Common Weakness Enumeration

CWE-400

Weakness Discouraged

Uncontrolled Resource Consumption

Abstraction: Class · Status: Draft

The product does not properly control the allocation and maintenance of a limited resource.

Dimensions

  • Behavior-Property: Uncontrolled
  • Behavior-Type: Consumption
  • Resource-Type: Resource
Mapping guidance

CWE-400 is intended for incorrect behaviors in which the product is expected to track and restrict how many resources it consumes, but CWE-400 is often misused because it is conflated with the "technical impact" of vulnerabilities in which resource consumption occurs. It is sometimes used for low-information vulnerability reports. It is a level-1 Class (i.e., a child of a Pillar).

Closely analyze the specific mistake that is causing resource consumption, and perform a CWE mapping for that mistake. Consider children/descendants.

Relationships and members
ChildOf: CWE-664 · View CWE-1000
Modes of introduction
Operation

The product could be operated in a system or environment with lower resource limits than expected, which might make it easier for attackers to consume all available resources.

System Configuration

The product could be configured with lower resource limits than expected, which might make it easier for attackers to consume all available resources.

Architecture and Design

The designer might not consider how to handle and throttle excessive resource requests, which typically requires careful planning to handle more gracefully than a crash or exit.

Implementation

There are at least three distinct scenarios that can commonly lead to resource exhaustion:

Lack of throttling for the number of allocated resources.

Losing all references to a resource before reaching the shutdown stage.

Not closing/returning a resource after processing.

Resource exhaustion problems often occur due to an incorrect implementation of the following situations:

Error conditions and other exceptional circumstances.

Confusion over which part of the program is responsible for releasing the resource.

Detection methods

Automated Static Analysis

Automated static analysis typically has limited utility in recognizing resource exhaustion problems, except for program-independent system resources such as files, sockets, and processes. For system resources, automated static analysis may be able to detect circumstances in which resources are not released after they have expired. Automated analysis of configuration files may be able to detect settings that do not specify a maximum value.

Automated static analysis tools will not be appropriate for detecting exhaustion of custom resources, such as an intended security policy in which a bulletin board user is only allowed to make a limited number of posts per day.

Effectiveness: Limited

Automated Dynamic Analysis

Certain automated dynamic analysis techniques may be effective in spotting resource exhaustion problems, especially with resources such as processes, memory, and connections. The technique may involve generating a large number of requests to the product within a short time frame.

Effectiveness: Moderate

Fuzzing

While fuzzing is typically geared toward finding low-level implementation bugs, it can inadvertently find resource exhaustion problems. This can occur when the fuzzer generates a large number of test cases but does not restart the targeted product in between test cases. If an individual test case produces a crash, but it does not do so reliably, then an inability to handle resource exhaustion may be the cause.

Effectiveness: Opportunistic

Notes

Theoretical

Vulnerability theory is largely about how behaviors and resources interact. "Resource exhaustion" can be regarded as either a consequence or an attack, depending on the perspective. This entry is an attempt to reflect the underlying weaknesses that enable these attacks (or consequences) to take place.

Other

Database queries that take a long time to process are good DoS targets. An attacker would have to write a few lines of code to generate enough traffic to exceed the site's ability to keep up. This would effectively prevent authorized users from using the site at all. Resources can be exploited simply by ensuring that the target machine must do much more work and consume more resources in order to service a request than the attacker must do to initiate a request.

A prime example of this can be found in old switches that were vulnerable to "macof" attacks (so named for a tool developed by Dugsong). These attacks flooded a switch with random IP and MAC address combinations, therefore exhausting the switch's cache, which held the information of which port corresponded to which MAC addresses. Once this cache was exhausted, the switch would fail in an insecure way and would begin to act simply as a hub, broadcasting all traffic on all ports and allowing for basic sniffing attacks.

Limited resources include memory, file system storage, database connection pool entries, CPU, and others.

Content history
Submission: CLASP · 2006-07-19 · CWE Draft 3
Contribution: "Mapping CWE to 62443" Sub-Working Group · CWE-CAPEC ICS/OT SIG · 2023-01-24 · CWE 4.10

Suggested mappings to ISA/IEC 62443.

Contribution: "Mapping CWE to 62443" Sub-Working Group · CWE-CAPEC ICS/OT SIG · 2023-04-25 · CWE 4.11

Suggested mappings to ISA/IEC 62443.

Contribution: Abhi Balakrishnan · 2025-02-25 · CWE 4.17

Provided diagram to improve CWE usability.

Modification: Eric Dalci · Cigital · 2008-07-01 · CWE 1.0

updated Time_of_Introduction

Modification: · Veracode · 2008-08-15 · CWE 1.0

Suggested OWASP Top Ten 2004 mapping

Modification: CWE Content Team · MITRE · 2008-09-08 · CWE 1.0

updated Common_Consequences, Relationships, Other_Notes, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2008-10-14 · CWE 1.0.1

updated Description, Name, Relationships

Modification: CWE Content Team · MITRE · 2009-01-12 · CWE 1.2

updated Description

Modification: CWE Content Team · MITRE · 2009-05-27 · CWE 1.4

updated Name, Relationships

Modification: CWE Content Team · MITRE · 2009-07-27 · CWE 1.5

updated Description, Relationships

Modification: CWE Content Team · MITRE · 2009-10-29 · CWE 1.6

updated Relationships

Modification: CWE Content Team · MITRE · 2009-12-28 · CWE 1.7

updated Common_Consequences, Demonstrative_Examples, Detection_Factors, Likelihood_of_Exploit, Observed_Examples, Other_Notes, Potential_Mitigations, References

Modification: CWE Content Team · MITRE · 2010-02-16 · CWE 1.8

updated Detection_Factors, Potential_Mitigations, References, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2010-04-05 · CWE 1.8.1

updated Related_Attack_Patterns

Modification: CWE Content Team · MITRE · 2010-06-21 · CWE 1.9

updated Description

Modification: CWE Content Team · MITRE · 2010-09-27 · CWE 1.10

updated Demonstrative_Examples

Modification: CWE Content Team · MITRE · 2011-06-01 · CWE 1.13

updated Common_Consequences, Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2012-05-11 · CWE 2.2

updated Demonstrative_Examples, Related_Attack_Patterns, Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2013-07-17 · CWE 2.5

updated Relationships

Modification: CWE Content Team · MITRE · 2014-07-30 · CWE 2.8

updated Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2015-12-07 · CWE 2.9

updated Related_Attack_Patterns, Relationships

Modification: CWE Content Team · MITRE · 2017-01-19 · CWE 2.10

updated Relationships

Modification: CWE Content Team · MITRE · 2017-11-08 · CWE 3.0

updated Applicable_Platforms, Demonstrative_Examples, Likelihood_of_Exploit, Potential_Mitigations, References, Relationships

Modification: CWE Content Team · MITRE · 2018-03-27 · CWE 3.1

updated References, Type

Modification: CWE Content Team · MITRE · 2019-01-03 · CWE 3.2

updated Alternate_Terms, Description, Name, Relationships, Taxonomy_Mappings, Theoretical_Notes

Modification: CWE Content Team · MITRE · 2019-06-20 · CWE 3.3

updated Related_Attack_Patterns, Relationships

Modification: CWE Content Team · MITRE · 2019-09-19 · CWE 3.4

updated Description, Relationships

Modification: CWE Content Team · MITRE · 2020-02-24 · CWE 4.0

updated Description, References, Related_Attack_Patterns, Relationships

Modification: CWE Content Team · MITRE · 2020-06-25 · CWE 4.1

updated Description, Maintenance_Notes

Modification: CWE Content Team · MITRE · 2020-08-20 · CWE 4.2

updated Relationships

Modification: CWE Content Team · MITRE · 2022-04-28 · CWE 4.7

updated Related_Attack_Patterns

Modification: CWE Content Team · MITRE · 2022-06-28 · CWE 4.8

updated Observed_Examples, Relationships

Modification: CWE Content Team · MITRE · 2022-10-13 · CWE 4.9

updated Observed_Examples, Relationships

Modification: CWE Content Team · MITRE · 2023-01-31 · CWE 4.10

updated Common_Consequences, Description, Detection_Factors, Maintenance_Notes, Related_Attack_Patterns, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2023-04-27 · CWE 4.11

updated Demonstrative_Examples, Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2023-06-29 · CWE 4.12

updated Mapping_Notes, Relationships

Modification: CWE Content Team · MITRE · 2024-11-19 · CWE 4.16

updated Relationships

Modification: CWE Content Team · MITRE · 2025-04-03 · CWE 4.17

updated Common_Consequences, Description, Diagram, Modes_of_Introduction, Other_Notes, Time_of_Introduction

Modification: CWE Content Team · MITRE · 2025-09-09 · CWE 4.18

updated Observed_Examples, References

Modification: CWE Content Team · MITRE · 2025-12-11 · CWE 4.19

updated Applicable_Platforms, Maintenance_Notes, Weakness_Ordinalities

Modification: CWE Content Team · MITRE · 2026-04-30 · CWE 4.20

updated Applicable_Platforms, Maintenance_Notes, Mapping_Notes, Other_Notes

Modification: CWE Content Team · MITRE · 2026-10-28 · CWE 5.0

updated Applicable_Platforms, Dimensions, References, Relationships, Taxonomy_Mappings

7207 vulnerabilities reference this CWE, most recent first.

CVE-2020-1722 (GCVE-0-2020-1722)

Vulnerability from cvelistv5 – Published: 2020-04-27 20:46 – Updated: 2024-08-04 06:46
VLAI
Summary
A flaw was found in all ipa versions 4.x.x through 4.8.0. When sending a very long password (>= 1,000,000 characters) to the server, the password hashing process could exhaust memory and CPU leading to a denial of service and the website becoming unresponsive. The highest threat from this vulnerability is to system availability.
CWE
Assigner
redhat CNA under the redhat root
CNA scorecard B 82/100 over 1233 records in the last 180 days details
References
Impacted products
Vendor Product Version
Red Hat ipa Affected: all ipa versions 4.x.x through 4.8.0
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2024-08-04T06:46:30.371Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "tags": [
              "x_refsource_CONFIRM",
              "x_transferred"
            ],
            "url": "https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2020-1722"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "product": "ipa",
          "vendor": "Red Hat",
          "versions": [
            {
              "status": "affected",
              "version": "all ipa versions 4.x.x through 4.8.0"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "A flaw was found in all ipa versions 4.x.x through 4.8.0. When sending a very long password (\u003e= 1,000,000 characters) to the server, the password hashing process could exhaust memory and CPU leading to a denial of service and the website becoming unresponsive. The highest threat from this vulnerability is to system availability."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2020-04-27T20:46:52.000Z",
        "orgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
        "shortName": "redhat"
      },
      "references": [
        {
          "tags": [
            "x_refsource_CONFIRM"
          ],
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2020-1722"
        }
      ]
    }
  },
  "cveMetadata": {
    "assignerOrgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
    "assignerShortName": "redhat",
    "cveId": "CVE-2020-1722",
    "datePublished": "2020-04-27T20:46:52.000Z",
    "dateReserved": "2019-11-27T00:00:00.000Z",
    "dateUpdated": "2024-08-04T06:46:30.371Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}

CVE-2020-1702 (GCVE-0-2020-1702)

Vulnerability from cvelistv5 – Published: 2021-05-27 19:45 – Updated: 2024-08-04 06:46
VLAI
Summary
A malicious container image can consume an unbounded amount of memory when being pulled to a container runtime host, such as Red Hat Enterprise Linux using podman, or OpenShift Container Platform. An attacker can use this flaw to trick a user, with privileges to pull container images, into crashing the process responsible for pulling the image. This flaw affects containers-image versions before 5.2.0.
Severity
No CVSS data available.
CWE
Assigner
redhat CNA under the redhat root
CNA scorecard B 82/100 over 1233 records in the last 180 days details
References
Impacted products
Vendor Product Version
n/a containers/image Affected: containers-image 5.2.0
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2024-08-04T06:46:30.897Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "tags": [
              "x_refsource_MISC",
              "x_transferred"
            ],
            "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1792796"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "product": "containers/image",
          "vendor": "n/a",
          "versions": [
            {
              "status": "affected",
              "version": "containers-image 5.2.0"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "A malicious container image can consume an unbounded amount of memory when being pulled to a container runtime host, such as Red Hat Enterprise Linux using podman, or OpenShift Container Platform. An attacker can use this flaw to trick a user, with privileges to pull container images, into crashing the process responsible for pulling the image. This flaw affects containers-image versions before 5.2.0."
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2021-05-27T19:45:08.000Z",
        "orgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
        "shortName": "redhat"
      },
      "references": [
        {
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1792796"
        }
      ],
      "x_legacyV4Record": {
        "CVE_data_meta": {
          "ASSIGNER": "secalert@redhat.com",
          "ID": "CVE-2020-1702",
          "STATE": "PUBLIC"
        },
        "affects": {
          "vendor": {
            "vendor_data": [
              {
                "product": {
                  "product_data": [
                    {
                      "product_name": "containers/image",
                      "version": {
                        "version_data": [
                          {
                            "version_value": "containers-image 5.2.0"
                          }
                        ]
                      }
                    }
                  ]
                },
                "vendor_name": "n/a"
              }
            ]
          }
        },
        "data_format": "MITRE",
        "data_type": "CVE",
        "data_version": "4.0",
        "description": {
          "description_data": [
            {
              "lang": "eng",
              "value": "A malicious container image can consume an unbounded amount of memory when being pulled to a container runtime host, such as Red Hat Enterprise Linux using podman, or OpenShift Container Platform. An attacker can use this flaw to trick a user, with privileges to pull container images, into crashing the process responsible for pulling the image. This flaw affects containers-image versions before 5.2.0."
            }
          ]
        },
        "problemtype": {
          "problemtype_data": [
            {
              "description": [
                {
                  "lang": "eng",
                  "value": "CWE-400"
                }
              ]
            }
          ]
        },
        "references": {
          "reference_data": [
            {
              "name": "https://bugzilla.redhat.com/show_bug.cgi?id=1792796",
              "refsource": "MISC",
              "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1792796"
            }
          ]
        }
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
    "assignerShortName": "redhat",
    "cveId": "CVE-2020-1702",
    "datePublished": "2021-05-27T19:45:08.000Z",
    "dateReserved": "2019-11-27T00:00:00.000Z",
    "dateUpdated": "2024-08-04T06:46:30.897Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}

