all traffic on all ports and allowing for basic sniffing attacks.
Limited resources include memory, file system storage, database connection pool entries, CPU, and others.
Content history
Suggested mappings to ISA/IEC 62443.
Suggested mappings to ISA/IEC 62443.
Provided diagram to improve CWE usability.
updated Time_of_Introduction
Suggested OWASP Top Ten 2004 mapping
updated Common_Consequences, Relationships, Other_Notes, Taxonomy_Mappings
updated Description, Name, Relationships
updated Description
updated Name, Relationships
updated Description, Relationships
updated Relationships
updated Common_Consequences, Demonstrative_Examples, Detection_Factors, Likelihood_of_Exploit, Observed_Examples, Other_Notes, Potential_Mitigations, References
updated Detection_Factors, Potential_Mitigations, References, Taxonomy_Mappings
updated Related_Attack_Patterns
updated Description
updated Demonstrative_Examples
updated Common_Consequences, Relationships, Taxonomy_Mappings
updated Demonstrative_Examples, Related_Attack_Patterns, Relationships, Taxonomy_Mappings
updated Relationships
updated Relationships, Taxonomy_Mappings
updated Related_Attack_Patterns, Relationships
updated Relationships
updated Applicable_Platforms, Demonstrative_Examples, Likelihood_of_Exploit, Potential_Mitigations, References, Relationships
updated References, Type
updated Alternate_Terms, Description, Name, Relationships, Taxonomy_Mappings, Theoretical_Notes
updated Related_Attack_Patterns, Relationships
updated Description, Relationships
updated Description, References, Related_Attack_Patterns, Relationships
updated Description, Maintenance_Notes
updated Relationships
updated Related_Attack_Patterns
updated Observed_Examples, Relationships
updated Observed_Examples, Relationships
updated Common_Consequences, Description, Detection_Factors, Maintenance_Notes, Related_Attack_Patterns, Taxonomy_Mappings
updated Demonstrative_Examples, Relationships, Taxonomy_Mappings
updated Mapping_Notes, Relationships
updated Relationships
updated Common_Consequences, Description, Diagram, Modes_of_Introduction, Other_Notes, Time_of_Introduction
updated Observed_Examples, References
updated Applicable_Platforms, Maintenance_Notes, Weakness_Ordinalities
updated Applicable_Platforms, Maintenance_Notes, Mapping_Notes, Other_Notes
updated Applicable_Platforms, Dimensions, References, Relationships, Taxonomy_Mappings
7197 vulnerabilities reference this CWE, most recent first.
CVE-2026-62250 (GCVE-0-2026-62250)
Vulnerability from cvelistv5 – Published: 2026-10-30 20:37 – Updated: 2026-10-30 22:12| URL | Tags |
|---|---|
| https://github.com/LibreDWG/libredwg/security/adv… | x_refsource_CONFIRM |
| https://github.com/LibreDWG/libredwg/issues/1131 | x_refsource_MISC |
| https://github.com/LibreDWG/libredwg/commit/4e149… | x_refsource_MISC |
| https://github.com/LibreDWG/libredwg/releases/tag… | x_refsource_MISC |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-62250",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-30T21:18:21.594623Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-10-30T22:12:48.952Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "libredwg",
"vendor": "LibreDWG",
"versions": [
{
"status": "affected",
"version": "\u003c 0.14.8413"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "LibreDWG is a free C library to read and write DWG files. Prior to 0.14.8413, a crafted pre-R13 DWG can make `decode_preR13_entities()` in `src/decode.c` enter a nonterminating loop that allocates a new object each iteration. `decode_preR13` in `src/decode_r11.c` computes `size` from the raw file-controlled `entities_start` and `entities_end` header bounds; the callee clamps `end` to `dat-\u003esize` but never recalculates `size`. At `end` of input, `bit_read_RC` and `bit_read_RS` stop advancing `dat-\u003ebyte`, the overflow guard fails because `end` equals `dat-\u003esize`, and the no-advance check compares against `oldpos` saved before the loop instead of the previous iteration. This leaves repeated allocation of `dwg-\u003eobject` entries until allocation fails or the process is OOM-killed, not merely a constant-memory CPU hang. The defect remains after the clamping and no-progress changes associated with the earlier issue 1131. Applications and tools calling `dwg_read_file()` on untrusted files, including `dwg2dxf`, `dwgread` and `dwg2svg`, can suffer denial of service when a user or automated pipeline opens a malformed file; no attacker credentials are required. This issue is fixed in repository nightly version 0.14.8413."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 5.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "REQUIRED",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
"version": "3.1"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-835",
"description": "CWE-835: Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400: Uncontrolled Resource Consumption",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-30T20:37:47.927Z",
"orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"shortName": "GitHub_M"
},
"references": [
{
"name": "https://github.com/LibreDWG/libredwg/security/advisories/GHSA-7625-26gc-xqvp",
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://github.com/LibreDWG/libredwg/security/advisories/GHSA-7625-26gc-xqvp"
},
{
"name": "https://github.com/LibreDWG/libredwg/issues/1131",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/LibreDWG/libredwg/issues/1131"
},
{
"name": "https://github.com/LibreDWG/libredwg/commit/4e14952c43be5b8feff6e54a61af3425d6ca95a4",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/LibreDWG/libredwg/commit/4e14952c43be5b8feff6e54a61af3425d6ca95a4"
},
{
"name": "https://github.com/LibreDWG/libredwg/releases/tag/0.14.8413",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/LibreDWG/libredwg/releases/tag/0.14.8413"
}
],
"source": {
"advisory": "GHSA-7625-26gc-xqvp",
"discovery": "UNKNOWN"
},
"title": "LibreDWG: unbounded allocation in pre-R13 DWG entity decoding"
}
},
"cveMetadata": {
"assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"assignerShortName": "GitHub_M",
"cveId": "CVE-2026-62250",
"datePublished": "2026-10-30T20:37:47.927Z",
"dateReserved": "2026-07-13T17:09:57.573Z",
"dateUpdated": "2026-10-30T22:12:48.952Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-62245 (GCVE-0-2026-62245)
Vulnerability from cvelistv5 – Published: 2026-11-18 19:38 – Updated: 2026-11-19 15:59- CWE-400 - Uncontrolled Resource Consumption
| URL | Tags |
|---|---|
| https://github.com/nordic-institute/X-Road/securi… | x_refsource_CONFIRM |
| https://github.com/nordic-institute/X-Road/pull/3614 | x_refsource_MISC |
| https://github.com/nordic-institute/X-Road/commit… | x_refsource_MISC |
| https://github.com/nordic-institute/X-Road/commit… | x_refsource_MISC |
| https://github.com/nordic-institute/X-Road/commit… | x_refsource_MISC |
| https://github.com/nordic-institute/X-Road/commit… | x_refsource_MISC |
| Vendor | Product | Version | |
|---|---|---|---|
| nordic-institute | X-Road |
Affected:
< 7.6.4
Affected: >= 7.7.0, < 7.7.3 Affected: >= 7.8.0, < 7.8.2 |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-62245",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-19T15:46:02.589573Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-19T15:59:10.472Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "X-Road",
"vendor": "nordic-institute",
"versions": [
{
"status": "affected",
"version": "\u003c 7.6.4"
},
{
"status": "affected",
"version": "\u003e= 7.7.0, \u003c 7.7.3"
},
{
"status": "affected",
"version": "\u003e= 7.8.0, \u003c 7.8.2"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "X-Road is open-source data exchange layer software. Prior to 7.8.2, 7.7.3, and 7.6.4, HashChainVerifier in the common-message module resolves attacker-controlled batch-signature hash chains before verifying the message signature and signing certificate, without cycle detection, recursion-depth or total-step limits, or per-step memoization. A registered ecosystem member can send a small crafted hashchain MIME part with repeated or cyclic StepRef values so that verifyHashChain() performs exponential work or unbounded recursion before authentication. Repeated requests can exhaust Security Server proxy threads and deny data-exchange service, and a self-reference can raise an uncaught error. This issue is fixed in versions 7.8.2, 7.7.3, and 7.6.4."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 6.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400: Uncontrolled Resource Consumption",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-18T19:38:37.110Z",
"orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"shortName": "GitHub_M"
},
"references": [
{
"name": "https://github.com/nordic-institute/X-Road/security/advisories/GHSA-rc33-88jw-c5jp",
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://github.com/nordic-institute/X-Road/security/advisories/GHSA-rc33-88jw-c5jp"
},
{
"name": "https://github.com/nordic-institute/X-Road/pull/3614",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/nordic-institute/X-Road/pull/3614"
},
{
"name": "https://github.com/nordic-institute/X-Road/commit/6a10bebafe6ede569ffe870b09b48108a80bc590",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/nordic-institute/X-Road/commit/6a10bebafe6ede569ffe870b09b48108a80bc590"
},
{
"name": "https://github.com/nordic-institute/X-Road/commit/e7434cdb1b02c82719926ed0b474109873475a13",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/nordic-institute/X-Road/commit/e7434cdb1b02c82719926ed0b474109873475a13"
},
{
"name": "https://github.com/nordic-institute/X-Road/commit/f02ac908057cffbd8ce0a596543f905758d45bdf",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/nordic-institute/X-Road/commit/f02ac908057cffbd8ce0a596543f905758d45bdf"
},
{
"name": "https://github.com/nordic-institute/X-Road/commit/f07c7269fd90d49bad898f8a375755c91549f53f",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/nordic-institute/X-Road/commit/f07c7269fd90d49bad898f8a375755c91549f53f"
}
],
"source": {
"advisory": "GHSA-rc33-88jw-c5jp",
"discovery": "UNKNOWN"
},
"title": "X-Road: Pre-authentication DoS in batch hash-chain verification on the Security Server"
}
},
"cveMetadata": {
"assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"assignerShortName": "GitHub_M",
"cveId": "CVE-2026-62245",
"datePublished": "2026-11-18T19:38:37.110Z",
"dateReserved": "2026-07-13T17:09:57.573Z",