CVE-2020-1700 (GCVE-0-2020-1700)

Vulnerability from cvelistv5 – Published: 2020-02-07 00:00 – Updated: 2024-08-04 06:46
VLAI
Summary
A flaw was found in the way the Ceph RGW Beast front-end handles unexpected disconnects. An authenticated attacker can abuse this flaw by making multiple disconnect attempts resulting in a permanent leak of a socket connection by radosgw. This flaw could lead to a denial of service condition by pile up of CLOSE_WAIT sockets, eventually leading to the exhaustion of available resources, preventing legitimate users from connecting to the system.
CWE
Assigner
redhat CNA under the redhat root
CNA scorecard B 82/100 over 1233 records in the last 180 days details
Impacted products
Vendor Product Version
[UNKNOWN] ceph Affected: 14.2.4-125.el8cp
Affected: 14.2.4-51.el7cp
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2024-08-04T06:46:30.305Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "tags": [
              "x_transferred"
            ],
            "url": "https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2020-1700"
          },
          {
            "name": "openSUSE-SU-2020:0187",
            "tags": [
              "vendor-advisory",
              "x_transferred"
            ],
            "url": "http://lists.opensuse.org/opensuse-security-announce/2020-02/msg00009.html"
          },
          {
            "name": "USN-4304-1",
            "tags": [
              "vendor-advisory",
              "x_transferred"
            ],
            "url": "https://usn.ubuntu.com/4304-1/"
          },
          {
            "name": "[debian-lts-announce] 20231023 [SECURITY] [DLA 3629-1] ceph security update",
            "tags": [
              "mailing-list",
              "x_transferred"
            ],
            "url": "https://lists.debian.org/debian-lts-announce/2023/10/msg00034.html"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "product": "ceph",
          "vendor": "[UNKNOWN]",
          "versions": [
            {
              "status": "affected",
              "version": "14.2.4-125.el8cp"
            },
            {
              "status": "affected",
              "version": "14.2.4-51.el7cp"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "A flaw was found in the way the Ceph RGW Beast front-end handles unexpected disconnects. An authenticated attacker can abuse this flaw by making multiple disconnect attempts resulting in a permanent leak of a socket connection by radosgw. This flaw could lead to a denial of service condition by pile up of CLOSE_WAIT sockets, eventually leading to the exhaustion of available resources, preventing legitimate users from connecting to the system."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2023-10-23T18:06:21.214Z",
        "orgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
        "shortName": "redhat"
      },
      "references": [
        {
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2020-1700"
        },
        {
          "name": "openSUSE-SU-2020:0187",
          "tags": [
            "vendor-advisory"
          ],
          "url": "http://lists.opensuse.org/opensuse-security-announce/2020-02/msg00009.html"
        },
        {
          "name": "USN-4304-1",
          "tags": [
            "vendor-advisory"
          ],
          "url": "https://usn.ubuntu.com/4304-1/"
        },
        {
          "name": "[debian-lts-announce] 20231023 [SECURITY] [DLA 3629-1] ceph security update",
          "tags": [
            "mailing-list"
          ],
          "url": "https://lists.debian.org/debian-lts-announce/2023/10/msg00034.html"
        }
      ]
    }
  },
  "cveMetadata": {
    "assignerOrgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
    "assignerShortName": "redhat",
    "cveId": "CVE-2020-1700",
    "datePublished": "2020-02-07T00:00:00.000Z",
    "dateReserved": "2019-11-27T00:00:00.000Z",
    "dateUpdated": "2024-08-04T06:46:30.305Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}

CVE-2020-1689 (GCVE-0-2020-1689)

Vulnerability from cvelistv5 – Published: 2020-10-16 20:31 – Updated: 2024-09-17 01:31
VLAI
Title
Junos OS: EX4300-MP/EX4600/QFX5K Series: High CPU load due to receipt of specific layer 2 frames when deployed in a Virtual Chassis configuration
Summary
On Juniper Networks EX4300-MP Series, EX4600 Series and QFX5K Series deployed in a Virtual Chassis configuration, receipt of a stream of specific layer 2 frames can cause high CPU load, which could lead to traffic interruption. This issue does not occur when the device is deployed in Stand Alone configuration. The offending layer 2 frame packets can originate only from within the broadcast domain where the device is connected. This issue affects Juniper Networks Junos OS on EX4300-MP Series, EX4600 Series and QFX5K Series: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2.
CWE
  • CWE-400 - Uncontrolled Resource Consumption
Assigner
juniper CNA under the mitre root
CNA scorecard B 84/100 over 193 records in the last 180 days details
References
URL Tags
https://kb.juniper.net/JSA11086 x_refsource_CONFIRM
Impacted products
Vendor Product Version
Juniper Networks Junos OS Affected: 17.3 , < 17.3R3-S9 (custom)
Affected: 17.4 , < 17.4R2-S11, 17.4R3-S2, 17.4R3-S3 (custom)
Affected: 18.1 , < 18.1R3-S11 (custom)
Affected: 18.2 , < 18.2R3-S5 (custom)
Affected: 18.3 , < 18.3R2-S4, 18.3R3-S3 (custom)
Affected: 18.4 , < 18.4R2-S5, 18.4R3-S4 (custom)
Affected: 19.1 , < 19.1R3-S2 (custom)
Affected: 19.2 , < 19.2R1-S5, 19.2R3 (custom)
Affected: 19.3 , < 19.3R2-S4, 19.3R3 (custom)
Affected: 19.4 , < 19.4R1-S3, 19.4R2-S1, 19.4R3 (custom)
Affected: 20.1 , < 20.1R1-S3, 20.1R2 (custom)
Create a notification for this product.
Date Public
2020-10-14 00:00
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2024-08-04T06:46:30.917Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "tags": [
              "x_refsource_CONFIRM",
              "x_transferred"
            ],
            "url": "https://kb.juniper.net/JSA11086"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "platforms": [
            "EX4300-MP Series, EX4600Series, QFX5K Series"
          ],
          "product": "Junos OS",
          "vendor": "Juniper Networks",
          "versions": [
            {
              "lessThan": "17.3R3-S9",
              "status": "affected",
              "version": "17.3",
              "versionType": "custom"
            },
            {
              "lessThan": "17.4R2-S11, 17.4R3-S2, 17.4R3-S3",
              "status": "affected",
              "version": "17.4",
              "versionType": "custom"
            },
            {
              "lessThan": "18.1R3-S11",
              "status": "affected",
              "version": "18.1",
              "versionType": "custom"
            },
            {
              "lessThan": "18.2R3-S5",
              "status": "affected",
              "version": "18.2",
              "versionType": "custom"
            },
            {
              "lessThan": "18.3R2-S4, 18.3R3-S3",
              "status": "affected",
              "version": "18.3",
              "versionType": "custom"
            },
            {
              "lessThan": "18.4R2-S5, 18.4R3-S4",
              "status": "affected",
              "version": "18.4",
              "versionType": "custom"
            },
            {
              "lessThan": "19.1R3-S2",
              "status": "affected",
              "version": "19.1",
              "versionType": "custom"
            },
            {
              "lessThan": "19.2R1-S5, 19.2R3",
              "status": "affected",
              "version": "19.2",
              "versionType": "custom"
            },
            {
              "lessThan": "19.3R2-S4, 19.3R3",
              "status": "affected",
              "version": "19.3",
              "versionType": "custom"
            },
            {
              "lessThan": "19.4R1-S3, 19.4R2-S1, 19.4R3",
              "status": "affected",
              "version": "19.4",
              "versionType": "custom"
            },
            {
              "lessThan": "20.1R1-S3, 20.1R2",
              "status": "affected",
              "version": "20.1",
              "versionType": "custom"
            }
          ]
        }
      ],
      "configurations": [
        {
          "lang": "en",
          "value": "To check if virtual chassis is configured, the administrator can run the following command:\n  user@switch\u003e show virtual-chassis status\n  Virtual Chassis Mode: Enabled"
        }
      ],
      "datePublic": "2020-10-14T00:00:00.000Z",
      "descriptions": [
        {
          "lang": "en",
          "value": "On Juniper Networks EX4300-MP Series, EX4600 Series and QFX5K Series deployed in a Virtual Chassis configuration, receipt of a stream of specific layer 2 frames can cause high CPU load, which could lead to traffic interruption. This issue does not occur when the device is deployed in Stand Alone configuration. The offending layer 2 frame packets can originate only from within the broadcast domain where the device is connected. This issue affects Juniper Networks Junos OS on EX4300-MP Series, EX4600 Series and QFX5K Series: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2."
        }
      ],
      "exploits": [
        {
          "lang": "en",
          "value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400 Uncontrolled Resource Consumption",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2020-10-16T20:31:38.000Z",
        "orgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
        "shortName": "juniper"
      },
      "references": [
        {
          "tags": [
            "x_refsource_CONFIRM"
          ],
          "url": "https://kb.juniper.net/JSA11086"
        }
      ],
      "solutions": [
        {
          "lang": "en",
          "value": "The following software releases have been updated to resolve this specific issue: Junos OS 17.3R3-S9, 17.4R2-S11, 17.4R3-S2, 17.4R3-S3, 18.1R3-S11, 18.2R3-S5, 18.3R2-S4, 18.3R3-S3, 18.4R2-S5, 18.4R3-S4, 19.1R3-S2, 19.2R1-S5, 19.2R3, 19.3R2-S4, 19.3R3, 19.4R1-S3, 19.4R2-S1, 19.4R3, 20.1R1-S3, 20.1R2, 20.2R1, and all subsequent releases."
        }
      ],
      "source": {
        "advisory": "JSA11086",
        "defect": [
          "1495890"
        ],
        "discovery": "USER"
      },
      "title": "Junos OS: EX4300-MP/EX4600/QFX5K Series: High CPU load due to receipt of specific layer 2 frames when deployed in a Virtual Chassis configuration",
      "workarounds": [
        {
          "lang": "en",
          "value": "There are no viable workarounds for this issue."
        }
      ],
      "x_generator": {
        "engine": "Vulnogram 0.0.9"
      },
      "x_legacyV4Record": {
        "CVE_data_meta": {
          "ASSIGNER": "sirt@juniper.net",
          "DATE_PUBLIC": "2020-10-14T16:00:00.000Z",
          "ID": "CVE-2020-1689",
          "STATE": "PUBLIC",
          "TITLE": "Junos OS: EX4300-MP/EX4600/QFX5K Series: High CPU load due to receipt of specific layer 2 frames when deployed in a Virtual Chassis configuration"
        },
        "affects": {
          "vendor": {
            "vendor_data": [
              {
                "product": {
                  "product_data": [
                    {
                      "product_name": "Junos OS",
                      "version": {
                        "version_data": [
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "17.3",
                            "version_value": "17.3R3-S9"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "17.4",
                            "version_value": "17.4R2-S11, 17.4R3-S2, 17.4R3-S3"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "18.1",
                            "version_value": "18.1R3-S11"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "18.2",
                            "version_value": "18.2R3-S5"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "18.3",
                            "version_value": "18.3R2-S4, 18.3R3-S3"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "18.4",
                            "version_value": "18.4R2-S5, 18.4R3-S4"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "19.1",
                            "version_value": "19.1R3-S2"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "19.2",
                            "version_value": "19.2R1-S5, 19.2R3"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "19.3",
                            "version_value": "19.3R2-S4, 19.3R3"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "19.4",
                            "version_value": "19.4R1-S3, 19.4R2-S1, 19.4R3"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "20.1",
                            "version_value": "20.1R1-S3, 20.1R2"
                          }
                        ]
                      }
                    }
                  ]
                },
                "vendor_name": "Juniper Networks"
              }
            ]
          }
        },
        "configuration": [
          {
            "lang": "en",
            "value": "To check if virtual chassis is configured, the administrator can run the following command:\n  user@switch\u003e show virtual-chassis status\n  Virtual Chassis Mode: Enabled"
          }
        ],
        "data_format": "MITRE",
        "data_type": "CVE",
        "data_version": "4.0",
        "description": {
          "description_data": [
            {
              "lang": "eng",
              "value": "On Juniper Networks EX4300-MP Series, EX4600 Series and QFX5K Series deployed in a Virtual Chassis configuration, receipt of a stream of specific layer 2 frames can cause high CPU load, which could lead to traffic interruption. This issue does not occur when the device is deployed in Stand Alone configuration. The offending layer 2 frame packets can originate only from within the broadcast domain where the device is connected. This issue affects Juniper Networks Junos OS on EX4300-MP Series, EX4600 Series and QFX5K Series: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2."
            }
          ]
        },
        "exploit": [
          {
            "lang": "en",
            "value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
          }
        ],
        "generator": {
          "engine": "Vulnogram 0.0.9"
        },
        "impact": {
          "cvss": {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        },
        "problemtype": {
          "problemtype_data": [
            {
              "description": [
                {
                  "lang": "eng",
                  "value": "CWE-400 Uncontrolled Resource Consumption"
                }
              ]
            }
          ]
        },
        "references": {
          "reference_data": [
            {
              "name": "https://kb.juniper.net/JSA11086",
              "refsource": "CONFIRM",
              "url": "https://kb.juniper.net/JSA11086"
            }
          ]
        },
        "solution": [
          {
            "lang": "en",
            "value": "The following software releases have been updated to resolve this specific issue: Junos OS 17.3R3-S9, 17.4R2-S11, 17.4R3-S2, 17.4R3-S3, 18.1R3-S11, 18.2R3-S5, 18.3R2-S4, 18.3R3-S3, 18.4R2-S5, 18.4R3-S4, 19.1R3-S2, 19.2R1-S5, 19.2R3, 19.3R2-S4, 19.3R3, 19.4R1-S3, 19.4R2-S1, 19.4R3, 20.1R1-S3, 20.1R2, 20.2R1, and all subsequent releases."
          }
        ],
        "source": {
          "advisory": "JSA11086",
          "defect": [
            "1495890"
          ],
          "discovery": "USER"
        },
        "work_around": [
          {
            "lang": "en",
            "value": "There are no viable workarounds for this issue."
          }
        ]
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
    "assignerShortName": "juniper",
    "cveId": "CVE-2020-1689",
    "datePublished": "2020-10-16T20:31:38.564Z",
    "dateReserved": "2019-11-04T00:00:00.000Z",
    "dateUpdated": "2024-09-17T01:31:50.083Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}

CVE-2020-1687 (GCVE-0-2020-1687)

Vulnerability from cvelistv5 – Published: 2020-10-16 20:31 – Updated: 2024-09-16 19:21
VLAI
Title
Junos OS: EX4300-MP/EX4600/QFX5K Series: High CPU load due to receipt of specific layer 2 frames in EVPN-VXLAN deployment.
Summary
On Juniper Networks EX4300-MP Series, EX4600 Series and QFX5K Series deployed in (Ethernet VPN) EVPN-(Virtual Extensible LAN) VXLAN configuration, receipt of a stream of specific VXLAN encapsulated layer 2 frames can cause high CPU load, which could lead to network protocol operation issue and traffic interruption. This issue affects devices that are configured as a Layer 2 or Layer 3 gateway of an EVPN-VXLAN deployment. The offending layer 2 frames that cause the issue originate from a different access switch that get encapsulated within the same EVPN-VXLAN domain. This issue affects Juniper Networks Junos OS on EX4300-MP Series, EX4600 Series and QFX5K Series: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R2-S2, 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R2-S1, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2.
CWE
  • CWE-400 - Uncontrolled Resource Consumption
Assigner
juniper CNA under the mitre root
CNA scorecard B 84/100 over 193 records in the last 180 days details
References
URL Tags
https://kb.juniper.net/JSA11084 x_refsource_CONFIRM
Impacted products
Vendor Product Version
Juniper Networks Junos OS Affected: 17.3 , < 17.3R3-S9 (custom)
Affected: 17.4 , < 17.4R2-S11, 17.4R3-S2, 17.4R3-S3 (custom)
Affected: 18.1 , < 18.1R3-S11 (custom)
Affected: 18.2 , < 18.2R3-S5 (custom)
Affected: 18.3 , < 18.3R2-S4, 18.3R3-S3 (custom)
Affected: 18.4 , < 18.4R2-S5, 18.4R3-S4 (custom)
Affected: 19.1 , < 19.1R2-S2, 19.1R3-S2 (custom)
Affected: 19.2 , < 19.2R1-S5, 19.2R2-S1, 19.2R3 (custom)
Affected: 19.3 , < 19.3R2-S4, 19.3R3 (custom)
Affected: 19.4 , < 19.4R1-S3, 19.4R2-S1, 19.4R3 (custom)
Affected: 20.1 , < 20.1R1-S3, 20.1R2 (custom)
Create a notification for this product.
Date Public
2020-10-14 00:00
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2024-08-04T06:46:30.860Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "tags": [
              "x_refsource_CONFIRM",
              "x_transferred"
            ],
            "url": "https://kb.juniper.net/JSA11084"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "platforms": [
            "EX4300-MP Series, EX4600Series, QFX5K Series"
          ],
          "product": "Junos OS",
          "vendor": "Juniper Networks",
          "versions": [
            {
              "lessThan": "17.3R3-S9",
              "status": "affected",
              "version": "17.3",
              "versionType": "custom"
            },
            {
              "lessThan": "17.4R2-S11, 17.4R3-S2, 17.4R3-S3",
              "status": "affected",
              "version": "17.4",
              "versionType": "custom"
            },
            {
              "lessThan": "18.1R3-S11",
              "status": "affected",
              "version": "18.1",
              "versionType": "custom"
            },
            {
              "lessThan": "18.2R3-S5",
              "status": "affected",
              "version": "18.2",
              "versionType": "custom"
            },
            {
              "lessThan": "18.3R2-S4, 18.3R3-S3",
              "status": "affected",
              "version": "18.3",
              "versionType": "custom"
            },
            {
              "lessThan": "18.4R2-S5, 18.4R3-S4",
              "status": "affected",
              "version": "18.4",
              "versionType": "custom"
            },
            {
              "lessThan": "19.1R2-S2, 19.1R3-S2",
              "status": "affected",
              "version": "19.1",
              "versionType": "custom"
            },
            {
              "lessThan": "19.2R1-S5, 19.2R2-S1, 19.2R3",
              "status": "affected",
              "version": "19.2",
              "versionType": "custom"
            },
            {
              "lessThan": "19.3R2-S4, 19.3R3",
              "status": "affected",
              "version": "19.3",
              "versionType": "custom"
            },
            {
              "lessThan": "19.4R1-S3, 19.4R2-S1, 19.4R3",
              "status": "affected",
              "version": "19.4",
              "versionType": "custom"
            },
            {
              "lessThan": "20.1R1-S3, 20.1R2",
              "status": "affected",
              "version": "20.1",
              "versionType": "custom"
            }
          ]
        }
      ],
      "configurations": [
        {
          "lang": "en",
          "value": "The example of the config stanza affected by this issue:\n  [protocols bgp ... family evpn]"
        }
      ],
      "datePublic": "2020-10-14T00:00:00.000Z",
      "descriptions": [
        {
          "lang": "en",
          "value": "On Juniper Networks EX4300-MP Series, EX4600 Series and QFX5K Series deployed in (Ethernet VPN) EVPN-(Virtual Extensible LAN) VXLAN configuration, receipt of a stream of specific VXLAN encapsulated layer 2 frames can cause high CPU load, which could lead to network protocol operation issue and traffic interruption. This issue affects devices that are configured as a Layer 2 or Layer 3 gateway of an EVPN-VXLAN deployment. The offending layer 2 frames that cause the issue originate from a different access switch that get encapsulated within the same EVPN-VXLAN domain. This issue affects Juniper Networks Junos OS on EX4300-MP Series, EX4600 Series and QFX5K Series: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R2-S2, 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R2-S1, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2."
        }
      ],
      "exploits": [
        {
          "lang": "en",
          "value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400 Uncontrolled Resource Consumption",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2020-10-16T20:31:37.000Z",
        "orgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
        "shortName": "juniper"
      },
      "references": [
        {
          "tags": [
            "x_refsource_CONFIRM"
          ],
          "url": "https://kb.juniper.net/JSA11084"
        }
      ],
      "solutions": [
        {
          "lang": "en",
          "value": "The following software releases have been updated to resolve this specific issue: Junos OS 17.3R3-S9, 17.4R2-S11, 17.4R3-S2, 17.4R3-S3, 18.1R3-S11, 18.2R3-S5, 18.3R2-S4, 18.3R3-S3, 18.4R2-S5, 18.4R3-S4, 19.1R2-S2, 19.1R3-S2, 19.2R1-S5, 19.2R2-S1, 19.2R3, 19.3R2-S4, 19.3R3, 19.4R1-S3, 19.4R2-S1, 19.4R3, 20.1R1-S3, 20.1R2, 20.2R1 and all subsequent releases."
        }
      ],
      "source": {
        "advisory": "JSA11084",
        "defect": [
          "1495890"
        ],
        "discovery": "USER"
      },
      "title": "Junos OS: EX4300-MP/EX4600/QFX5K Series: High CPU load due to receipt of specific layer 2 frames in EVPN-VXLAN deployment.",
      "workarounds": [
        {
          "lang": "en",
          "value": "There are no viable workarounds for this issue."
        }
      ],
      "x_generator": {
        "engine": "Vulnogram 0.0.9"
      },
      "x_legacyV4Record": {
        "CVE_data_meta": {
          "ASSIGNER": "sirt@juniper.net",
          "DATE_PUBLIC": "2020-10-14T16:00:00.000Z",
          "ID": "CVE-2020-1687",
          "STATE": "PUBLIC",
          "TITLE": "Junos OS: EX4300-MP/EX4600/QFX5K Series: High CPU load due to receipt of specific layer 2 frames in EVPN-VXLAN deployment."
        },
        "affects": {
          "vendor": {
            "vendor_data": [
              {
                "product": {
                  "product_data": [
                    {
                      "product_name": "Junos OS",
                      "version": {
                        "version_data": [
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "17.3",
                            "version_value": "17.3R3-S9"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "17.4",
                            "version_value": "17.4R2-S11, 17.4R3-S2, 17.4R3-S3"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "18.1",
                            "version_value": "18.1R3-S11"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "18.2",
                            "version_value": "18.2R3-S5"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "18.3",
                            "version_value": "18.3R2-S4, 18.3R3-S3"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "18.4",
                            "version_value": "18.4R2-S5, 18.4R3-S4"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "19.1",
                            "version_value": "19.1R2-S2, 19.1R3-S2"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "19.2",
                            "version_value": "19.2R1-S5, 19.2R2-S1, 19.2R3"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "19.3",
                            "version_value": "19.3R2-S4, 19.3R3"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "19.4",
                            "version_value": "19.4R1-S3, 19.4R2-S1, 19.4R3"
                          },
                          {
                            "platform": "EX4300-MP Series, EX4600Series, QFX5K Series",
                            "version_affected": "\u003c",
                            "version_name": "20.1",
                            "version_value": "20.1R1-S3, 20.1R2"
                          }
                        ]
                      }
                    }
                  ]
                },
                "vendor_name": "Juniper Networks"
              }
            ]
          }
        },
        "configuration": [
          {
            "lang": "en",
            "value": "The example of the config stanza affected by this issue:\n  [protocols bgp ... family evpn]"
          }
        ],
        "data_format": "MITRE",
        "data_type": "CVE",
        "data_version": "4.0",
        "description": {
          "description_data": [
            {
              "lang": "eng",
              "value": "On Juniper Networks EX4300-MP Series, EX4600 Series and QFX5K Series deployed in (Ethernet VPN) EVPN-(Virtual Extensible LAN) VXLAN configuration, receipt of a stream of specific VXLAN encapsulated layer 2 frames can cause high CPU load, which could lead to network protocol operation issue and traffic interruption. This issue affects devices that are configured as a Layer 2 or Layer 3 gateway of an EVPN-VXLAN deployment. The offending layer 2 frames that cause the issue originate from a different access switch that get encapsulated within the same EVPN-VXLAN domain. This issue affects Juniper Networks Junos OS on EX4300-MP Series, EX4600 Series and QFX5K Series: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R2-S2, 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R2-S1, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2."
            }
          ]
        },
        "exploit": [
          {
            "lang": "en",
            "value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
          }
        ],
        "generator": {
          "engine": "Vulnogram 0.0.9"
        },
        "impact": {
          "cvss": {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        },
        "problemtype": {
          "problemtype_data": [
            {
              "description": [
                {
                  "lang": "eng",
                  "value": "CWE-400 Uncontrolled Resource Consumption"
                }
              ]
            }
          ]
        },
        "references": {
          "reference_data": [
            {
              "name": "https://kb.juniper.net/JSA11084",
              "refsource": "CONFIRM",
              "url": "https://kb.juniper.net/JSA11084"
            }
          ]
        },
        "solution": [
          {
            "lang": "en",
            "value": "The following software releases have been updated to resolve this specific issue: Junos OS 17.3R3-S9, 17.4R2-S11, 17.4R3-S2, 17.4R3-S3, 18.1R3-S11, 18.2R3-S5, 18.3R2-S4, 18.3R3-S3, 18.4R2-S5, 18.4R3-S4, 19.1R2-S2, 19.1R3-S2, 19.2R1-S5, 19.2R2-S1, 19.2R3, 19.3R2-S4, 19.3R3, 19.4R1-S3, 19.4R2-S1, 19.4R3, 20.1R1-S3, 20.1R2, 20.2R1 and all subsequent releases."
          }
        ],
        "source": {
          "advisory": "JSA11084",
          "defect": [
            "1495890"
          ],
          "discovery": "USER"
        },
        "work_around": [
          {
            "lang": "en",
            "value": "There are no viable workarounds for this issue."
          }
        ]
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
    "assignerShortName": "juniper",
    "cveId": "CVE-2020-1687",
    "datePublished": "2020-10-16T20:31:37.629Z",
    "dateReserved": "2019-11-04T00:00:00.000Z",
    "dateUpdated": "2024-09-16T19:21:14.782Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}

CVE-2020-1684 (GCVE-0-2020-1684)