"dateUpdated": "2026-11-19T15:59:10.472Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-62160 (GCVE-0-2026-62160)
Vulnerability from cvelistv5 – Published: 2026-10-30 18:26 – Updated: 2026-10-30 19:39| URL | Tags |
|---|---|
| https://github.com/daptin/daptin/security/advisor… | x_refsource_CONFIRM |
| https://github.com/daptin/daptin/commit/2d7095097… | x_refsource_MISC |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-62160",
"options": [
{
"Exploitation": "poc"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-30T19:38:29.984277Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-10-30T19:39:33.382Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"references": [
{
"tags": [
"exploit"
],
"url": "https://github.com/daptin/daptin/security/advisories/GHSA-rhj7-vh3v-mcq6"
}
],
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "daptin",
"vendor": "daptin",
"versions": [
{
"status": "affected",
"version": "\u003c 0.12.26"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "Daptin is a GraphQL/JSON-API headless CMS. Prior to 0.12.26, the global `LanguageMiddleware` in `server/language.go` passes the raw `Accept-Language` header from `LanguageMiddlewareFunc` through `GetLanguagePreference` to `golang.org/x/text/language.ParseAcceptLanguage` without a size or shape filter. The guard for CVE-2022-32149 counts hyphens but not underscores, even though the internal parser normalizes underscores to hyphens. Long lists of underscore-separated language subtags longer than eight characters bypass the guard. These subtags fail the `len \u003c= 8` length check in `golang.org/x/text/internal/language/parse.go`, causing repeated `gobble` operations to move the entire remaining buffer through `runtime.memmove`. With many invalid subtags, this repeated buffer movement takes quadratic work. Unauthenticated requests to the public landing page or `/api` can consume disproportionate CPU, with a 256 KiB header already causing seconds of processing and larger input permitted by the default 1 MiB header ceiling. `resource.CheckErr` also logs the entire invalid header, amplifying cost, while normal successful HTTP responses can conceal the denial-of-service traffic. Repeated requests can saturate server CPU. This issue is fixed in version 0.12.26."
}
],
"metrics": [
{
"cvssV4_0": {
"attackComplexity": "LOW",
"attackRequirements": "NONE",
"attackVector": "NETWORK",
"baseScore": 8.7,
"baseSeverity": "HIGH",
"privilegesRequired": "NONE",
"subAvailabilityImpact": "NONE",
"subConfidentialityImpact": "NONE",
"subIntegrityImpact": "NONE",
"userInteraction": "NONE",
"vectorString": "CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N",
"version": "4.0",
"vulnAvailabilityImpact": "HIGH",
"vulnConfidentialityImpact": "NONE",
"vulnIntegrityImpact": "NONE"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400: Uncontrolled Resource Consumption",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-407",
"description": "CWE-407: Inefficient Algorithmic Complexity",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-30T18:26:29.248Z",
"orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"shortName": "GitHub_M"
},
"references": [
{
"name": "https://github.com/daptin/daptin/security/advisories/GHSA-rhj7-vh3v-mcq6",
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://github.com/daptin/daptin/security/advisories/GHSA-rhj7-vh3v-mcq6"
},
{
"name": "https://github.com/daptin/daptin/commit/2d70950979b51eb6c8b4234dd50558b608ad2ffe",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/daptin/daptin/commit/2d70950979b51eb6c8b4234dd50558b608ad2ffe"
}
],
"source": {
"advisory": "GHSA-rhj7-vh3v-mcq6",
"discovery": "UNKNOWN"
},
"title": "Daptin: ParseAcceptLanguage `_` separator bypass enables \u003e250x CPU amplification via Accept-Language header in LanguageMiddleware"
}
},
"cveMetadata": {
"assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"assignerShortName": "GitHub_M",
"cveId": "CVE-2026-62160",
"datePublished": "2026-10-30T18:26:29.248Z",
"dateReserved": "2026-07-13T14:16:29.572Z",
"dateUpdated": "2026-10-30T19:39:33.382Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-61902 (GCVE-0-2026-61902)
Vulnerability from cvelistv5 – Published: 2026-10-21 11:41 – Updated: 2026-10-30 14:10- CWE-400 - Uncontrolled Resource Consumption
| URL | Tags |
|---|---|
| https://lists.apache.org/thread/2pf15ojj0vr7rtx95… | vendor-advisory |
| Vendor | Product | Version | |
|---|---|---|---|
| Apache Software Foundation | Apache bRPC |
Affected:
0 , < 1.18.0
(semver)
|
{
"containers": {
"adp": [
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 7.5,
"baseSeverity": "HIGH",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-61902",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-30T14:10:37.719815Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-10-30T14:10:48.052Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://github.com",
"defaultStatus": "unaffected",
"packageName": "apache/brpc",
"packageURL": "pkg:github/apache/brpc",
"product": "Apache bRPC",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "1.18.0",
"status": "affected",