Vulnerability from cvelistv5 – Published: 2020-10-16 20:31 – Updated: 2024-09-17 03:18
VLAI
Title
Junos OS: SRX Series: High CPU load due to processing for HTTP traffic when Application Identification is enabled.
Summary
On Juniper Networks SRX Series configured with application identification inspection enabled, receipt of specific HTTP traffic can cause high CPU load utilization, which could lead to traffic interruption. Application identification is enabled by default and is automatically turned on when Intrusion Detection and Prevention (IDP), AppFW, AppQoS, or AppTrack is configured. Thus, this issue might occur when IDP, AppFW, AppQoS, or AppTrack is configured. This issue affects Juniper Networks Junos OS on SRX Series: 12.3X48 versions prior to 12.3X48-D105; 15.1X49 versions prior to 15.1X49-D221, 15.1X49-D230; 17.4 versions prior to 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S3; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R2-S5, 18.4R3-S1; 19.1 versions prior to 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2.
CWE
  • CWE-400 - Uncontrolled Resource Consumption
Assigner
juniper CNA under the mitre root
CNA scorecard B 84/100 over 193 records in the last 180 days details
References
URL Tags
https://kb.juniper.net/JSA11081 x_refsource_CONFIRM
Impacted products
Vendor Product Version
Juniper Networks Junos OS Affected: 12.3X48 , < 12.3X48-D105 (custom)
Affected: 15.1X49 , < 15.1X49-D221, 15.1X49-D230 (custom)
Affected: 17.4 , < 17.4R3-S3 (custom)
Affected: 18.1 , < 18.1R3-S11 (custom)
Affected: 18.2 , < 18.2R3-S3 (custom)
Affected: 18.3 , < 18.3R2-S4, 18.3R3-S2 (custom)
Affected: 18.4 , < 18.4R2-S5, 18.4R3-S1 (custom)
Affected: 19.1 , < 19.1R2-S2, 19.1R3 (custom)
Affected: 19.2 , < 19.2R1-S5, 19.2R2 (custom)
Affected: 19.3 , < 19.3R3 (custom)
Affected: 19.4 , < 19.4R2 (custom)
Create a notification for this product.
Date Public
2020-10-14 00:00
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2024-08-04T06:46:30.890Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "tags": [
              "x_refsource_CONFIRM",
              "x_transferred"
            ],
            "url": "https://kb.juniper.net/JSA11081"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "platforms": [
            "SRX Series"
          ],
          "product": "Junos OS",
          "vendor": "Juniper Networks",
          "versions": [
            {
              "lessThan": "12.3X48-D105",
              "status": "affected",
              "version": "12.3X48",
              "versionType": "custom"
            },
            {
              "lessThan": "15.1X49-D221, 15.1X49-D230",
              "status": "affected",
              "version": "15.1X49",
              "versionType": "custom"
            },
            {
              "lessThan": "17.4R3-S3",
              "status": "affected",
              "version": "17.4",
              "versionType": "custom"
            },
            {
              "lessThan": "18.1R3-S11",
              "status": "affected",
              "version": "18.1",
              "versionType": "custom"
            },
            {
              "lessThan": "18.2R3-S3",
              "status": "affected",
              "version": "18.2",
              "versionType": "custom"
            },
            {
              "lessThan": "18.3R2-S4, 18.3R3-S2",
              "status": "affected",
              "version": "18.3",
              "versionType": "custom"
            },
            {
              "lessThan": "18.4R2-S5, 18.4R3-S1",
              "status": "affected",
              "version": "18.4",
              "versionType": "custom"
            },
            {
              "lessThan": "19.1R2-S2, 19.1R3",
              "status": "affected",
              "version": "19.1",
              "versionType": "custom"
            },
            {
              "lessThan": "19.2R1-S5, 19.2R2",
              "status": "affected",
              "version": "19.2",
              "versionType": "custom"
            },
            {
              "lessThan": "19.3R3",
              "status": "affected",
              "version": "19.3",
              "versionType": "custom"
            },
            {
              "lessThan": "19.4R2",
              "status": "affected",
              "version": "19.4",
              "versionType": "custom"
            }
          ]
        }
      ],
      "configurations": [
        {
          "lang": "en",
          "value": "Application identification is enabled by default. Administrator can disable application identification with the CLI.\nTo disable application identification:\n   user@host# set services application-identification no-application-identification\n   user@host# commit\nOr (depending on the version)\n   user@host# set system processes application-identification disable\n   user@host# commit\n\nTo check whether is enabled, administrator can use the following command:\n   user@host\u003e show services application-identification application summary"
        }
      ],
      "datePublic": "2020-10-14T00:00:00.000Z",
      "descriptions": [
        {
          "lang": "en",
          "value": "On Juniper Networks SRX Series configured with application identification inspection enabled, receipt of specific HTTP traffic can cause high CPU load utilization, which could lead to traffic interruption. Application identification is enabled by default and is automatically turned on when Intrusion Detection and Prevention (IDP), AppFW, AppQoS, or AppTrack is configured. Thus, this issue might occur when IDP, AppFW, AppQoS, or AppTrack is configured. This issue affects Juniper Networks Junos OS on SRX Series: 12.3X48 versions prior to 12.3X48-D105; 15.1X49 versions prior to 15.1X49-D221, 15.1X49-D230; 17.4 versions prior to 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S3; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R2-S5, 18.4R3-S1; 19.1 versions prior to 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2."
        }
      ],
      "exploits": [
        {
          "lang": "en",
          "value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400 Uncontrolled Resource Consumption",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2020-10-16T20:31:36.000Z",
        "orgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
        "shortName": "juniper"
      },
      "references": [
        {
          "tags": [
            "x_refsource_CONFIRM"
          ],
          "url": "https://kb.juniper.net/JSA11081"
        }
      ],
      "solutions": [
        {
          "lang": "en",
          "value": "The following software releases have been updated to resolve this specific issue: Junos OS 12.3X48-D105, 15.1X49-D221, 15.1X49-D230, 17.4R3-S3, 18.1R3-S11, 18.2R3-S3, 18.3R2-S4, 18.3R3-S2, 18.4R2-S5, 18.4R3-S1, 19.1R2-S2, 19.1R3, 19.2R1-S5, 19.2R2, 19.3R3, 19.4R2, 20.1R1,and all subsequent releases."
        }
      ],
      "source": {
        "advisory": "JSA11081",
        "defect": [
          "1473151"
        ],
        "discovery": "USER"
      },
      "title": "Junos OS: SRX Series: High CPU load due to processing for HTTP traffic when Application Identification is enabled.",
      "workarounds": [
        {
          "lang": "en",
          "value": "There are no viable workarounds for this issue."
        }
      ],
      "x_generator": {
        "engine": "Vulnogram 0.0.9"
      },
      "x_legacyV4Record": {
        "CVE_data_meta": {
          "ASSIGNER": "sirt@juniper.net",
          "DATE_PUBLIC": "2020-10-14T16:00:00.000Z",
          "ID": "CVE-2020-1684",
          "STATE": "PUBLIC",
          "TITLE": "Junos OS: SRX Series: High CPU load due to processing for HTTP traffic when Application Identification is enabled."
        },
        "affects": {
          "vendor": {
            "vendor_data": [
              {
                "product": {
                  "product_data": [
                    {
                      "product_name": "Junos OS",
                      "version": {
                        "version_data": [
                          {
                            "platform": "SRX Series",
                            "version_affected": "\u003c",
                            "version_name": "12.3X48",
                            "version_value": "12.3X48-D105"
                          },
                          {
                            "platform": "SRX Series",
                            "version_affected": "\u003c",
                            "version_name": "15.1X49",
                            "version_value": "15.1X49-D221, 15.1X49-D230"
                          },
                          {
                            "platform": "SRX Series",
                            "version_affected": "\u003c",
                            "version_name": "17.4",
                            "version_value": "17.4R3-S3"
                          },
                          {
                            "platform": "SRX Series",
                            "version_affected": "\u003c",
                            "version_name": "18.1",
                            "version_value": "18.1R3-S11"
                          },
                          {
                            "platform": "SRX Series",
                            "version_affected": "\u003c",
                            "version_name": "18.2",
                            "version_value": "18.2R3-S3"
                          },
                          {
                            "platform": "SRX Series",
                            "version_affected": "\u003c",
                            "version_name": "18.3",
                            "version_value": "18.3R2-S4, 18.3R3-S2"
                          },
                          {
                            "platform": "SRX Series",
                            "version_affected": "\u003c",
                            "version_name": "18.4",
                            "version_value": "18.4R2-S5, 18.4R3-S1"
                          },
                          {
                            "platform": "SRX Series",
                            "version_affected": "\u003c",
                            "version_name": "19.1",
                            "version_value": "19.1R2-S2, 19.1R3"
                          },
                          {
                            "platform": "SRX Series",
                            "version_affected": "\u003c",
                            "version_name": "19.2",
                            "version_value": "19.2R1-S5, 19.2R2"
                          },
                          {
                            "platform": "SRX Series",
                            "version_affected": "\u003c",
                            "version_name": "19.3",
                            "version_value": "19.3R3"
                          },
                          {
                            "platform": "SRX Series",
                            "version_affected": "\u003c",
                            "version_name": "19.4",
                            "version_value": "19.4R2"
                          }
                        ]
                      }
                    }
                  ]
                },
                "vendor_name": "Juniper Networks"
              }
            ]
          }
        },
        "configuration": [
          {
            "lang": "en",
            "value": "Application identification is enabled by default. Administrator can disable application identification with the CLI.\nTo disable application identification:\n   user@host# set services application-identification no-application-identification\n   user@host# commit\nOr (depending on the version)\n   user@host# set system processes application-identification disable\n   user@host# commit\n\nTo check whether is enabled, administrator can use the following command:\n   user@host\u003e show services application-identification application summary"
          }
        ],
        "data_format": "MITRE",
        "data_type": "CVE",
        "data_version": "4.0",
        "description": {
          "description_data": [
            {
              "lang": "eng",
              "value": "On Juniper Networks SRX Series configured with application identification inspection enabled, receipt of specific HTTP traffic can cause high CPU load utilization, which could lead to traffic interruption. Application identification is enabled by default and is automatically turned on when Intrusion Detection and Prevention (IDP), AppFW, AppQoS, or AppTrack is configured. Thus, this issue might occur when IDP, AppFW, AppQoS, or AppTrack is configured. This issue affects Juniper Networks Junos OS on SRX Series: 12.3X48 versions prior to 12.3X48-D105; 15.1X49 versions prior to 15.1X49-D221, 15.1X49-D230; 17.4 versions prior to 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S3; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R2-S5, 18.4R3-S1; 19.1 versions prior to 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2."
            }
          ]
        },
        "exploit": [
          {
            "lang": "en",
            "value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
          }
        ],
        "generator": {
          "engine": "Vulnogram 0.0.9"
        },
        "impact": {
          "cvss": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        },
        "problemtype": {
          "problemtype_data": [
            {
              "description": [
                {
                  "lang": "eng",
                  "value": "CWE-400 Uncontrolled Resource Consumption"
                }
              ]
            }
          ]
        },
        "references": {
          "reference_data": [
            {
              "name": "https://kb.juniper.net/JSA11081",
              "refsource": "CONFIRM",
              "url": "https://kb.juniper.net/JSA11081"
            }
          ]
        },
        "solution": [
          {
            "lang": "en",
            "value": "The following software releases have been updated to resolve this specific issue: Junos OS 12.3X48-D105, 15.1X49-D221, 15.1X49-D230, 17.4R3-S3, 18.1R3-S11, 18.2R3-S3, 18.3R2-S4, 18.3R3-S2, 18.4R2-S5, 18.4R3-S1, 19.1R2-S2, 19.1R3, 19.2R1-S5, 19.2R2, 19.3R3, 19.4R2, 20.1R1,and all subsequent releases."
          }
        ],
        "source": {
          "advisory": "JSA11081",
          "defect": [
            "1473151"
          ],
          "discovery": "USER"
        },
        "work_around": [
          {
            "lang": "en",
            "value": "There are no viable workarounds for this issue."
          }
        ]
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
    "assignerShortName": "juniper",
    "cveId": "CVE-2020-1684",
    "datePublished": "2020-10-16T20:31:36.334Z",
    "dateReserved": "2019-11-04T00:00:00.000Z",
    "dateUpdated": "2024-09-17T03:18:03.107Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}

CVE-2020-1678 (GCVE-0-2020-1678)