"version": "0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "BeaCox"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cdiv\u003e\u003cdiv\u003eApache bRPC versions before 1.18.0 do not consistently enforce the configured max_body_size limit in non-progressive HTTP/1 and HTTP/2 parsing and in memcache and couchbase response parsing.\u003c/div\u003e\u003cdiv\u003eA remote unauthenticated peer can cause an affected process to buffer message data beyond the configured limit, which may lead to memory exhaustion and denial of service. \u003cbr\u003eUsers should upgrade to 1.18.0 or apply the patch from PR \u003ca target=\"_blank\" rel=\"nofollow\" href=\"https://github.com/apache/brpc/pull/3382\"\u003ehttps://github.com/apache/brpc/pull/3382\u003c/a\u003e. The fix rejects oversized buffered HTTP bodies, returns HTTP 413 for HTTP/1 requests, resets oversized HTTP/2 streams, and rejects oversized memcache and couchbase responses from their declared lengths. Progressive HTTP reading remains supported because it uses bounded buffering.\u003c/div\u003e\u003c/div\u003e"
}
],
"value": "Apache bRPC versions before 1.18.0 do not consistently enforce the configured max_body_size limit in non-progressive HTTP/1 and HTTP/2 parsing and in memcache and couchbase response parsing.\n\nA remote unauthenticated peer can cause an affected process to buffer message data beyond the configured limit, which may lead to memory exhaustion and denial of service. \nUsers should upgrade to 1.18.0 or apply the patch from PR https://github.com/apache/brpc/pull/3382 . The fix rejects oversized buffered HTTP bodies, returns HTTP 413 for HTTP/1 requests, resets oversized HTTP/2 streams, and rejects oversized memcache and couchbase responses from their declared lengths. Progressive HTTP reading remains supported because it uses bounded buffering."
}
],
"metrics": [
{
"other": {
"content": {
"text": "medium"
},
"type": "Textual description of severity"
},
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400 Uncontrolled Resource Consumption",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-21T11:41:56.277Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://lists.apache.org/thread/2pf15ojj0vr7rtx95677kgtl1mx3gdgb"
}
],
"source": {
"discovery": "EXTERNAL"
},
"title": "Apache bRPC: Memory Exhaustion Through Inconsistent Message Body Limits",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-61902",
"datePublished": "2026-10-21T11:41:56.277Z",
"dateReserved": "2026-07-12T12:38:09.500Z",
"dateUpdated": "2026-10-30T14:10:48.052Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-61854 (GCVE-0-2026-61854)
Vulnerability from cvelistv5 – Published: 2026-10-30 18:25 – Updated: 2026-11-09 16:33| URL | Tags |
|---|---|
| https://github.com/jackh54/VoiceSentinel/security… | x_refsource_CONFIRM |
| https://github.com/jackh54/VoiceSentinel/commit/a… | x_refsource_MISC |
| https://github.com/jackh54/VoiceSentinel/releases… | x_refsource_MISC |
| Vendor | Product | Version | |
|---|---|---|---|
| jackh54 | VoiceSentinel |
Affected:
>= 2.2.1, < 3.3.1
|
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-61854",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-06T16:33:22.487970Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-09T16:33:24.747Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "VoiceSentinel",
"vendor": "jackh54",
"versions": [
{
"status": "affected",
"version": "\u003e= 2.2.1, \u003c 3.3.1"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "VoiceSentinel is a real-time voice moderation system for Minecraft servers. From 2.2.1 until 3.3.1, the optional report buffer feature has a race between retention cleanup and normal transcript writes. In `report_buffer.py`, `_maybe_cleanup()` uses an unlocked dictionary for once-per-hour cleanup throttling, allowing simultaneous `_cleanup_tenant()` operations for one tenant. Cleanup reads `transcripts.jsonl` and rewrites it in place without file locking or atomic replacement, while `report_buffer_append_async` uses `asyncio.to_thread` to append without synchronization. In `main.py`, concurrent `_processing_worker` tasks make this reachable in normal operation; `processing.worker_count` of two or more and public-pool servers sharing a `server_key` increase collisions. With `report_buffer.enabled` set to true, racing writes can lose, duplicate or corrupt transcript data and defeat `report_buffer.retention_seconds` pruning, allowing unbounded disk growth that can exhaust storage and crash the host or other services sharing it. The feature is opt-in and disabled by default. This issue is fixed in version 3.3.1."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 8.2,
"baseSeverity": "HIGH",
"confidentialityImpact": "NONE",
"integrityImpact": "LOW",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H",
"version": "3.1"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-362",
"description": "CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400: Uncontrolled Resource Consumption",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-667",
"description": "CWE-667: Improper Locking",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-30T18:25:28.484Z",
"orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"shortName": "GitHub_M"
},
"references": [
{
"name": "https://github.com/jackh54/VoiceSentinel/security/advisories/GHSA-vhqx-3242-77j7",