Vulnerability from cvelistv5 – Published: 2020-10-16 20:31 – Updated: 2024-09-16 20:02
VLAI
Title
Junos OS and Junos OS Evolved: RPD can crash due to a slow memory leak.
Summary
On Juniper Networks Junos OS and Junos OS Evolved platforms with EVPN configured, receipt of specific BGP packets causes a slow memory leak. If the memory is exhausted the rpd process might crash. If the issue occurs, the memory leak could be seen by executing the "show task memory detail | match policy | match evpn" command multiple times to check if memory (Alloc Blocks value) is increasing. root@device> show task memory detail | match policy | match evpn ------------------------ Allocator Memory Report ------------------------ Name | Size | Alloc DTXP Size | Alloc Blocks | Alloc Bytes | MaxAlloc Blocks | MaxAlloc Bytes Policy EVPN Params 20 24 3330678 79936272 3330678 79936272 root@device> show task memory detail | match policy | match evpn ------------------------ Allocator Memory Report ------------------------ Name | Size | Alloc DTXP Size | Alloc Blocks | Alloc Bytes | MaxAlloc Blocks | MaxAlloc Bytes Policy EVPN Params 20 24 36620255 878886120 36620255 878886120 This issue affects: Juniper Networks Junos OS 19.4 versions prior to 19.4R2; 20.1 versions prior to 20.1R1-S4, 20.1R2; Juniper Networks Junos OS Evolved: 19.4 versions; 20.1 versions prior to 20.1R1-S4-EVO, 20.1R2-EVO; 20.2 versions prior to 20.2R1-EVO; This issue does not affect: Juniper Networks Junos OS releases prior to 19.4R1. Juniper Networks Junos OS Evolved releases prior to 19.4R1-EVO.
CWE
  • CWE-400 - Uncontrolled Resource Consumption
Assigner
juniper CNA under the mitre root
CNA scorecard B 84/100 over 193 records in the last 180 days details
References
URL Tags
https://kb.juniper.net/JSA11075 x_refsource_CONFIRM
Impacted products
Vendor Product Version
Juniper Networks Junos OS Affected: 19.4 , < 19.4R2 (custom)
Affected: 20.1 , < 20.1R1-S4, 20.1R2 (custom)
Create a notification for this product.
Juniper Networks Junos OS Evolved Affected: 19.4-EVO
Affected: 20.1-EVO , < 20.1R1-S4-EVO, 20.1R2-EVO (custom)
Create a notification for this product.
Date Public
2020-10-14 00:00
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2024-08-04T06:46:30.296Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "tags": [
              "x_refsource_CONFIRM",
              "x_transferred"
            ],
            "url": "https://kb.juniper.net/JSA11075"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "product": "Junos OS",
          "vendor": "Juniper Networks",
          "versions": [
            {
              "lessThan": "19.4R2",
              "status": "affected",
              "version": "19.4",
              "versionType": "custom"
            },
            {
              "lessThan": "20.1R1-S4, 20.1R2",
              "status": "affected",
              "version": "20.1",
              "versionType": "custom"
            }
          ]
        },
        {
          "product": "Junos OS Evolved",
          "vendor": "Juniper Networks",
          "versions": [
            {
              "status": "affected",
              "version": "19.4-EVO"
            },
            {
              "lessThan": "20.1R1-S4-EVO, 20.1R2-EVO",
              "status": "affected",
              "version": "20.1-EVO",
              "versionType": "custom"
            }
          ]
        }
      ],
      "configurations": [
        {
          "lang": "en",
          "value": "The example of the configuration stanza affected by this issue is as follows:\n   [protocols evpn]"
        }
      ],
      "datePublic": "2020-10-14T00:00:00.000Z",
      "descriptions": [
        {
          "lang": "en",
          "value": "On Juniper Networks Junos OS and Junos OS Evolved platforms with EVPN configured, receipt of specific BGP packets causes a slow memory leak. If the memory is exhausted the rpd process might crash. If the issue occurs, the memory leak could be seen by executing the \"show task memory detail | match policy | match evpn\" command multiple times to check if memory (Alloc Blocks value) is increasing. root@device\u003e show task memory detail | match policy | match evpn ------------------------ Allocator Memory Report ------------------------ Name | Size | Alloc DTXP Size | Alloc Blocks | Alloc Bytes | MaxAlloc Blocks | MaxAlloc Bytes Policy EVPN Params 20 24 3330678 79936272 3330678 79936272 root@device\u003e show task memory detail | match policy | match evpn ------------------------ Allocator Memory Report ------------------------ Name | Size | Alloc DTXP Size | Alloc Blocks | Alloc Bytes | MaxAlloc Blocks | MaxAlloc Bytes Policy EVPN Params 20 24 36620255 878886120 36620255 878886120 This issue affects: Juniper Networks Junos OS 19.4 versions prior to 19.4R2; 20.1 versions prior to 20.1R1-S4, 20.1R2; Juniper Networks Junos OS Evolved: 19.4 versions; 20.1 versions prior to 20.1R1-S4-EVO, 20.1R2-EVO; 20.2 versions prior to 20.2R1-EVO; This issue does not affect: Juniper Networks Junos OS releases prior to 19.4R1. Juniper Networks Junos OS Evolved releases prior to 19.4R1-EVO."
        }
      ],
      "exploits": [
        {
          "lang": "en",
          "value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400 Uncontrolled Resource Consumption",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2020-10-16T20:31:33.000Z",
        "orgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
        "shortName": "juniper"
      },
      "references": [
        {
          "tags": [
            "x_refsource_CONFIRM"
          ],
          "url": "https://kb.juniper.net/JSA11075"
        }
      ],
      "solutions": [
        {
          "lang": "en",
          "value": "The following software releases have been updated to resolve this specific issue:\n\nJunos OS: 19.4R2, 19.4R3, 20.1R1-S4, 20.1R2, 20.2R1 and all subsequent releases.\n\nJunos OS Evolved: 20.1R1-S4-EVO, 20.1R2-EVO, 20.2R1-EVO, and all subsequent releases."
        }
      ],
      "source": {
        "advisory": "JSA11075",
        "defect": [
          "1490269"
        ],
        "discovery": "USER"
      },
      "title": "Junos OS and Junos OS Evolved:  RPD can crash due to a slow memory leak.",
      "workarounds": [
        {
          "lang": "en",
          "value": "There are no viable workarounds for this issue."
        }
      ],
      "x_generator": {
        "engine": "Vulnogram 0.0.9"
      },
      "x_legacyV4Record": {
        "CVE_data_meta": {
          "ASSIGNER": "sirt@juniper.net",
          "DATE_PUBLIC": "2020-10-14T07:00:00.000Z",
          "ID": "CVE-2020-1678",
          "STATE": "PUBLIC",
          "TITLE": "Junos OS and Junos OS Evolved:  RPD can crash due to a slow memory leak."
        },
        "affects": {
          "vendor": {
            "vendor_data": [
              {
                "product": {
                  "product_data": [
                    {
                      "product_name": "Junos OS",
                      "version": {
                        "version_data": [
                          {
                            "version_affected": "\u003c",
                            "version_name": "19.4",
                            "version_value": "19.4R2"
                          },
                          {
                            "version_affected": "\u003c",
                            "version_name": "20.1",
                            "version_value": "20.1R1-S4, 20.1R2"
                          }
                        ]
                      }
                    },
                    {
                      "product_name": "Junos OS Evolved",
                      "version": {
                        "version_data": [
                          {
                            "version_affected": "=",
                            "version_name": "19.4-EVO",
                            "version_value": "19.4-EVO"
                          },
                          {
                            "version_affected": "\u003c",
                            "version_name": "20.1-EVO",
                            "version_value": "20.1R1-S4-EVO, 20.1R2-EVO"
                          }
                        ]
                      }
                    }
                  ]
                },
                "vendor_name": "Juniper Networks"
              }
            ]
          }
        },
        "configuration": [
          {
            "lang": "en",
            "value": "The example of the configuration stanza affected by this issue is as follows:\n   [protocols evpn]"
          }
        ],
        "data_format": "MITRE",
        "data_type": "CVE",
        "data_version": "4.0",
        "description": {
          "description_data": [
            {
              "lang": "eng",
              "value": "On Juniper Networks Junos OS and Junos OS Evolved platforms with EVPN configured, receipt of specific BGP packets causes a slow memory leak. If the memory is exhausted the rpd process might crash. If the issue occurs, the memory leak could be seen by executing the \"show task memory detail | match policy | match evpn\" command multiple times to check if memory (Alloc Blocks value) is increasing. root@device\u003e show task memory detail | match policy | match evpn ------------------------ Allocator Memory Report ------------------------ Name | Size | Alloc DTXP Size | Alloc Blocks | Alloc Bytes | MaxAlloc Blocks | MaxAlloc Bytes Policy EVPN Params 20 24 3330678 79936272 3330678 79936272 root@device\u003e show task memory detail | match policy | match evpn ------------------------ Allocator Memory Report ------------------------ Name | Size | Alloc DTXP Size | Alloc Blocks | Alloc Bytes | MaxAlloc Blocks | MaxAlloc Bytes Policy EVPN Params 20 24 36620255 878886120 36620255 878886120 This issue affects: Juniper Networks Junos OS 19.4 versions prior to 19.4R2; 20.1 versions prior to 20.1R1-S4, 20.1R2; Juniper Networks Junos OS Evolved: 19.4 versions; 20.1 versions prior to 20.1R1-S4-EVO, 20.1R2-EVO; 20.2 versions prior to 20.2R1-EVO; This issue does not affect: Juniper Networks Junos OS releases prior to 19.4R1. Juniper Networks Junos OS Evolved releases prior to 19.4R1-EVO."
            }
          ]
        },
        "exploit": [
          {
            "lang": "en",
            "value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
          }
        ],
        "generator": {
          "engine": "Vulnogram 0.0.9"
        },
        "impact": {
          "cvss": {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        },
        "problemtype": {
          "problemtype_data": [
            {
              "description": [
                {
                  "lang": "eng",
                  "value": "CWE-400 Uncontrolled Resource Consumption"
                }
              ]
            }
          ]
        },
        "references": {
          "reference_data": [
            {
              "name": "https://kb.juniper.net/JSA11075",
              "refsource": "CONFIRM",
              "url": "https://kb.juniper.net/JSA11075"
            }
          ]
        },
        "solution": [
          {
            "lang": "en",
            "value": "The following software releases have been updated to resolve this specific issue:\n\nJunos OS: 19.4R2, 19.4R3, 20.1R1-S4, 20.1R2, 20.2R1 and all subsequent releases.\n\nJunos OS Evolved: 20.1R1-S4-EVO, 20.1R2-EVO, 20.2R1-EVO, and all subsequent releases."
          }
        ],
        "source": {
          "advisory": "JSA11075",
          "defect": [
            "1490269"
          ],
          "discovery": "USER"
        },
        "work_around": [
          {
            "lang": "en",
            "value": "There are no viable workarounds for this issue."
          }
        ]
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
    "assignerShortName": "juniper",
    "cveId": "CVE-2020-1678",
    "datePublished": "2020-10-16T20:31:33.681Z",
    "dateReserved": "2019-11-04T00:00:00.000Z",
    "dateUpdated": "2024-09-16T20:02:44.063Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}

CVE-2020-1670 (GCVE-0-2020-1670)