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://github.com/jackh54/VoiceSentinel/security/advisories/GHSA-vhqx-3242-77j7"
},
{
"name": "https://github.com/jackh54/VoiceSentinel/commit/a8c9f926d19969a19d05eee2a508719aea7f109c",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/jackh54/VoiceSentinel/commit/a8c9f926d19969a19d05eee2a508719aea7f109c"
},
{
"name": "https://github.com/jackh54/VoiceSentinel/releases/tag/v3.3.1",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/jackh54/VoiceSentinel/releases/tag/v3.3.1"
}
],
"source": {
"advisory": "GHSA-vhqx-3242-77j7",
"discovery": "UNKNOWN"
},
"title": "VoiceSentinel: Race condition in report buffer cleanup can corrupt transcript data and cause unbounded disk growth"
}
},
"cveMetadata": {
"assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"assignerShortName": "GitHub_M",
"cveId": "CVE-2026-61854",
"datePublished": "2026-10-30T18:25:28.484Z",
"dateReserved": "2026-07-10T20:28:17.513Z",
"dateUpdated": "2026-11-09T16:33:24.747Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-61848 (GCVE-0-2026-61848)
Vulnerability from cvelistv5 – Published: 2026-10-30 18:45 – Updated: 2026-11-06 17:31- CWE-400 - Uncontrolled Resource Consumption
| URL | Tags |
|---|---|
| https://github.com/rgrove/crass/security/advisori… | x_refsource_CONFIRM |
| https://github.com/rgrove/crass/releases/tag/v1.0.7 | x_refsource_MISC |
| http://github.com/rgrove/crass/commit/da29664648b… | x_refsource_MISC |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-61848",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-06T17:28:10.376514Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-06T17:31:01.082Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "crass",
"vendor": "rgrove",
"versions": [
{
"status": "affected",
"version": "\u003c 1.0.7"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "Crass is a Ruby CSS parser that\u0027s fully compliant with the CSS Syntax Level 3 specification. Prior to 1.0.7, when Crass parses input containing `non-ASCII characters`, inefficiencies in tracking the positions of `multi-byte characters` result in superlinear parsing time. An attacker-controlled CSS input consisting of many `non-ASCII characters` can therefore cause excessive CPU consumption and potentially denial of service. This issue is fixed in version 1.0.7."
}
],
"metrics": [
{
"cvssV4_0": {
"attackComplexity": "LOW",
"attackRequirements": "PRESENT",
"attackVector": "NETWORK",
"baseScore": 6.3,
"baseSeverity": "MEDIUM",
"privilegesRequired": "NONE",
"subAvailabilityImpact": "LOW",
"subConfidentialityImpact": "NONE",
"subIntegrityImpact": "NONE",
"userInteraction": "NONE",
"vectorString": "CVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:N/VC:N/VI:N/VA:L/SC:N/SI:N/SA:L",
"version": "4.0",
"vulnAvailabilityImpact": "LOW",
"vulnConfidentialityImpact": "NONE",
"vulnIntegrityImpact": "NONE"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400: Uncontrolled Resource Consumption",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-30T18:45:20.036Z",
"orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"shortName": "GitHub_M"
},
"references": [
{
"name": "https://github.com/rgrove/crass/security/advisories/GHSA-8vfg-2r28-hvhj",
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://github.com/rgrove/crass/security/advisories/GHSA-8vfg-2r28-hvhj"
},
{
"name": "https://github.com/rgrove/crass/releases/tag/v1.0.7",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/rgrove/crass/releases/tag/v1.0.7"
},
{
"name": "http://github.com/rgrove/crass/commit/da29664648bf80a97a6439e030a4814291c9afa5",
"tags": [
"x_refsource_MISC"
],
"url": "http://github.com/rgrove/crass/commit/da29664648bf80a97a6439e030a4814291c9afa5"
}
],
"source": {
"advisory": "GHSA-8vfg-2r28-hvhj",
"discovery": "UNKNOWN"
},
"title": "Crass: Non-ASCII characters cause superlinear CPU consumption"
}
},
"cveMetadata": {
"assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"assignerShortName": "GitHub_M",
"cveId": "CVE-2026-61848",
"datePublished": "2026-10-30T18:45:20.036Z",
"dateReserved": "2026-07-10T20:28:17.513Z",
"dateUpdated": "2026-11-06T17:31:01.082Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-61816 (GCVE-0-2026-61816)
Vulnerability from cvelistv5 – Published: 2026-09-24 17:55 – Updated: 2026-09-24 18:11- CWE-400 - Uncontrolled Resource Consumption
| URL | Tags |
|---|---|
| https://github.com/zbateson/mail-mime-parser/secu… | x_refsource_CONFIRM |
| Vendor | Product | Version | |
|---|---|---|---|
| zbateson | mail-mime-parser |
Affected:
>= 2.0.0, < 3.0.6
Affected: >= 4.0.0, < 4.0.2 |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-61816",
"options": [
{
"Exploitation": "poc"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-09-24T18:11:24.169203Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-09-24T18:11:49.772Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"references": [
{
"tags": [
"exploit"
],
"url": "https://github.com/zbateson/mail-mime-parser/security/advisories/GHSA-f6v3-2qmr-vfjx"
}
],
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "mail-mime-parser",
"vendor": "zbateson",
"versions": [
{
"status": "affected",
"version": "\u003e= 2.0.0, \u003c 3.0.6"
},
{
"status": "affected",
"version": "\u003e= 4.0.0, \u003c 4.0.2"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "zbateson/mail-mime-parser is a mail mime parser alternative to PHP\u0027s imap* functions and Pear libraries for reading messages in Internet Message Format RFC 822. Starting in version 2.0.0 and prior to version 3.0.6 and 4.0.2, an uncontrolled resource consumption / algorithmic complexity vulnerability (CWE-400) affects any application that parses untrusted email with this library. Three independent parsing paths are super-linear in cost, so a byte-size cap on the caller side does **not** bound the work done. A crafted message under 2 MB can consume seconds of CPU or hundreds of megabytes to multiple gigabytes of memory (leading to an out-of-memory kill), enabling denial of service. The parse is lazy, but the cost is paid on the first `getAllParts()` or content read. This is fxed in 4.0.2 and 3.0.6. The fixes add configurable limits on multipart nesting depth and on header count / total header size (recording a parse error past the threshold rather than throwing), and change sibling append to O(n). Users should upgrade to one of these (or later) versions. Versions 2.x are also affected but are end-of-life and will not receive patches; users on those lines should upgrade to a fixed release. (Versions prior to 2.0 used a different parser and are not affected by all three paths.) These costs are super-linear, so an input byte-size cap alone does not bound them. Until upgrading, restrict exposure of the parser to untrusted input, and run parsing under a constrained memory_limit and execution time limit so a malicious message fails its own request rather than exhausting the host."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 7.5,
"baseSeverity": "HIGH",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400: Uncontrolled Resource Consumption",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-09-24T17:55:11.439Z",
"orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"shortName": "GitHub_M"
},
"references": [
{
"name": "https://github.com/zbateson/mail-mime-parser/security/advisories/GHSA-f6v3-2qmr-vfjx",
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://github.com/zbateson/mail-mime-parser/security/advisories/GHSA-f6v3-2qmr-vfjx"
}
],
"source": {
"advisory": "GHSA-f6v3-2qmr-vfjx",
"discovery": "UNKNOWN"
},
"title": "zbateson/mail-mime-parser has uncontrolled resource consumption (CPU/memory DoS) parsing untrusted MIME"
}
},
"cveMetadata": {
"assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"assignerShortName": "GitHub_M",
"cveId": "CVE-2026-61816",
"datePublished": "2026-09-24T17:55:11.439Z",
"dateReserved": "2026-07-10T20:17:57.992Z",
"dateUpdated": "2026-09-24T18:11:49.772Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-61814 (GCVE-0-2026-61814)
Vulnerability from cvelistv5 – Published: 2026-09-23 18:39 – Updated: 2026-09-23 19:41| URL | Tags |
|---|---|
| https://github.com/typelevel/jawn/security/adviso… | x_refsource_CONFIRM |
| https://github.com/typelevel/jawn/commit/cddcd5e3… | x_refsource_MISC |
| https://github.com/typelevel/jawn/releases/tag/v1.7.0 | x_refsource_MISC |
| Vendor | Product | Version | |
|---|---|---|---|
| typelevel | jawn |
Affected:
< 1.7.0
|
|
| org.typelevel | jawn-parser_2.12 |
Affected:
< 1.7.0
|
|
| org.typelevel | jawn-parser_2.13 |
Affected:
< 1.7.0
|
|
| org.typelevel | jawn-parser_3 |
Affected:
< 1.7.0
|
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-61814",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-09-23T19:25:56.569425Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-09-23T19:41:40.864Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "jawn",
"vendor": "typelevel",
"versions": [
{
"status": "affected",
"version": "\u003c 1.7.0"
}
]
},
{
"product": "jawn-parser_2.12",
"vendor": "org.typelevel",
"versions": [
{
"status": "affected",
"version": "\u003c 1.7.0"
}
]
},
{
"product": "jawn-parser_2.13",
"vendor": "org.typelevel",
"versions": [
{
"status": "affected",
"version": "\u003c 1.7.0"
}
]
},
{
"product": "jawn-parser_3",
"vendor": "org.typelevel",
"versions": [
{
"status": "affected",
"version": "\u003c 1.7.0"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "Jawn is an open source JSON parser. Prior to 1.7.0, Jawn\u0027s AsyncParser can perform quadratic work when a single JSON token is delivered across many small chunks because each absorb call rescans the incomplete token from the start. A remote attacker who controls untrusted JSON input and its chunk sizes can exhaust CPU resources and cause denial of service in applications using AsyncParser. This issue is fixed in version 1.7.0."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 7.5,
"baseSeverity": "HIGH",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400: Uncontrolled Resource Consumption",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-407",
"description": "CWE-407: Inefficient Algorithmic Complexity",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-09-23T18:39:01.067Z",
"orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"shortName": "GitHub_M"
},
"references": [
{
"name": "https://github.com/typelevel/jawn/security/advisories/GHSA-w4cm-gvhj-cgw6",
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://github.com/typelevel/jawn/security/advisories/GHSA-w4cm-gvhj-cgw6"