Vulnerability from cvelistv5 – Published: 2020-10-16 20:31 – Updated: 2024-09-17 01:31
VLAI
Title
Junos OS: EX4300 Series: High CPU load due to receipt of specific IPv4 packets
Summary
On Juniper Networks EX4300 Series, receipt of a stream of specific IPv4 packets can cause Routing Engine (RE) high CPU load, which could lead to network protocol operation issue and traffic interruption. This specific packets can originate only from within the broadcast domain where the device is connected. This issue occurs when the packets enter to the IRB interface. Only IPv4 packets can trigger this issue. IPv6 packets cannot trigger this issue. This issue affects Juniper Networks Junos OS on EX4300 series: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R3-S4; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R2-S4, 18.4R3-S2; 19.1 versions prior to 19.1R2-S2, 19.1R3-S1; 19.2 versions prior to 19.2R1-S5, 19.2R2-S1, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2; 20.1 versions prior to 20.1R1-S3, 20.1R2.
CWE
  • CWE-400 - Uncontrolled Resource Consumption
Assigner
juniper CNA under the mitre root
CNA scorecard B 84/100 over 193 records in the last 180 days details
References
URL Tags
https://kb.juniper.net/ x_refsource_MISC
Impacted products
Vendor Product Version
Juniper Networks Junos OS Affected: 17.3 , < 17.3R3-S9 (custom)
Affected: 17.4 , < 17.4R2-S11, 17.4R3-S2 (custom)
Affected: 18.1 , < 18.1R3-S10 (custom)
Affected: 18.2 , < 18.2R3-S4 (custom)
Affected: 18.3 , < 18.3R2-S4, 18.3R3-S2 (custom)
Affected: 18.4 , < 18.4R2-S4, 18.4R3-S2 (custom)
Affected: 19.1 , < 19.1R2-S2, 19.1R3-S1 (custom)
Affected: 19.2 , < 19.2R1-S5, 19.2R2-S1, 19.2R3 (custom)
Affected: 19.3 , < 19.3R2-S4, 19.3R3 (custom)
Affected: 19.4 , < 19.4R1-S3, 19.4R2 (custom)
Affected: 20.1 , < 20.1R1-S3, 20.1R2 (custom)
Create a notification for this product.
Date Public
2020-10-14 00:00
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2024-08-04T06:46:30.115Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "tags": [
              "x_refsource_MISC",
              "x_transferred"
            ],
            "url": "https://kb.juniper.net/"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "platforms": [
            "EX4300 series"
          ],
          "product": "Junos OS",
          "vendor": "Juniper Networks",
          "versions": [
            {
              "lessThan": "17.3R3-S9",
              "status": "affected",
              "version": "17.3",
              "versionType": "custom"
            },
            {
              "lessThan": "17.4R2-S11, 17.4R3-S2",
              "status": "affected",
              "version": "17.4",
              "versionType": "custom"
            },
            {
              "lessThan": "18.1R3-S10",
              "status": "affected",
              "version": "18.1",
              "versionType": "custom"
            },
            {
              "lessThan": "18.2R3-S4",
              "status": "affected",
              "version": "18.2",
              "versionType": "custom"
            },
            {
              "lessThan": "18.3R2-S4, 18.3R3-S2",
              "status": "affected",
              "version": "18.3",
              "versionType": "custom"
            },
            {
              "lessThan": "18.4R2-S4, 18.4R3-S2",
              "status": "affected",
              "version": "18.4",
              "versionType": "custom"
            },
            {
              "lessThan": "19.1R2-S2, 19.1R3-S1",
              "status": "affected",
              "version": "19.1",
              "versionType": "custom"
            },
            {
              "lessThan": "19.2R1-S5, 19.2R2-S1, 19.2R3",
              "status": "affected",
              "version": "19.2",
              "versionType": "custom"
            },
            {
              "lessThan": "19.3R2-S4, 19.3R3",
              "status": "affected",
              "version": "19.3",
              "versionType": "custom"
            },
            {
              "lessThan": "19.4R1-S3, 19.4R2",
              "status": "affected",
              "version": "19.4",
              "versionType": "custom"
            },
            {
              "lessThan": "20.1R1-S3, 20.1R2",
              "status": "affected",
              "version": "20.1",
              "versionType": "custom"
            }
          ]
        }
      ],
      "configurations": [
        {
          "lang": "en",
          "value": "The example of the configuration stanza affected by this issue is as follows:\n  [interfaces irb unit \u003cUNIT_NUMBER\u003e]"
        }
      ],
      "datePublic": "2020-10-14T00:00:00.000Z",
      "descriptions": [
        {
          "lang": "en",
          "value": "On Juniper Networks EX4300 Series, receipt of a stream of specific IPv4 packets can cause Routing Engine (RE) high CPU load, which could lead to network protocol operation issue and traffic interruption. This specific packets can originate only from within the broadcast domain where the device is connected. This issue occurs when the packets enter to the IRB interface. Only IPv4 packets can trigger this issue. IPv6 packets cannot trigger this issue. This issue affects Juniper Networks Junos OS on EX4300 series: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R3-S4; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R2-S4, 18.4R3-S2; 19.1 versions prior to 19.1R2-S2, 19.1R3-S1; 19.2 versions prior to 19.2R1-S5, 19.2R2-S1, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2; 20.1 versions prior to 20.1R1-S3, 20.1R2."
        }
      ],
      "exploits": [
        {
          "lang": "en",
          "value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400 Uncontrolled Resource Consumption",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2020-10-16T20:31:29.000Z",
        "orgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
        "shortName": "juniper"
      },
      "references": [
        {
          "tags": [
            "x_refsource_MISC"
          ],
          "url": "https://kb.juniper.net/"
        }
      ],
      "solutions": [
        {
          "lang": "en",
          "value": "The following software releases have been updated to resolve this specific issue: 17.3R3-S9, 17.4R2-S11, 17.4R3-S2, 18.1R3-S10, 18.2R3-S4, 18.3R2-S4, 18.3R3-S2, 18.4R2-S4, 18.4R3-S2, 19.1R2-S2, 19.1R3-S1, 19.2R1-S5, 19.2R2-S1, 19.2R3, 19.3R2-S4, 19.3R3, 19.4R1-S3, 19.4R2, 20.1R1-S3, 20.1R2, 20.2R1 and all subsequent releases."
        }
      ],
      "source": {
        "advisory": "JSA11067",
        "defect": [
          "1495129"
        ],
        "discovery": "USER"
      },
      "title": "Junos OS: EX4300 Series: High CPU load due to receipt of specific IPv4 packets",
      "workarounds": [
        {
          "lang": "en",
          "value": "There are no viable workarounds for this issue."
        }
      ],
      "x_generator": {
        "engine": "Vulnogram 0.0.9"
      },
      "x_legacyV4Record": {
        "CVE_data_meta": {
          "ASSIGNER": "sirt@juniper.net",
          "DATE_PUBLIC": "2020-10-14T16:00:00.000Z",
          "ID": "CVE-2020-1670",
          "STATE": "PUBLIC",
          "TITLE": "Junos OS: EX4300 Series: High CPU load due to receipt of specific IPv4 packets"
        },
        "affects": {
          "vendor": {
            "vendor_data": [
              {
                "product": {
                  "product_data": [
                    {
                      "product_name": "Junos OS",
                      "version": {
                        "version_data": [
                          {
                            "platform": "EX4300 series",
                            "version_affected": "\u003c",
                            "version_name": "17.3",
                            "version_value": "17.3R3-S9"
                          },
                          {
                            "platform": "EX4300 series",
                            "version_affected": "\u003c",
                            "version_name": "17.4",
                            "version_value": "17.4R2-S11, 17.4R3-S2"
                          },
                          {
                            "platform": "EX4300 series",
                            "version_affected": "\u003c",
                            "version_name": "18.1",
                            "version_value": "18.1R3-S10"
                          },
                          {
                            "platform": "EX4300 series",
                            "version_affected": "\u003c",
                            "version_name": "18.2",
                            "version_value": "18.2R3-S4"
                          },
                          {
                            "platform": "EX4300 series",
                            "version_affected": "\u003c",
                            "version_name": "18.3",
                            "version_value": "18.3R2-S4, 18.3R3-S2"
                          },
                          {
                            "platform": "EX4300 series",
                            "version_affected": "\u003c",
                            "version_name": "18.4",
                            "version_value": "18.4R2-S4, 18.4R3-S2"
                          },
                          {
                            "platform": "EX4300 series",
                            "version_affected": "\u003c",
                            "version_name": "19.1",
                            "version_value": "19.1R2-S2, 19.1R3-S1"
                          },
                          {
                            "platform": "EX4300 series",
                            "version_affected": "\u003c",
                            "version_name": "19.2",
                            "version_value": "19.2R1-S5, 19.2R2-S1, 19.2R3"
                          },
                          {
                            "platform": "EX4300 series",
                            "version_affected": "\u003c",
                            "version_name": "19.3",
                            "version_value": "19.3R2-S4, 19.3R3"
                          },
                          {
                            "platform": "EX4300 series",
                            "version_affected": "\u003c",
                            "version_name": "19.4",
                            "version_value": "19.4R1-S3, 19.4R2"
                          },
                          {
                            "platform": "EX4300 series",
                            "version_affected": "\u003c",
                            "version_name": "20.1",
                            "version_value": "20.1R1-S3, 20.1R2"
                          }
                        ]
                      }
                    }
                  ]
                },
                "vendor_name": "Juniper Networks"
              }
            ]
          }
        },
        "configuration": [
          {
            "lang": "en",
            "value": "The example of the configuration stanza affected by this issue is as follows:\n  [interfaces irb unit \u003cUNIT_NUMBER\u003e]"
          }
        ],
        "data_format": "MITRE",
        "data_type": "CVE",
        "data_version": "4.0",
        "description": {
          "description_data": [
            {
              "lang": "eng",
              "value": "On Juniper Networks EX4300 Series, receipt of a stream of specific IPv4 packets can cause Routing Engine (RE) high CPU load, which could lead to network protocol operation issue and traffic interruption. This specific packets can originate only from within the broadcast domain where the device is connected. This issue occurs when the packets enter to the IRB interface. Only IPv4 packets can trigger this issue. IPv6 packets cannot trigger this issue. This issue affects Juniper Networks Junos OS on EX4300 series: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R3-S4; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R2-S4, 18.4R3-S2; 19.1 versions prior to 19.1R2-S2, 19.1R3-S1; 19.2 versions prior to 19.2R1-S5, 19.2R2-S1, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2; 20.1 versions prior to 20.1R1-S3, 20.1R2."
            }
          ]
        },
        "exploit": [
          {
            "lang": "en",
            "value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
          }
        ],
        "generator": {
          "engine": "Vulnogram 0.0.9"
        },
        "impact": {
          "cvss": {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        },
        "problemtype": {
          "problemtype_data": [
            {
              "description": [
                {
                  "lang": "eng",
                  "value": "CWE-400 Uncontrolled Resource Consumption"
                }
              ]
            }
          ]
        },
        "references": {
          "reference_data": [
            {
              "name": "https://kb.juniper.net/",
              "refsource": "MISC",
              "url": "https://kb.juniper.net/"
            }
          ]
        },
        "solution": [
          {
            "lang": "en",
            "value": "The following software releases have been updated to resolve this specific issue: 17.3R3-S9, 17.4R2-S11, 17.4R3-S2, 18.1R3-S10, 18.2R3-S4, 18.3R2-S4, 18.3R3-S2, 18.4R2-S4, 18.4R3-S2, 19.1R2-S2, 19.1R3-S1, 19.2R1-S5, 19.2R2-S1, 19.2R3, 19.3R2-S4, 19.3R3, 19.4R1-S3, 19.4R2, 20.1R1-S3, 20.1R2, 20.2R1 and all subsequent releases."
          }
        ],
        "source": {
          "advisory": "JSA11067",
          "defect": [
            "1495129"
          ],
          "discovery": "USER"
        },
        "work_around": [