},
{
"name": "https://github.com/typelevel/jawn/commit/cddcd5e3387c356b05953f7b2af103d309687e4b",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/typelevel/jawn/commit/cddcd5e3387c356b05953f7b2af103d309687e4b"
},
{
"name": "https://github.com/typelevel/jawn/releases/tag/v1.7.0",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/typelevel/jawn/releases/tag/v1.7.0"
}
],
"source": {
"advisory": "GHSA-w4cm-gvhj-cgw6",
"discovery": "UNKNOWN"
},
"title": "Jawn: Quadratic parsing effort in AsyncParser"
}
},
"cveMetadata": {
"assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"assignerShortName": "GitHub_M",
"cveId": "CVE-2026-61814",
"datePublished": "2026-09-23T18:39:01.067Z",
"dateReserved": "2026-07-10T20:17:57.991Z",
"dateUpdated": "2026-09-23T19:41:40.864Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-61801 (GCVE-0-2026-61801)
Vulnerability from cvelistv5 – Published: 2026-10-08 16:22 – Updated: 2026-10-08 17:27- CWE-400 - Uncontrolled Resource Consumption
| URL | Tags |
|---|---|
| https://github.com/moby/sys/security/advisories/G… | x_refsource_CONFIRM |
| https://github.com/moby/sys/pull/221 | x_refsource_MISC |
| https://github.com/moby/sys/commit/85a71bbe1faa36… | x_refsource_MISC |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-61801",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-08T17:27:31.522788Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-10-08T17:27:37.645Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "sys",
"vendor": "moby",
"versions": [
{
"status": "affected",
"version": "\u003c 0.4.1"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "The `github.com/moby/sys/user` package provides Go utilities for parsing and looking up entries in Unix-style user and group database files. Versions before 0.4.1 do not sufficiently limit entries when parsing `/etc/passwd`- or `/etc/group`-style files, allowing an attacker who can supply a specially crafted file to cause excessive memory consumption and potentially terminate the affected process due to an out-of-memory condition. This issue is patched in version 0.4.1. As a workaround, avoid parsing attacker-controlled user or group database files, or validate and limit untrusted input before parsing it."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 5.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400: Uncontrolled Resource Consumption",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-08T16:22:25.558Z",
"orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"shortName": "GitHub_M"
},
"references": [
{
"name": "https://github.com/moby/sys/security/advisories/GHSA-mjcv-p78q-w5fw",
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://github.com/moby/sys/security/advisories/GHSA-mjcv-p78q-w5fw"
},
{
"name": "https://github.com/moby/sys/pull/221",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/moby/sys/pull/221"
},
{
"name": "https://github.com/moby/sys/commit/85a71bbe1faa36c552a960e6a5f3d0cfb632fbbe",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/moby/sys/commit/85a71bbe1faa36c552a960e6a5f3d0cfb632fbbe"
}
],
"source": {
"advisory": "GHSA-mjcv-p78q-w5fw",
"discovery": "UNKNOWN"
},
"title": "github.com/moby/sys/user has a possible DoS via unbounded parsing of user and group database files"
}
},
"cveMetadata": {
"assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"assignerShortName": "GitHub_M",
"cveId": "CVE-2026-61801",
"datePublished": "2026-10-08T16:22:25.558Z",
"dateReserved": "2026-07-10T20:06:05.617Z",
"dateUpdated": "2026-10-08T17:27:37.645Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-61617 (GCVE-0-2026-61617)
Vulnerability from cvelistv5 – Published: 2026-08-26 21:56 – Updated: 2026-08-27 16:05| URL | Tags |
|---|---|
| https://github.com/pterodactyl/wings/security/adv… | x_refsource_CONFIRM |
| https://github.com/pterodactyl/wings/commit/da1a2… | x_refsource_MISC |
| Vendor | Product | Version | |
|---|---|---|---|
| pterodactyl | wings |
Affected:
< 1.13.3
|
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-61617",
"options": [
{
"Exploitation": "poc"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-08-27T16:05:12.017061Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-08-27T16:05:48.675Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"references": [
{
"tags": [
"exploit"
],
"url": "https://github.com/pterodactyl/wings/security/advisories/GHSA-8j54-xcwx-597p"
}
],
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "wings",
"vendor": "pterodactyl",
"versions": [
{
"status": "affected",
"version": "\u003c 1.13.3"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "Wings is the server control plane for the Pterodactyl game-server management panel. In versions up to and including 1.13.2, the SFTP write path does not enforce a server\u0027s disk quota during a transfer, allowing a tenant with SFTP write access to a single server to exhaust the host node\u0027s physical disk and take down every server on it. Wings checks available space only once, as a boolean, when the write handle is opened, using a stale cached usage value and without knowing the size of the incoming data, and it then returns a raw, unaccounted file handle that is never re-checked as the transfer proceeds. A single upload can therefore be written without bound, far beyond the configured disk limit, until the node\u0027s disk is full, and because a server stopped for exceeding its limit is not treated as suspended, SFTP writes are still accepted even after the quota is already exceeded. This issue is fixed in version 1.13.3."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 7.7,
"baseSeverity": "HIGH",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "CHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H",
"version": "3.1"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-770",
"description": "CWE-770: Allocation of Resources Without Limits or Throttling",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400: Uncontrolled Resource Consumption",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-26T21:56:41.379Z",
"orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"shortName": "GitHub_M"
},
"references": [
{
"name": "https://github.com/pterodactyl/wings/security/advisories/GHSA-8j54-xcwx-597p",
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://github.com/pterodactyl/wings/security/advisories/GHSA-8j54-xcwx-597p"
},
{
"name": "https://github.com/pterodactyl/wings/commit/da1a216cfff5867fa66be32cb1edb93e37fd71ff",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/pterodactyl/wings/commit/da1a216cfff5867fa66be32cb1edb93e37fd71ff"
}
],
"source": {
"advisory": "GHSA-8j54-xcwx-597p",
"discovery": "UNKNOWN"
},
"title": "Pterodactyl Wings SFTP write path does not enforce disk quota, allowing node-wide disk exhaustion"
}
},
"cveMetadata": {
"assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"assignerShortName": "GitHub_M",
"cveId": "CVE-2026-61617",
"datePublished": "2026-08-26T21:56:41.379Z",
"dateReserved": "2026-07-10T17:36:04.598Z",
"dateUpdated": "2026-08-27T16:05:48.675Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
Mitigation
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended. A strong authentication and access control model will help prevent such attacks from occurring in the first place. The login application should be protected against DoS attacks as much as possible. Limiting the database access, perhaps by caching result sets, can help minimize the resources expended. To further limit the potential for a DoS attack, consider tracking the rate of requests received from users and blocking requests that exceed a defined rate threshold.
Mitigation
- Mitigation of resource exhaustion attacks requires that the target system either:
- recognizes the attack and denies that user further access for a given amount of time, or
- uniformly throttles all requests in order to make it more difficult to consume resources more quickly than they can again be freed.
- The first of these solutions is an issue in itself though, since it may allow attackers to prevent the use of the system by a particular valid user. If the attacker impersonates the valid user, they may be able to prevent the user from accessing the server in question.
- The second solution is simply difficult to effectively institute -- and even when properly done, it does not provide a full solution. It simply makes the attack require more resources on the part of the attacker.
Mitigation
Ensure that protocols have specific limits of scale placed on them.
Mitigation
Ensure that all failures in resource allocation place the system into a safe posture.
CAPEC-147: XML Ping of the Death
An attacker initiates a resource depletion attack where a large number of small XML messages are delivered at a sufficiently rapid rate to cause a denial of service or crash of the target. Transactions such as repetitive SOAP transactions can deplete resources faster than a simple flooding attack because of the additional resources used by the SOAP protocol and the resources necessary to process SOAP messages. The transactions used are immaterial as long as they cause resource utilization on the target. In other words, this is a normal flooding attack augmented by using messages that will require extra processing on the target.
CAPEC-227: Sustained Client Engagement
An adversary attempts to deny legitimate users access to a resource by continually engaging a specific resource in an attempt to keep the resource tied up as long as possible. The adversary's primary goal is not to crash or flood the target, which would alert defenders; rather it is to repeatedly perform actions or abuse algorithmic flaws such that a given resource is tied up and not available to a legitimate user. By carefully crafting a requests that keep the resource engaged through what is seemingly benign requests, legitimate users are limited or completely denied access to the resource.
CAPEC-492: Regular Expression Exponential Blowup
An adversary may execute an attack on a program that uses a poor Regular Expression(Regex) implementation by choosing input that results in an extreme situation for the Regex. A typical extreme situation operates at exponential time compared to the input size. This is due to most implementations using a Nondeterministic Finite Automaton(NFA) state machine to be built by the Regex algorithm since NFA allows backtracking and thus more complex regular expressions.