          {
            "lang": "en",
            "value": "There are no viable workarounds for this issue."
          }
        ]
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
    "assignerShortName": "juniper",
    "cveId": "CVE-2020-1670",
    "datePublished": "2020-10-16T20:31:30.005Z",
    "dateReserved": "2019-11-04T00:00:00.000Z",
    "dateUpdated": "2024-09-17T01:31:28.436Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}

CVE-2020-1668 (GCVE-0-2020-1668)

Vulnerability from cvelistv5 – Published: 2020-10-16 20:31 – Updated: 2024-09-16 18:18
VLAI
Title
Junos OS: EX2300 Series: High CPU load due to receipt of specific multicast packets on layer 2 interface
Summary
On Juniper Networks EX2300 Series, receipt of a stream of specific multicast packets by the layer2 interface can cause high CPU load, which could lead to traffic interruption. This issue occurs when multicast packets are received by the layer 2 interface. To check if the device has high CPU load due to this issue, the administrator can issue the following command: user@host> show chassis routing-engine Routing Engine status: ... Idle 2 percent the "Idle" value shows as low (2 % in the example above), and also the following command: user@host> show system processes summary ... PID USERNAME PRI NICE SIZE RES STATE TIME WCPU COMMAND 11639 root 52 0 283M 11296K select 12:15 44.97% eventd 11803 root 81 0 719M 239M RUN 251:12 31.98% fxpc{fxpc} the eventd and the fxpc processes might use higher WCPU percentage (respectively 44.97% and 31.98% in the above example). This issue affects Juniper Networks Junos OS on EX2300 Series: 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S2, 20.1R2.
CWE
  • CWE-400 - Uncontrolled Resource Consumption
Assigner
juniper CNA under the mitre root
CNA scorecard B 84/100 over 193 records in the last 180 days details
References
URL Tags
https://kb.juniper.net/JSA11065 x_refsource_CONFIRM
Impacted products
Vendor Product Version
Juniper Networks Junos OS Affected: 18.1 , < 18.1R3-S11 (custom)
Affected: 18.2 , < 18.2R3-S5 (custom)
Affected: 18.3 , < 18.3R2-S4, 18.3R3-S3 (custom)
Affected: 18.4 , < 18.4R2-S5, 18.4R3-S4 (custom)
Affected: 19.1 , < 19.1R3-S2 (custom)
Affected: 19.2 , < 19.2R1-S5, 19.2R3 (custom)
Affected: 19.3 , < 19.3R2-S4, 19.3R3 (custom)
Affected: 19.4 , < 19.4R1-S3, 19.4R2-S1, 19.4R3 (custom)
Affected: 20.1 , < 20.1R1-S2, 20.1R2 (custom)
Create a notification for this product.
Date Public
2020-10-14 00:00
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2024-08-04T06:46:29.743Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "tags": [
              "x_refsource_CONFIRM",
              "x_transferred"
            ],
            "url": "https://kb.juniper.net/JSA11065"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "platforms": [
            "EX2300 Series"
          ],
          "product": "Junos OS",
          "vendor": "Juniper Networks",
          "versions": [
            {
              "lessThan": "18.1R3-S11",
              "status": "affected",
              "version": "18.1",
              "versionType": "custom"
            },
            {
              "lessThan": "18.2R3-S5",
              "status": "affected",
              "version": "18.2",
              "versionType": "custom"
            },
            {
              "lessThan": "18.3R2-S4, 18.3R3-S3",
              "status": "affected",
              "version": "18.3",
              "versionType": "custom"
            },
            {
              "lessThan": "18.4R2-S5, 18.4R3-S4",
              "status": "affected",
              "version": "18.4",
              "versionType": "custom"
            },
            {
              "lessThan": "19.1R3-S2",
              "status": "affected",
              "version": "19.1",
              "versionType": "custom"
            },
            {
              "lessThan": "19.2R1-S5, 19.2R3",
              "status": "affected",
              "version": "19.2",
              "versionType": "custom"
            },
            {
              "lessThan": "19.3R2-S4, 19.3R3",
              "status": "affected",
              "version": "19.3",
              "versionType": "custom"
            },
            {
              "lessThan": "19.4R1-S3, 19.4R2-S1, 19.4R3",
              "status": "affected",
              "version": "19.4",
              "versionType": "custom"
            },
            {
              "lessThan": "20.1R1-S2, 20.1R2",
              "status": "affected",
              "version": "20.1",
              "versionType": "custom"
            }
          ]
        }
      ],
      "datePublic": "2020-10-14T00:00:00.000Z",
      "descriptions": [
        {
          "lang": "en",
          "value": "On Juniper Networks EX2300 Series, receipt of a stream of specific multicast packets by the layer2 interface can cause high CPU load, which could lead to traffic interruption. This issue occurs when multicast packets are received by the layer 2 interface. To check if the device has high CPU load due to this issue, the administrator can issue the following command: user@host\u003e show chassis routing-engine Routing Engine status: ... Idle 2 percent the \"Idle\" value shows as low (2 % in the example above), and also the following command: user@host\u003e show system processes summary ... PID USERNAME PRI NICE SIZE RES STATE TIME WCPU COMMAND 11639 root 52 0 283M 11296K select 12:15 44.97% eventd 11803 root 81 0 719M 239M RUN 251:12 31.98% fxpc{fxpc} the eventd and the fxpc processes might use higher WCPU percentage (respectively 44.97% and 31.98% in the above example). This issue affects Juniper Networks Junos OS on EX2300 Series: 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S2, 20.1R2."
        }
      ],
      "exploits": [
        {
          "lang": "en",
          "value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400 Uncontrolled Resource Consumption",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2020-10-16T20:31:29.000Z",
        "orgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
        "shortName": "juniper"
      },
      "references": [
        {
          "tags": [
            "x_refsource_CONFIRM"
          ],
          "url": "https://kb.juniper.net/JSA11065"
        }
      ],
      "solutions": [
        {
          "lang": "en",
          "value": "The following software releases have been updated to resolve this specific issue:  Junos OS 18.1R3-S11, 18.2R3-S5, 18.3R2-S4, 18.3R3-S3, 18.4R2-S5, 18.4R3-S4, 19.1R3-S2, 19.2R1-S5, 19.2R3, 19.3R2-S4, 19.3R3, 19.4R1-S3, 19.4R2-S1, 19.4R3, 20.1R1-S2, 20.1R2, 20.2R1, and all subsequent releases."
        }
      ],
      "source": {
        "advisory": "JSA11065",
        "defect": [
          "1491905"
        ],
        "discovery": "USER"
      },
      "title": "Junos OS: EX2300 Series: High CPU load due to receipt of specific multicast packets on layer 2 interface",
      "workarounds": [
        {
          "lang": "en",
          "value": "There are no available workarounds for this issue."
        }
      ],
      "x_generator": {
        "engine": "Vulnogram 0.0.9"
      },
      "x_legacyV4Record": {
        "CVE_data_meta": {
          "ASSIGNER": "sirt@juniper.net",
          "DATE_PUBLIC": "2020-10-14T16:00:00.000Z",
          "ID": "CVE-2020-1668",
          "STATE": "PUBLIC",
          "TITLE": "Junos OS: EX2300 Series: High CPU load due to receipt of specific multicast packets on layer 2 interface"
        },
        "affects": {
          "vendor": {
            "vendor_data": [
              {
                "product": {
                  "product_data": [
                    {
                      "product_name": "Junos OS",
                      "version": {
                        "version_data": [
                          {
                            "platform": "EX2300 Series",
                            "version_affected": "\u003c",
                            "version_name": "18.1",
                            "version_value": "18.1R3-S11"
                          },
                          {
                            "platform": "EX2300 Series",
                            "version_affected": "\u003c",
                            "version_name": "18.2",
                            "version_value": "18.2R3-S5"
                          },
                          {
                            "platform": "EX2300 Series",
                            "version_affected": "\u003c",
                            "version_name": "18.3",
                            "version_value": "18.3R2-S4, 18.3R3-S3"
                          },
                          {
                            "platform": "EX2300 Series",
                            "version_affected": "\u003c",
                            "version_name": "18.4",
                            "version_value": "18.4R2-S5, 18.4R3-S4"
                          },
                          {
                            "platform": "EX2300 Series",
                            "version_affected": "\u003c",
                            "version_name": "19.1",
                            "version_value": "19.1R3-S2"
                          },
                          {
                            "platform": "EX2300 Series",
                            "version_affected": "\u003c",
                            "version_name": "19.2",
                            "version_value": "19.2R1-S5, 19.2R3"
                          },
                          {
                            "platform": "EX2300 Series",
                            "version_affected": "\u003c",
                            "version_name": "19.3",
                            "version_value": "19.3R2-S4, 19.3R3"
                          },
                          {
                            "platform": "EX2300 Series",
                            "version_affected": "\u003c",
                            "version_name": "19.4",
                            "version_value": "19.4R1-S3, 19.4R2-S1, 19.4R3"
                          },
                          {
                            "platform": "EX2300 Series",
                            "version_affected": "\u003c",
                            "version_name": "20.1",
                            "version_value": "20.1R1-S2, 20.1R2"
                          }
                        ]
                      }
                    }
                  ]
                },
                "vendor_name": "Juniper Networks"
              }
            ]
          }
        },
        "data_format": "MITRE",
        "data_type": "CVE",
        "data_version": "4.0",
        "description": {
          "description_data": [
            {
              "lang": "eng",
              "value": "On Juniper Networks EX2300 Series, receipt of a stream of specific multicast packets by the layer2 interface can cause high CPU load, which could lead to traffic interruption. This issue occurs when multicast packets are received by the layer 2 interface. To check if the device has high CPU load due to this issue, the administrator can issue the following command: user@host\u003e show chassis routing-engine Routing Engine status: ... Idle 2 percent the \"Idle\" value shows as low (2 % in the example above), and also the following command: user@host\u003e show system processes summary ... PID USERNAME PRI NICE SIZE RES STATE TIME WCPU COMMAND 11639 root 52 0 283M 11296K select 12:15 44.97% eventd 11803 root 81 0 719M 239M RUN 251:12 31.98% fxpc{fxpc} the eventd and the fxpc processes might use higher WCPU percentage (respectively 44.97% and 31.98% in the above example). This issue affects Juniper Networks Junos OS on EX2300 Series: 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S2, 20.1R2."
            }
          ]
        },
        "exploit": [
          {
            "lang": "en",
            "value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
          }
        ],
        "generator": {
          "engine": "Vulnogram 0.0.9"
        },
        "impact": {
          "cvss": {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        },
        "problemtype": {
          "problemtype_data": [
            {
              "description": [
                {
                  "lang": "eng",
                  "value": "CWE-400 Uncontrolled Resource Consumption"
                }
              ]
            }
          ]
        },
        "references": {
          "reference_data": [
            {
              "name": "https://kb.juniper.net/JSA11065",
              "refsource": "CONFIRM",
              "url": "https://kb.juniper.net/JSA11065"
            }
          ]
        },
        "solution": [
          {
            "lang": "en",
            "value": "The following software releases have been updated to resolve this specific issue:  Junos OS 18.1R3-S11, 18.2R3-S5, 18.3R2-S4, 18.3R3-S3, 18.4R2-S5, 18.4R3-S4, 19.1R3-S2, 19.2R1-S5, 19.2R3, 19.3R2-S4, 19.3R3, 19.4R1-S3, 19.4R2-S1, 19.4R3, 20.1R1-S2, 20.1R2, 20.2R1, and all subsequent releases."
          }
        ],
        "source": {
          "advisory": "JSA11065",
          "defect": [
            "1491905"
          ],
          "discovery": "USER"
        },
        "work_around": [
          {
            "lang": "en",
            "value": "There are no available workarounds for this issue."
          }
        ]
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
    "assignerShortName": "juniper",
    "cveId": "CVE-2020-1668",
    "datePublished": "2020-10-16T20:31:29.123Z",
    "dateReserved": "2019-11-04T00:00:00.000Z",
    "dateUpdated": "2024-09-16T18:18:08.122Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}

CVE-2020-1625 (GCVE-0-2020-1625)

Vulnerability from cvelistv5 – Published: 2020-04-08 19:25 – Updated: 2024-09-17 01:10
VLAI
Title
Junos OS: Kernel memory leak in virtual-memory due to interface flaps
Summary
The kernel memory usage represented as "temp" via 'show system virtual-memory' may constantly increase when Integrated Routing and Bridging (IRB) is configured with multiple underlay physical interfaces, and one interface flaps. This memory leak can affect running daemons (processes), leading to an extended Denial of Service (DoS) condition. Usage of "temp" virtual memory, shown here by a constantly increasing value of outstanding Requests, can be monitored by executing the 'show system virtual-memory' command as shown below: user@junos> show system virtual-memory |match "fpc|type|temp" fpc0: -------------------------------------------------------------------------- Type InUse MemUse HighUse Requests Size(s) temp 2023 431K - 10551 16,32,64,128,256,512,1024,2048,4096,65536,262144,1048576,2097152,4194304,8388608 fpc1: -------------------------------------------------------------------------- Type InUse MemUse HighUse Requests Size(s) temp 2020 431K - 6460 16,32,64,128,256,512,1024,2048,4096,65536,262144,1048576,2097152,4194304,8388608 user@junos> show system virtual-memory |match "fpc|type|temp" fpc0: -------------------------------------------------------------------------- Type InUse MemUse HighUse Requests Size(s) temp 2023 431K - 16101 16,32,64,128,256,512,1024,2048,4096,65536,262144,1048576,2097152,4194304,8388608 fpc1: -------------------------------------------------------------------------- Type InUse MemUse HighUse Requests Size(s) temp 2020 431K - 6665 16,32,64,128,256,512,1024,2048,4096,65536,262144,1048576,2097152,4194304,8388608 user@junos> show system virtual-memory |match "fpc|type|temp" fpc0: -------------------------------------------------------------------------- Type InUse MemUse HighUse Requests Size(s) temp 2023 431K - 21867 16,32,64,128,256,512,1024,2048,4096,65536,262144,1048576,2097152,4194304,8388608 fpc1: -------------------------------------------------------------------------- Type InUse MemUse HighUse Requests Size(s) temp 2020 431K - 6858 16,32,64,128,256,512,1024,2048,4096,65536,262144,1048576,2097152,4194304,8388608 This issue affects Juniper Networks Junos OS: 16.1 versions prior to 16.1R7-S6; 17.1 versions prior to 17.1R2-S11, 17.1R3-S1; 17.2 versions prior to 17.2R2-S8, 17.2R3-S3; 17.2X75 versions prior to 17.2X75-D44; 17.3 versions prior to 17.3R2-S5, 17.3R3-S6; 17.4 versions prior to 17.4R2-S5, 17.4R3; 18.1 versions prior to 18.1R3-S7; 18.2 versions prior to 18.2R2-S5, 18.2R3; 18.2X75 versions prior to 18.2X75-D33, 18.2X75-D411, 18.2X75-D420, 18.2X75-D60; 18.3 versions prior to 18.3R1-S5, 18.3R2-S3, 18.3R3; 18.4 versions prior to 18.4R2-S2, 18.4R3; 19.1 versions prior to 19.1R1-S3, 19.1R2; 19.2 versions prior to 19.2R1-S3, 19.2R2. This issue does not affect Juniper Networks Junos OS 12.3 and 15.1.
CWE
  • CWE-400 - Uncontrolled Resource Consumption
Assigner
juniper CNA under the mitre root
CNA scorecard B 84/100 over 193 records in the last 180 days details
References
URL Tags
https://kb.juniper.net/JSA11004 x_refsource_CONFIRM
Impacted products
Vendor Product Version
Juniper Networks Junos OS Affected: 16.1 , < 16.1R7-S6 (custom)
Affected: 17.1 , < 17.1R2-S11, 17.1R3-S1 (custom)
Affected: 17.2 , < 17.2R2-S8, 17.2R3-S3 (custom)
Affected: 17.2X75 , < 17.2X75-D44 (custom)
Affected: 17.3 , < 17.3R2-S5, 17.3R3-S6 (custom)
Affected: 17.4 , < 17.4R2-S5, 17.4R3 (custom)
Affected: 18.1 , < 18.1R3-S7 (custom)
Affected: 18.2 , < 18.2R2-S5, 18.2R3 (custom)
Affected: 18.2X75 , < 18.2X75-D33, 18.2X75-D411, 18.2X75-D420, 18.2X75-D60 (custom)
Affected: 18.3 , < 18.3R1-S5, 18.3R2-S3, 18.3R3 (custom)
Affected: 18.4 , < 18.4R2-S2, 18.4R3 (custom)
Affected: 19.1 , < 19.1R1-S3, 19.1R2 (custom)
Affected: 19.2 , < 19.2R1-S3, 19.2R2 (custom)
Create a notification for this product.
Date Public
2020-04-08 00:00
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2024-08-04T06:46:29.963Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "tags": [
              "x_refsource_CONFIRM",
              "x_transferred"
            ],
            "url": "https://kb.juniper.net/JSA11004"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "product": "Junos OS",
          "vendor": "Juniper Networks",
          "versions": [
            {
              "lessThan": "16.1R7-S6",
              "status": "affected",
              "version": "16.1",
              "versionType": "custom"
            },
            {
              "lessThan": "17.1R2-S11, 17.1R3-S1",
              "status": "affected",
              "version": "17.1",
              "versionType": "custom"
            },
            {
              "lessThan": "17.2R2-S8, 17.2R3-S3",
              "status": "affected",
              "version": "17.2",
              "versionType": "custom"
            },
            {
              "lessThan": "17.2X75-D44",
              "status": "affected",
              "version": "17.2X75",
              "versionType": "custom"
            },
            {
              "lessThan": "17.3R2-S5, 17.3R3-S6",
              "status": "affected",
              "version": "17.3",
              "versionType": "custom"
            },
            {
              "lessThan": "17.4R2-S5, 17.4R3",
              "status": "affected",
              "version": "17.4",
              "versionType": "custom"
            },
            {
              "lessThan": "18.1R3-S7",
              "status": "affected",
              "version": "18.1",
              "versionType": "custom"
            },
            {
              "lessThan": "18.2R2-S5, 18.2R3",
              "status": "affected",
              "version": "18.2",
              "versionType": "custom"
            },
            {
              "lessThan": "18.2X75-D33, 18.2X75-D411, 18.2X75-D420, 18.2X75-D60",
              "status": "affected",
              "version": "18.2X75",
              "versionType": "custom"
            },
            {
              "lessThan": "18.3R1-S5, 18.3R2-S3, 18.3R3",
              "status": "affected",
              "version": "18.3",
              "versionType": "custom"
            },
            {
              "lessThan": "18.4R2-S2, 18.4R3",
              "status": "affected",
              "version": "18.4",
              "versionType": "custom"
            },
            {
              "lessThan": "19.1R1-S3, 19.1R2",
              "status": "affected",
              "version": "19.1",
              "versionType": "custom"
            },
            {
              "lessThan": "19.2R1-S3, 19.2R2",
              "status": "affected",
              "version": "19.2",
              "versionType": "custom"
            }
          ]
        }
      ],
      "configurations": [
        {
          "lang": "en",
          "value": "Minimum configuration required:\n\n  set interfaces irb"
        }
      ],
      "datePublic": "2020-04-08T00:00:00.000Z",
      "descriptions": [
        {
          "lang": "en",
          "value": "The kernel memory usage represented as \"temp\" via \u0027show system virtual-memory\u0027 may constantly increase when Integrated Routing and Bridging (IRB) is configured with multiple underlay physical interfaces, and one interface flaps. This memory leak can affect running daemons (processes), leading to an extended Denial of Service (DoS) condition. Usage of \"temp\" virtual memory, shown here by a constantly increasing value of outstanding Requests, can be monitored by executing the \u0027show system virtual-memory\u0027 command as shown below: user@junos\u003e show system virtual-memory |match \"fpc|type|temp\" fpc0: -------------------------------------------------------------------------- Type InUse MemUse HighUse Requests Size(s) temp 2023 431K - 10551 16,32,64,128,256,512,1024,2048,4096,65536,262144,1048576,2097152,4194304,8388608 fpc1: -------------------------------------------------------------------------- Type InUse MemUse HighUse Requests Size(s) temp 2020 431K - 6460 16,32,64,128,256,512,1024,2048,4096,65536,262144,1048576,2097152,4194304,8388608 user@junos\u003e show system virtual-memory |match \"fpc|type|temp\" fpc0: -------------------------------------------------------------------------- Type InUse MemUse HighUse Requests Size(s) temp 2023 431K - 16101 16,32,64,128,256,512,1024,2048,4096,65536,262144,1048576,2097152,4194304,8388608 fpc1: -------------------------------------------------------------------------- Type InUse MemUse HighUse Requests Size(s) temp 2020 431K - 6665 16,32,64,128,256,512,1024,2048,4096,65536,262144,1048576,2097152,4194304,8388608 user@junos\u003e show system virtual-memory |match \"fpc|type|temp\" fpc0: -------------------------------------------------------------------------- Type InUse MemUse HighUse Requests Size(s) temp 2023 431K - 21867 16,32,64,128,256,512,1024,2048,4096,65536,262144,1048576,2097152,4194304,8388608 fpc1: -------------------------------------------------------------------------- Type InUse MemUse HighUse Requests Size(s) temp 2020 431K - 6858 16,32,64,128,256,512,1024,2048,4096,65536,262144,1048576,2097152,4194304,8388608 This issue affects Juniper Networks Junos OS: 16.1 versions prior to 16.1R7-S6; 17.1 versions prior to 17.1R2-S11, 17.1R3-S1; 17.2 versions prior to 17.2R2-S8, 17.2R3-S3; 17.2X75 versions prior to 17.2X75-D44; 17.3 versions prior to 17.3R2-S5, 17.3R3-S6; 17.4 versions prior to 17.4R2-S5, 17.4R3; 18.1 versions prior to 18.1R3-S7; 18.2 versions prior to 18.2R2-S5, 18.2R3; 18.2X75 versions prior to 18.2X75-D33, 18.2X75-D411, 18.2X75-D420, 18.2X75-D60; 18.3 versions prior to 18.3R1-S5, 18.3R2-S3, 18.3R3; 18.4 versions prior to 18.4R2-S2, 18.4R3; 19.1 versions prior to 19.1R1-S3, 19.1R2; 19.2 versions prior to 19.2R1-S3, 19.2R2. This issue does not affect Juniper Networks Junos OS 12.3 and 15.1."
        }
      ],
      "exploits": [
        {
          "lang": "en",
          "value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-400",
              "description": "CWE-400 Uncontrolled Resource Consumption",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2020-04-09T23:09:15.000Z",
        "orgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
        "shortName": "juniper"
      },
      "references": [
        {
          "tags": [
            "x_refsource_CONFIRM"
          ],
          "url": "https://kb.juniper.net/JSA11004"
        }
      ],
      "solutions": [
        {
          "lang": "en",
          "value": "The following software releases have been updated to resolve this specific issue: 16.1R7-S6, 17.1R2-S11, 17.1R3-S1, 17.2R2-S8, 17.2R3-S3, 17.2X75-D44, 17.3R2-S5, 17.3R3-S6, 17.4R2-S5, 17.4R3, 18.1R3-S7, 18.2R2-S5, 18.2R3, 18.2X75-D33, 18.2X75-D411, 18.2X75-D420, 18.2X75-D60, 18.3R1-S5, 18.3R2-S3, 18.3R3, 18.4R2-S2, 18.4R3, 19.1R1-S3, 19.1R2, 19.2R1-S3, 19.2R2, 19.3R1, and all subsequent releases."
        }
      ],
      "source": {
        "advisory": "JSA11004",
        "defect": [
          "1407000"
        ],
        "discovery": "USER"
      },
      "title": "Junos OS: Kernel memory leak in virtual-memory due to interface flaps",
      "workarounds": [
        {
          "lang": "en",
          "value": "There are no viable workarounds for this issue."
        }
      ],
      "x_generator": {
        "engine": "Vulnogram 0.0.9"
      },
      "x_legacyV4Record": {
        "CVE_data_meta": {
          "ASSIGNER": "sirt@juniper.net",
          "DATE_PUBLIC": "2020-04-08T16:00:00.000Z",
          "ID": "CVE-2020-1625",
          "STATE": "PUBLIC",
          "TITLE": "Junos OS: Kernel memory leak in virtual-memory due to interface flaps"
        },
        "affects": {
          "vendor": {
            "vendor_data": [
              {
                "product": {
                  "product_data": [
                    {
                      "product_name": "Junos OS",
                      "version": {
                        "version_data": [
                          {
                            "version_affected": "\u003c",
                            "version_name": "16.1",
                            "version_value": "16.1R7-S6"
                          },
                          {
                            "version_affected": "\u003c",
                            "version_name": "17.1",
                            "version_value": "17.1R2-S11, 17.1R3-S1"
                          },
                          {
                            "version_affected": "\u003c",
                            "version_name": "17.2",
                            "version_value": "17.2R2-S8, 17.2R3-S3"
                          },
                          {
                            "version_affected": "\u003c",
                            "version_name": "17.2X75",
                            "version_value": "17.2X75-D44"
                          },
                          {
                            "version_affected": "\u003c",
                            "version_name": "17.3",
                            "version_value": "17.3R2-S5, 17.3R3-S6"
                          },
                          {
                            "version_affected": "\u003c",
                            "version_name": "17.4",
                            "version_value": "17.4R2-S5, 17.4R3"
                          },
                          {
                            "version_affected": "\u003c",
                            "version_name": "18.1",
                            "version_value": "18.1R3-S7"
                          },
                          {
                            "version_affected": "\u003c",
                            "version_name": "18.2",
                            "version_value": "18.2R2-S5, 18.2R3"
                          },
                          {
                            "version_affected": "\u003c",
                            "version_name": "18.2X75",
                            "version_value": "18.2X75-D33, 18.2X75-D411, 18.2X75-D420, 18.2X75-D60"
                          },
                          {
                            "version_affected": "\u003c",
                            "version_name": "18.3",
                            "version_value": "18.3R1-S5, 18.3R2-S3, 18.3R3"
                          },
                          {
                            "version_affected": "\u003c",
                            "version_name": "18.4",
                            "version_value": "18.4R2-S2, 18.4R3"
                          },
                          {
                            "version_affected": "\u003c",
                            "version_name": "19.1",
                            "version_value": "19.1R1-S3, 19.1R2"
                          },
                          {
                            "version_affected": "\u003c",
                            "version_name": "19.2",
                            "version_value": "19.2R1-S3, 19.2R2"
                          }
                        ]
                      }
                    }
                  ]
                },
                "vendor_name": "Juniper Networks"
              }
            ]
          }
        },
        "configuration": [
          {
            "lang": "en",
            "value": "Minimum configuration required:\n\n  set interfaces irb"
          }
        ],
        "data_format": "MITRE",
        "data_type": "CVE",
        "data_version": "4.0",
        "description": {
          "description_data": [
            {
              "lang": "eng",
              "value": "The kernel memory usage represented as \"temp\" via \u0027show system virtual-memory\u0027 may constantly increase when Integrated Routing and Bridging (IRB) is configured with multiple underlay physical interfaces, and one interface flaps. This memory leak can affect running daemons (processes), leading to an extended Denial of Service (DoS) condition. Usage of \"temp\" virtual memory, shown here by a constantly increasing value of outstanding Requests, can be monitored by executing the \u0027show system virtual-memory\u0027 command as shown below: user@junos\u003e show system virtual-memory |match \"fpc|type|temp\" fpc0: -------------------------------------------------------------------------- Type InUse MemUse HighUse Requests Size(s) temp 2023 431K - 10551 16,32,64,128,256,512,1024,2048,4096,65536,262144,1048576,2097152,4194304,8388608 fpc1: -------------------------------------------------------------------------- Type InUse MemUse HighUse Requests Size(s) temp 2020 431K - 6460 16,32,64,128,256,512,1024,2048,4096,65536,262144,1048576,2097152,4194304,8388608 user@junos\u003e show system virtual-memory |match \"fpc|type|temp\" fpc0: -------------------------------------------------------------------------- Type InUse MemUse HighUse Requests Size(s) temp 2023 431K - 16101 16,32,64,128,256,512,1024,2048,4096,65536,262144,1048576,2097152,4194304,8388608 fpc1: -------------------------------------------------------------------------- Type InUse MemUse HighUse Requests Size(s) temp 2020 431K - 6665 16,32,64,128,256,512,1024,2048,4096,65536,262144,1048576,2097152,4194304,8388608 user@junos\u003e show system virtual-memory |match \"fpc|type|temp\" fpc0: -------------------------------------------------------------------------- Type InUse MemUse HighUse Requests Size(s) temp 2023 431K - 21867 16,32,64,128,256,512,1024,2048,4096,65536,262144,1048576,2097152,4194304,8388608 fpc1: -------------------------------------------------------------------------- Type InUse MemUse HighUse Requests Size(s) temp 2020 431K - 6858 16,32,64,128,256,512,1024,2048,4096,65536,262144,1048576,2097152,4194304,8388608 This issue affects Juniper Networks Junos OS: 16.1 versions prior to 16.1R7-S6; 17.1 versions prior to 17.1R2-S11, 17.1R3-S1; 17.2 versions prior to 17.2R2-S8, 17.2R3-S3; 17.2X75 versions prior to 17.2X75-D44; 17.3 versions prior to 17.3R2-S5, 17.3R3-S6; 17.4 versions prior to 17.4R2-S5, 17.4R3; 18.1 versions prior to 18.1R3-S7; 18.2 versions prior to 18.2R2-S5, 18.2R3; 18.2X75 versions prior to 18.2X75-D33, 18.2X75-D411, 18.2X75-D420, 18.2X75-D60; 18.3 versions prior to 18.3R1-S5, 18.3R2-S3, 18.3R3; 18.4 versions prior to 18.4R2-S2, 18.4R3; 19.1 versions prior to 19.1R1-S3, 19.1R2; 19.2 versions prior to 19.2R1-S3, 19.2R2. This issue does not affect Juniper Networks Junos OS 12.3 and 15.1."
            }
          ]
        },
        "exploit": [
          {
            "lang": "en",
            "value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
          }
        ],
        "generator": {
          "engine": "Vulnogram 0.0.9"
        },
        "impact": {
          "cvss": {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        },
        "problemtype": {
          "problemtype_data": [
            {
              "description": [
                {
                  "lang": "eng",
                  "value": "CWE-400 Uncontrolled Resource Consumption"
                }
              ]
            }
          ]
        },
        "references": {
          "reference_data": [
            {
              "name": "https://kb.juniper.net/JSA11004",
              "refsource": "CONFIRM",
              "url": "https://kb.juniper.net/JSA11004"
            }
          ]
        },
        "solution": [
          {
            "lang": "en",
            "value": "The following software releases have been updated to resolve this specific issue: 16.1R7-S6, 17.1R2-S11, 17.1R3-S1, 17.2R2-S8, 17.2R3-S3, 17.2X75-D44, 17.3R2-S5, 17.3R3-S6, 17.4R2-S5, 17.4R3, 18.1R3-S7, 18.2R2-S5, 18.2R3, 18.2X75-D33, 18.2X75-D411, 18.2X75-D420, 18.2X75-D60, 18.3R1-S5, 18.3R2-S3, 18.3R3, 18.4R2-S2, 18.4R3, 19.1R1-S3, 19.1R2, 19.2R1-S3, 19.2R2, 19.3R1, and all subsequent releases."
          }
        ],
        "source": {
          "advisory": "JSA11004",
          "defect": [
            "1407000"
          ],
          "discovery": "USER"
        },
        "work_around": [
          {
            "lang": "en",
            "value": "There are no viable workarounds for this issue."
          }
        ]
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
    "assignerShortName": "juniper",
    "cveId": "CVE-2020-1625",
    "datePublished": "2020-04-08T19:25:57.980Z",
    "dateReserved": "2019-11-04T00:00:00.000Z",
    "dateUpdated": "2024-09-17T01:10:41.507Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}

Mitigation
Architecture and Design

Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended. A strong authentication and access control model will help prevent such attacks from occurring in the first place. The login application should be protected against DoS attacks as much as possible. Limiting the database access, perhaps by caching result sets, can help minimize the resources expended. To further limit the potential for a DoS attack, consider tracking the rate of requests received from users and blocking requests that exceed a defined rate threshold.

Mitigation
Architecture and Design
  • Mitigation of resource exhaustion attacks requires that the target system either:
  • recognizes the attack and denies that user further access for a given amount of time, or
  • uniformly throttles all requests in order to make it more difficult to consume resources more quickly than they can again be freed.
  • The first of these solutions is an issue in itself though, since it may allow attackers to prevent the use of the system by a particular valid user. If the attacker impersonates the valid user, they may be able to prevent the user from accessing the server in question.
  • The second solution is simply difficult to effectively institute -- and even when properly done, it does not provide a full solution. It simply makes the attack require more resources on the part of the attacker.
Mitigation
Architecture and Design

Ensure that protocols have specific limits of scale placed on them.

Mitigation
Implementation

Ensure that all failures in resource allocation place the system into a safe posture.

CAPEC-147: XML Ping of the Death

An attacker initiates a resource depletion attack where a large number of small XML messages are delivered at a sufficiently rapid rate to cause a denial of service or crash of the target. Transactions such as repetitive SOAP transactions can deplete resources faster than a simple flooding attack because of the additional resources used by the SOAP protocol and the resources necessary to process SOAP messages. The transactions used are immaterial as long as they cause resource utilization on the target. In other words, this is a normal flooding attack augmented by using messages that will require extra processing on the target.

CAPEC-227: Sustained Client Engagement

An adversary attempts to deny legitimate users access to a resource by continually engaging a specific resource in an attempt to keep the resource tied up as long as possible. The adversary's primary goal is not to crash or flood the target, which would alert defenders; rather it is to repeatedly perform actions or abuse algorithmic flaws such that a given resource is tied up and not available to a legitimate user. By carefully crafting a requests that keep the resource engaged through what is seemingly benign requests, legitimate users are limited or completely denied access to the resource.

CAPEC-492: Regular Expression Exponential Blowup

An adversary may execute an attack on a program that uses a poor Regular Expression(Regex) implementation by choosing input that results in an extreme situation for the Regex. A typical extreme situation operates at exponential time compared to the input size. This is due to most implementations using a Nondeterministic Finite Automaton(NFA) state machine to be built by the Regex algorithm since NFA allows backtracking and thus more complex regular expressions.